Process orders in the weekend moving during the night in APO/PPT1

Hello Gurus,
I have a problem on the scheduling of production orders when these orders are scheduled
on the week end.
Problem description: 
On day 1 the short term planner schedules production orders in PPT1 (APO) on the
week end.
During the night these production orders are re-exploded in ECC (see: COR2 => Read
Master Data)
On day 2 the end production date of orders that were in the week end, have moved
by the system to the Sunday night.
Step 1: The order is scheduled on the week end on Saturday 14 March 2015.
Step 2: We explode the order in ECC
In ECC, we have:
But if we check the order in APO, we have:
You can see that the process order are placed at the night of sunday, also if in ECC after explosion was always where was planned.
Have you any idea how to avoid that the process order moving in APO ?
Thanks Gurus.
Livio

Hi
You may have 2 settlement rules for CO Products... So ensure you enter PA Trf Str at all the places... This error is never thrown by SAP w/o valid reason
br, Ajay M

Similar Messages

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • TS1967 When trying to recover a lost iTunes library file, the programme moved all the normal contents of iTunes folder to the desktop. Now what must I do?

    When trying to recover a lost iTunes library file, the programme moved all the normal contents of iTunes folder to the desktop. Now what must I do? There is no iTunes Library.itl file. On the desktop it is labelled iTunes Library.xml. Several others files have appeared there too including iTunes Music Library.xml
    Before I can use the programme is it necessary to take another step?
    Thanks for advice.

    Don't worry. I'm all for caution. I guess I should have asked a little more about what steps you took while trying to recover your lost library?
    The permissions thing may be a red herring, but if there is a problem with file access rights to the designated media folder iTunes has been known to place files on the desktop instead since it can access this location. The most common cause for such problems is working with a folder on an NTFS drive via a differnt account or on a different computer. In the normal course of events folders created inside user profiles have limited rights for other users.
    Here are the typical layouts for the iTunes folders:
    Normally the iTunes folder will be created at <User's Music>\iTunes with the media folder inside it. The library files should all appear in the same place so your comment about there not being an iTunes Library.itl file is confusing. Is it just the case that the .itl extension is hidden? The two .xml files makes sense from the above and indicates that the active library is not in <User's Music>\iTunes, but you have a recovered file from when it was.
    If, in fact, the situation is that your desktop is acting as the main iTunes folder, and contains the library file, Album Artwork, iTunes Media and (optionally) Previous iTunes Libraries folders, with all other content being inside the iTunes Media folder, then it should be relativly easy to rearrange your into the correct shape and move them to the correct location.
    If things are more complex, with something other than a library folder containing a media folder, then reestablishing the normal order is more complicated. The iTunes consolidate function is used to bring copies of files stored outside of the media folder into the media folder. It may sometimes be needed as part of the process of tidying up, however it leaves behind originals. There are circumstances where there isn't room for two complete sets of the media files on the same drive which is why I suggested the script might be useful as it produces the same results for the library without leaving the originals for manual clear up.
    I think before you do anything however, we should get a clearer picture of exactly what is where. Could you perhaps take a screenshot of the desktop and post it here? Take a look at this post on making a split library portable. The same techniques I outline there can be used to lick your library into shape, it is just a question of working out which to use in which order for the best effect.
    tt2

  • Redetermine the exchange rates during the billing.

    Hi
    I would like to redetermine the exchange rates during the billing.
    When we are creating a sales order we are maintaining exchange rate in sales order header, but in case of any change in rates
    I have to change it in sales orders first and then i have to create an invoice. Instead of doing this i would like the exchange rates
    to be redetermined during billing automatically.
    Please help
    Suresh

    Hi,
          Firstly let us know If you want to redetermine the pricing exchange rate or the exchange rate to accounting? I imagine that the pricing exchange rate you are talking about ,the pricing exchange rate type should definetely work no matter  what the  pricing source is . Normal sales cycle always has the price source as order, which controls from where and in what sequence the conditions from the reference documents are copied to the billing document. It does not control the exchange rate. Check the billing date in your sales order(its always advisable to take the service rendered date as the base to calculate the exhcange rate which is PGI date when a delivery is involved) , not the actual billed date. If you want the system to determine the exhcange rate on the date when the Invoice has been raised(Different from the billing date in the sales order) then go for the option of "E" which will take the service rendered date.
    But If you want the exchange rate for accounting then you have to append a routine at the item level in "VTFL" .The Logic would be to read the exchange rate from TCURR table using the function module "READ_EXCHANGE_RATE. If you have specified the exchage rate in the header(Accouting tab) of the sales order this gets copied to the billing document This is SAP standard behaviour. To over write this you have to go for the routine ammendment as suggested above.(In case of billing dates and the exchange rates differ). Kindly please let me know If you need any more help on this.
    Regards
    Ram Pedarla

  • I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I am having an issue as well, I think it is ongoing for everyone who is trying to update.

  • How can I disable the behance pics during the startup of my CC 2014 programmes?

    When I start my photoshop cc 2014 and illustrator and all other apps, there ware always some behance pics from users.
    is there a way to disable them?
    thanks a lot
    alex

    hi sarah,
    thanks for getting back to me.
    i mean these images:
    when the programmes are starting up…
    thanks a lot for your help
    alex
    Am 08.01.2015 um 16:05 schrieb SarahBehance1 <[email protected]>:
    How can I disable the behance pics during the startup of my CC 2014 programmes?
    created by SarahBehance1 in Behance - View the full discussion
    HI Alex - can you send a screenshot of what you're seeing? I'm not sure what you're referring to.
    Talk to you soon, thanks!
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7077548#7077548 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7077548#7077548
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Behance by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
    Alex an der Haas
    Art Direction
    // Die Goldkinder
    // Ausdenken und Machen.
    // Mollardgasse 85A / Stiege 3 / Top 142, 1060 Wien
    // Tel: +43 (0) 1 595.37.07
    // Mob: +43 (0) 699.816.366.31
    // http://www.diegoldkinder.at

  • I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental "A Thousand Words" because it is authorized to play on another computer or device." any ideas?

    I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?

    Rentals can only play on one device/computer at a time.  Have you tried to play on the computer and still have that window open?
    Have you transferred the rental to iPod/iPhone or iPad to watch?
    If it won't play anywhere contact iTunes support at:
    expresslane.apple.com
    AC

  • When typing I will sometimes look at the document and find the curser moved and the typing is going on in a different area.  How do I stop that curser movement?

    When typing I will sometimes look at the document and find the curser moved.  The typing has been happening in the wrong place.  How do I stop the curser movement while typing?

    You're not the only person asking this question. You might want to read this post, which contains possible solutions, and references support documents:
    https://discussions.apple.com/thread/2322020?start=0&tstart=0
    Others have the same question as you. Post here if this information answered your question; post also if you have any additional questions!

  • Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was.

    Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

    Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing  the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

  • How can I reset the age entered during the first configuration set up?

    how can i reset the age entered during the first configuration of a brand new i pod touch. The age is incorrect and does not allow me to open a new i-tunes at a later configuration step. Error meesage: you are not old enough to open a new i-tunes account.
    Thanks for support to solve the problem.

    - Terminate the setup for obtain the account and then try again with same email address.
    - Next would be to contact iTunes.
    Contact iTunes

  • I cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

    i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

    I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.

  • [svn:fx-trunk] 9127: Fixes bug in Slider animation where we would set the actual value during the animation , ignoring any snapInterval setting.

    Revision: 9127
    Author:   [email protected]
    Date:     2009-08-05 17:25:39 -0700 (Wed, 05 Aug 2009)
    Log Message:
    Fixes bug in Slider animation where we would set the actual value during the animation, ignoring any snapInterval setting. The fix uses the pendingValue property to hold the animated value, which makes the slider look correct, but no actual value update is sent until the animation completes.
    QE notes: None
    Doc notes: None
    Bugs: SDK-21776
    Reviewer: Hans
    Tests run: checkintests, Mustella (gumbo/components/Slider)
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21776
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

    Revision: 9127
    Author:   [email protected]
    Date:     2009-08-05 17:25:39 -0700 (Wed, 05 Aug 2009)
    Log Message:
    Fixes bug in Slider animation where we would set the actual value during the animation, ignoring any snapInterval setting. The fix uses the pendingValue property to hold the animated value, which makes the slider look correct, but no actual value update is sent until the animation completes.
    QE notes: None
    Doc notes: None
    Bugs: SDK-21776
    Reviewer: Hans
    Tests run: checkintests, Mustella (gumbo/components/Slider)
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21776
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • Why has the keyboard moved up the screen?

    Why has the keyboard moved up the screen, blocking screens that I'm typing on? Is there a way of reverting to how it was at the bottom of the screen?

    I beleive you use the keyboard key to,drag it down, yes. You can simply drag the two sides together if the keyboard is split.
    Like I said, I have it turned off. Never use either setting.

  • HT1449 When moving your iTunes Media folder to an external drive should the itl file be moved during the organise library process too?

    I have moved all of the iTunes data to the drive, but can't seem to find the .itl folder when trying to make external drive the location for my music for a new computer.
    Can anyone please assist on letting me know where the .itl file would have been copied to or whether, if I copy the .itl folder separately, would it keep play counts and ratings?
    Thanks

    Many people confuse moving their media folder with moving their library.  A library is everything inside the iTunes folder.  Unless you have a specific reason for not wanting to move the entire library it is best to do that rather than just media.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 and making an iTunes library portable.
    If you move only media then the main library files remain on the computer.  If you want to move the whole library:
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to choose a library, then select the copied iTunes folder.
    If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)

Maybe you are looking for

  • Pdf portfolio source file name and date in file details

    Is it possible to import the source file name and extension as well as the source file created date in the portfolio file details?  Need to document source to portfolio in working with 3rd parties that will only have the original source.  Need to doc

  • ALV GRID Tool bar options not working

    Hello Experts, I copied the standard tool bar into my program with the name 'ZSALV_STANDARD' and displaying the output in the grid format in a container with the method set_table_for_first_display When I execute the program the standard buttong in th

  • Search help in online interactive form...

    Hi Friends, I am facing a strange issue with search help. I have created a Dictionary based interface and included the field for which i want search help. I have created a search help and attached at the context of webdynpro. I dragged and dropped th

  • Dynamic Column Names - Table Maintenance - SM31

    Hey Everyone - I hope you are all having a good day ) Basically I have a custom Z table containing a number of different fields. I have created table maintenance for this table so it can be updated via SM31. This table is a generic mapping table that

  • Interactive Analysis error when using BW BEx query as data source

    Hello, When we try to create a new report based on a BW BEx with the "Interactive Analaysis" tool in the BO 4.0 Launchpad, for all the BEx queries created under one of our multiproviders, we get the following error: The DSL Service returned an error: