Process q001 started up but failed with error = 20

Dear All,
I am facing the following error in my alert log file. I am using oracle database 10.1.
Process q001 started up but failed with error = 20
Process q002 started up but failed with error = 20
Tue May 18 12:11:53 2010
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
Process q001 started up but failed with error = 20
users unable to connect to database.....
Regards

This may be due to AQ_TM_PROCESSES parameter.
what is value of AQ_TM_PROCESSES parameter..
Also paste value of processes parameter.
Also login as sysdba and give output of :
select * from v$resource_limit;
Regards
Rajesh
Edited by: Rajesh Lathwal on May 18, 2010 12:48 PM

Similar Messages

  • Process m000 started up but failed with error = 20

    Hi,
    Could anybody tell me what does this mean ?
    Process m000 started up but failed with error = 20
    Thu Aug 1 15:22:34 2007
    Process q000 started up but failed with error = 20
    Process q000 started up but failed with error = 20
    Process q000 started up but failed with error = 20
    Thanks,
    P.

    Check metalink note 334704.1
    https://metalink.oracle.com/metalink/plsql/f?p=130:14:4536502596857368347::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,334704.1,1,1,1,helvetica

  • Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

    premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."   Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

    Jurgen Freund
    Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
    I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
    How to fix the ERROR 126 when you open OpenGL programs - YouTube
    The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
    LoadLibrary failed with error 126: cant find the required
    Please let us know if that worked for you.
    Thank you.
    ATR
    Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

  • I can register an OCX file in Windows 7 x64 without incident but with Windows 7 x32 I get a p-up that says "DllRegisterServer failed with error code: 0x80004005. What gives???

    Hey yeah.  not much else to say.  The title says it all.
    I'm trying to register an OCX file that my video editing application requires to work properly.
    I'm using a  Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files.  Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
    But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
    Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

    I don't know what happened. 
    My Video Editing software was working fine a few days ago in Windows 7 x64.  Tried using it this morning....couldn't load the .mpg video clip.  Just stood there looking stupid like it does in the 32-bit version of Windows 7.
    I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool".  I made a TV recording then used the Video Editor to edit it and it worked fine.  Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all.  This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

  • Windows.Launch contract failed with error: The app didn't start..

    We have installed windows 8 Prof X64 Edition; none of the Metro apps are not getting launched; the system is added in domain, the event viewer has the below information for one of the app.
    Event Under: Applications
    App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat did not launch within its allotted time.
    Event Under: AppHost
    The App Host has encountered an unexpected error and will terminate. The error is  0x8007000E.
    Event Under: Microsoft-Windows-TWinUI/Operational
    Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat for the Windows.Launch contract failed with error: The app didn't start..
    Regards Ajinkya Ghare MCITP-Server Administrator | MCTS

    Hi,
    Try to put a machine disjoin the domain to see if the same issue occurs.
    Sometimes the Windows 8 machines cannot use metro app once join the domain, you can try this method:
    1- Open "Local Group Policy Editor"
    2-Navigate to "Computer Configuration - Administrative Templates - Network Isolation"
    3- Open "Internet Proxy Servers for Metro Style Apps" and set the value to your proxy server address like 172.16.0.1:8080.
    Regards,
    Leo  
    Huang
    Leo Huang
    TechNet Community Support

  • SSIS fails with error : The process exit code was -1073741701

    Hello All,
    I am having issues with SSIS packages running from SQL agent job.
    The server we are running the job is used for SSIS and there are lot of other SSIS jobs that are running.
    We were able to run the job once successfully and the later runs are failing with the below error.(nothing has been changed) 
    The step did not generate any output.  The return value was unknown.  The process exit code was -1073741701.  The step failed.
    Nothing is being logged in the [catalog].[operations] or operation_messages view. When tuned the profiler ON we do not see the job trying to connect to SSISDB at all. I am assuming that the job is failing much before if does any thing.
    I have moved the package to a different server and ran it with the same proxy account and it works fine there.
    Any help or suggestion on this issue would be helpful.
    Thanks !

    Hi SQL_Help,
    You can run the job once successfully and the later runs are failing with the below error ran it as a Job. “The step did not generate any output.  The return value was unknown.  The process exit code was -1073741701.  The step failed.” It
    was really a generic error message with no information with it.
    We can use Process Monitor and Event Viewer to capture the detail error message. Then based on the error message to fix this issue.  The following similar issue is for your reference:
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2014/05/22/ssis-package-fails-with-error-the-step-did-not-generate-any-output-the-return-value-was-unknown.aspx
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

    Hi,
    process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
                                                                   Save Status and Trigger Events if Appropriate**

    Hi Neha,
    When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
    Save Status and Trigger Events if Appropriate**"
    I have come to know that there is one ABAP programe when we go to manage varient.
    ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

  • Online backup getting failed with error BR0278E - Invalid Argument

    Hi All,
    Online backup in Production system is getting failed when taken using DB13.  Last week the SAP Production Server was migrated to SAN and it was up & running fine.
    SAP System - ECC 6
    OS                - AIX 5.3
    Database      - Oracle 10g
    Even the Archive log backup has been successful, but Online backup is failing.  Following is the error log:
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0057I Backup of database: RTP
    BR0058I BRBACKUP action ID: bebkzprw
    BR0059I BRBACKUP function ID: ant
    BR0110I Backup mode: ALL
    BR0077I Database file for backup: /oracle/RTP/sapbackup/cntrlRTP.dbf
    BR0061I 41 files found for backup, total size 97416.297 MB
    BR0143I Backup type: online
    BR0112I Files will not be compressed
    BR0130I Backup device type: tape
    BR0102I Following backup device will be used: /dev/rmt3.1
    BR0103I Following backup volume will be used: RTPB01
    BR0289I BRARCHIVE will be started at the end of processing
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0208I Volume with name RTPB01 required in device /dev/rmt3.1
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0226I Rewinding tape volume in device /dev/rmt3 ...
    BR0351I Restoring /oracle/RTP/sapbackup/.tape.hdr0
    BR0355I from /dev/rmt3.1 ...
    BR0241I Checking label on volume in device /dev/rmt3.1
    BR0242I Scratch volume in device /dev/rmt3.1 will be renamed to RTPB01
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0226I Rewinding tape volume in device /dev/rmt3 ...
    BR0202I Saving /oracle/RTP/sapbackup/.tape.hdr0
    BR0203I to /dev/rmt3.1 ...
    We have checked using different tapes, restarted SAP, etc but could not resolve it.
    Please suggest further.
    Thanks
    Vamsi

    Hi Vamsi
    Please go through below link
    Re: onLine backup fails with error BR0278E
    There is similar problem with the exact error you are facing for online backup and its solution is given in above link.
    Let us know if this information was useful to you.
    with regards,
    Parin Hariyani

  • Time Machine copy failed with error:28

    Usually I just say OK when Time Machine can't complete a backup in either my computer or my wife's, and a couple of months later I get the irritating message again.
    This time, it keeps returning.   I have no idea what to do:
    Here's a log:
    2/16/13 3:46:23.127 PM com.apple.backupd[1325]: Starting automatic backup
    2/16/13 3:46:23.914 PM com.apple.backupd[1325]: Backing up to: /Volumes/FreeAgent GoFlex Drive/Backups.backupdb
    2/16/13 3:46:29.390 PM AppleMobileSync[1329]: [0x10020c310] |ISyncManager|Warning| Could not retrieve ISyncClient with id com.apple.Keychain!
    2/16/13 3:46:29.398 PM SyncServer[1315]: [0x7fd152c0bec0] |SyncManager|Error| sync alert tool for com.apple.Mail is invalid: can't find /System/Library/Frameworks/Message.framework/Resources/MailSync
    2/16/13 3:46:29.416 PM com.apple.backupd[1325]: Using file event preflight for Macintosh HD
    2/16/13 3:46:36.243 PM com.apple.backupd[1325]: Will copy (8.16 GB) from Macintosh HD
    2/16/13 3:46:36.441 PM com.apple.backupd[1325]: Found 1464 files (8.16 GB) needing backup
    2/16/13 3:46:36.478 PM com.apple.backupd[1325]: 11.28 GB required (including padding), 13.29 GB available
    2/16/13 3:46:43.180 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/Mailboxes/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94014.emlx : No such file or directory
    2/16/13 3:47:09.883 PM mdworker[1337]: Unable to talk to lsboxd
    2/16/13 3:47:09.887 PM mdworker[1335]: Unable to talk to lsboxd
    2/16/13 3:47:09.892 PM mdworker[1336]: Unable to talk to lsboxd
    2/16/13 3:47:09.896 PM mdworker[1334]: Unable to talk to lsboxd
    2/16/13 3:47:10.000 PM kernel[0]: Sandbox: sandboxd(1343) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:47:10.414 PM sandboxd[1343]: ([1337]) mdworker(1337) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:47:10.460 PM sandboxd[1343]: ([1335]) mdworker(1335) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:47:10.525 PM sandboxd[1343]: ([1336]) mdworker(1336) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:47:10.625 PM sandboxd[1343]: ([1334]) mdworker(1334) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:49:19.630 PM mdworker[1359]: Unable to talk to lsboxd
    2/16/13 3:49:19.635 PM mdworker[1360]: Unable to talk to lsboxd
    2/16/13 3:49:19.711 PM sandboxd[1362]: ([1359]) mdworker(1359) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:49:19.716 PM sandboxd[1362]: ([1360]) mdworker(1360) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:49:20.000 PM kernel[0]: Sandbox: sandboxd(1362) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:49:36.358 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
    2/16/13 3:49:38.090 PM SyncServer[1365]: [0x7fc8f0c0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
    2/16/13 3:50:01.568 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 3:50:01.570 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 3:50:28.401 PM mdworker[1368]: Unable to talk to lsboxd
    2/16/13 3:50:28.405 PM mdworker[1367]: Unable to talk to lsboxd
    2/16/13 3:50:28.000 PM kernel[0]: Sandbox: sandboxd(1373) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:50:29.094 PM sandboxd[1373]: ([1368]) mdworker(1368) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:50:29.100 PM sandboxd[1373]: ([1367]) mdworker(1367) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:12.017 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Sent Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94034.emlx : No such file or directory
    2/16/13 3:52:34.652 PM mdworker[1383]: Unable to talk to lsboxd
    2/16/13 3:52:34.884 PM mdworker[1384]: Unable to talk to lsboxd
    2/16/13 3:52:34.939 PM mdworker[1382]: Unable to talk to lsboxd
    2/16/13 3:52:34.950 PM mdworker[1385]: Unable to talk to lsboxd
    2/16/13 3:52:34.997 PM sandboxd[1390]: ([1383]) mdworker(1383) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.003 PM sandboxd[1390]: ([1384]) mdworker(1384) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.008 PM sandboxd[1390]: ([1382]) mdworker(1382) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.013 PM sandboxd[1390]: ([1385]) mdworker(1385) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.000 PM kernel[0]: Sandbox: sandboxd(1390) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:54:21.305 PM Dock[138]: no information back from LS about running process
    2/16/13 3:54:21.309 PM lsboxd[233]: @AE relay 61657674:6f646f63
    2/16/13 3:54:21.000 PM kernel[0]: Sandbox: sandboxd(1401) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:54:24.631 PM com.apple.XType.FontHelper[1406]: FontHelper:  message received. (<dictionary: 0x7ffc64800c60> { count = 2, contents =
        "query" => <string: 0x7ffc64800dc0> { length = 105, contents = "com_apple_ats_name_postscript == "Arial,Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
        "restricted" => <bool: 0x7fff74932320>: true
    2/16/13 3:54:24.632 PM com.apple.XType.FontHelper[1406]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    2/16/13 3:54:24.808 PM com.apple.XType.FontHelper[1406]: FontHelper:  message received. (<dictionary: 0x7ffc64800810> { count = 2, contents =
        "query" => <string: 0x7ffc64800970> { length = 111, contents = "com_apple_ats_name_postscript == "Arial,BoldItalic" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
        "restricted" => <bool: 0x7fff74932320>: true
    2/16/13 3:54:24.809 PM com.apple.XType.FontHelper[1406]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    2/16/13 3:54:25.052 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Preview" for over 1.00 seconds. Server has re-enabled them.
    2/16/13 3:54:25.584 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Preview" after 1.53 seconds (server forcibly re-enabled them after 1.00 seconds)
    2/16/13 3:54:30.628 PM sandboxd[1401]: ([192]) Mail(192) deny file-read-data /Users/HBrazee/Library/Preferences/com.apple.DownloadAssessment.plist
    2/16/13 3:54:49.692 PM mdworker[1411]: Unable to talk to lsboxd
    2/16/13 3:54:49.696 PM mdworker[1410]: Unable to talk to lsboxd
    2/16/13 3:54:49.818 PM sandboxd[1416]: ([1411]) mdworker(1411) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:54:49.823 PM sandboxd[1416]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:54:50.000 PM kernel[0]: Sandbox: sandboxd(1416) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:55:11.964 PM WindowServer[102]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    2/16/13 3:55:11.986 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94057.emlx : No such file or directory
    2/16/13 3:57:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1438[GoogleSoftwareUp] clearing CS_VALID
    2/16/13 3:57:19.177 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
        com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
        com.google.Keystone.Daemon.Administration: 0 connection(s)
    2/16/13 3:57:19.332 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
    2/16/13 3:57:19.445 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
    2/16/13 3:57:19.554 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
        <KSTicket:0x585250
            productID=com.google.Keystone
            version=1.1.0.3659
            xc=<KSPathExistenceChecker:0x582eb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
            serverType=Omaha
            url=https://tools.google.com/service/update2
            creationDate=2010-06-26 00:04:18
        >
    Using server: <KSOmahaServer:0x292b10
        engine=<KSDaemonUpdateEngine:0x287110>
        params={
            EngineVersion = "1.1.0.3659";
            ActivesInfo = {
                "com.Google.GoogleEarthPlus.intel" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                "com.google.Chrome" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                    LastActiveDate = 2012-11-25 19:27:11 +0000;
                    LastActivePingDate = 2012-11-26 08:00:15 +0000;
                "com.google.Keystone" = {
                    LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                    LastActivePingDate = 2013-02-16 08:00:39 +0000;
                    LastActiveDate = 2013-02-16 22:57:18 +0000;
                "com.google.musicmanager" = {
                    LastActivePingDate = 2012-07-29 06:59:48 +0000;
                    LastActiveDate = 2012-07-28 19:04:42 +0000;
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            UserInitiated = 0;
            IsSystem = 1;
            OmahaOSVersion = "10.8.2_i486";
            Identity = KeystoneDaemon;
            AllowedSubdomains = (
                ".omaha.sandbox.google.com",
                ".tools.google.com",
                ".www.google.com",
                ".corp.google.com"
    >
    2/16/13 3:57:19.867 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2973e0
        server=<KSOmahaServer:0x292b10>
        url="https://tools.google.com/service/update2"
        runningFetchers=0
        tickets=1
        activeTickets=0
        rollCallTickets=0
        body=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
                <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                    <o:updatecheck></o:updatecheck>
                </o:app>
            </o:gupdate>
    >
    2/16/13 3:57:29.555 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x298e70
        server=<KSOmahaServer:0x292b10>
        url="https://tools.google.com/service/update2"
        status=200
        tickets=1
        activeTickets=0
        rollCallTickets=0
        data=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
                <daystart elapsed_seconds="53810"></daystart>
                <app appid="com.google.Keystone" status="ok">
                    <updatecheck status="noupdate"></updatecheck>
                </app>
            </gupdate>
    >
    2/16/13 3:57:29.864 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    2/16/13 3:57:29.934 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    2/16/13 3:57:29.937 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    2/16/13 3:57:29.938 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    2/16/13 3:57:29.942 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    2/16/13 3:57:30.431 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
    2/16/13 3:57:30.434 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
    2/16/13 3:57:30.476 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
        <KSTicket:0x28ec80
            productID=com.google.Chrome
            version=24.0.1312.57
            xc=<KSPathExistenceChecker:0x29adc0 path=/Applications/Google Chrome.app>
            serverType=Omaha
            url=https://tools.google.com/service/update2
            creationDate=2010-06-18 13:11:31
            tagPath=/Applications/Google Chrome.app/Contents/Info.plist
            tagKey=KSChannelID
            brandPath=/Library/Google/Google Chrome Brand.plist
            brandKey=KSBrandID
            versionPath=/Applications/Google Chrome.app/Contents/Info.plist
            versionKey=KSVersion
        >,
        <KSTicket:0x29fe80
            productID=com.google.Keystone
            version=1.1.0.3659
            xc=<KSPathExistenceChecker:0x2977f0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
            serverType=Omaha
            url=https://tools.google.com/service/update2
            creationDate=2010-06-26 00:04:18
        >
    Using server: <KSOmahaServer:0x595c80
        engine=<KSDaemonUpdateEngine:0x287110>
        params={
            EngineVersion = "1.1.0.3659";
            ActivesInfo = {
                "com.Google.GoogleEarthPlus.intel" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                "com.google.Chrome" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                    LastActiveDate = 2012-11-25 19:27:11 +0000;
                    LastActivePingDate = 2012-11-26 08:00:15 +0000;
                "com.google.Keystone" = {
                    LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                    LastActivePingDate = 2013-02-16 08:00:39 +0000;
                    LastActiveDate = 2013-02-16 22:57:18 +0000;
                "com.google.musicmanager" = {
                    LastActivePingDate = 2012-07-29 06:59:48 +0000;
                    LastActiveDate = 2012-07-28 19:04:42 +0000;
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            UserInitiated = 0;
            IsSystem = 1;
            OmahaOSVersion = "10.8.2_i486";
            Identity = KeystoneDaemon;
            AllowedSubdomains = (
                ".omaha.sandbox.google.com",
                ".tools.google.com",
                ".www.google.com",
                ".corp.google.com"
    >
    2/16/13 3:57:30.577 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x290140
        server=<KSOmahaServer:0x595c80>
        url="https://tools.google.com/service/update2"
        runningFetchers=0
        tickets=2
        activeTickets=0
        rollCallTickets=0
        body=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
                <o:app appid="com.google.Chrome" version="24.0.1312.57" lang="en-us" installage="974" brand="GGRM">
                    <o:updatecheck></o:updatecheck>
                </o:app>
                <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                    <o:updatecheck></o:updatecheck>
                </o:app>
            </o:gupdate>
    >
    2/16/13 3:57:31.427 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x29a970
        server=<KSOmahaServer:0x595c80>
        url="https://tools.google.com/service/update2"
        status=200
        tickets=2
        activeTickets=0
        rollCallTickets=0
        data=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
                <daystart elapsed_seconds="53812"></daystart>
                <app appid="com.google.Chrome" status="ok">
                    <updatecheck status="noupdate"></updatecheck>
                </app>
                <app appid="com.google.Keystone" status="ok">
                    <updatecheck status="noupdate"></updatecheck>
                </app>
            </gupdate>
    >
    2/16/13 3:57:31.430 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    2/16/13 3:57:31.479 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    2/16/13 3:57:31.480 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    2/16/13 3:57:31.482 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    2/16/13 3:57:31.487 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    2/16/13 3:57:33.732 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
        com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
        com.google.Keystone.Daemon.Administration: 0 connection(s)
    2/16/13 3:57:49.201 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
    2/16/13 3:58:22.082 PM mdworker[1575]: Unable to talk to lsboxd
    2/16/13 3:58:22.088 PM mdworker[1576]: Unable to talk to lsboxd
    2/16/13 3:58:24.000 PM kernel[0]: Sandbox: sandboxd(1580) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:58:25.365 PM sandboxd[1580]: ([1575]) mdworker(1575) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:58:25.469 PM sandboxd[1580]: ([1576]) mdworker(1576) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:59:36.358 PM mdworker[1587]: Unable to talk to lsboxd
    2/16/13 3:59:36.362 PM mdworker[1586]: Unable to talk to lsboxd
    2/16/13 3:59:36.503 PM sandboxd[1588]: ([1587]) mdworker(1587) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:59:36.508 PM sandboxd[1588]: ([1586]) mdworker(1586) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:59:36.000 PM kernel[0]: Sandbox: sandboxd(1588) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:00:08.980 PM firefox[1592]: invalid drawable
    2/16/13 4:00:10.701 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Firefox" for over 1.00 seconds. Server has re-enabled them.
    2/16/13 4:00:10.813 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Firefox" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
    2/16/13 4:00:24.543 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
    2/16/13 4:00:26.787 PM SyncServer[1604]: [0x7f9f7ac0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
    2/16/13 4:00:30.376 PM mdworker[1594]: Unable to talk to lsboxd
    2/16/13 4:00:30.379 PM mdworker[1595]: Unable to talk to lsboxd
    2/16/13 4:00:30.468 PM sandboxd[1606]: ([1594]) mdworker(1594) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:00:30.481 PM sandboxd[1606]: ([1595]) mdworker(1595) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:00:30.000 PM kernel[0]: Sandbox: sandboxd(1606) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:00:43.702 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 4:00:43.705 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 4:01:42.495 PM mdworker[1611]: Unable to talk to lsboxd
    2/16/13 4:01:42.499 PM mdworker[1612]: Unable to talk to lsboxd
    2/16/13 4:01:42.599 PM sandboxd[1613]: ([1611]) mdworker(1611) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:01:42.608 PM sandboxd[1613]: ([1612]) mdworker(1612) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:01:42.000 PM kernel[0]: Sandbox: sandboxd(1613) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:02:01.167 PM WindowServer[102]: CGXSetWindowProperty: Invalid window 0x131
    2/16/13 4:02:01.167 PM WindowServer[102]: kCGErrorIllegalArgument: _CGXAddWindowToWindowOrderingGroup: error setting window property
    2/16/13 4:02:29.971 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
    2/16/13 4:02:29.972 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
    2/16/13 4:02:29.000 PM kernel[0]: HFS: Low Disk: Vol: FreeAgent GoFlex Drive freeblks: 38399, warninglimit: 38400
    2/16/13 4:02:55.923 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
    2/16/13 4:02:55.000 PM kernel[0]: HFS: Vol: FreeAgent GoFlex Drive Very Low Disk: freeblks: 25599, dangerlimit: 25600
    2/16/13 4:02:55.926 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk, very low disk
    2/16/13 4:02:55.929 PM mds[39]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/FreeAgent GoFlex Drive" because it is low on disk space.
    2/16/13 4:03:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1474 [cfprefsd]
    2/16/13 4:03:43.211 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[1406]) Exited: Killed: 9
    2/16/13 4:03:43.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    2/16/13 4:03:43.000 PM kernel[0]: macx_swapon SUCCESS
    2/16/13 4:03:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1406 [XType.FontHelper]
    2/16/13 4:03:52.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    2/16/13 4:03:52.000 PM kernel[0]: macx_swapon SUCCESS
    2/16/13 4:03:52.849 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1218]) Exited: Killed: 9
    2/16/13 4:03:52.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1218 [com.apple.iCloud]
    2/16/13 4:03:53.571 PM mdworker[1619]: Unable to talk to lsboxd
    2/16/13 4:03:53.000 PM kernel[0]: Sandbox: sandboxd(1627) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:03:53.585 PM mdworker[1622]: Unable to talk to lsboxd
    2/16/13 4:03:53.672 PM sandboxd[1627]: ([1619]) mdworker(1619) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:03:53.677 PM sandboxd[1627]: ([1622]) mdworker(1622) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:03:53.690 PM mdworker[1621]: Unable to talk to lsboxd
    2/16/13 4:03:53.692 PM mdworker[1620]: Unable to talk to lsboxd
    2/16/13 4:03:53.711 PM sandboxd[1627]: ([1621]) mdworker(1621) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:03:53.786 PM sandboxd[1627]: ([1620]) mdworker(1620) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
    2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
    2/16/13 4:04:21.928 PM com.apple.backupd[1325]: Stopping backup.
    2/16/13 4:04:21.954 PM com.apple.backupd[1325]: Error: (-34) SrcErr:NO Copying /Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm/winxp-s003.vmdk to /Volumes/FreeAgent GoFlex Drive/Backups.backupdb/Howard Brazee’s Computer/2013-02-15-184254.inProgress/07592BCC-A3D7-4879-B08D-C01FDDF1895A/Maci ntosh HD/Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm
    2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copied 14628 files (14.03 GB) from volume Macintosh HD.
    2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copy stage failed with error:28

    >>> Enter Time Machine and manually delete unnecessary backups to make
    >>> sufficient room for new ones.
    >>
    >>
    >> I haven't figured out how to do this.   Where is this setting?
    >
    > I have not figured this out either. But there is a command line
    > program tmutil (time machine utility) that can delete backups, and
    > also do much more. I am not an expert in this area, so I can only
    > suggest that you open a Terminal.app and type
    >     man tmutil
    >
    > Be careful Howard. If Time Machine is not able to delete old backup
    > jobs, something is wrong with your backup disk.
    If I recall correctly you do this by going on to TM and using one of the
    pull down menus in the top apple menu strip ....
    I myself am having problems with TM. I erased the external target disk and
    started TM again. However it stops wverytime and refuses to backup ..
    Telling me there isn't enough room even though the ext space is much
    bigger. It also quotes the size of my HD content about 20% bigger than
    finder says weird.
    Howard (another one...)
    ============
    1. Enter the time Machine
    2. Scroll back it time for a few generations
    3. Select the folder(s) to delete
    4. Under the "Action" item (or gear icon), select the delete option you
    want.
    =================
    > The last couple of days my Time Machine has run out of space during
    > backups (error 28).
    Just to be certain, is that really "28" or is it "-28"? (I assume it is
    a positive error number, as error -28 is
    > In the past, when I've seen this, I just say OK, and the problem goes away
    > by itself, as it clears up space.
    >
    > My FreeAgent GoFlex Drive is 1 TB, while my Mac drive is 500.11 GB.
    >
    > I tried using Disk Utility to fix permissions, but those buttons were
    > greyed out.   Disk Utility did not find any problem with the disk.
    Repair Permissions is not relevant for Time Machine backups. It only
    repairs permissions on files installed by the OS X Installer application
    (or the OS installation or preinstalled OS, or Software Update). TM
    backups don't qualify.
    In any case, Time Machine deletes old backups using root privileges so
    it doesn't care about permissions on the backup drive.
    > Time Machie preferences show 13.3 GB of 1 TB available.
    >
    > I haven't been adding stuff to my computer lately more than getting
    > mail.
    >
    > Oldest backup:  December 29, 2012
    > Latest backup: February 15, 2013
    >
    > Excluded from backups is the backup drive, my downloads folder, and my
    > Mobile Documents folder.
    >
    > Estimated size of full backup 397.5 GB
    Something odd is happening here. Given your described usage, you should
    not be chewing through 1 TB of backups in less than three months. I've
    gone more than a year on a drive with a similar ratio and not filled it
    (and I am backing up my downloads, sometimes two or three times as I
    move them to other folders).
    Has anything major been done to the computer within that timeframe, e.g.
    installing a new hard drive, or erasing the main drive and restoring
    from backup? If so, that drive is treated as a new one and would require
    another full backup, leaving the old one there.
    A similar possibility is if Time Machine thought the computer had been
    replaced, which would result in a new backup being started, and would
    also leave the old backup unable to be deleted automatically.
    In this case, you wouldn't be able to directly access the backups prior
    to the change using "Enter Time Machine", but could get to them by
    holding down the Option key and choosing "Browse Other Backup Disks"
    from the Time Machine menu.
    > What suggestions do you have for me to resolve this issue.
    Which OS X version are you running?
    Have a look in system.log (using Console) to see if Time Machine logged
    any relevant information when the backup failed. Look for references to
    "backupd" (which is the background software which does Time Machine
    backups).
    =============

  • Flash Player Install failed with error code: 30

    Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks.  I'm posting this so the engineers will know what to fix in the next update version.
    I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
    Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark.  The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
    The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
    The FlashPlayerInstallManager.log says:
    2014-04-13 16:12:01 -0500 [I]  IM: ---------- log start ----------
    2014-04-13 16:12:01 -0500 [I]  IM: All install checks pass
    2014-04-13 16:12:01 -0500 [W]  IM: Unexpected umask value for process: 0
    2014-04-13 16:12:06 -0500 [I]  IM: User does not have any processes that need to be closed.
    2014-04-13 16:12:06 -0500 [I]  IM: [install started]
    2014-04-13 16:12:06 -0500 [E]  RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
    2014-04-13 16:12:06 -0500 [E]  RA:
    Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
        NSFileCreationDate = "2014-03-27 04:20:43 +0000";
        NSFileExtensionHidden = 0;
        NSFileGroupOwnerAccountID = 0;
        NSFileGroupOwnerAccountName = wheel;
        NSFileHFSCreatorCode = 0;
        NSFileHFSTypeCode = 0;
        NSFileModificationDate = "2014-03-27 04:20:43 +0000";
        NSFileOwnerAccountID = 0;
        NSFileOwnerAccountName = root;
        NSFilePosixPermissions = 2541;
        NSFileReferenceCount = 1;
        NSFileSize = 13348;
        NSFileSystemFileNumber = 4892044;
        NSFileSystemNumber = 16777224;
        NSFileType = NSFileTypeRegular;
    2014-04-13 16:12:06 -0500 [E]  RA:
    Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
        NSFileCreationDate = "2014-04-07 13:43:21 +0000";
        NSFileExtensionHidden = 0;
        NSFileGroupOwnerAccountID = 0;
        NSFileGroupOwnerAccountName = wheel;
        NSFileModificationDate = "2014-04-13 21:12:06 +0000";
        NSFileOwnerAccountID = 0;
        NSFileOwnerAccountName = root;
        NSFilePosixPermissions = 449;
        NSFileReferenceCount = 12;
        NSFileSize = 408;
        NSFileSystemFileNumber = 4552991;
        NSFileSystemNumber = 16777224;
        NSFileType = NSFileTypeDirectory;
    2014-04-13 16:12:06 -0500 [E]  IM: [install failed: 30]
    2014-04-13 16:12:06 -0500 [E]  IM: Install failed with error code: 30.
    2014-04-13 16:12:06 -0500 [I]  IM: ----------  log end  ----------

    I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
    Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
    ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
    Using the offline installer completely eliminates the errors seen with the stub installer.

  • Flash CS6 AIR error: CreateWinProcess failed with error 2. The system cannot find the file specified

    I created an AIR application in Adobe Flash CS6, but when I test, debug or publish it, an error always occured.
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    When I clicked OK, Flash suddenly stops responding, so I need to end the process using Task Manager.
    I created a blank FLA document and tested and published it, everything's fine there. It was exported properly. But when I do it with the AIR app, Flash can't even start exporting the SWF of the AIP app, and instead gave me the error.
    I speculate that there is something wrong with the Java command line stuff Flash is doing behind the curtain. I tried using ADL myself and get the AIR app working fine.
    I also found out that Flash has its own JRE installed, so I don't have to bother the JRE used by my computer.
    Is there any way to fix this? Thanks in advance. Have a nice day!

    I installed  the update, but I'm sorry to say that it did not solve the problem
    The error is still there as described by Master §ix and Daniel777
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
    In this case, I can't use the simulator to test the applications,
    thanks

  • Time Machine backups to OS X Server intermittently failing with error 21

    I have a Mac Mini running OS X Server, with two USB drives connected and selected within OS X Server as Time Machine backup destinations.  I have an iMac and a Macbook Air, both of which  are using Time Machine to backup themselves up to the Time Machine Service on the server (all are running the latest version of Mavericks).
    Intermittently, the iMac backup fails.  The iMac's console log shows:
    Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
    Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Waiting 60 seconds and trying again.
    Aug 23 13:56:06 Nigels-iMac.local mds[72]: (Normal) Volume: volume:0x7fa702995000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Backups-1
    Aug 23 13:56:45 Nigels-iMac.local com.apple.backupd[15418]: Network destination already mounted at: /Volumes/Backups-1
    Aug 23 13:57:29 Nigels-iMac.local com.apple.backupd[15418]: Quota in effect for '/Volumes/Backups-1': Zero KB
    Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
    Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Giving up after 3 retries.
    Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Backup failed with error 21: 21
    The Mac Mini console log shows nothing apparently wrong.
    Restarting the server (not the iMac) clears the problem and the iMac will then once again backup to the server for some time (e.g. a day).
    There are two USB drives, one for each backup sparse bundle and although the two disks have different names in the Finder, OS X Server has named them both Backup (one is shown as 'Backup' and the other as 'Backup-1' in the Time Machine Services Backups tab).
    I am wondering whether the failure occurs when coincidentally the iMac and the Macbook both try to back up at the same moment.  Any advice about how to isolate the problem, or a solution would be gratefully received!

    1. This procedure is a diagnostic test, to be carried out on the server. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Client push error CcmSetup failed with error code 0x8007064c

    Installing file 'C:\WINDOWS\ccmsetup\Silverlight.exe' with options '/q'.
    File 'C:\WINDOWS\ccmsetup\Silverlight.exe' returned failure exit code 1612. Fail the installation.
    InstallFromManifest failed 0x8007064c
    ITaskScheduler::Delete failed to delete task Configuration Manager Client Retry Task (0x80070002).
    CcmSetup failed with error code 0x8007064c
    This error i faced while Upgrading client on Windows Server 2003 ,that i upgraded my SCCM 2012 SP1 to SCCM2012 R2 
    i tried to uninstall the client and done successfully , while pushing the client again I've the same Error code.
    i searched and found SMS 2003 toolkit 2 fixed the problem for some people but i did not .

    <![LOG[==========[ ccmsetup started in process 8108 ]==========]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X86]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1837">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
    <![LOG[Launch from folder C:\Setup\Client\]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:727">
    <![LOG[Running on 'Microsoft(R) Windows(R) Server 2003, Standard Edition' (5.2.3790). Service Pack (2.0). SuiteMask = 272. Product Type = 18]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: C:\Setup\Client\ccmsetup.exe  SMSSLP=ldcsccm1v.linkdc.local  SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3775">
    <![LOG[Command line: C:\Setup\Client\ccmsetup.exe  SMSSLP=ldcsccm1v.linkdc.local  SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:4425">
    <![LOG[No version of the client is currently detected.]LOG]!><time="15:37:25.907-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:2748">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9763">

  • CcmSetup failed with error code 0x80072ee7

    How to resolve above issue?
    I noticed that account its using is System but I have CP domain account setup with local admin access to that computer.
    Here's the CCMLog:
    ==========[ ccmsetup started in process 1844 ]==========
    ccmsetup 4/1/2013 6:55:53 PM
    1848 (0x0738)
    CcmSetup version: 5.0.7711.0000 ccmsetup
    4/1/2013 6:55:53 PM 1848 (0x0738)
    Running on OS (5.1.2600). Service Pack (3.0). SuiteMask = 256. Product Type = 1
    ccmsetup 4/1/2013 6:55:53 PM
    1848 (0x0738)
    Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    SslState value: 224 ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
    CCMHTTPPORT:    80 ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
    CCMHTTPSPORT:    443 ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
    CCMHTTPSSTATE:    224 ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
    CCMHTTPSCERTNAME:     ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
    FSP:     ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
    CCMFIRSTCERT:    1 ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
    Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    Retry time:       10 minute(s)
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    MSI log file:     C:\WINDOWS\ccmsetup\client.msi.log
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    MSI properties:    INSTALL="ALL" SMSSITECODE="PRI" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    Source List: ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
                      \\vCM-PRI.contoso.loc\SMSClient
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
                      \\VCM-PRI.CONTOSO.LOC\SMSClient
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    MPs: ccmsetup
    4/1/2013 6:55:54 PM 1848 (0x0738)
                      vCM-PRI.contoso.loc
    ccmsetup 4/1/2013 6:55:54 PM
    1848 (0x0738)
    No version of the client is currently detected.
    ccmsetup 4/1/2013 6:55:56 PM
    1848 (0x0738)
    Updated security on object C:\WINDOWS\ccmsetup\.
    ccmsetup 4/1/2013 6:55:58 PM
    1848 (0x0738)
    A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.
    ccmsetup 4/1/2013 6:55:58 PM
    1848 (0x0738)
    Running as user "SYSTEM"
    ccmsetup 4/1/2013 6:57:23 PM
    284 (0x011C)
    Detected 77336 MB free disk space on system drive.
    ccmsetup 4/1/2013 6:57:23 PM
    284 (0x011C)
    Only one MP vCM-PRI.contoso.loc is specified. Use it.
    ccmsetup 4/1/2013 6:57:23 PM
    284 (0x011C)
    Searching for DP locations from MP(s)... ccmsetup
    4/1/2013 6:57:23 PM 284 (0x011C)
    Current AD site of machine is Default-First-Site-Name
    LocationServices 4/1/2013 6:57:23 PM
    284 (0x011C)
    Local Machine is joined to an AD domain LocationServices
    4/1/2013 6:57:23 PM 284 (0x011C)
    Unable to retrieve AD forest + domain membership
    LocationServices 4/1/2013 6:57:23 PM
    284 (0x011C)
    DhcpGetOriginalSubnetMask entry point not supported.
    LocationServices 4/1/2013 6:57:23 PM
    284 (0x011C)
    Begin checking Alternate Network Configuration
    LocationServices 4/1/2013 6:57:23 PM
    284 (0x011C)
    Finished checking Alternate Network Configuration
    LocationServices 4/1/2013 6:57:23 PM
    284 (0x011C)
    Adapter {B34BA4D3-826D-487E-91DB-6BB818F8F61B} is DHCP enabled. Checking quarantine status.
    LocationServices 4/1/2013 6:57:23 PM
    284 (0x011C)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name=""/>
        <Domain Name=""/>
        <IPAddresses>
    <IPAddress SubnetAddress="192.168.137.0" Address="192.168.137.50"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup
    4/1/2013 6:57:23 PM 284 (0x011C)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{EFA1E87D-54C2-49D0-A9BB-EA4F5113770D}</ID><SourceHost>VXP1</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:VXP1:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>vCM-PRI.contoso.loc</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2013-04-01T22:57:23Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1018"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
    ccmsetup 4/1/2013 6:57:23 PM
    284 (0x011C)
    CCM_POST 'HTTP://vCM-PRI.contoso.loc/ccm_system/request'
    ccmsetup 4/1/2013 6:57:23 PM
    284 (0x011C)
    GetDPLocations failed with error 0x80072ee7
    ccmsetup 4/1/2013 6:57:24 PM
    284 (0x011C)
    Failed to get DP locations as the expected version from MP 'vCM-PRI.contoso.loc'. Error 0x80072ee7
    ccmsetup 4/1/2013 6:57:24 PM
    284 (0x011C)
    Next retry in 10 minute(s)... ccmsetup
    4/1/2013 6:57:24 PM 284 (0x011C)
    Current AD site of machine is Default-First-Site-Name
    LocationServices 4/1/2013 7:07:39 PM
    284 (0x011C)
    Local Machine is joined to an AD domain LocationServices
    4/1/2013 7:07:39 PM 284 (0x011C)
    Unable to retrieve AD forest + domain membership
    LocationServices 4/1/2013 7:07:54 PM
    284 (0x011C)
    DHCP entry points already initialized. LocationServices
    4/1/2013 7:07:54 PM 284 (0x011C)
    Begin checking Alternate Network Configuration
    LocationServices 4/1/2013 7:07:54 PM
    284 (0x011C)
    Finished checking Alternate Network Configuration
    LocationServices 4/1/2013 7:07:54 PM
    284 (0x011C)
    Adapter {B34BA4D3-826D-487E-91DB-6BB818F8F61B} is DHCP enabled. Checking quarantine status.
    LocationServices 4/1/2013 7:07:54 PM
    284 (0x011C)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name=""/>
        <Domain Name=""/>
        <IPAddresses>
    <IPAddress SubnetAddress="192.168.137.0" Address="192.168.137.50"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup
    4/1/2013 7:07:54 PM 284 (0x011C)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{2127E2AF-819A-437B-AB9A-8B3127FD75B7}</ID><SourceHost>VXP1</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:VXP1:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>vCM-PRI.contoso.loc</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2013-04-01T23:07:54Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1018"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    CCM_POST 'HTTP://vCM-PRI.contoso.loc/ccm_system/request'
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    GetDPLocations failed with error 0x80072ee7
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    Failed to find DP locations with error 0x80072ee7, status code 200. Check next MP.
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    Only one MP vCM-PRI.contoso.loc is specified. Use it.
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    Have already tried all MPs. Couldn't find DP locations.
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    GET 'HTTP://vCM-PRI.contoso.loc/CCM_Client/ccmsetup.cab'
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    Failed to send HTTP request. (Error at WinHttpSendRequest: 12007)
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    WinHttpRequestReponse failed with a non-recoverable failure, 12007
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    DownloadFileByWinHTTP failed with error 0x80072ee7
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    A Fallback Status Point has not been specified.  Message with STATEID='308' will not be sent.
    ccmsetup 4/1/2013 7:07:54 PM
    284 (0x011C)
    CcmSetup failed with error code 0x80072ee7
    ccmsetup 4/1/2013 7:07:54 PM
    1848 (0x0738)

    2ee2 is a connection timeout. If your MP is otherwise responsive to clients it could be a database connectivity issue
    on the MP. Ensure you can get to http://sccm.contoso.com from
    a browser on your client machine. You should also check MP_Framework.log and MP_LocationManager.log on the MP if all looks good with the networking on the client side.
    Sharad Singh | My blogs: SharadTech | Twitter:
    @SinghSharaad | | Please mark as helpful/answer if this resolved your issue

  • OPatch failed with error code 72

    Hi,
    i am trying to apply database patches, when ever i am trying to use opatch i am getting below error.
    [oragold@apps OPatch]$ opatch lsinventory
    Invoking OPatch 10.2.0.2.0
    Oracle interim Patch Installer version 10.2.0.2.0
    Copyright (c) 2005, Oracle Corporation. All rights reserved..
    Oracle Home : /u02/oracle/PROD/db/tech_st/10.2.0
    Central Inventory : /home/oragold/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 10.2.0.2.0
    OUI version : 10.2.0.2.0
    OUI location : /u02/oracle/PROD/db/tech_st/10.2.0/oui
    Log file location : /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch-2009_Mar_30_16-28-49-EST_Mon.log
    List of Homes on this system:
    Home name= OraDb10g_home1, Location= "/u02/oracle/PROD/db/tech_st/10.2.0/db/inventory/prereqs"
    Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
    Possible causes are:
    Oracle Home dir. path does not exist in Central Inventory
    Oracle Home is a symbolic link
    Oracle Home inventory is corrupted
    LsInventory Session failed: OracleHomeInventory::load() gets null oracleHomeInfo
    OPatch failed with error code 72

    Sawwan,
    i followed the metalink note which you given above, but i am getting same error
    -r-xr-xr-x 1 oragold dba 27068515 Mar 30 17:57 p6880880_102000_LINUX_OPatchsoftware. zip
    [oragold@apps 10.2.0]$ cd OPatch
    [oragold@apps OPatch]$ ls
    docs jlib opatch opatch.ini opatchprereqs
    emdpatch.pl ocm opatch.bat opatch.pl README.txt
    [oragold@apps OPatch]$ opatch lsinventory
    _osArch is i386
    /u02/oracle/PROD/db/tech_st/10.2.0/jdk/bin/java -cp ./ocm/lib/emocmutl.jar:/u02/oracle /PROD/db/tech_st/10.2.0/oui/jlib/OraInstaller.jar:/u02/oracle/PROD/db/tech_st/10.2.0/o ui/jlib/xmlparserv2.jar:/u02/oracle/PROD/db/tech_st/10.2.0/oui/jlib/share.jar:/u02/ora cle/PROD/db/tech_st/10.2.0/oui/jlib/srvm.jar:./jlib/opatch.jar:./jlib/opatchutil.jar:. /jlib/opatchprereq.jar:./jlib/opatchactions.jar -DOPatch.ORACLE_HOME=/u02/oracle/PROD/ db/tech_st/10.2.0 -DOPatch.DEBUG=true -DOPatch.RUNNING_DIR=. oracle/opatch/OPatch ls inventory
    Invoking OPatch 10.2.0.4.6
    Oracle Interim Patch Installer version 10.2.0.4.6
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    CmdLineParser::initRuntimeOptions()
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Strin gArguments
    There are 7 fields defined in this class.
    adding option "fp"
    adding option "dp"
    adding option "fr"
    adding option "dr"
    adding option "mp"
    adding option "phbasedir"
    adding option "phbasefile"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$BooleanArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Boole anArguments
    There are 2 fields defined in this class.
    adding option "delay_link"
    adding option "cmd_end"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$IntegerArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Integ erArguments
    There are 2 fields defined in this class.
    adding option "integerarg1"
    adding option "integerarg2"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringtegerArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Strin gtegerArguments
    There are 5 fields defined in this class.
    adding option "stringtegerarg1"
    adding option "stringtegerarg2"
    adding option "ps"
    adding option "mp"
    adding option "xmlinput"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$DoubleArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$Doubl eArguments
    There are 2 fields defined in this class.
    adding option "doublearg1"
    adding option "doublearg2"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$RawStringArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$RawSt ringArguments
    There are 1 fields defined in this class.
    adding option "cmd"
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession"
    initializing String option 0, fp
    initializing String option 1, dp
    initializing String option 2, fr
    initializing String option 3, dr
    initializing String option 4, mp
    initializing String option 5, phbasedir
    initializing String option 6, phbasefile
    done init. String arg.
    initializing Boolean option 0, delay_link
    initializing Boolean option 1, cmd_end
    done init. Boolean arg.
    initializing Integer option 0, integerarg1
    initializing Integer option 1, integerarg2
    done init. Integer arg.
    initializing StringTeger option 0, stringtegerarg1
    initializing StringTeger option 1, stringtegerarg2
    initializing StringTeger option 2, ps
    initializing StringTeger option 3, mp
    initializing StringTeger option 4, xmlinput
    done init. SringTeger arg.
    initializing Double option 0, doublearg1
    initializing Double option 1, doublearg2
    done init. Double arg.
    initializing RawString option 0, cmd
    done init. RawString arg.
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession", don e.
    CmdLineParser::initRuntimeOptions()
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Str ingArguments
    There are 3 fields defined in this class.
    adding option "phbasedir"
    adding option "patchids"
    adding option "phbasefile"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$BooleanArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Boo leanArguments
    There are 2 fields defined in this class.
    adding option "booleanarg1"
    adding option "booleanarg2"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$IntegerArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Int egerArguments
    There are 2 fields defined in this class.
    adding option "integerarg1"
    adding option "integerarg2"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringtegerArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Str ingtegerArguments
    There are 2 fields defined in this class.
    adding option "stringtegerarg1"
    adding option "stringtegerarg2"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$DoubleArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$Dou bleArguments
    There are 2 fields defined in this class.
    adding option "doublearg1"
    adding option "doublearg2"
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession"
    initializing String option 0, phbasedir
    initializing String option 1, patchids
    initializing String option 2, phbasefile
    done init. String arg.
    initializing Boolean option 0, booleanarg1
    initializing Boolean option 1, booleanarg2
    done init. Boolean arg.
    initializing Integer option 0, integerarg1
    initializing Integer option 1, integerarg2
    done init. Integer arg.
    initializing StringTeger option 0, stringtegerarg1
    initializing StringTeger option 1, stringtegerarg2
    done init. SringTeger arg.
    initializing Double option 0, doublearg1
    initializing Double option 1, doublearg2
    done init. Double arg.
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession", d one.
    reqVer For using getEnv() = 10.2.0.4.0
    curVer = 10.2.0.2.0
    Current Ver later than required? :false
    Current Ver equals required? :false
    Checking EMDROOT using OUI's API...
    CmdLineParser.processOPatchProperties() begins
    CmdLineParser.processOPatchProperties() ends
    OUIReplacer::runEnvScript() called
    SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Input Stream
    SystemCall:RuntimeExec(cmds, runDir): Started thread to read Input Stream
    SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Error Stream
    SystemCall:RuntimeExec(cmds, runDir): Started thread to read Error Stream
    SystemCall:RuntimeExec(cmds, runDir): GOING into process.waitFor()
    ReaderThread::run(): Stream ErrorStream about to be read
    ReaderThread::run(): Stream InputStream about to be read
    ReaderThread::run(): Stream InputStream reading completed
    ReaderThread::run(): Stream ErrorStream reading completed
    SystemCall:RuntimeExec(cmds, runDir): process.waitFor() is OVER
    SystemCall:RuntimeExec(cmds, runDir): Error stream thread joined successfully
    SystemCall:RuntimeExec(cmds, runDir): Input stream thread joined successfully
    OUIReplacer::setKeyValue() called
    OPatchSession::main()
    Environment:
    OPatch.ORACLE_HOME=/u02/oracle/PROD/db/tech_st/10.2.0
    oracle.installer.invPtrLoc=/etc/oraInst.loc
    oracle.installer.oui_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui
    oracle.installer.library_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui/lib/linux
    oracle.installer.startup_location=/u02/oracle/PROD/db/tech_st/10.2.0/oui
    OPatch.PLATFORM_ID=
    os.name=Linux
    OPatch.NO_FUSER=
    OPatch.SKIP_VERIFYnull
    oracle.installer.clusterEnabled=false
    TRACING.ENABLED=TRUE
    TRACING.LEVEL=2
    OPatch.DEBUG=true
    OPATCH_VERSION=10.2.0.4.6
    Bundled OPatch Property File=properties
    Minimum OUI version: 10.2
    OPatch.PATH=/u02/oracle/PROD/db/tech_st/10.2.0/perl/bin:/u02/oracle/PROD/db/tech_st /10.2.0/bin:/usr/bin:/usr/sbin:/u02/oracle/PROD/db/tech_st/10.2.0/appsutil/jre/bin:/us r/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/ bin:/usr/X11R6/bin:/home/oragold/bin:.
    Stand-Alone home : false
    Environment:
    OPatch.ORACLE_HOME=/u02/oracle/PROD/db/tech_st/10.2.0
    oracle.installer.invPtrLoc=/etc/oraInst.loc
    oracle.installer.oui_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui
    oracle.installer.library_loc=/u02/oracle/PROD/db/tech_st/10.2.0/oui/lib/linux
    oracle.installer.startup_location=/u02/oracle/PROD/db/tech_st/10.2.0/oui
    OPatch.PLATFORM_ID=
    os.name=Linux
    OPatch.NO_FUSER=
    OPatch.SKIP_VERIFYnull
    oracle.installer.clusterEnabled=false
    TRACING.ENABLED=TRUE
    TRACING.LEVEL=2
    OPatch.DEBUG=true
    OPATCH_VERSION=10.2.0.4.6
    Bundled OPatch Property File=properties
    Minimum OUI version: 10.2
    OPatch.PATH=/u02/oracle/PROD/db/tech_st/10.2.0/perl/bin:/u02/oracle/PROD/db/tech_st /10.2.0/bin:/usr/bin:/usr/sbin:/u02/oracle/PROD/db/tech_st/10.2.0/appsutil/jre/bin:/us r/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/ bin:/usr/X11R6/bin:/home/oragold/bin:.
    Stand-Alone home : false
    Oracle Home : /u02/oracle/PROD/db/tech_st/10.2.0
    Central Inventory : /home/oragold/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 10.2.0.4.6
    OUI version : 10.2.0.2.0
    OUI location : /u02/oracle/PROD/db/tech_st/10.2.0/oui
    Log file location : /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch2009-0 3-30_16-59-59PM.log
    Patch history file: /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch_histo ry.txt
    OUISessionManager::instantiate()
    lockCentralInventory(): OUISessionManager::lockCentralInventory() will retry 0 times w ith 120-second interval to get an Inventory lock.
    OUISessionManager::lockCentralInventory() try round # 1
    OUISessionManager::setupSession()
    OUISessionManager::setupSession() instantiates a OUIInventorySession obj.
    OUISessionManager::setupSession() init. the session
    OUISessionManager::setupSession() sets up READ-ONLY session
    OUISessionManager::setupSession() done
    OUISessionManager::lockCentralInventory() set up session OK
    reqVer = 10.2
    curVer = 10.2.0.2.0
    Current Ver later than required? :true
    Current Ver equals required? :false
    OracleHomeInventory::createInventoryObj()
    OracleHomeInventory::createInventoryObj() gets OUIInventorySession object
    Locker::lock()
    calling lockCentralInventory()
    OUISessionManager::getInventorySession()
    Caller Details:
    Caller Name : OPatch Caller Version : 10.2.0.4.6 Requested Read-only ac cess : true Oracle Home : /u02/oracle/PROD/db/tech_st/10.2.0
    OUISessionManager::register()
    Registering the caller : OPatch
    OracleHomeInventory::createInventoryObj() gets OUIInstallAreaControl object
    OracleHomeInventory::createInventoryObj() gets OUIInstallInventory object
    OracleHomeInventory::createInventoryObj() gets OUIOracleHomeInfo object
    OracleHomeInfo::lock() fails, and there is no retry supported.
    OracleHomeInventory::createInventoryObj() gets a null OUIOracleHomeInfo object
    OracleHomeInventory::createInventoryObj() tries to print a list of Oracle Homes on thi s system
    OracleHomeInventory::createInventoryObj() Your Oracle Home path: "/u02/oracle/PROD/db/ tech_st/10.2.0"mes on this system:
    Home name= OraDb10g_home1, Location= "/u02/oracle/PROD/db/tech_st/10.2.0/db/inventor y/prereqs"
    OracleHomeInventory::createInventoryObj() construction doneInventory::loadAndPrintInventory()
    Retrieving inventory from Oracle Home...
    OracleHomeInventory::load()
    Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
    Possible causes are:
    Oracle Home dir. path does not exist in Central Inventory
    Oracle Home is a symbolic link
    Oracle Home inventory is corrupted
    Locker::release()
    OUISessionManager::unRegister()
    Un-Registering the caller : OPatch
    LsInventory::getInstance() returns
    LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
    Cleaning up the directory : "/u02/oracle/PROD/db/tech_st/10.2.0/.patch_storage/patch_u nzip"...
    OPatch failed with error code 73
    [oragold@apps OPatch]$

Maybe you are looking for

  • How do I initiate a tech support chat with Adobe Muse if I don't have a url?

    How do I initiate a tech chat support with Adobe Muse if I don't have a url?

  • Default attribute in XSD is not working..???

    i have created one BPEL process which will read xml file for which i have created xsd file. In this xsd i have specified some elements Which are the parts of ComplexType with default attribute. But when i pass empty data for thos elements then it is

  • Changing Exactly-Once-in-Order Processing in the Adapter Engine

    During some issues with hanging messages in some communication channels I noticed that messages for other receivers were also on hold. So adapter engine was processing all messages EOIO while Integration Server does that per receiver. I found the [so

  • Changing system preferences automatically

    When I use a mouse with my mac I like "scroll direction: natural" turned off and I like to enable hot corners. I was wondering If I could create an app via Automator or AppleScript that I could click that would set up my computer for either mouse or

  • RSAT - AD slow on Windows 7

    Running Windows 7 (both 64-bit and 32-bit) of the RC (build 7100), I downloaded the Remote Server Admin Tools pack and then went into Add/Remove > Turn Windows Features On/Off and installed the components for Remote Server Admin Tools. This allows yo