Process Sheduler not posting report.

Hi All,
My Environment: Oracle 10gR2, Win 2003 Server, PT8.49.11, HRCS9.0, Weblogic 9.2, Tuxedo 9.1
I just configured the Process Scheduler and when I run it to post a report it doesnt.
When I check the Message Log on PeopleSoft page from System Process Request
it listed this:
Process request completed successfully.
HTTP Transfer error
NULL HTTP response - check Report Repository web server.
PSNT failed to post files to the report repository. Server scheduled to try again on 2009-05-26-15.59.13.999875. See log And here is an excerpt of the log.
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](3)    Server action mode: Submitting request
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](3)    Number of New Process Request(s) To Start: 1
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](3) (NET.113): Client RunAeAsync1 service request succeeded
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](0)    Process Instance: 569 was initiated on the Application Engine Tuxedo Server (PSAESRV)
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](3)    Starting process: 569
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](2)         Process Name: PRCSYSPURGE
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](2)         Process Type: Application Engine
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](3)        Parm List:     -CT ORACLE -CD HRCS -CO PS -CP OPRPSWD -R PurgePSNT -I 569 -AI PRCSYSPURGE -OT 6 -FP F:\psft\HR90DevOra\appserv\prcs\HRCS\log_output\AE_PRCSYSPURGE_569\ -OF 2
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](3)    AESRV (Tuxedo) ID:    1
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](3)         Session Id:   580
PSPRCSRV.4100 (0) [05/26/09 15:42:25 PS@HELIUM](2) =====================================================================
PSPRCSRV.4100 (0) [05/26/09 15:42:41 PS@HELIUM](3)    Server: PSNT checking status...
PSPRCSRV.4100 (0) [05/26/09 15:42:41 PS@HELIUM](3)    Server action mode: Ok (looking for requests)
PSPRCSRV.4100 (0) [05/26/09 15:42:41 PS@HELIUM](3)    Server: PSNT looking for work
PSPRCSRV.4100 (0) [05/26/09 15:42:41 PS@HELIUM](3)    HeartBeat alarm on. Checking server state...
PSPRCSRV.4100 (0) [05/26/09 15:42:41 PS@HELIUM](3)    Checking Process cancels...
PSPRCSRV.4100 (0) [05/26/09 15:42:41](3) (NET.113): Client ChkAeStatus1 service request succeeded
PSPRCSRV.4100 (0) [05/26/09 15:42:41](3)   Number of requests removed from Task Active List: 1
PSPRCSRV.4100 (0) [05/26/09 15:42:41](3)      Requests found in Process Request table         1
PSPRCSRV.4100 (0) [05/26/09 15:42:42](3)    Server: PSNT checking status...
PSPRCSRV.4100 (0) [05/26/09 15:42:42](3)    Server action mode: Submitting request
PSPRCSRV.4100 (0) [05/26/09 15:42:42](3)    Number of New Process Request(s) To Start: 1
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](3) (NET.113): Client RunAeAsync1 service request succeeded
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](0)    Process Instance: 570 was initiated on the Application Engine Tuxedo Server (PSAESRV)
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](3)    Starting process: 570
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](2)         Process Name: PSXPARCHATTR
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](2)         Process Type: Application Engine
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](3)        Parm List:     -CT ORACLE -CD HRCS -CO PS -CP OPRPSWD -R PurgePSNT -I 570 -AI PSXPARCHATTR -OT 6 -FP F:\psft\HR90DevOra\appserv\prcs\HRCS\log_output\AE_PSXPARCHATTR_570\ -OF 14
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](3)    AESRV (Tuxedo) ID:    1
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](3)         Session Id:   580
PSPRCSRV.4100 (0) [05/26/09 15:42:42 PS@HELIUM](2) =====================================================================
PSPRCSRV.4100 (0) [05/26/09 15:42:57 PS@HELIUM](3)    Server: PSNT checking status...
PSPRCSRV.4100 (0) [05/26/09 15:42:57 PS@HELIUM](3)    Server action mode: Ok (looking for requests)
PSPRCSRV.4100 (0) [05/26/09 15:42:57 PS@HELIUM](3)    Server: PSNT looking for work
PSPRCSRV.4100 (0) [05/26/09 15:42:57 PS@HELIUM](3)    Checking Process cancels...
PSPRCSRV.4100 (0) [05/26/09 15:42:57](3) (NET.113): Client ChkAeStatus1 service request succeeded
PSPRCSRV.4100 (0) [05/26/09 15:42:57](3)   Number of requests removed from Task Active List: 1
PSPRCSRV.4100 (0) [05/26/09 15:43:12](3)    Server: PSNT checking status...
PSPRCSRV.4100 (0) [05/26/09 15:43:12](3)    Server action mode: Ok (looking for requests)
PSPRCSRV.4100 (0) [05/26/09 15:43:12](3)    Server: PSNT looking for work
PSPRCSRV.4100 (0) [05/26/09 15:43:12](3)    Checking Process cancels...Thanks and regards,
Texas!

We are facing weird issues in dev related to process scheduler posting
Tools : PT 848(17)
Application : HCM 9.0
Unix Process Scheulers - Two
NT Scheduler - One
Issue : When report ran from Unix 2, reports are not posting. Unix -1 is fine. This only happening in Dev only, Prod and test looks good (Initially happening in all and able to fix in prod and test).
Error Message :http transfer error, SchedulerTransfer Servlet error (Distribution Server log)
I' ve verified process schedular config and web server config files they also looks good.
Initially nodes configuration
1) HTTP1 (Unix -mysite.psapp.com)
URL : http://mysite.psapp.com:16004/psreprts/prd
URI :mysite.psapp.com
URI Resource : Scheduler/prd
2) HTTP2 (Unix2 -mysite.psdev.com ) : Same as above
Note: Not posting in Unix2 (All three dev, tst, prod).
Modified
1) No changes
2) HTTP2 (Unix2--mysite.psdev.com )
URL : http://mysite.psdev.com:16004/psreprts/prd
URI :mysite.psdev.com
URI Resource : Scheduler/prd
Note: After modifying Prod, test are posting properly, not in dev
Verified all the below areas Nicolas siggested. Configuration looks good.
1. did you set your local node as trusted node (peopletools/security/security objects/single signon)?
Yes
2. did you set a default user and password in your local node (peopletools/integration broker/integration setup/nodes) ?
Yes
3. did you create a report node and how (peopletools/process scheduler/report nodes) especially URI Resource (something like SchedulerTransfer/+dbname+) ?
Yes
4. did you give this report node to your process scheduler distibution (peopletools/process scheduler/server - tab distribution) ?
Yes
5. if PS user is managing the process scheduler (cf USERID/USERPWD in psprcs.cfg file), does he got the ReportDistAdmin and/or Process Scheduler Admin roles (peopletools/security/user profiles/user profiles/+your_user+ then tab ROLES) ?
Ans: PS user only has Process Scheduler Admin, even adding does not resolved the issue
Any suggestions?
Thanks,
Kay

Similar Messages

FSCM 9.0: COBOL Process does not post credit accounts of a Journal Entry

Folks,
Hello. I am working on FSCM 9.0 General Ledger module. COBOL process GLPPPOST posts only debit accounts of a journal entry into PS_LEDGER table but not credit accounts of a journal entry. Can any folks understand how to solve the issue ?

Folks,
Hello. Thanks a lot for replying.
I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
"Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

Reports not posting from one server

We're on PT 8.48.10, HRMS 8.8. We have two web servers which are load balanced with a Cisco load balancer (don't have specifics on the load balancer model, but I can request it if need be. I know sticky sessions and source address NATing are enabled). We have two app servers and one process scheduler, all on AIX 5.3. ServerA has a web server, app server and process scheduler on it. ServerB has a web server and app server. The report repository is set up to use ServerA's web server. The report repository is on an NFS mount shared between the two servers. Both servers have read/write permissions to the share.
We recently went to SSL terminating at the load balancer. We are using HTTP distribution, making the URL the VIP address (https://vip.intranet:8380/psreports/hrms), the URI is using http with the URI Host set to ServerA.intranet and URI port 8380 (the SSL port to the load balancer and the actual web server port are the same). The URI resource is SchedulerTransfer/hrms.
The issue we're experiencing is that if the load balancer puts the user on ServerA, then there is no issue with reports posting. If they get put on ServerB, the reports go to Not Posted status. The message logs shows the following:
+2:02:37PM PSUNX failed to post files to the report repository. Server scheduled to try again on 2012-02-06-12.02.51.000919. See log+
+10 2:02:52PM Report Repository URL is: http ://ServerA.intranet:8380/Scheduler Transfer/hrms (63,68)+
+10 2:02:52PM Error getting report repositor y location. (63,85)+
+10 2:02:52PM SchedulerTransfer Servlet error.+
+10 2:02:52PM Successful Http Reply Code: 20 0 - OK (63,57)+
+2:02:52PM HTTP transfer error.+
The space in "SchedulerTransfer" is not in the report node setup. The DSTAGNT log didn't give much more detail:
PSDSTSRV.1167494 (9) [02/06/12 12:02:37 PostReport](3) HTTP transfer error.
I was thinking that maybe there is something wrong or missing in the /etc/hosts file, but I'm not sure what. Also, I swtiched the report node to be on ServerB, and then ServerA could not post reports. Any ideas or suggestions?

Hi,
A few possible things you might want to check:
1.
Portal URI in the portal tab of the default local node, is this pointing to the correct webserver url and port
2. Check firewall rules (ports) between processcheduler and webservers
3.
Is psreports on both webservers a valid directory as mentioned in configuration.properties and validate write access on psreports folder
4.
URI host and port on Proces Sheduler Report node, is is this pointing to the correct webserver url and port

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

On Submit process not firing -report (PL/SQL function returning SQL query)

Can anyone suggest possible causes / solutions for the following problem?
I have a report region that uses a PL/SQL function returning SQL query. The report allows the user to update multiple fields / rows and then click a button to submit the page which should run the On-Submit process to update the database. However the process does not run and I get a 'HTTP404 page cannot be found' error; and when I navigate back using the Back button I cannot then navigate to any other page in my application without getting the same error. The button was created by a wizard selecting the options to submit the page and redirect to a (same) page. The button does not actually have a redirect in its definition but the wizard created a branch to the same page which should work and the button has the text 'submit as SUBMIT' next to it so it appears to be set up correctly.
I have recreated this page several times in my application and I cannot get the On-Submit process to run. However I have created a cut down version of the same page in the sample application on apex.oracle.com at http://apex.oracle.com/pls/otn/f?p=4550:1:179951678764332 and this works perfectly so I am at a loss to understand why it does not work in my application. I cannot post any part of the application itself but if anybody would like to check out page 30 of the sample application (Customer Update Test tab) updating the surnames only, using credentials ja, demo, demo this is pretty much what I have got in my application.
Any ideas would be much appreciated?

Thanks for the suggestions guys. I have now identified that the problem goes away when I remove the second table from my report query. The original report query retrieved data from two tables and the process was updating only one of the tables. I thought I had approached the task logically i.e. first get the report to display the records from the two tables, then get the process to update the first table and finally to modify the process further to update the second table.
Can anyone point me to an example of multiple row updates on multiple tables using a PL/SQL function returning an SQL query?

Reports are not posting with report repository webserver configured for Sin

Hi Everyone,
We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
Report Node Definition
Node Name: uadb1
URL: https://dv001.test.com:8450/psreports/uadb1
Connection Information
https
URI Port: 8450
URI Host: dv001.test.com
URI Resource: SchedulerTransfer/uadb1
Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

Duplicated thread : Reports not posting if using Single Signon webserver as report repo
Nicolas.

FSCM 9.0: COBOL Process GLPPPOST does not post Journal Entry correctly

Folks,
Hello. I am workin on FSCM 9.0 General Ledger module. "Edit Journal" is AE program that works correctly. But "Post Journal" is a COBOL program that does not works correctly.
COBOL process GLPPPOST posts only debit accounts of a Journal entry into table PS_LEDGER but does not post credit accounts of a Journal Entry into table PS_LEDGER. When run the Ledger Report, the report has only column headers and has no data.
Does FSCM 9.0 have a problem or COBOL process does not work correctly ? Can any folks help me ? Thanks.

Folks,
Hello. Thanks a lot for replying.
I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
"Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

Report node - not posted

Hi,
Reports are not getting posted and found the below message on the message log. Any help on this is highly appreciated.
Error getting report repository file statistics for process instance: 1812 (63,104)
PSUNX failed to post files to the report repository. Server scheduled to try again on 2013-09-25-13.47.49.112355. See log /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/transfer_1630.log
===========
pshcmadm@fcas111:/facs/proj/peoplesoft/PT8.52/appserv/prcs/HRSND1/log_output/_PSDSTSRVLOG $ view transfer_1630.log
about to submit ftp -vin /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/ftp_1630.txt
Connected to fcws110.fcs.facs.com.
220 "WARNING! THIS IS A PRIVATE COMPUTER SYSTEM. USAGE MAY BE MONITORED AND UNAUTHORIZED ACCESS OR USE MAY RESULT IN CRIMINAL OR CIVIL PROSECUTION. Except for some privacy rights granted by applicable law, by signing on to the system you acknowledge: You do not have any expectation of privacy in your use of the system. You are familiar with, understand, accept, and will comply with the provisions of Company Directive."
331 Please specify the password.
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
257 "/facs/.p_peoplesoft/peoplesoft/PT8.52/psreports/HRCS/20130925/1616" created
250 Directory successfully changed.
200 Switching to ASCII mode.
local: /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/AE_AEMINITEST_1812/AE_AEMINITEST_1812.stdout remote: AE_AEMINITEST_1812.stdout
229 Entering Extended Passive Mode (|||43865|)
150 Ok to send data.
226 File receive OK.
303 bytes sent in 00:00 (415.00 KB/s)
221 Goodbye.
File Transfer Successful
============

We are getting the not posted issue, only when we enable the custom sign on peoplecode.
Thanks
Soundappan

Report node is not posting

Hi All,
for last 4 days onwards im facing report node not posting in my PROD
Can you please help me on this
Im geeting bellow errorr is PT->Process scheduler->Process Monitor->Process list
1)Java exception thrown: java.la ng.SecurityException: illegal URL redirect
2)HTTP Status Code is: 902 (63,7 2)
3)HTTP transfer error
4)PSUNX failed to post files to the report repository. Server scheduled to try again on 2011-10-19-13.41.50.999989. See log
In process scheduler log file showing below errors :
Number of new entries to process: 1
PSDSTSRV.22891 (73) [10/19/11 01:03:54 PostReport](3) 1. Process Instance: 222812/Report Id: 276354/Descr: Process Scheduler System Purge
PSDSTSRV.22891 (73) [10/19/11 01:03:54 PostReport](3) from directory: /apps/psoft/hrms9/appserv/prcs/PSUAT/log_output/AE_PRCSYSPURGE_222812
PSDSTSRV.22891 (73) [10/19/11 01:03:55 PostReport](1) (JNIUTIL): Java exception thrown: java.lang.SecurityException: illegal URL redirect
PSDSTSRV.22891 (73) [10/19/11 01:03:55 PostReport](3) HTTP transfer error.
PSDSTSRV.22891 (73) [10/19/11 01:03:55 PostReport](3) Post Report Elapsed Time: 1.9200
In webserv log showing below error :
####<Oct 19, 2011 1:10:46 PM IST> <Notice> <Stdout> <prabhav> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319010046166> <000000> <SchedulerTransfer, authentication failed>
In appserv log im geeting below error
PSAPPSRV.15742 (10) [10/19/11 14:36:04 GetCertificate](3) PeopleSoft Token authentication succeeded: ICI_PS@prabhav
PSAPPSRV.15742 (10) [10/19/11 14:36:04 GetCertificate](1) (NET.502): @prabhav is an Invalid User ID, or you typed the wrong password. User ID and Password are required and case-sensitive. Make sure you're typing in the correct upper and lower case.
PSAPPSRV.15742 (10) [10/19/11 14:36:04 GetCertificate](1) (NET.346): Failed to execute GetCertificate request
Please help me on this
Thanks&Regards
SHiva
Edited by: 892205 on Oct 19, 2011 2:37 AM

What version of peopletools is it. is their a IB setup in place for the above system. can you ping the local node on the system. did u mark the local node on the single sign on tab as local node.
are their any psswds changed for the IB user on the system.
Thanks

PeopleSoft Reports 'Not Posted'

First of all I know that this a problem which has been discussed many a times here and in other websites. I have tried checking almost all the possible solutions for this and finally found that my problem is different than those already answered.
This is the problem with PeopleSoft CRM(8.8) with PT 8.45.16 and my application is running in Unix box. From process monitor, the reports are going to Posting status and finally going to 'Not Posted' status.Message log says 'PSUNX failed to post files to the report repository' then retries and finally unable to post them.
DSTAGNT Log shows :
(30) [04/15/10 08:25:53 PostReport](3) Number of new entries to process: 1
PSDSTSRV.23261 (30) [04/15/10 08:25:53 PostReport](3) 1. Process Instance: 77514/Report Id: 48766/Descr: Process Scheduler System Purge
PSDSTSRV.23261 (30) [04/15/10 08:25:53 PostReport](3) from directory: crm/appserv/prcs/CRMT2/log_output/AE_PRCSYSPURGE_77514
PSDSTSRV.23261 (30) [04/15/10 08:25:53 PostReport](3) Transfer Log: 61093, check file crm/appserv/prcs/CRMT2/log_output/_PSDSTSRVLOG/transfer_61093.log for status
PSDSTSRV.23261 (30) [04/15/10 08:25:53 PostReport](3) Post Report Elapsed Time: 0.2900
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](1) =================================Error===============================
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](1) Unable to transfer all files for Process Instance: 77514, Report Id: 48766 in Report Repo Directory: CRMT2/20100415/48766
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](2) Number of files to be transferred: 1
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](2) Number of files to be transferred: 0
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](2) =====================================================================
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](1) =================================Error===============================
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](1) Unable to post report/log file for Process Instance: 77514, Report Id: 48766
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.23261 (30) [04/15/10 08:25:54 PostReport](2) Directory: crm/appserv/prcs/CRMT2/log_output/AE_PRCSYSPURGE_77514
It is trying for 15 times and finally errors out.
Transfer Log shows :
200 Type set to A.
200 PORT command successful.
150 Opening ASCII mode data connection for AE_PRCSYSPURGE_77514.stdout.
226 Transfer complete.
3531 bytes sent in 0.00 seconds (10355.08 Kbytes/s)
221 Goodbye.
File Transfer Successful
Important Findings :
When I look into log_output folder, the output file still exists there
When I look in psreports folder which is my report nodes, I can see the file present there as well with timestamp of the last retry as per DISAGNT log
When I look in the PSDSTSRV service through PSADMIN, it gets loads everytime it tries to post the report and finally when it goes to Not Posted status it comes down to 0 load.
I checked my report node and they look correct.
So in this case, the ftp is finally working and putting the reports to the report repositary but for some reason distribution agent is not getting this information and so it is erroring out. Reports are stored in both log output and report repository.
I tried restarting process scheduler, clearing cache and deleting some old reports but still it is not helping it any way.
Any suggestions from you will be great !!!!

I checked after changing Logfence setting to 5 in process scheduler. It gave me more elaborated logs. As expected the ftp part went fine and the reports were correctly moved to psreports folder. But the process monitor still showing 'Not Posted'. When I looked back to the logs, the interesting message that I saw in Scheduler log as follws :
Invoking service PostReport
PSPRCSRV.21355 (0) [04/20/10 10:56:17](5) (NET.100): Network API tracing TUXEDO: tpalloc {type='CARRAY', subtype=NULL, len=8192}
PSPRCSRV.21355 (0) [04/20/10 10:56:17](5) (NET.100): Network API tracing TUXEDO: tpalloc return {pmem=0x00ed1fc0}
PSPRCSRV.21355 (0) [04/20/10 10:56:17](5) (NET.100): Network API tracing TUXEDO: tpacall {svc=PostReport, idata=0x00ed1fc0, ilen=45, flags=0x00000007}
PSPRCSRV.21355 (0) [04/20/10 10:56:17](5) (NET.100): Network API tracing TUXEDO: tpacall return {svc='PostReport', cd=0}
PSPRCSRV.21355 (0) [04/20/10 10:56:17](4) (NET.133): PostReport asynchronous invocation sent to Application Server
PSPRCSRV.21355 (0) [04/20/10 10:56:17](4) Async service PostReport invoked: elapsed time=0.0000
PSPRCSRV.21355 (0) [04/20/10 10:56:17](4) (NET.113): Client PostReport service request succeeded
PSPRCSRV.21355 (0) [04/20/10 10:56:17](5) (NET.100): Network API tracing TUXEDO: tpfree {pmem=0x00ed1fc0}
PSPRCSRV.21355 (0) [04/20/10 10:56:17](4) (NET.111): Client PostReport service request object destroyed
PSPRCSRV.21355 (0) [04/20/10 10:56:17](3) Number of requests removed from Task Active List: 1
It looks like it is not recognising that the reports are laready posted. PSDSTSRV process is not getting that intimation. Not sure about how it works internally, but looks like it is sending some asynchronous message is sent to App server for this? Is that breaking somewhere ther?
Also I went to the blogs and checked that in my existing installation, we have the setting already there. So, we are good with the overall configuration.
Any insight on this would be great.

Success but not Posted Process Scheduler

Hi all,
I just installed HCM 9.1 PT8.52, Demo DB, Oracle 11g Database and Windows server 2008.
I installed and configured the process scheduler (followed the steps) and created a windows service for it, that is 'Automatically started'.
When trying to run a process scheduler, I'm getting a run status 'Success' but the 'Distribution Status' is 'Not Posted'.
I suppose it is not finding the location or something?
What should I check?
Thanks.
Bechara

Thank you!
The ReportDistAdmin role was missing so I added it.
I shut down process scheduler and re-run it, but I'm still getting 'Not Posted'
Is there any additional step to do before trying the reports?
Update
And the password was missing in the default local node, I added it and it worked!
Thanks you Hakan!
Edited by: Bechara IS on Nov 8, 2012 3:39 AM

AE Process DISTSTATUS in 'Not Posted'

Hello
We have a problem with one of the AE Processes in Prod running to Success but 'Not Posted' (DISTSTATUS = '4'). All the other processes run fine with no issues. It was observerd recently by the User and was reported to us. Can you please suggest/help regarding this issue?
Details: AE has a recurrence set to run every week @ 1:00AM.
My work:
1) I deleted 2 rows (very old entries) in PS_CDM_LIST table that has a Dist Status of '1' Just to make sure that the tables PS_CDM_LIST, PSPRCSRQST & PSPRCSQUE are in Sync.
2) Altered the Prcs Defn but i did not boucne due to the unavailability of downtime.
Just to let you know i am think if a bounce of Prcs srv will help (or) If not do i need to delete and create a new recurrence??
Please Comment. Any ideas are appreaciated.
Thanks
vKing.

I altered the Prcs Defn and Log level to '5' then Re-configured all the Process Schedulers by clearing the cache. Once i restarted and reposted the content Process went to 'Not Posted' again. Additional Info i see now in the logs is...
PSDSTSRV.320414 (2) [01/17/10 21:22:54](5) (NET.100): Network API tracing TUXEDO: tpreturn {rval='TPSUCCESS', rcode=0, data=0x36bbe890, len=20, flags=0x00000
000}
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](5) (NET.100): Network API tracing TUXEDO: tpalloc {type='CARRAY', subtype=NULL, len=8192}
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](5) (NET.100): Network API tracing TUXEDO: tpalloc return {pmem=0x36bbe890}
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](3) Number of new entries to process: 1
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](3) 1. Process Instance: 2099137/Report Id: 2537560/Descr: IN_BCT_PURGE
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](3) from directory: /opt/apps/psft/fsprd/appserv/prcs/FSPRD/log_output/AE_IN_BCT_PURGE
_2099137
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](0) Context is being read without having been set yet. thisSRN=3, SetSRN=2; PCtxUser=appserv/ENG
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](0) Unhandled exception occurred. Writing crash dump to PSDSTSRV.320414/dump
PSDSTSRV.320414 (3) [01/17/10 21:23:04 PostReport](3) Switching to new log file /opt/apps/psft/fsprd/appserv/prcs/FSPRD/LOGS/PSDSTSRV.320414/dump
PSDSTSRV.369156 (4) [01/17/10 21:23:09 PostReport](3) HTTP transfer error.
PSDSTSRV.369156 (4) [01/17/10 21:23:09 PostReport](3) Post Report Elapsed Time: 19.9600
PSDSTSRV.369156 (4) [01/17/10 21:23:09](4) Service PostReport completed: elapsed time=20.1400
and to add one more piece here... Another Process is going to 'Not Posted' when the trace is set to '-trace 3' with an Append Option on prcs Defn. when the trace is removed it is going to 'Posted' again. is this some tools issue?? we are on 8.46.19. I have not seen this earlier at my Prev Clients.
Please reply if any of u faced the similar issue at your client.
Thanks
vKing.!

Processes Not Posting After Maintenance

Hi,
Periodically, processes will go to Not Posted status after we bounce the servers during our maintenance window. Usually, bouncing the process scheduler and clearing the cache does the trick. However, one in a blue moon, jobs simply will not post. We will spend hours bouncing servers, clearing caches, etc. and nothing works. Then a couple of hours later everything will start to post.
Any familiar experiences or thoughts on why this occurs?

The maintenance varies from week to week; it's generally OS-level patching that doesn't require a reboot. I've got an experienced Tech Arch team taking the servers up and down, so I'm confident that the servers are being bounced correctly.
In the past, when reports have not posted after maintenance we have shut down the process scheduler and cleared cache and reports started posting. More recently, we've bounced the servers for several hours only to have reports start posting on their own afterwards.
I pulled the stdout log and found the following:
Java exception thrown: java.net.ConnectException: Connection refused (errno:239)
HTTP Status Code is: 900 (63,72)
Error getting report repository location. (63,85)
SchedulerTransfer Servlet error. (63,74)

Getting error while posting reports on Unix Process Scheduler Server

Hello ,
I am getting the below error while posting reports on Unix Process Scheduler Server .
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
Please advise ,thank you.

user5838027 wrote:
Node name :PS_HTTP
URL: http://ddas1020.dev.com:16000/psreports/hrdmo
URI:SchedulerTransfer/hr90dmo
URI Port: 16000
Please let me know if any other info is needed.
Thanks.
typo...
URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
Did you also tried to give the web login/password ?
Nicolas.

Check Deposit List - cannot post Processing status not correct

Hi Expert,
I was trying the edit a check deposit list and I encountered error message during save.
"Cannot post. processing status not correct."
Procedure: Go into statement/list processing and save again. The processing status is then changed to 3 (revised).
How to go to statement/list processing to change to status to 3?
thank you

Hi,
Use T Code FF67,
Select the Check deposit list and click enter. Now go to Settings > Specifications
Here you will find the "Processing Status" for you to continue.
Regards
AKV

Process Sheduler not posting report.

Similar Messages

Maybe you are looking for