Process portal/spaces for GA release

Where can I find more information about installation and configuration of process portal/spaces?
The BPM 11g installation guide section 3.2 on using BPM with WebCenter is very sparse. I cannot locate the document and section it refers to for more details: " 'Configuring Process Portal on WebCenter Spaces' in Oracle Fusion Middleware Patching Guide"

Hi,
The error is occuring in the program file SAPLHRXSS_PER_MAC.
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred 
in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:      
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."    
Information on where terminated                                              
    The termination occurred in the ABAP program "SAPMSSY1" in               
     "REMOTE_FUNCTION_CALL".                                                 
    The main program was "SAPMSSY1 ".
This place  where it has terminated is highlighted in bold letters.                                       
form remote_function_call using value(type).   
  do.                                          
  test if sy-xprog and sy-xform are set      
  sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
<b>    call 'RfcImport' id 'Type' field type.     </b>
    perform (sy-xform) in program (sy-xprog).  
    rsyn >scont sysc 00011111 0.               
  enddo.                                       
endform.                                       
Thanks,
Manoj

Similar Messages

  • How To Configure Oracle BPM 11g Process Portal on Oracle WebCenter Spaces

    After setting the file process-portal-install.properties and have set the path environment variable to the ANT.
    When i execute a command ant -f install.xml i can see the next error
    [exec] Updating deployment targets for the datasources...
    [exec] This Exception occurred at Tue Dec 18 14:32:49 EST 2012.
    [exec] javax.management.InvalidAttributeValueException: Array has at least one null element
    [exec] Problem invoking WLST - Traceback (innermost last):
    [exec] File "/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/wc-post-install.py", line 253, in ?
    [exec] File "/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/wc-post-install.py", line 112, in updateTargets
    [exec] File "", line 581, in set
    [exec] File "", line 1847, in raiseWLSTException
    [exec] WLSTException: Error occured while performing set : Error setting attribute Targets : Array has at least one null element
    [exec] Use dumpStack() to view the full stacktrace
    [exec]
    BUILD FAILED
    /opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/install.xml:207: exec returned: 1
    Someone know the cause of this error??
    Thanks in advance

    Hi;
    I belive you can follow this thread if you insist to make 11g installation on ubuntu. But as installation documents refer Ubuntu is not a certified platform yet for 11gr2,you can find details on below docs. (I suggest use OEL platform which is free and certified wiht Oracle 11gR2 db)
    http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/pre_install.htm#CIHFICFD
    Certified platform for 11gR2
    On Linux x86:
    Asianux Server 3 SP2
    Oracle Enterprise Linux 4 Update 7
    Oracle Enterprise Linux 5 Update 2
    Red Hat Enterprise Linux 4 Update 7
    Red Hat Enterprise Linux 5 Update 2
    SUSE Linux Enterprise Server 10 SP2
    SUSE Linux Enterprise Server 11
    On Linux x86-64
    Asianux Server 3 SP2
    Oracle Enterprise Linux 4 Update 7
    Oracle Enterprise Linux 5 Update 2
    Red Hat Enterprise Linux 4 Update 7
    Red Hat Enterprise Linux 5 Update 2
    SUSE Linux Enterprise Server 10 SP2
    SUSE Linux Enterprise Server 11
    Regard
    Helios

  • Portal extension plugin for JDeveloper release 10.1.3

    Metalink Note:356550.1 says 'The expected time of arrival is second quarter 2006' [for portal extension plugin for JDeveloper release 10.1.3].
    When will this be available for customer use? We notice it can already be downloaded from an internal Oracle website.
    Thanks,
    Jon

    Hi,
    expectation is this month or early next year. The version of JDeveloper is 10.1.3.2. Maybe if you ask this question on the portal forum they have a more precise date
    Frank

  • Hard drive disk space for DVD processing

    I have only a few Gb available on my boot drive but I have a large external hard drive with over 300 Gb free space on which I have my DVD projects. I get the error message that my drive does not contain enough space for burn processing. Is there any way to tell iDVD to use the external drive for this, since it has more than enough space?

    Is there any way to tell iDVD to use the external drive for this, since it has more than enough space?
    No -- and by the way, if you only have 'a few Gb available' on your boot drive, you may possible get into problems with the OS. The general rule of thumb is to keep from 10% to 15% of your boot hard drive free for OS use.

  • Hi,I have uploaded an app build for pre release  and its still under processing So i uploaded a new build but still the issues is not resolved.Please help...Thanks

    Hi,
    I have uploaded an app build for pre release  and its still under processing So i uploaded a new build but still the issues is not resolved.
    Please help...
    Thanks

    Hi smithin, 
    Thanks for visiting Apple Support Communities. 
    It sounds like you've submitted an iOS application to the App Store, which is being processed, but there's an unresolved issue.
    For additional help with this situation, Apple Developers can use the contact methods on this page:
    https://developer.apple.com/contact/
    All the best,
    Jeremy 

  • Error message while starting IPM managed server and WebCenter Portal Spaces

    Hi,
    1. I am getting an error message when i try to start IPM_server1 in Oracle ECM. The message is as follows in the Command Prompt :
    <Mar 6, 2013 5:05:50 PM AST> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracl
    e\MiddlewareNew6Release1\oracle_common\atgpf\modules\oracle.applcore.model_11.1.1\oracle.applcore.model.stub.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    2. When after some time the imaging server starts and i try to login it does not accept the username and password provided for EM. and login is unsuccessfull always.
    Regarding my other issue is with Webcenter portal spaces :
    1. I have installed WC_Spaces under the same UCM_domain where all other Managed servers are there.
    2. When i try to login it always takes me to a screen which says : Internal error (stating some numbers regarding date & time). Please contact your administrator.
    Need to fix these 2 issues very soon. Help will be greatly appreciated.
    Thanks.

    Hi Satendra,
    Is upgradation the only solution?No, it is one of the better options (and my personal suggestion) as PS2 release is more stable and has many more functionalities and features than PS1. The error which you are getting may be due to a corrupt installation. In case you want to solve this error only and do not want to go for upgrade, then feel free to raise a case with support.
    Regards,
    Anuj

  • Clob temporary table space is not released

    In our java web application, it uses datasource to call oralce stored procedure and get back data in Clob data type. The oracle version is 8.1.7.4. After the database call, the database connection is closed. But I found that the tablespace for Clob data is not released. Right now it becomes a critical issue of our production database. Anybody has any clue? Really appreciate.

    Team,
    We have a table of size 550gigs in size and we truncated the table , truncated sucessfully but space is not released in os level, what action we can take to release the space and this table has only one row and contains the binary data.
    Thanks
    PGR
    Hello,
    Yes space wont be released immediately .If large extents are in picture which I assume is your case it goes into deferred drop a background process which will execute after some time( time may vary).See below link for details.
    As per BOL if extents are more than 128 it goes in deferred drop.
    http://msdn.microsoft.com/en-us/library/ms177495.aspx
    You should wait for some time .keep checking the free space
    Below discussion will surely help you in understanding.See Jonathan's reply
    http://social.msdn.microsoft.com/Forums/en-US/4aa2537e-246b-4bfe-818d-3482531d9149/sql-server-2005-massive-400gb-table-dropped-space-not-released
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Space is not released after truncating the table

    Team,
    We have a table of size 550gigs in size and we truncated the table , truncated sucessfully but space is not released in os level, what action we can take to release the space and this table has only one row and contains the binary data.
    Thanks
    PGR

    Team,
    We have a table of size 550gigs in size and we truncated the table , truncated sucessfully but space is not released in os level, what action we can take to release the space and this table has only one row and contains the binary data.
    Thanks
    PGR
    Hello,
    Yes space wont be released immediately .If large extents are in picture which I assume is your case it goes into deferred drop a background process which will execute after some time( time may vary).See below link for details.
    As per BOL if extents are more than 128 it goes in deferred drop.
    http://msdn.microsoft.com/en-us/library/ms177495.aspx
    You should wait for some time .keep checking the free space
    Below discussion will surely help you in understanding.See Jonathan's reply
    http://social.msdn.microsoft.com/Forums/en-US/4aa2537e-246b-4bfe-818d-3482531d9149/sql-server-2005-massive-400gb-table-dropped-space-not-released
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • How to activate Extended Rebate Processing in Customizing for billing?

    sap gurus:
    How to activate Extended Rebate Processing in Customizing for billing?

    SAP Knowledge Base Article
    1520390 - Activation of Enhanced Rebate Functionalities - IMG Customizing Transactions - SAP Menu
    Version 1 Validity: 19.10.2010 - active
    Language English
    Symptom
    Enhanced Rebate Functionality is not available and should be activated
    In the customizing IMG (Transaction SPRO) the node for Extended Rebate with the relevant customizing transactions are not visible
    The SAP Menu does not include the transactions for Extended Rebate
    Environment Enterprise Function EA-ISE must be available in the system (visible in transaction SFW5).
    Reproducing the Issue
    Call transaction SPRO
    Node Extended Rebate Processing is missing:
    IMG
    Sales and Distribution
       > Billing
            > Rebate Processing
                 > .................
    Resolution To activate the Extended Rebate Processing and make the node and customizing transactions visible proceed in the following way:
    Call transaction SFW5   
    In the folder ENTERPRISE_EXTENSIONS choose the function EA-ISE
    Activate this enterprise extension
    Thereafter the menu path in SPRO for Extended Rebate Processing will be visible:
    IMG
    Sales and Distribution
       > Billing
            > Rebate Processing
                > Extended Rebate Processing
                            * Settings for Agreement Types
                            * Set up Variable Key for Rebate Settlement
                            * Check Variable Key for Rebate Settlement
                            * Activate Extended Rebate Processing
                            * Simulate And Execute Reorganization of Statistical Data
    Furthermore the users will have the relevant transactions available in the SAP Menu:
    SAP menu
      > Logistics
         > Sales and Distribution
              > Billing
                   > Rebate 
                        > Extended Rebate Processing
                             * RBT_ENH_VB7 - Extended Rebate Settlement
                             * RBT_ENH_ACT - Update of Indirect Sales
                             * RBT_ENH_PLAN - Update of Indirect Planning Data
    For futher infomation on the extended rebate process please refer to the following links of SAP help portal:                     
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/5a/5b9b3c0f4da40ee10000000a11405a/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/79/a5ee3c1f63a518e10000000a11405a/frameset.htm
    Keywords
    Extended rebate agreement, extended rebate processing, erweiterte Bonusabwicklung, Menü, Pfad nicht vorhanden, aktivieren, erweiterter Bonus, Bonusabsprache
    Header Data
    Released On
    21.10.2010 08:01:20
    Release Status
    Released to Customer
    Component
    SD-BIL-RB-ENH Enhanced Rebates
    Other Components
       SD-BIL-RB Rebate Processing
    Priority
    Normal
    Category
    How To
    Product    
    Product
    Product Version
    SAP ERP Central Component
    All versions
    SAP R/3 Enterprise 4.7
    All versions

  • Deleted photos space is not released

    Delete all photos, delete also recently eliminated. But when I enter phone information photographs still occupy almost a gig and says I have 680 photos on the device. If I look at using iTunes tells me the same. How can I do to free that memory space?
    Thank You.

    Team,
    We have a table of size 550gigs in size and we truncated the table , truncated sucessfully but space is not released in os level, what action we can take to release the space and this table has only one row and contains the binary data.
    Thanks
    PGR
    Hello,
    Yes space wont be released immediately .If large extents are in picture which I assume is your case it goes into deferred drop a background process which will execute after some time( time may vary).See below link for details.
    As per BOL if extents are more than 128 it goes in deferred drop.
    http://msdn.microsoft.com/en-us/library/ms177495.aspx
    You should wait for some time .keep checking the free space
    Below discussion will surely help you in understanding.See Jonathan's reply
    http://social.msdn.microsoft.com/Forums/en-US/4aa2537e-246b-4bfe-818d-3482531d9149/sql-server-2005-massive-400gb-table-dropped-space-not-released
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Error in "Checking Availabe Space for the DB2 UDB for Unix..." phase

    Hello,
    We are in the middle of an Upgrade proyect from R/3 4.6C (kernet 4.6D EXT) to ECC 6.0.
    As a first step we are doing an Heterogenous System Copy to migrate from servers with HP-UX B11.11/Informix 9.4 to servers with AIX 5.3/DB2 UDB 8.
    We already did the database import with no errors. When we are installing R3 4.6C in the target server we are getting u201CMemory Fault (coredump)u201D error in the u201CChecking Availabe Space for the DB2 UDB for Unix, Windows Tablespacesu201D phase.
    Any advice will be appreciated.
    Best Regards
    Francisco

    Hello Paul,
    There is no db2diag.log. We are in the first steps of the installation.
    Operating System logs just shows an ABNORMALY TERMINATION OF SOTWARE error.
    This is the CEDBMIG.log
    INFO 2010-08-04 10:12:00 CommandFileController SyFileCopy:150
        Copying source file CEDBMIG.R3S to target file CEDBMIG.R3S.30 ...
    INFO 2010-08-04 10:12:01 Main
        Preparation successfully completed.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
        checking host name lookup for 'sapqas'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
        offical host name for 'sapqas' is 'sapqas'.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
        host 'sapqas' has ip address '172.26.26.64'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
        offical host name for '172.26.26.64' is 'sapqas'.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
        checking host name lookup for 'sapqas'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
        offical host name for 'sapqas' is 'sapqas'.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
        host 'sapqas' has ip address '172.26.26.64'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
        offical host name for '172.26.26.64' is 'sapqas'.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
        checking host name lookup for 'sapqas'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
        offical host name for 'sapqas' is 'sapqas'.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
        host 'sapqas' has ip address '172.26.26.64'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
        offical host name for '172.26.26.64' is 'sapqas'.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
        checking host name lookup for 'sapqas'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
        offical host name for 'sapqas' is 'sapqas'.
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
        host 'sapqas' has ip address '172.26.26.64'
    INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
        offical host name for '172.26.26.64' is 'sapqas'.
    INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
        The CD KERNEL will not be copied.
    INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
        The CD RDBMS will not be copied.
    INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
        The CD EXPORT1 will not be copied.
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
        Creating coprocess /usr/sbin/lsattr -El sys0 -a realmem  ...
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:100
        The process lsattr puts out:
         realmem 8388608 Amount of usable physical memory in Kbytes False
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:700
        Physical RAM size is 8192 MB.
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:100
        Retrieving swap space size ...
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
        Creating coprocess /usr/sbin/lsps -s  ...
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
        The process lsps puts out:
         Total Paging Space   Percent Used
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
        The process lsps puts out:
               8192MB               1%
    INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:500
        Currently activated swap space is 8192 MB.
    INFO 2010-08-04 10:12:31 CENTRDBINSTANCE_IND_DB6 InternalWarmKeyCheck:0
        The installation phase is starting now. Please look in the log
        file for further information about current actions.
    INFO 2010-08-04 10:12:31
        Requesting Installation Details
    INFO 2010-08-04 10:12:31
        Reading and Checking DB2 UDB for UNIX, Windows Specific Keys
    INFO 2010-08-04 10:12:31
        Select the DB2 Storage Management.
    INFO 2010-08-04 10:12:31
        Choose the number of storage paths for DB2's Automatic Storage
        Management.
    INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
        The CD KERNEL will not be copied.
    INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
        The CD RDBMS will not be copied.
    INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
        The CD EXPORT1 will not be copied.
    INFO 2010-08-04 10:12:31
        Requesting Information on CD-ROMs
    INFO 2010-08-04 10:12:31
        Calculating RAM Distribution
    INFO 2010-08-04 10:12:31
        Creating the Service Entry for the Dispatcher
    INFO 2010-08-04 10:12:31
        Creating the Service Entry for the Gateway Service
    INFO 2010-08-04 10:12:31
        Creating the Service Entry for the Secure Gateway Service
    INFO 2010-08-04 10:12:31
        Creating the Service Entry for the Message Server
    INFO 2010-08-04 10:12:31
        Creating the SAP Administration Group sapsys
    INFO 2010-08-04 10:12:32
        Creating the Database Administration Group db<dbsid>adm
    INFO 2010-08-04 10:12:32
        Creating the Group db<dbsid>ctl
    INFO 2010-08-04 10:12:32
        Creating the Group db<dbsid>mnt
    INFO 2010-08-04 10:12:32
        Creating the SAP connect user
    INFO 2010-08-04 10:12:32
        Setting Password of the SAP connect user
    INFO 2010-08-04 10:12:32
        Creating the db2<sapsid> User
    INFO 2010-08-04 10:12:32
        Setting the User Password
    INFO 2010-08-04 10:12:32
        Creating the SAP System Administrator
    INFO 2010-08-04 10:12:32
        Setting Password for for the SAP System Administrator
    INFO 2010-08-04 10:12:32
        Creating Directories
    INFO 2010-08-04 10:12:32
        Creating Symbolic Links
    INFO 2010-08-04 10:12:32
        Getting Minimal Size of the Database
    INFO 2010-08-04 10:12:32
        Changing DB2 UDB for UNIX, Windows Tablespace Data
    INFO 2010-08-04 10:12:32
        Checking if Required Directories Exist
    INFO 2010-08-04 10:12:32
        Checking Available Space for the SAP Instance
    INFO 2010-08-04 10:12:32
        Checking Available Space for the DB2 UDB for UNIX, Windows
        Tablespaces
    This is the CEDBMIG.R3S log
    120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
    130_SOURCE=@DB_HOME@/.cshrc
    130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
    200_SOURCE=@DB_HOME@/.profile
    200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
    210_SOURCE=@DB_HOME@/.profile
    210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
    [Z_OSUSERSIDADMENVIRONMENT_IND_DB6]
    100_GROUP=sapsys
    100_OWNER=@LOWER_SAPSYSTEMNAME@adm
    100_PERMISSION=0644
    100_SOURCE=@HOME@/.login
    100_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
    110_SOURCE=@HOME@/.login
    110_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
    120_GROUP=sapsys
    120_OWNER=@LOWER_SAPSYSTEMNAME@adm
    120_PERMISSION=0644
    120_SOURCE=@HOME@/.cshrc
    120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
    130_SOURCE=@HOME@/.cshrc
    130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
    200_SOURCE=@HOME@/.profile
    200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
    210_SOURCE=@HOME@/.profile
    210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
    [Z_R3DIRECTORIES_IND_IND]
    101_PATH=@SAPDIR@
    101_PERMISSION=0775
    101_SET_FILE_ATTRIBUTES=YES
    101_USERGROUP=sapsys
    101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    102_PATH=@SAPDIR@/tmp
    103_PATH=@SAPDIR@/trans
    104_PATH=@SAPDIR@/trans/tmp
    104_SET_FILE_ATTRIBUTES=NO
    105_PATH=@SAPDIR@/trans/EPS
    106_PATH=@SAPDIR@/trans/EPS/in
    107_PATH=@SAPDIR@/trans/EPS/out
    108_PATH=@SAPDIR@/trans/EPS/log
    109_PATH=@SAPDIR@/trans/bin
    110_PATH=@SAPDIR@/trans/buffer
    111_PATH=@SAPDIR@/trans/cofiles
    112_PATH=@SAPDIR@/trans/data
    113_PATH=@SAPDIR@/trans/etc
    114_PATH=@SAPDIR@/trans/log
    115_PATH=@SAPDIR@/trans/sapnames
    120_PATH=@SAPDIR@/@SAPSYSTEMNAME@
    120_PERMISSION=0751
    120_SET_FILE_ATTRIBUTES=YES
    121_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
    121_PERMISSION=0755
    122_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe
    123_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/opt
    124_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen
    125_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/opt
    126_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/dbg
    127_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/src
    128_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
    129_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/data
    130_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/log
    131_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
    131_PERMISSION=0775
    132_PATH=@SAPMOUNT@
    140_PATH=@SAPMOUNTEXE@
    141_PATH=@SAPMOUNTPROFILE@
    141_PERMISSION=0755
    142_PATH=@SAPMOUNTGLOBAL@
    142_PERMISSION=0700
    150_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/sec
    160_PATH=@STARTDIRECTORY@
    160_PERMISSION=0777
    [Z_R3DIRPERMISSIONS_IND_IND]
    101_CHANGE_ON_NFS=NO
    101_PATH=@SAPMOUNT@
    101_PERMISSION=0755
    101_TRAVERSE=
    101_USERGROUP=sapsys
    101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    102_CHANGE_ON_NFS=NO
    102_PATH=@SAPMOUNTEXE@
    102_PERMISSION=0755
    102_TRAVERSE=
    102_USERGROUP=sapsys
    102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    103_CHANGE_ON_NFS=NO
    103_PATH=@SAPMOUNTGLOBAL@
    103_PERMISSION=0710
    103_TRAVERSE=
    103_USERGROUP=db@LOWER_DB_SID@adm
    103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    104_CHANGE_ON_NFS=NO
    104_PATH=@SAPMOUNTPROFILE@
    104_PERMISSION=0755
    104_TRAVERSE=
    104_USERGROUP=sapsys
    104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    105_CHANGE_ON_NFS=NO
    105_PATH=@SAPDIR@/@SAPSYSTEMNAME@
    105_PERMISSION=0755
    105_TRAVERSE=
    105_USERGROUP=sapsys
    105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    120_CHANGE_ON_NFS=NO
    120_PATH=@HOME@
    120_PERMISSION=0700
    120_TRAVERSE=
    120_USERGROUP=sapsys
    120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    121_CHANGE_ON_NFS=NO
    121_PATH=@HOME@
    121_PERMISSION=0777
    121_TRAVERSE=FILES
    121_USERGROUP=sapsys
    121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    130_CHANGE_ON_NFS=NO
    130_PATH=@STARTDIRECTORY@
    130_PERMISSION=0777
    130_TRAVERSE=
    130_USERGROUP=sapsys
    130_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    140_CHANGE_ON_NFS=YES
    140_PATH=@SAPDIR@/trans
    140_PERMISSION=0775
    140_TRAVERSE=
    140_USERGROUP=sapsys
    140_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    141_CHANGE_ON_NFS=YES
    141_PATH=@SAPDIR@/trans/bin
    141_PERMISSION=0775
    141_TRAVERSE=
    141_USERGROUP=sapsys
    141_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    [Z_R3FILEPERMISSIONS_IND_IND]
    101_CHANGE_ON_NFS=NO
    101_PATH=@SAPMOUNTEXE@
    101_PERMISSION=0755
    101_TRAVERSE=SUBDIRECTORIES
    101_USERGROUP=sapsys
    101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    102_CHANGE_ON_NFS=NO
    102_PATH=@SAPMOUNTEXE@
    102_PERMISSION=0755
    102_TRAVERSE=FILES
    102_USERGROUP=sapsys
    102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    103_CHANGE_ON_NFS=NO
    103_PATH=@SAPMOUNTGLOBAL@
    103_PERMISSION=0700
    103_USERGROUP=sapsys
    103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    104_CHANGE_ON_NFS=NO
    104_PATH=@SAPMOUNTPROFILE@
    104_PERMISSION=0755
    104_TRAVERSE=SUBDIRECTORIES
    104_USERGROUP=sapsys
    104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    105_CHANGE_ON_NFS=NO
    105_PATH=@SAPMOUNTPROFILE@
    105_PERMISSION=0755
    105_TRAVERSE=FILES
    105_USERGROUP=sapsys
    105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    106_CHANGE_ON_NFS=NO
    106_PATH=@SAPMOUNTEXE@/saposcol
    106_PERMISSION=04755
    106_USERGROUP=sapsys
    106_USERNAME=root
    112_CHANGE_ON_NFS=NO
    112_PATH=@SAPDIR@/@SAPSYSTEMNAME@
    112_PERMISSION=0751
    112_TRAVERSE=SUBDIRECTORIES
    112_USERGROUP=sapsys
    112_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    113_CHANGE_ON_NFS=NO
    113_PATH=@SAPDIR@/@SAPSYSTEMNAME@
    113_PERMISSION=0751
    113_TRAVERSE=FILES
    113_USERGROUP=sapsys
    113_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    114_CHANGE_ON_NFS=NO
    114_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
    114_PERMISSION=0755
    114_TRAVERSE=SUBDIRECTORIES
    114_USERGROUP=sapsys
    114_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    115_CHANGE_ON_NFS=NO
    115_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
    115_PERMISSION=0755
    115_TRAVERSE=FILES
    115_USERGROUP=sapsys
    115_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    116_CHANGE_ON_NFS=NO
    116_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
    116_PERMISSION=0755
    116_TRAVERSE=SUBDIRECTORIES
    116_USERGROUP=sapsys
    116_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    117_CHANGE_ON_NFS=NO
    117_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
    117_PERMISSION=0755
    117_TRAVERSE=FILES
    117_USERGROUP=sapsys
    117_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    118_CHANGE_ON_NFS=NO
    118_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
    118_PERMISSION=0775
    118_USERGROUP=sapsys
    118_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    120_CHANGE_ON_NFS=NO
    120_PATH=@HOME@
    120_PERMISSION=0700
    120_USERGROUP=sapsys
    120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    121_CHANGE_ON_NFS=NO
    121_PATH=@HOME@
    121_PERMISSION=0700
    121_TRAVERSE=FILES
    121_USERGROUP=sapsys
    121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
    [Z_R3LINKS_IND_IND]
    101_LINKCONTENT=@SAPMOUNTEXE@
    101_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/dbg
    102_LINKCONTENT=dbg
    102_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/run
    103_LINKCONTENT=@SAPMOUNTGLOBAL@
    103_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/global
    104_LINKCONTENT=@SAPMOUNTPROFILE@
    104_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/profile
    [Z_SAPDATAPATH]
    S1=/db2/@SAPSYSTEMNAME@/sapdata1
    S2=/db2/@SAPSYSTEMNAME@/sapdata2
    S3=/db2/@SAPSYSTEMNAME@/sapdata3
    S4=/db2/@SAPSYSTEMNAME@/sapdata4
    S5=/db2/@SAPSYSTEMNAME@/sapdata5
    S6=/db2/@SAPSYSTEMNAME@/sapdata6
    SAPDATAT=/db2/@SAPSYSTEMNAME@/sapdatat
    As you can see there is not an error message, the installation simply stops when the try to check the space available for tablespaces.
    Regards

  • Could not reserve enough space for object heap in Jdeveloper 11g R1

    Hi,
    I tried to increase the JVM heap size with Virtual machine = server and the value as -Xmx512m -XX:MaxPermSize=512M -Djbo.debugoutput=console in the project properties->Run/Debug/Profile->Default-Edit, but still getting the below error.
    Any help is appreciated.
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;D:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;d:\source\FCUBSInstaller.jar;D:\Olite10g_1\MOBILE\Sdk\bin\OLITE40.JAR;;
    PATH=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;D:\Oracle\MIDDLE~1\JDK160~1.5-3\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1.5-3\bin;D:\Olite10g_1\jre\1.4.2\bin\client;D:\Olite10g_1\jre\1.4.2\bin;D:\Software\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Windows Imaging\;D:\software\Clearcase 7.0\common;D:\software\Clearcase 7.0\ClearCase\bin;D:\Olite10g_1\MOBILE\sdk\bin;C:\Program Files\Liquid Technologies\Liquid XML Studio 2011\XmlDataBinder9\Redist9\cpp\win32\bin;D:\Software\Liquid Technologies\Liquid XML Studio 2011\XmlDataBinder9\Redist9\cpp\win32\bin;D:\software\oracle10g\BIN;D:\Jdev10g\jdk\bin;;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_14"
    Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
    Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
    Starting WLS with line:
    D:\Oracle\MIDDLE~1\JDK160~1.5-3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Xmx512m -XX:MaxPermSize=512M -Djbo.debugoutput=console -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\software\oracle\product\10.2.0\client_1\modules\oracle.ossoiap_11.1.1,D:\software\oracle\product\10.2.0\client_1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\oracle\store\gmds -Xms512m -Xmx512m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Process exited.

    This is telling you that there is not enough memory for the heap size you've specified. Increasing the heap size makes this worse, not better. You need more physical memory.
    john

  • Best practices to reduce downtime for Database releases(rolling changes)

    Hi,
    What are best practices to reduce downtime for database releases on 10.2.0.3? What DB changes can be rolling and what can't?
    Thanks in advance.
    Regards,
    RJiv.

    I would be very dubious about any sort of universal "best practices" here. Realistically, your practices need to be tailored to the application and the environment.
    You can invest a lot of time, energy, and resources into minimizing downtime if that is the only goal. But you'll generally pay for that goal in terms of developer and admin time and effort, environmental complexity, etc. And you generally need to architect your application with rolling upgrades in mind, which necessitates potentially large amounts of redesign to existing applications. It may be perfectly acceptable to go full-bore into minimizing downtime if you are running Amazon.com and any downtime is unacceptable. Most organizations, however, need to balance downtime against other needs.
    For example, you could radically minimize downtime by having a second active database, configuring Streams to replicate changes between the two master databases, and configure the middle tier environment so that you can point different middle tier servers against one or the other database. When you want to upgrade, you point all the middle tier servers against database A other than 1 that lives on a special URL. You upgrade database B (making sure to deal with the Streams replication environment properly depending on requirements) and do the smoke test against the special URL. When you determine that everything works, you configure all the app servers to point at B and have Streams replication process configured to replicate changes from the old data model to the new data model), upgrade B, repeat the smoke test, and then return the middle tier environment to the normal state of balancing between databases.
    This lets you upgrade with 0 downtime. But you've got to license another primary database. And configure Streams. And write the replication code to propagate the changes on B during the time you're smoke testing A. And you need the middle tier infrastructure in place. And you're obviously going to be involving more admins than you would for a simpler deploy where you take things down, reboot, and bring things up. The test plan becomes more complicated as well since you need to practice this sort of thing in lower environments.
    Justin

  • I am trying to burn a dvd and it will not allow me to do this because it states that i do not have enough space for encoding disk. how do i free up space and from where?

    I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?

    iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process.  25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
    To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
    Please note that iDVD can't use and external hard drive for this "scratch space".

  • JavaFX Studio 1.0.2 plug-in for Eclipse released

    JavaFX Studio 1.0.2 plug-in for Eclipse released (free)
    Release info: [http://mkblog.exadel.com/tools/exadel-javafx-studio-plug-in-for-eclipse-102-released/]
    Download: [http://exadel.com/web/portal/javafxstudio]

    Have you already tested it? Is it better than netbeans plug-in? What are the new features and why I should change to plug-in for Eclipse?
    Best regards,
    André Rezende

Maybe you are looking for