Process screen but not display

Hi all,
I want to process a screen logic in a module pool program screen but do not display it.
i.e. 10 --> 50 --> 100 (screen 50 should not be displayed, but just pass the values or process logic)
Please advise. Thanks
Best regards,
FS

If i understood correctly,
variables which you created / used in screen 50 will be available across the program, so in first screen PAI call screen 3rd screen, but pass all the values (for the 2nd screen) before you call the 3rd screen.

Similar Messages

HT4061 my screen is not displaying it is black. The phone rings but nothing displays, this is the same when I receive a text

My screen is not displaying it is black. The phone rings but nothing displays, The same is happening when I receive a text.

Hi there Mrunner,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
-Griff W.

Updateable Report/Pagination - rows found but not displayed

Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination.
I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report.
If I run the Query and the selection criteria results in more than one page in the "search results" and then I go to page 2 or page 3, etc and then peform another search that only results in 1 page of "search results", the actual search results will not display, but the pagination will show the number of rows that should be displaying.
For example, I search on Coroner "John Black", which returns 55 rows. The first 50 are displayed. The next 5 are on page 2. If I then searchon Coroner "Jim Bean", 22 rows are returned (all on page 1). If I then search on "John Black" again, and this time, go to page 2 (to see the final 5 rows in the result set) and then search on "Jim Bean", I won't get any data in the report for Jim Bean, but a message showing that there are 22 rows of data. However, I cannot get that data to show (even if I select NEXT or PREVIOUS for the pages.
Then if I go back and select on "John Black", get the same problem. I basically have to sign out completely in order to get this reset.
Note that the problem occurs if you are on a page greater than that of the result set on the next query. For example, if I am on page 3 of 5 pages and perform another selection that has 3 pages, it is fine. But if the result set only has 2 pages, the form becomes confused.
If the "Layout and Pagination" has a "Pagination Scheme" set to "Row Ranges X to Y of Z (no pagination)" I get an error like "Minimum row requested: 2401, rows found but not displayed: 46".
If I use "Row ranges 1-15 16-30 (with set pagination)" I get "1-46" as a hyperlink, which if I click on, will show me the report.
If I use "Row ranges 1-15 16-30 in select list (with pagination) I have a problem.
If I use "Row Ranges X to Y (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (with pagination) I have problems.
Basically, the one one that seems to work is those that have a hyperlink. Uing NEXT, PREVIOUS or a select list does not seem to work.
Do you know what is causing this problem?

I have the same issue, but cannot resolve it following above suggestions. I have a report page with search criteria and a "Go" button to submit the search. The branch back to the same page has "reset pagination for this page" checked, but still if run a query that returns just one row after having paged forwards, I get no rows displayed and a pagination link "1-1" that when clicked brings up the selected row.
I tried adding a "Reset Pagination" process to run on submit (unconditionally), and it made no difference.
I am using HTMLDB 2.0.

Can I use split screens on and extra monitor I have. I can get mirror image on both screens, but not a split screen. The monitor is 1600 x 900.

Can I use split screens on an extra monitor I have? I can get a mirror image on both screens, but not a split screen. The monitor is 1600 x 900 AOC 20inch monitor. Hope I haven't wasted my money buying this £69 monitor. My 13" Macbook Pro is a little small for my ageing eyes. Thanks

In the display settings on your computer uncheck "mirrored". This will put the displays in "extended" mode. In extended mode you can set the external display to its native resolution as well as drag windows from your computer to the external monitor. I assume that is what you mean when you say "split screen".

F1 and screen painter not display in IE 7.0

F1 and screen painter not display in IE 7.0
my CRM infomation
basis 610 sp 39
kernel 640_ex2
my notebook
window XP sp2
Internet Explorer 7.0
SAP GUI 640 patch 31
SAP GUI 710 patch 7
I try GUI 640 and GUI 710
but sap help and screen painter not display
I aleady apply vbscript http://support.microsoft.com/default.aspx/kb/556050
how can i solve the problem ?
Edited by: Lee Jun Seok on May 21, 2008 1:41 PM
Edited by: Lee Jun Seok on May 21, 2008 1:41 PM

Hi,
Yes, even I had lot of problems with IE7 finally i had to instal windows XP all over again with IE6. Please note that even if you downgrade from IE7 to IE6 without installing windows all over again you will still get problem. the best and only solution is to instal windows from scratch and please ensure that the CD that you have instals IE6 and not IE7 because the CD that I had installed IE7 with XP therefore I had to get another windows XP with IE6 and had to create recovery disk before so that I do not have to run around for drivers later.
Hope this helps
Regards,
Deepak

Virtual Screen but not Screen Sharing

Hello all,
I am wondering if there is a way that I can allow a user to log into my machine with a "virtual desktop" but NOT share my screen. Consider the following scenario: Machine A and B both run OS X Lion. Machine A is logged in as user A. Machine B would like to log into their account remotely through screen sharing. Once they are authenticated, they have the option to "Connect to a virtual display" or "Share the display" The challenge is that I would like to allow them to connect to their virtual display but NOT allow them to share the display while I am using it. Is this possible?
To rephrase the question: is it possible to make remote users request permission to share the screen but not to log into their virtual desktop?
Thanks in advance for any help you can offer!!
Bests,
Phil

Hmm, this is not my experience... is it possible that I have something incorrectly configured then? My setup is as follows:
Machine A:
     - Mac OS X Lion 10.7.4
     - User A: Administrator
     - User B: Regular User
Machine B:
     - Mac OS X Lion 10.7.4
Scenario:
     - User A is logged into Machine A
     - From Machine B, select Finder->Go->Connect to Server and enter vnc://address_of_Machine_A
     - Enter credentials of **User B**
I am presented with two options:
     - "Share the Display - 'User A' is using the display"
     - "Connect to a Virtual Display - See your desktop and files"
When I select the latter, everything goes smoothly with the virtual desktop and both users are able to work simultaneously. However, when I select the first option, User B is able to share User A's screen without entering any additional credentials, which represents a serious privacy issue. Any ideas?
Thanks so much in advance for your help!
Phil

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

IPad will open but not display information entered on a form sent as a PDF.

iPad will open but not display information entered on a PDF file. Same file will open and display all information on my iMac. Anyone had this problem?

I think that you are trying to view a form fields PDF file and you cannot see the content that was filled in on those fields. Form fields will not show in the mail app or in iBooks. Download Adobe Reader for the iPad. It is free and it offers a lot of features for a free app. Save that PDF to Adobe Reader and see if the text in the fields appear.

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

Spouse, Children fields from Outlook - syncing, but not displayed

I discovered something rather curious, and am wondering if anyone has any more information about this.
I use the Children and Spouse fields in my Outlook records. When I sync to iPhone, these fields are not shown. However, if I choose to "share a contact", it sends a vCard, which does include these fields! So the iPhone is clearly copying it over, but not displaying it? What's the point of that? I can understand a reluctance to make some fields uneditable, but storing them without displaying them?
Also of note: the vCard does not include the Anniversary field, even though it does sync this and includes other fields in the vCard like Birthday. That looks like a bug to me. Anyone care to confirm?
Thanks,
Keith

Hi,
It depends what you require...suppose in the multiprovider you want the filed from the ODS then you should select the fiel from the ODS but if you want the filed to get the value from the navigational attribute then you should go fro the navigation attribute in the options.
Navigation attribute will show up in the left if you have made them navigation in the cube as well.
identification gives you an option to map the the multiprovoder fileds with the fields of the underlying infoproviders.....if you go for create recoomendations then it will chose the optimal mapping that is one to one mapping.....A to A etc...but in certain case you want A to map to B such as in sone cases shipt-to-party can take data from sold-to-party....depends upon the requirement.
The options in the left gives you the char which will show up in the query and by selecting the char from the right from different inforproviders you actually defeine which filed from the infoproviders it should take data from.
So just make sure that all the fields in the right which are going to show up in the query should get have the identiication from the different infoproviders and there respective char....a navigation mapped to a navigation....and a direct char to a direct char from the infoprovider.
Hope it explains.
Thanks

I have a new 7th gen iPod, I have up loaded the latest iTunes version, I go to the music tab to sync, I click sync and the ipod starts to sync, but it does not sync all the music. It indicates all the songs on the screen, but not on the ipod

I have a new 7th gen iPod, I have up loaded the latest iTunes version, I go to the music tab to sync, I click sync and the ipod starts to sync, but it does not sync all the music. It indicates all the songs on the screen, but not on the ipod

I do not have the screen shown with the
Pull down the “Store” menu and choose “Deauthorize This Computer”
3. Now go back to the Store menu and choose “Authorize This Computer”
options.

My iPad screen is not displaying apps or app screens.

Hello,
My iPad screen is not displaying any apps at all. There are no app screens - it isn't that I am not swiping left. My wallpaper is still showing, and the only actions I can perform is pulling down the notification screen and pulling up the convenience bar. It doesn't lock so I can't restart it from iTunes. What is happening?
I have an iPad with iOS 8.1.1
Thanks

Try a reset. Press and hold both the Home and power buttons until the Apple logo appears. Release both fingers. Wait until your iPad starts on it's own.
If the apps are still missing tell Siri to open settings. Then go to general> reset> reset home screen layout.
Also you can ask Siri to open a app to make sure they are still there.

A way to have notifications appear on lock screen but not activate the screen each time I receive one?

Using an iPhone 4 with iOS 5.0.1 I like how I can have my notifications appear on my lock screen (usually for a new email) but dislike how every time I receive a notification, my iPhone screen lights up with the notification. Is there a way to continue receiving notifications on my lock screen but not have the screen illuminate every time I receive one? It's a constant distraction when I am at work, and I like to keep my phone turned face-up on my desk in case I get a call.

No

HT4061 the first 4 digit code is forgotten and the screen is not displayed

I have got iphone 5c and unfortunately my daughter changed passcode , the first 4 digit code. And the screen is not displayed.So how can i get help?

http://support.apple.com/kb/HT1212

TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Process screen but not display

Similar Messages

Maybe you are looking for