Process SFCs
Hi Expe'rts,
I am new to SAP ME. I am trying to build a demo project in ME. I have followed the instructions as per the ME help and training manual.
configurations done:
I have created master data (material, BOM, routing, work centre, resource) and sent it to ME.
Created production order, sent to ME - POIT
MIGO - GI done ( 261)
received the inventory in ME using inventory ID
released the shop order in shop order release - SFCs generated as per config in next number maintenance.
POD configured - standard POD
Issue that i am facing is
1) when i am processing the SFCs in POD, i see always the SFC status in In Queue though i have selected start and complete button and after entering some assembly data. Why the SFC status does not change to done or completed and not moving automatically to the next operation as mentioned in routing. Also sometimes, when i select the complete button, i am getting an error message 12001 (VALID_FROM is missing). what is the reason for this error
2) when i am trying to log an NC in a POD, in the NC client page, after i select the ADD button, i get VALID_FROM is missing error.
3) I am not able to see any operation level confirmation and inventory reduction getting updated in ERP though i have done the necessary changes in colloborative directive maintenance in transport parameters. Should we have to mention anything in input parameters thatwe configure in transport parameters url.
4) Also i am trying to set up some data to be collected during assembly and the necessary configs done in data collection maintenance, certification maintenance, user cert assignment and material maintenance. but i am not able to see the datas in POD.
Kindly clarify the above doubts.
Thanks
S.Mahalakshmi
Hello Mahalakshmi,
1) SFCs in the Task List (Start has not been performed) are in status "In Queue" or "New". After Start, the SFCs will appear in the Active Work List and the status will "Active". After Complete, the SFCs change the Status to either "In Queue" at the next operation or to "Done" if the last operation has been completed. There are few more SFC states, but that is the general idea.
2) No idea.
3) If every thing is setup correctly, ME will send the yield confirmation after Complete at the operation (to the corresponding ERP reporting step). ME will report only inventory reduction for GI with movement 311, not for 261.
4) You have to configure Data Type (Maintenance / Product Configuration / Data Type Maintenance) for Category Assembly. Then you have to add the Assembly Data Type either to the BOM component or to the material definition (tab Build / Data to Collect on Assembly).
I hope that helps.
Best Regards,
Miguel
Similar Messages
-
NTDLL.DLL issue with HRBLOCK.EXE application
I am on Windows 7 64-bit and everything works fine. I recently downloaded the 2014 H&R Block Tax program on my new computer and ran the installation. Installed fine. Go to use it and it starts up but fails with a reference to NTDLL.DLL
and H&R Block is stating it is not their problem but a Microsoft issue. Can find any fixes and this is stressing me out.
The information from the event log is listed below. Any assistance would be appreciated. Note I have processed SFC /scannow with no issues.
Log Name: Application
Source: Application Error
Date: 1/18/2015 12:16:16 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: B21NL12.corp.pcconstruction.com
Description:
Faulting application name: HRBlock2014.exe, version: 2014.2.0.5501, time stamp: 0x549461f3
Faulting module name: ntdll.dll, version: 6.1.7601.22436, time stamp: 0x521eaa80
Exception code: 0xc015000f
Fault offset: 0x000845f9
Faulting process id: 0xbc0
Faulting application start time: 0x01d0334276d057a5
Faulting application path: C:\Program Files (x86)\HRBlock2014\Program\HRBlock2014.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: b5a8cfe7-9f35-11e4-88cf-f8165496897a
Event Xml:
<Event xmlns=>
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-18T17:16:16.000000000Z" />
<EventRecordID>27735</EventRecordID>
<Channel>Application</Channel>
<Computer>B21NL12.corp.pcconstruction.com</Computer>
<Security />
</System>
<EventData>
<Data>HRBlock2014.exe</Data>
<Data>2014.2.0.5501</Data>
<Data>549461f3</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.22436</Data>
<Data>521eaa80</Data>
<Data>c015000f</Data>
<Data>000845f9</Data>
<Data>bc0</Data>
<Data>01d0334276d057a5</Data>
<Data>C:\Program Files (x86)\HRBlock2014\Program\HRBlock2014.exe</Data>
<Data>C:\Windows\SysWOW64\ntdll.dll</Data>
<Data>b5a8cfe7-9f35-11e4-88cf-f8165496897a</Data>
</EventData>
</Event>Hi Randy ,
Ntdll.dll file is a file created by Microsoft that has a description of "NT Layer DLL" and the file contains NT kernel functions.
Considering you have performed a system health scan and there is no problem found .There is still a possibility that the installation of this program has suffered a corruption though there is no error found during installation .
Have you tried to uninstall and reinstall it to have a check ? Please ensure you have got the latest version of this program .
Meanwhile I found a similar symptom and the OP has resolved it ,it may be helpful to you .
2014 HR Block Premium Fed+State - Program crashed(Pay attention to steveu1`s answer )
http://community.hrblock.com/t5/DIY-Products/2014-HR-Block-Premium-Fed-State-Program-crashed/td-p/57634#.VL4ANHkfrwo
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards -
Printing a label listing all SFC-Nr. of a process lot
Hi
I would like to print out a document or Label out of SAP ME, listing all SFC of a process lot.
When printing out the label on binding method SFC, there is 1label/SFC created
When printing out the label on binding method PROCESS_LOT, only the first SFC is listed, but not all SFC of the Processlot.
Is the indexing (which is used for example for SFC Data) the right instrument?
e.g. DATA_BY_PROCESS_LOT.SFC_DATA.SFC_HEADER_DATA.SFC_NUMBER0 (NUMBER0 to NUMBER25)?
I'm glad for any help.
BR
YvonneHi Stuart
Thanks for your prompt answer
We use ME 6.0
And I would Need a list of all 25 SFC-Nr. in the process lot.
but unfortunately, I just receive one SFC-Nr. out of the 25SFC, which are in the ProcessLot.
In the how-to-guide, it is explained, that for SFC-Data, if there are multiple customer data, the SFC_CUSTOM_DATA.ATTRIBUTE Field Needs to be indexed.
What I was wandering, is whether for the listing of all the SFC-Nr., this would be the same indexing, like I wrote in my first question.
KR
Yvonne -
Booking NC-Codes on single SFC in POD Layout for Process lots
Hi
We work with MES 6.0 and work with Process Lots with different amount of SFC in one Process Lot.
We would like to work with the POD-Layout showing the Process Lots in work-list.
But on the other side, we need to book NC-Codes on single SFC, but we don't use Standalone-NCcode-Booking.
Now, what we would like to do, is to Change the jop from the actual POD-Layout to an other one,showing SFC instead of PL, to be able to book NC-Codes. I can do this with an activity, but Operation and Resource stay empty on POD.
Is there any possiblity to place placeholder in the Activity-Link "com/sap/me/wpmf/Client/template.jsf?WORKSTATION="BLABLA"&OPERATION=value"
Thanks in advance for an answer
Kind regards
Y. ZurbuchenHi Konstantin
Because I have different operations and resources, and therefore, I'd have lots of different activities and different POD's as I link the "subPOD" at the Operation.
Regards
Yvonne -
HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again. -
How to perform Data Collection on single SFC with QTY = 1 with material lot size 1?
Dear experts,
We are working with SFC qty>1 on a relaxed routing. At a given operation we want to collect the data on single quantity; i.e. SFC qty on that operation, where the collection will happen, will be 1.The corresponding material lot size is for ex 10. The operator must be able to collect data on SFC with qty=1 multiple times until the quantities will be consumed. He must be also able to collect other values on the remaining quantities on the same operation with the same DC group or other DC groups. How many times the data must be collected is dependent on the shop order build quantity. The data may be collected several time but not more than the build qty. In other words some specific data will be collected on a qty of a product while others will be collected against remaining quantity. The data collection must be also done in a serialized manner.
Here's what we have set up so far:
1) 3 DC groups, each DC group has 3 data fields.
2) Each data field has the following restrictions: Required Data Entries = 0 and Optional Data Entries = 1
3) All DC groups are attached on the same combination of operation\material\routing
4) we are using relaxed routing
Process description:
The operator must be able to collect any data field on single product. For that he will enter the operation where the data collect are attached, he will enter the SFC with qty=1 then he will run the data collection after selecting the appropriate DC Group and entering the needed information. The operator will complete the SFC with qty=1.
The operator will pick the next product, select the same SFC and enter qty 1 and collect other value against this product.
Problem is:
Once the first collection is done on a given SFC with entered qty=1, the system is not allowing the operator to do further collects on the same SFC with qty=1 or any other quantity. He cannot select any DC group from the DC group list. We tried also with the table selection menu on the DC Group list but nothing can be selected.
So we tried to play around with the DC group definitions as follows:
A) we set Required Data Entries = 0 and Optional Data Entries = 10. Still the operator was not able to select any DC group after collecting data the first time. We tried to reopen the pod and list again. But we get the same blocking behavior.
B) we set Required Data Entries = 10 and Optional Data Entries = 1. The operator was able to select the DC group after collecting data the first time. BUT operator must enter the data fields 10 times on one SFC quantity, which is not what we want. Besides again he cannot collect other information on remaining quantities on the same operation.
C) There's an option to serialize the SFC before reaching the operation where the collection is happening, then merging ofter complete. Automation is needed here; hence customization. We are highly avoiding customization now, since we expect the data collect to work well on single quantities even when the main SFC has qty>1
Questions:
1) Are we missing any kind of further configuration\setup?
2) Or the current system design does not allow collecting data on single quantities of an SFC which main quantity is greater than 1?
3) Looking at this link Approaches to Collection of Data - SAP Manufacturing Execution (SAP ME) - SAP Library, there's nothing mentioned about same SFC number with multiple quantities!!!
We are using SAP ME 15.0.3.0.
Thanks in advance for your help
AliAli
to collect data for the same SFC multiple times, your system rule "Allow Multiple Data Collection" needs to be set to true for the site.
Stuart -
Win 8.1 sfc /scannow returns Windows Resource Protection could not perform the requested operation.
I am running Windows 8.1 Pro.
I have been experiencing problems that lead me to believe the my component store is corrupted.
When I run sfc /scannow sfc immediately comes back with "Windows Resource Protection could not perform the required operation.
Here are the entries in the CBS file
TI: --- Initializing Trusted Installer ---
2014-01-21 10:45:59, Info CBS TI: Last boot time: 2014-01-21 10:28:05.492
2014-01-21 10:45:59, Info CBS Starting TrustedInstaller initialization.
2014-01-21 10:45:59, Info CBS Ending TrustedInstaller initialization.
2014-01-21 10:45:59, Info CBS Starting the TrustedInstaller main loop.
2014-01-21 10:45:59, Info CBS TrustedInstaller service starts successfully.
2014-01-21 10:45:59, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2014-01-21 10:45:59, Info CBS Startup processing thread terminated normally
2014-01-21 10:45:59, Info CBS Starting TiWorker initialization.
2014-01-21 10:45:59, Info CBS Ending TiWorker initialization.
2014-01-21 10:45:59, Info CBS Starting the TiWorker main loop.
2014-01-21 10:45:59, Info CBS TiWorker starts successfully.
2014-01-21 10:45:59, Info CBS TiWorker: Client requests SFP repair object.
2014-01-21 10:45:59, Info CBS Universal Time is: 2014-01-21 16:45:59.014
2014-01-21 10:45:59, Info CBS Open of SC_BOOT_SERVICING_DONE event failed 2
2014-01-21 10:45:59, Info CBS Loaded Servicing Stack v6.3.9600.16470 with Core: C:\WINDOWS\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16470_none_fa2491fd9b3cfcb2\cbscore.dll
2014-01-21 10:45:59, Info CSI
00000001@2014/1/21:16:45:59.016 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa55266bda @0x7ffa55269a06 @0x7ff74300d25f @0x7ff74300dc17 @0x7ffa800d2385)
2014-01-21 10:45:59, Info CBS SQM: Initializing online with Windows opt-in: False
2014-01-21 10:45:59, Info CBS SQM: Cleaning up report files older than 10 days.
2014-01-21 10:45:59, Info CBS SQM: Requesting upload of all unsent reports.
2014-01-21 10:45:59, Info CBS SQM: Failed to start upload with file pattern: C:\WINDOWS\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005
- E_FAIL]
2014-01-21 10:45:59, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
2014-01-21 10:45:59, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\WINDOWS\servicing\sqm\*_all.sqm, flags: 0x6
2014-01-21 10:45:59, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
2014-01-21 10:45:59, Info CBS NonStart: Set pending store consistency check.
2014-01-21 10:45:59, Info CSI
00000002@2014/1/21:16:45:59.020 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa652e7fc0 @0x7ffa652e80f2 @0x7ff74300c9a5 @0x7ff74300dc2e @0x7ffa800d2385)
2014-01-21 10:45:59, Info CSI 00000003 No store version format found; DLL store format 0.0.0.6
2014-01-21 10:45:59, Error CSI
00000004@2014/1/21:16:45:59.027 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
(null)
[gle=0x80004005]
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
2014-01-21 10:45:59, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info CBS Failed to get CSI system store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info CBS CSI store consistency check fails. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info CBS Failed to load component store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info CSI 00000005 No store version format found; DLL store format 0.0.0.6
2014-01-21 10:45:59, Error CSI
00000006@2014/1/21:16:45:59.051 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
(null)
[gle=0x80004005]
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
2014-01-21 10:45:59, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:47:59, Info CBS Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
2014-01-21 10:47:59, Info CBS TiWorker signaled for shutdown, going to exit.
2014-01-21 10:47:59, Info CBS Ending the TiWorker main loop.
2014-01-21 10:47:59, Info CBS Ending the TrustedInstaller main loop.
2014-01-21 10:47:59, Info CBS Starting TiWorker finalization.
2014-01-21 10:47:59, Info CBS Starting TrustedInstaller finalization.
2014-01-21 10:47:59, Info CBS Ending TrustedInstaller finalization.
2014-01-21 10:47:59, Info CBS Ending TiWorker finalization.
Is there a way to rebuild the component store?
Thanks,
GlenHey Glen,
This log shows the exact same error that is mentioned in the comments of
this blog post, and the response is:
joscon [Microsoft]
joscon [Microsoft]
Thanks. Unfortunately, this isn't good news. The CanonicalData key is missing.
2013-08-05 11:08:32, Error CSI 00000004@2013/8/5:09:08:32.471 (F) base\wcp\componentstore\storelayout.cpp(3617): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey
expression: (null)
[gle=0x80004005]
Unfortunately, its a small, but unrecreatable subset of data. If this is missing, servicing is broken on the machine and the system will need to be restored from backup or PBR.
So you will need to try a refresh or a re-install of Windows, unfortunately.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet -
H8-1520t: sfc /scannow reported file corruption in Windows 8.1
My computer (h8-1520t) computer had had file corruption error reported by sfc /scannow.
The corruption was rather common corruption as discovered elsewhere on the internet. The corruption pertained to prncacla.inf and it was repaired only by using DISM.exe /Online /Cleanup-image /Restorehealth. The corruption occured while the computer was doing automatic maintenance which locked up my system. After forcing a shutdown and rebooting, I immediately ran sfc /scannow and that's when the corruption was first detected.
Now sfc /scannow finds no corruption and automatic maintence runs to completion.
Since this is a rather common corruption error and there's no explanation as to what causes the problem, should I send my computer, which it's still under warranty, back to HP ---or--- did I corrected the corruption properly ? ? ?
On additional question: What on earth causes that common corruption to occur anyway.
Also: UEFI diagnostics extensively run and the extensive testing revealed no problems with system board, hard drive, memory, processor (i7-3770), graphics card memory (Radeon HD 8570).
If I should be concerned about my computer being a dud and lemon, I'd like to know... Or, did I fix the corruption correctly?
Thanks,
MarkHi Mark,
You may want to review this article.
If you are not comfortable with the Windows repair process then you can use the external HP recovery media to reload you PC back to a day one factory fresh condition. Backup your data before doing so.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Hi,
After a sudden power failure, I guess vista file system is corrupt. I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself, when I start IE, it closes automatically ,
Norton antivirus does not start itself. and so on.
After Bing search, I went to safe mode and executed sfc /scannow and it reported error as below.
"Windows resource protection found corrupt files but was unable to fix some of them"
Unfortunately I am unable to upload log file, so I am pasting CBS.log content here.... Please advice.
Some parts of logs are removed due to limit of 60000 characters.
Please advice.
Regards
2014-07-07 14:55:57, Info CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
2014-07-07 14:55:58, Info CSI
00000001@2014/7/7:09:25:58.062 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x7147854e @0x714563a1 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info CSI
00000002@2014/7/7:09:25:58.156 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x714ae7b6 @0x71490f93 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info CSI
00000003@2014/7/7:09:25:58.187 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x73981a0d @0x73981794 @0x34360b @0x342be3 @0x3417cb)
2014-07-07 14:55:58, Info CBS NonStart: Checking to ensure startup processing was not required.
2014-07-07 14:55:58, Info CBS NonStart: Windows is in Safe Mode.
2014-07-07 14:55:58, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL,
phase = 0, pdwDisposition = @0x2dfe70
2014-07-07 14:55:58, Info CBS NonStart: Success, startup processing not required as expected.
2014-07-07 14:55:58, Info CSI 00000005 CSI Store 4780952 (0x0048f398) initialized
2014-07-07 14:56:03, Info CSI 00000006 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:03, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:10, Info CSI 00000008 Repair results created:
POQ 0 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\ca20037dc599cf01650000007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa070f7dc599cf01660000007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
2: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aca137dc599cf01670000007806a403.program_files_common_files_d7a65bb2f0e854e7.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_d7a65bb2f0e854e7.cdf-ms"
3: Move File: Source = [l:278{139}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a8d187dc599cf01680000007806a403.program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms", Destination = [l:190{95}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms"
4: Move File: Source = [l:286{143}]"\SystemRoot\WinSxS\Temp\PendingRenames\4ab11f7dc599cf01690000007806a403.program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms", Destination = [l:198{99}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms"
5: Move File: Source = [l:292{146}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa12227dc599cf016a0000007806a403.program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms", Destination = [l:204{102}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms"
6: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa28487dc599cf016b0000007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
7: Move File: Source = [l:208{104}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aeb4c7dc599cf016c0000007806a403.$$_ehome_40103e2da1d
2014-07-07 14:56:10, Info CSI 121de.cdf-ms", Destination = [l:120{60}]"\SystemRoot\WinSxS\FileMaps\$$_ehome_40103e2da1d121de.cdf-ms"
POQ 0 ends.
2014-07-07 14:56:10, Info CSI 00000009 [SR] Verify complete
2014-07-07 14:56:11, Info CSI 0000000a [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:11, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:19, Info CSI 0000000c Repair results created:
POQ 1 starts:
POQ 42 ends.
2014-07-07 14:58:29, Info CSI 000000b1 [SR] Verify complete
2014-07-07 14:58:30, Info CSI 000000b2 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:30, Info CSI 000000b3 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:38, Info CSI 000000b4 Repair results created:
POQ 43 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf01391100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf013a1100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
2: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\cadfdcd4c599cf013b1100007806a403.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
3: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a41dfd4c599cf013c1100007806a403.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea0ef7d4c599cf013d1100007806a403.$$_apppatch_1143992cbbbebcab.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
5: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea241dd5c599cf013e1100007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
6: Create Directory: Directory = [l:48{24}]"\??\C:\Program Files\MSN", Attributes = 00000080
POQ 43 ends.
2014-07-07 14:58:38, Info CSI 000000b5 [SR] Verify complete
2014-07-07 14:58:38, Info CSI 000000b6 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:38, Info CSI 000000b7 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:43, Info CSI 000000b8 Repair results created:
POQ 44 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\eac6f0d7c599cf01a31100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa89f5d7c599cf01a41100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
2: Move File: Source = [l:216{108}]"\SystemRoot\WinSxS\Temp\PendingRenames\6a4cfad7c599cf01a51100007806a403.$$_resources_fbee56ab048ab239.cdf-ms", Destination = [l:128{64}]"\SystemRoot\WinSxS\FileMaps\$$_resources_fbee56ab048ab239.cdf-ms"
3: Move File: Source = [l:230{115}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a61100007806a403.$$_resources_themes_4d0d4910e83c2273.cdf-ms", Destination = [l:142{71}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_4d0d4910e83c2273.cdf-ms"
4: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a71100007806a403.$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms"
5: Move File: Source = [l:252{126}]"\SystemRoot\WinSxS\Temp\PendingRenames\8a7001d8c599cf01a81100007806a403.$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms", Destination = [l:164{82}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms"
6: Move File: Source = [l:276{138}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa9408d8c599cf01a91100007806a403.$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms", Destination = [l:188{94}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms"
7: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\cab80fd8c599cf01aa1100007806a403.$$_schcache_f995a5d4decb8cc0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf
2014-07-07 14:58:43, Info CSI -ms"
8: Move File: Source = [l:212{106}]"\SystemRoot\WinSxS\Temp\PendingRenames\cad948d8c599cf01ab1100007806a403.$$_msagent_be90584645cb9b95.cdf-ms", Destination = [l:124{62}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_be90584645cb9b95.cdf-ms"
9: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a7578d8c599cf01ac1100007806a403.$$_system32_21f9a9c4a2f8b514.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
10: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\cafa81d8c599cf01ad1100007806a403.$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
11: Move File: Source = [l:224{112}]"\SystemRoot\WinSxS\Temp\PendingRenames\aae18dd8c599cf01ae1100007806a403.$$_msagent_chars_9a5bcb5da392f588.cdf-ms", Destination = [l:136{68}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_chars_9a5bcb5da392f588.cdf-ms"
POQ 107 ends.
2014-07-07 15:08:01, Info CSI 00000213 [SR] Repair complete
2014-07-07 15:08:01, Info CSI 00000214 [SR] Committing transaction
2014-07-07 15:08:01, Info CSI 00000215 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-07 15:08:01, Info CSI 00000216 Created NT transaction (seq 1) result 0x00000000, handle @0x4cc
2014-07-07 15:08:01, Info CSI
00000217@2014/7/7:09:38:01.060 CSI perf trace:
CSIPERF:TXCOMMIT;5
2014-07-07 15:08:01, Info CSI 00000218 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repaired
2014-07-07 15:15:58, Info CBS Scavenge: Package store indicates there is no component to scavenge, skipping.
Hi,
First, I would suggest you using last known good configuration:
Using Last Known Good Configuration
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-vista
if this cannot bring your Windows Vista back to good state, I suggest you perform in-place upgrade to fix the corrupted files:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support -
Process after restore - do you really need to download years of upgrades or ????
Satellite A205-S5804 Vista SP2 I have read through hundreds of questions but have been unable to find answer. May have missed it. I ran MS add/remove software to remove some HP software. Process aborted & now all my startup programs are gone. Some of my program setups are also gone. Applied the MS process to restore to default & have some programs now. All my application programs are installed but no startup icons for execution. Ran restore to point before removing HP software but it failed "system restore could not be completed". Ran sfc scannow but no help. Ran chkdsk /r but no help. Startup programs still missing. Appears that I will have to use the still shrinkwrapped recovery CDs to restore (backup CDs lost). I have backed up entire system plus copied downloads, documents, all user data, favorites, exported MS MAil messages & contacts, & softwaredistrubition files to external drive. SoftwareDist is where all the updates are stored that have been updated over the last 2+ years. Question: Do I have to go through all the Windows updates (download) after the restore or can I just run them from the softwareDistribution folder. I seems like a pity to go thought all the years of upgrades. Will the system do all the updates properly if I have to use the normal windows process to upgrade after the restore. I have never had to restores since the 80's on original PCs. Just exactly is the process to get back my PC like it was after a restore to factory setup
Regards,
DennisSatellite A205-S5804
Do I have to go through all the Windows updates (download) after the restore ..
Dennis, you must install Vista's Service Pack 1 and then Service Pack 2. Most of the updates will be installed by those.
Windows Vista Service Pack 1 (SP1)
Information about Service Pack 2 for Windows Vista and for Windows Server 2008
Then use Windows Update to install the newer ones.
Sorry it's the hard way.
-Jerry -
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255
Hello All
We have a server 2008 R2 HyperV server and during the last few months it started to reboot randomly.
Initially we thought its related to the issue fixed by the following hotfix so we applied it but even with the hotfix it still keeps rebooting.
http://support.microsoft.com/kb/2732595
Unlike what's mentioned in the hotfix , the faulting module is not "ntdll.dll" but "msvcrt.dll".Also came up with the following indication the reboots could be related to KB2871997 but that update is not installed
on this system.
Following are the events from system log.
Log Name: System
Source: LsaSrv
Date: 2/9/2015 11:58:12 PM
Event ID: 5000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HV2008-Host
Description:
The security package Kerberos generated an exception. The exception information is the data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
<EventID>5000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-10T04:58:12.415529200Z" />
<EventRecordID>8091130</EventRecordID>
<Correlation />
<Execution ProcessID="736" ThreadID="5888" />
<Channel>System</Channel>
<Computer>HV2008-Host</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Package">Kerberos</Data>
<Binary>050000C00000000000000000000000001111F6FEFE070000020000000000000000000000000000008EEB1802000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Log Name: System
Source: USER32
Date: 2/9/2015 11:58:24 PM
Event ID: 1074
Task Category: None
Level: Information
Keywords: Classic
User: SYSTEM
Computer: HV2008-Host
Description:
The process wininit.exe has initiated the restart of computer HV2008-HOST on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="USER32" />
<EventID Qualifiers="32768">1074</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-10T04:58:24.000000000Z" />
<EventRecordID>8091132</EventRecordID>
<Channel>System</Channel>
<Computer>HV2008-Host</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>wininit.exe</Data>
<Data>HV2008-HOST</Data>
<Data>No title for this reason could be found</Data>
<Data>0x50006</Data>
<Data>restart</Data>
<Data>The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.</Data>
<Data>
</Data>
<Binary>06000500000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Following are the events from Application logs.
Log Name: Application
Source: Application Error
Date: 2/9/2015 11:58:14 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: HV2008-Host
Description:
Faulting application name: lsass.exe, version: 6.1.7601.22653, time stamp: 0x534893ed
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x0000000000001111
Faulting process id: 0x2e0
Faulting application start time: 0x01d03c91dbe5854f
Faulting application path: C:\Windows\system32\lsass.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-10T04:58:14.000000000Z" />
<EventRecordID>267648</EventRecordID>
<Channel>Application</Channel>
<Computer>HV2008-Host</Computer>
<Security />
</System>
<EventData>
<Data>lsass.exe</Data>
<Data>6.1.7601.22653</Data>
<Data>534893ed</Data>
<Data>msvcrt.dll</Data>
<Data>7.0.7601.17744</Data>
<Data>4eeb033f</Data>
<Data>c0000005</Data>
<Data>0000000000001111</Data>
<Data>2e0</Data>
<Data>01d03c91dbe5854f</Data>
<Data>C:\Windows\system32\lsass.exe</Data>
<Data>C:\Windows\system32\msvcrt.dll</Data>
<Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 2/9/2015 11:58:23 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-10T04:58:23.000000000Z" />
<EventRecordID>267650</EventRecordID>
<Channel>Application</Channel>
<Computer>HV2008-Host</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>lsass.exe</Data>
<Data>6.1.7601.22653</Data>
<Data>534893ed</Data>
<Data>msvcrt.dll</Data>
<Data>7.0.7601.17744</Data>
<Data>4eeb033f</Data>
<Data>c0000005</Data>
<Data>0000000000001111</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
<Data>
</Data>
<Data>0</Data>
<Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
<Data>0</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 2/9/2015 11:58:22 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 4
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-10T04:58:22.000000000Z" />
<EventRecordID>267649</EventRecordID>
<Channel>Application</Channel>
<Computer>HV2008-Host</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>lsass.exe</Data>
<Data>6.1.7601.22653</Data>
<Data>534893ed</Data>
<Data>msvcrt.dll</Data>
<Data>7.0.7601.17744</Data>
<Data>4eeb033f</Data>
<Data>c0000005</Data>
<Data>0000000000001111</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
<Data>
</Data>
<Data>0</Data>
<Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
<Data>4</Data>
</EventData>
</Event>
Would really appreciate if someone can point us to the correct direction on how to get this issue sorted.
Regards,
DhanushkaHi Sir,
Please try the following items:
1. if ther is anti-virus installed , please uninstall it temporarily
2. run " sfc /scannow "
3. keep windows up-to-date
4. if you updated some hardware driver please roll it back
5. if the issue persists , please use windows installation media to perform inplace-upgrade for the system
Also please refer to reinstall C++ runtime within the similar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/bf69eeff-24c4-499f-b280-b6a3098f4f9f/problem-with-msvcrtdll-version-70760117744?forum=w7itprogeneral
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
BDT custom SFCs not shown on screen
We have to set up some custom SFC categories, and I have to create new screens for them so that they are included in claims. According to OSS Note 704333, the following needs to be done (this is copied directly from the note):
Enter a new category in the IMG under Claims Management -> Structuring Business Processes -> Structured Facts Capture -> Enhance Facts Capture Categories. Also refer to the documentation for this IMGnode.
Create a BDT view. You have to enter different subscreens and function modules in the view, depending on whether it is a quick question sequence or standard question sequence (dialog box). As examples, you can use view ICLQ08 for the quick question sequence and ICLQ03 for the standard question sequence.
With the standard question sequence you must also assign field groups 50 and 51 to the view.
For a standard question sequence, use screen 300 in SAPLICL_SFC_BDT, for a quick question sequence, on the other hand, use 112 (depending on the desired size).
For the PBO and PAI modules, you have to enter the function modules mentioned for the above views (depending on the category). The PBC module has to be created specifically for your view; the modules entered with the above views can also serve as a template.
In the PBC you have to fill the following fields of structure ICL_SFC:
FACTSCAT: Your new SFC category
DSTSUBCLAIM: Subclaim to which the SFC refers
SUBOBJECT: The key by which the object is clearing identified in the claim, e.g. the number of the damaged object
XREADONLY: To be set in the display mode of the claim
You can fill PBTEXT and VIEW using function module ICL_TBSFC004_GET.
You use function module ICL_SFC_ACTINST_SET to set the values in function group ICL_SFC_BDT. Add the newly created BDT view to the provided screen sequence.
Create a question sequence for your SFC category and assign this to the corresponding internal claim type.
I followed the instructions and created new views for the new SFC's (this is so that I could use my own Function modules in the PBC events. This is the only thing I changed - the PAI and PBO both call standard SAP modules, and all the other stuff, i.e. application etc. I left the same as the standard). I assigned the views to sections --> screens etc. The screen where the SFC should appear, is there but it is blank, i.e. it doesn't show any buttons or anything.
I also hard-coded break points into my PBC modules but these never seem to be called either, because the processing never gets there, evidently. So this leads me to believe that I've missed something out in setting up the funtionality. Any ideas? Also, do I need to do anything in the BDT events to populate the new SFC's or does the system do this automatically?
Thanks for your help.No I don't think you want ECSFO001 for ISUSDPART either. I recall implementing that last year to disable the create/change functions in the "Search and Display" component as they bypassed BDT field-group security.
I'm not sure where in CIC you want your custom field to display. Do you want to show it in the navigation area?
As for search results (ISUFINDER), I seem to recall that it was possible to configure the finder to show additional attributes of the BOR object type, such as ISUPARTNER. But I might be having myself on there as it's only a vague memory.
As standard, the finder displays columns for the the key and default attribute of the search object, in this case BOR object type ISUPARTNER. The default attribute in this case is name shorttext (can't recall what the attribute is called right now). You could implement a sub-type and override the implementation of this default attribute so that you also display an icon of some sort in the name text if your custom field is set.
Cheers,
Scott -
Batch process crashes in 32 bit CS5 but works fine in 64 bit.
Deleted preferences file, ran SFC and CHKDSK. Performed all computer maintenance.
Widows 7 64 bit Quad core Q9300 processor 6 gigs of ram. Ran MEMTest and reinstalled Photoshop over top of old installation.
Really don't want to start from scratch.
Please help.
RichTried setting everything the same. I put RAM usage at 70% for both versions
but of course the actual amount is different for 32 and 64 bit versions. No
luck.
This started at about the same time as the 12.0.4 update. Read some people
had other types of problems with this update. I would just use the 64 bit
version but some of my plugins only work with 32 bit version.
Thanks -
Hy,
I have upgraded my S540 to Windows 8.1. I installed all drivers and updates and have now sometimes bluescreens with the message "critical process died". I know this is not much information but I have no idea how to examne or solve the problem.Hola pasoprohibido que tal,
Que estuviste realizando ante del mensaje?, puede ser relacionado al Windows update, en teoría el mensaje guarda relación con que algún proceso para que arranque Windows no este andando como debe.
Pues esta medio complicado la situación si te dice que la unidad que contiene Windows esta bloqueada, puedes intentar algo con la unidad de la memoria USB que comentas puedes ingresar al CMD y escribir sfc /scannow
Otra opción radical es una nueva instalación, digo radical porque implicaria eliminar todo lo que tengas en la unidad que contenia a Windows (unidad C del disco duro por lo general), no comentas que modelo tienes, podría asumir que tenias Windows 8 pre-instalado pero no encuentro por ahora con información oficial sobre alguna descarga de una imagen para una posible instalación de cero (instalación limpia), lo que si te podría servir es esta información, funcional si tenias un ordenador con Windows 8 pre-instalado.
Un saludo.
@Antony_Vamu
Comunidad en Español English Community Deutsche Community РусскоязычноеСообщество
Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!! -
How to complete NC process by API
I have log the nc code to our SFC using NCProductionService,and can see it in NC Report,but I can not complete the process of LOG NC as NC500.How to complete it by API?
ThanksI log the nc to my SFC,but how to complete the nc process by API?
Wait for you help,thanks
Maybe you are looking for
-
How to set up remote access to my old Powerbook?
Hello. I would like to access some files from my old Powerbook from my new Macbook, as I always forget files I wind up needing later (I just recently bought the Macbook) , and don;t want to load everythign which was on my Powerbbok onto my new comput
-
Photoshop CC Sharpen - Camera Shake tool. Why can't I access this tool.
PS CC Sharpen - Camera Shake tool, has anybody had problems accessing this tool and has an answer to overcome the problem.
-
How do you install a CD of LR 5 in MS 8?
How do you install a CD of LR 5 in MS 8?
-
Calling function from PHP fails..!
Hi everybody. I'm developing a web application using oracle Portal and have made a 'dynamic' page from the Portal. In this page I have a form which execute a php script. In the php script I want to get the logged in userid. So I try to execute the fo
-
Vmware tools on Cisco Prime Infrastructure
Hi, Is there a way to install vMware tools on Cisco Prime Infrastructure 1.2. I know this can be done on LMS4.2. how about access to the shell like LMS4.2? Thanks, Kerim