Process shipment status (ANSI x12 214)

Hi,
We would like to integrate with our carrriers and as a start we would like to receive the shipment status back into SAP. The EDI message that our carrier will be sending is the ANSI x12 214. Can someone explain the actions that need to be taken to process these messages into our SAP system? We are using ECC6.0.
Regards,
Ed

HI
I am unsure about the Idoc type or message type which reciev the shipment status from the carrier. once we have the Message type we can do necessary set of Idoc configuration and run the shipment file which we will receive from EDI sub system and load in to SAP tables or transactions.
Regards,
Ram.

Similar Messages

Steps to Process standard EDI ANSI X12 997 file from AS2 Server

Hi All,
I have a scenario where we are receiving PO files from an EDI third party via AS2 adapter.
In return, we are sending PO Acknowledgement and Invoice files to the third party via AS2 adapter.
The fomat of the incoming and outgoing files are ANSI X12 (850 for PO, 855 for PO Ack and 810 for Invoices).
Currently client has informed that they are going to send an EDI ANSI X12 997 (Functional Ack) file for each PO Ack or Invoice they receive.
Kindly let me know steps to configure in SAP PI 7.1 to accept the inbound 997 files successfully and place them as it is in PI application server.
Regards,
Subhajit.

Hi , I too have the same requirement.
i am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
I followed all the steps to create EDI X12 810 ecs file, converted this to .xsd and then to .dat in Oracle Document Editor as explained in the B2B user guide.
I also configured the trading partner , created agreements and deployed in B2B console. There is no mistake . as i can able to see the def file while configuring Oracle B2B in my Jdev.
I deployed the same process . But no instance is creating for my process. I also configured listing channel to Generic File 1.0. please help me out in this . Thank you.

ANSI X12 xsd of edi 110 and edi 214 document

Hello All,
Pl can anyone of you tell me from where to get XSDs of
edi 110 and edi 214 document (ANSI X12).
thanks, in advance
Sharada

HI,
Usually when u buy a Seeburger license you need to import the Seeburger software component version in IR and once you immport that you will get the Std seeburger XSD in external definition.
Thnx
Chirag

IDOC Types and their equivalent messages in EDIFACT and ANSI X12

Hi all, since I only have a list of messages in EDIFACT and ANSI X12 for release 4.6 B, I need to update the list from 6.0 version, but I don't have online support system to get it (OSS), it's note 104606 in OSS.
Can somebody give me a link to the full new updated list? Will surely give points with your helpful answers
Regards,

Hi,
Please check these perhaps they may help.
Mapping ANSI X12 to SAP Message Type and IDoc Type:
204 Motor carrier shipment information
The logical message is SHPMNT or IFTMIN, the IDoc type SHPMNT03.
214 Transportation carrier shipment status message
The logical message is TRXSTA, the IDoc type TRXSTA01. Inbound processing is supported.
304 Shipping instructions
The logical message is SHPMNT or IFTMIN, the IDoc type SHPMNT03.
810 Invoice or billing document (also 880), EDI - Inbound INVOIC posting configuration
The logical message is INVOIC, the IDoc type INVOIC01.
812 Credit and debit advice
The logical messages are CREADV or DEBADV, the IDoc types PEXR2001 and PEXR2002.
820 Payment order and credit advice
For the payment order, the logical message is PAYEXT (REMADV), the IDoc types PEXR2001 and PEXR2002.
For the credit advice (ERS - Evaluated Receipt Settlement), the logical message is GSVERF, the IDoc type GSVERF01.
823 Lockbox
The logical message is LOCKBX, the IDoc type FINSTA01. Inbound processing is supported.
830 Delivery schedule (LAB)
The logical message is DELINS (from the EDI standard ODETTE) or DELFOR, the IDoc type is DELFOR01.
832 Price catalog (also 879, 888, 889)
The logical message is PRICAT, the IDoc type PRICAT01. Outbound processing is supported.
834 Benefit enrollment and maintenance
The logical message is BENREP, the IDoc type BENEFIT1. Outbound processing is supported.
840 Request
The logical message is REQOTE, the IDoc types ORDERS01 to ORDERS04.
843 Quotation
The logical message is QUOTES, the IDoc types ORDERS01 to ORDERS04. Outbound processing is supported.
850 Purchase order or order (also 875)
The logical message is ORDERS, the IDoc types ORDERS01 to ORDERS04.
852 Stock and sale data
The logical message is PROACT, the IDoc type PROACT01.
855 Ordering or order response (also 865)
The logical message is ORDRSP, the IDoc types ORDERS01 to ORDERS04.
856 Transport and shipping notification (ASN - Advanced Ship Notification)
For transport in the SAP application, the logical message is SHPMNT or SHPADV, the IDoc types SHPMNT01 to SHPMNT03.
For delivery in the SAP application, the logical message is DESADV, the IDoc types are DESADV01 (expires) or DELVRY01 and DELVRY02.
860 Ordering or order modification (also 876)
The logical message is ORDCHG, the IDoc types ORDERS01 to ORDERS04.
861 Credit advice (ERS - Evaluated Receipt Settlement)
The logical message is GSVERF, the IDoc type GSVERF01.
862 delivery schedule (FAB)
The logical message is DELINS (from the EDI standard ODETTE) or DELJIT, the IDoc type is DELFOR01.
864 Text message
The logical message is TXTRAW, the IDoc type TXTRAW01. Inbound processing is supported.
940 Shipping order and stock order
The logical message is SHPORD or WHSORD, the IDOC type DELVRY01.
945 Shipping confirmation and stock confirmation
The logical message is SHPCON or WHSCON, the IDoc type DELVRY01.
997 Functional Acknowledgment
This is a technical confirmation. This is not exchanged via an individual message but the status report for IDoc processing. The status values used are:
"22" Shipping OK, acknowledgment has yet to come
"16" Functional Acknowledgment positive
"17" Functional Acknowledgment negative
The status values "14" and "15" are available for the Interchange Acknowledgment accordingly.
Regards,
Ferry Lianto

EDI ANSI X12 and relavent IDOC types and messages...

Hi ,
    Is there any place where we can get the relevant Idoc types and messages for EDI Transacitons below:
210 -Motor Carrier Freight Details and Invoice
240 -Motor Carrier Package Status
753 -Request for Routing Instructions
754 -Routing Instructions
816-ORGANIZATIONAL RELATIONSHIPS
828-Debit Authorization
846- Inventory Inquiry/Advice
870-Order Status Report
Could you please help me?
Thanks and regards,
gowri

EDI ANSI X12 and relavent IDOC types and messages...
Posted: May 25, 2006 8:44 PM        Reply      E-mail this post
Hi Ravi,
     Thanks a lot for the reply. I have already checked this. In the ittoolbox.com is having some info about 214 but not about 210 and 240. I have already gone through the sapgenie.com but could able to get the relevant info on below transactions.I am basically looking for relevant idoc types and messages in SAP for the below ansix12 transactions .
Is there any place where we can get the relevant Idoc types and messages for EDI Transacitons below:
210 -Motor Carrier Freight Details and Invoice
240 -Motor Carrier Package Status
753 -Request for Routing Instructions
754 -Routing Instructions
816-ORGANIZATIONAL RELATIONSHIPS
828-Debit Authorization
846- Inventory Inquiry/Advice
870-Order Status Report

Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214

Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AM

Hi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu

Help needed on mapping information for AT701 element in EDI X12 214 Transportation type (X12_00401_214 schema)

Hi all,
As per the EDI defined standard schema, AT701 element takes the following Enumeration values.
<xs:element minOccurs="0" name="AT701" type="X12_ID_1650">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo notes="Shipment Status Code_1650" />
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:simpleType name="X12_ID_1650">
<xs:restriction base="xs:string">
<xs:enumeration value="A3" />
<xs:enumeration value="A7" />
<xs:enumeration value="A9" />
<xs:enumeration value="AF" />
<xs:enumeration value="AG" />
<xs:enumeration value="AH" />
<xs:enumeration value="AI" />
<xs:enumeration value="AJ" />
<xs:enumeration value="AM" />
<xs:enumeration value="AN" />
<xs:enumeration value="AP" />
<xs:enumeration value="AR" />
<xs:enumeration value="AV" />
<xs:enumeration value="B6" />
<xs:enumeration value="BA" />
<xs:enumeration value="BC" />
<xs:enumeration value="C1" />
<xs:enumeration value="CA" />
<xs:enumeration value="CD" />
<xs:enumeration value="CL" />
<xs:enumeration value="CP" />
<xs:enumeration value="D1" />
<xs:enumeration value="I1" />
<xs:enumeration value="J1" />
<xs:enumeration value="K1" />
<xs:enumeration value="L1" />
<xs:enumeration value="OA" />
<xs:enumeration value="OO" />
<xs:enumeration value="P1" />
<xs:enumeration value="PR" />
<xs:enumeration value="R1" />
<xs:enumeration value="RL" />
<xs:enumeration value="S1" />
<xs:enumeration value="SD" />
<xs:enumeration value="X1" />
<xs:enumeration value="X2" />
<xs:enumeration value="X3" />
<xs:enumeration value="X4" />
<xs:enumeration value="X5" />
<xs:enumeration value="X6" />
<xs:enumeration value="X8" />
<xs:enumeration value="XB" />
</xs:restriction>
</xs:simpleType>
Now, in my sample input file I am having a column "MileStone", and for example: If I have
"Picked Up Date" in that column, I need to pass "A3" as the value for
AT701 element as per the above code snippets.
Please let me know how to map the "Milestone to "AT701" element.
If I straight away map those two fields, I am getting the below error :
error btm1046: Output validation error: The 'AT701' element is invalid - The value 'MileStone_0' is invalid according to its datatype 'http://schemas.microsoft.com/BizTalk/EDI/X12/2006:X12_ID_1650' - The Enumeration constraint failed.
So, please guide me on how to map the above fields using the functoids.
Thanks in Advance..

Hi Anand,
You can try
Value Mapping functiod along with Logical Equal functiod for this requirement.
Connect the element “MileStone”
to the Logical Equal functiod as the it’s first parameter. And add “Picked Up Date”
as the second parameter.
Connect output of the Logical Equal functiod as the first parameter to the Value Mapping functiod and “A3"
as the second parameter.
Connect the output of
Value Mapping functiod “AT701”
element.
This maps the value “A3”
to the element “AT701”, if the value of “MileStone” element is
“Picked Up Date”
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

ANSI X12 meta data availability in conversion agent??

Hello,
Is there a provision for availability of ANSI X12 meta data in SAP conversion agent. We are trying to process EDI orders using the X12 INDUSTRY standard. Please advise.
-Kris

hi,
SAP Conversion Agent together with SAP Net Weaver, enables to automate complex integration activities for a multitude of data and document formats. These include unstructured and partially structured documents such as Office files, data streams, printing applications, and other application-specific formats.
Easily integrate unstructured and semi-structured data into SAP Net Weaver Process Integration using the Conversion Agent.
Conversion Agent dynamically converts unstructured messages from   Microsoft Word,Excel,PDF plain text.
Semi-structured formats such as HL7,SWIFT,HIPA, ANSI X12 and COBOL to   PI understandable SOAP XML.
          So that it helps to easily integrate the information need into the back-end systems. Conversion can also be used as the reverse process to convert from XML to unstructured or semi-structured formats
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sap%2bconversion%2bagent%2b-%2bthe%2blong%2bjourney
Conversion Agent - Handling EDI termination characters
Conversion Agent a Free Lunch?
Integrate SAP Conversion Agent by Itemfield with SAP XI
regards
sr

ANSI X12 867 Outbound or Inbound... ?

Hi All.
My client want to send idoc type 867. i dont understand is this a inbound idoc or out bound. I was told that 867 is SLSRPT message type in SAP but not able to locate its process code. can some one give me its details like the process code, message type and idoc type for sending ANSI X12 867. what are the setting we need to do in order to send 867's as an outbound...?
Thanks
Chindam P.

Hi ravi,
Thanks for your reply. I went into SAP to see what is this PROACT and i could see it as inbound and the process code is IDOC_INPUT_PROACT but i need a outbound where i want to trigger a outbound idoc which sends 867's.
Thanks....

Shipment status report

Hi,
    Can anyone send me shipment status report program.
Its very urgent.
Reward Points ...Sure...
Ashok...

CHeck if these are useful...
RV56OSSM                       Overall Shipment Status Monitor
RV56STSM                       Shipment Tendering Status Monitor

R12 Payment Process Request Status Report adding extra columns to XML data.

In 11i, we had modified the Preliminary Payment Report to include extra columns ( invoice distributions). In r12 , that report is obsolete and Oracle introduced a new report "Payment Process Request Status Report". This request uses BI Publisher to generate the final report output. I am unable to modify the template since the XML output of the report does not
contain the invoice distribution account data. We need to know how can we modify the XML data to include the extra columns.
For Funds Disbursement Process ( Payment Instruction File) , Oracle provides IBY_FD_EXTRACT_EXT_PUB extensibility package to construct custom XML element structure that can be added to the payment XML extract generated by Oracle Payments. Do we have something similar for this report ? Are there any other options available ?
Thanks

Hi
The same package "IBY_FD_EXTRACT_EXT_PUB" works for payment process request status report also. Please add the logic to get the distribution data in this package and you will see the new XML tags in this report also.
Hope this helps.
Vinit

IDOC - XI - ANSI X12

Hi
I am working on a scenario iDOC - XI - ANSI X12.I am following the best practices guide provided by SAP .I am using conversion agent to convert the idoc to Ansi X12 format .For that I have created a serializer and deployed that on DBservice folder of the XI server .But after configuring the file adapter with module parameter I am getting runtime errors ." Could not parse Channel " and " Could not parse Outbinding with Objectid:".I found this errors in RWB cache monitoring .Can any one provide me some document for this scenario specific to the setting for conversion agent service in file adapter?
Thanks
-Alok

Hi
Have a look
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1e545914-0b01-0010-5a9d-c52a4bffdbab
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4415b8634ba49b0f62a75dc415adc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5c/895738d1884d50e10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
Replacing EDI subsystem with SAP XI
/people/lionel.biennier/blog/2006/07/21/sap-xi-supports-edi-x12
XI with EDI Format
Thanks

Payment Process Request Status Report - unmask bank account number

Dears,
My requirement is to unmask bank account number in Payment Process Request Status Report (short code: IBY_FD_PPR_STATUS_PRT). It is possible to achieve?
Thanks for any help and suggestions.
Rgds,
Marcin

Sunil wrote:
Guys,
Can you please tell me what is the Data Definition name associated with Payment Process Request Status Report.
Looking forward to your replies.
Thanks.
-SunilLogin to (XML Publisher Administrator) responsibility and click on Templates, query "Payment Process Request Status Report" and click on Go and this should show the "Data Definition". You can also click on "Payment Process Request Status Report" link and get all the details (Template Files, File name, Localized/Translatable Template ..etc).
Thanks,
Hussein

Payment Process Request Status Report - Add Invoice Distribution Section

Hi,
I posted this in the E-Business Financial forum, but I think this is the right forum to seek for an answer to my question.
In R12.1.3, I need to add Invoice Distribution details into "Payment Process Request Status Report" report. I know that function "Get_Docline_Ext_Agg" in package "IBY_FD_EXTRACT_EXT_PUB" needs to be extended, but I do not know how to do it when it involves adding a new level of records into the XML, assuming that an invoice line can have multiple distribution entries, the function return could not simply be an aggregate value but instead needs to be a collection of records, so I can loop throug them in the RTF tempalte using for-each statement.
Please let me know if this makes sense and/or if you had to deal with a similar issue.
Thanks,
Sinan

Hi,
Is this the right forum to post this question?
I would appreciate any comments.
Thanks,
Sinan

Process Chain Status Red, DTP status yellow, DTP is green from inside

Hello All,
I have a problem where the Process Chain status is red, but the process(DTP) status is yellow.
When I right click on the yellow process there is no error message and the DTP is green in Process Monitor.
But the chain did not complete and the rest of the process steps are grey.
After 20 minutes the Process Chain ran again(automatically after new data arrived) and this time without errors and it went green.
My question is, how to proceed with the red Process chain and complete the further process and make it green.
Regards
Alex

hi,
There are scenarios where you need to change status of a process chain or a particular step in process chain.
You might need to change the status in the cases where we need mark these steps successful so that dependent steps get processed. There are other scenarios where one needs to change the status of a single step in the process chain or status of whole process chain.
Step by step instructions on change process chain status
1. Right click on the failed step in the process chain monitor and go to displaying messages
2. Go to u2018Chainu2019 tab and note down variant, instance and start date
3. Go to SE16 and the table RSPCPROCESSLOG and enter variant, instance and start dates from step 2 and note down log_id, type, variant, instance.
4. Go to SE37 transaction and execute the function module RSPC_PROCESS_FINISH and enter the values from step 3 and enter the new status u2018Gu2019 in status field and execute the FM
5. This sets the status of the process chain (PC)
After you set the status using the FM, go to the monitor screen of the process chain, you will notice the changed status. Now dependent steps in the process chain will start running
Thanks

Process shipment status (ANSI x12 214)

Similar Messages

Maybe you are looking for