Process signature in BPM

Hi XI guru's,
Please let me know about Process signature in BPM.
Thanks and regards
sai

Hi,
Check this link.
http://help.sap.com/saphelp_nw70/helpdata/en/1e/7d18044185b4438c661bd2ed0472aa/content.htm
Regards,
Sudheer.

Similar Messages

Javax.xml.rpc.soap.SOAPFaultException: Failed to process signature.null

Hi Folks,
I was trying to do the tutorial "Securing Services Using the AquaLogic Service Bus", but when I called the Web Service Method I got the error message listed bellow.
What happened ?
Tutorial link:
"http://dev2dev.bea.com/pub/a/2006/04/securing-service-bus.html?page=1"
Exception:
"Unable to invoke service: SOAPFaultException - FaultCode [{http://schemas.xmlsoa
p.org/soap/envelope/}Server] FaultString [Failed to process signature.null] Faul
tActor [null]No Detail; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Failed to process signature.null
java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://schemas.xmlsoa
p.org/soap/envelope/}Server] FaultString [Failed to process signature.null] Faul
tActor [null]No Detail; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Failed to process signature.null
at webservice.Echo_Stub.doEcho(Echo_Stub.java:37)
at webservice.EchoServiceClient.main(EchoServiceClient.java:48)
Caused by: javax.xml.rpc.soap.SOAPFaultException: Failed to process signature.nu
ll
at weblogic.wsee.codec.soap11.SoapCodec.decodeFault(SoapCodec.java:265)
at weblogic.wsee.ws.dispatch.client.CodecHandler.decodeFault(CodecHandle
r.java:106)
at weblogic.wsee.ws.dispatch.client.CodecHandler.decode(CodecHandler.jav
a:91)
at weblogic.wsee.ws.dispatch.client.CodecHandler.handleFault(CodecHandle
r.java:79)
at weblogic.wsee.handler.HandlerIterator.handleFault(HandlerIterator.jav
a:254)
at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.
java:224)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.handleResponse(Clie
ntDispatcher.java:161)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDisp
atcher.java:116)
at weblogic.wsee.ws.WsStub.invoke(WsStub.java:89)
at weblogic.wsee.jaxrpc.StubImpl._invoke(StubImpl.java:335)
at webservice.Echo_Stub.doEcho(Echo_Stub.java:32)"

Hi Folks,
I was trying to do the tutorial "Securing Services Using the AquaLogic Service Bus", but when I called the Web Service Method I got the error message listed bellow.
What happened ?
Tutorial link:
"http://dev2dev.bea.com/pub/a/2006/04/securing-service-bus.html?page=1"
Exception:
"Unable to invoke service: SOAPFaultException - FaultCode [{http://schemas.xmlsoa
p.org/soap/envelope/}Server] FaultString [Failed to process signature.null] Faul
tActor [null]No Detail; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Failed to process signature.null
java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://schemas.xmlsoa
p.org/soap/envelope/}Server] FaultString [Failed to process signature.null] Faul
tActor [null]No Detail; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Failed to process signature.null
at webservice.Echo_Stub.doEcho(Echo_Stub.java:37)
at webservice.EchoServiceClient.main(EchoServiceClient.java:48)
Caused by: javax.xml.rpc.soap.SOAPFaultException: Failed to process signature.nu
ll
at weblogic.wsee.codec.soap11.SoapCodec.decodeFault(SoapCodec.java:265)
at weblogic.wsee.ws.dispatch.client.CodecHandler.decodeFault(CodecHandle
r.java:106)
at weblogic.wsee.ws.dispatch.client.CodecHandler.decode(CodecHandler.jav
a:91)
at weblogic.wsee.ws.dispatch.client.CodecHandler.handleFault(CodecHandle
r.java:79)
at weblogic.wsee.handler.HandlerIterator.handleFault(HandlerIterator.jav
a:254)
at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.
java:224)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.handleResponse(Clie
ntDispatcher.java:161)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDisp
atcher.java:116)
at weblogic.wsee.ws.WsStub.invoke(WsStub.java:89)
at weblogic.wsee.jaxrpc.StubImpl._invoke(StubImpl.java:335)
at webservice.Echo_Stub.doEcho(Echo_Stub.java:32)"

Process Patterns in BPM

what is process pattern in BPM? How many Process Patterns are there namely?
Please REPLY urgently?

Hi vinod sharma ,
The following websites give u complete details on Process Patterns in BPM :
BPM Process Patterns Repeatable Designs for BPM Process Models
http://edocs.bea.com/albsi/docs55/pdfs/BPM%20Process%20Patterns%20White%20Paper.pdf
An introduction to Business Process Management
http://www.avelon.nl/downloads/Introduction_BPM.pdf
Business Process Management -Modeling to Execution
http://www30.sap.com/korea/company/events/techday05/img/data_06.pdf
BUSINESS PROCESS MANAGEMENT (BPM)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ed49db90-0201-0010-c4a5-c520866a19c7
BPM Process Patterns:Repeatable Design for BPM Process Models
http://www.bptrends.com/publicationfiles/05%2D06%2DWP%2DBPMProcessPatterns%2DAtwood1%2Epdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Monitor Integration process log in BPM

Hi
I am practising the following BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
and I wanted to know how to monitor integration process log in BPM.
To monitor Integration process I logged, into transaction SXMB_MONI_BPE ->Process Selection->Selected corresponding integration process (in Service Field) - and Clicked Execute as suggested in the blog
But I get the message work item doesn't exist ??
What do I need to do in this case ??
Thanks,
Kiran

SAKHARDANDE ,
Go to sxmb_moni-->Monitor for processed xml message --> In the view box there is standard and process. Select Process for checking the messages of BPM.
Else as in the weblog mentioned go to SXMB_MONI_BPE ->Process Selection->Select corresponding integration process (in Service Field) ->Execute->Select work item. Select your service which you have used in ID.
If you dont find anything then first see whether you see your message in sxmb_moni or not? If not then check your file sender communicaiton channel in adapter monitoring.
Regards,
---Satish

Partner interface process (pip) in BPM

can you give an idea abt partner interface process (pip) in BPM???

I think PIP is not related to ccBPm (XI related)
Rather, it is related to business process for trading partners.
See this
http://www.service-architecture.com/web-services/articles/partner_interface_process_pip.html
Regards,
Prateek

Calling BPM Sub Process from another BPM Process - Stuck at Sub Process

Hi
JDeveloper 11.1.1.6, BPM 11.1.1.6, WLS 10.3.6
I am trying to Call a BPM Process from another BPM Process. Both the processes are defined in the same BPM Project.
Both the Processes have 'None' Start and End activities.
The 'Parent Process' has a 'Call Activity' which calls the 'Sub Process'.
The Sub process takes a parameter of payload object as input and returns output (also same payload object)
I have passed the payload object from parent to sub process in the 'Data Associations'.
The Start and End activities in the sub process also have the data associations set where I am passing the payload object from parent process to child process.
When I run the process and see the Enterprise Manager console - Audit Trail / Flow tabs,
Flow Tab - The progress of the process is showing only till the Calling of the sub process in the Parent Process. It does not show the Sub Process.
Audit Trail Tab - Shows that the Sub Process is called but has not reached to the End of the Sub process.
The audit trail does not have links to the sub process activities.
I cannot see any exceptions as well in the audit trail.
How can I find out why the process is stuck? Or what is going on in the process?
Please let me know if my explanation is not clear?
Thanks for any help
Regards
Sameer

Thanks for replying.
I have another Sub Process with Start and End events as Message Events and used Send Task and Receive Task (Implementation : Process Call) in the Main process to invoke the sub process asynchronously.
Then, the Sub Process is shown in the 'Flow Trace' as child of the main process.
In this particular one, I used 'Call Activity' to call the sub process.
So the Audit trail is showing the sub process as a child.
But what I was trying to say is that the audit trail did not have links to the entries in the 'Event' column (in Enterprice manager - instance window). (like Instance entered activity, Instance left activity etc).
I was intending to use these links to see the payload information and try to debug if there is any problem with the code.
The actual problem I was trying to say in the post is that, even after the user responds to the activity (User Task - Approval) in the Sub process,
the audit trail is not proceeding further.
In the Sub process definition, after the user task, there is End with none implementation.
Hope it is clear now.
Thanks and Regards
Sameer

How to invoke an other BPM asynchronous process from the BPM process

Do anyone know how to invoke other asynchronous process from the BPM process without using the Web Service URL?

Try using a Service task implemented as a Process Call. Then you select the process you want to call, set the associations or transformation and deploy it to test.
I hope it works for you.
isabelbernely

Mapping LDAP Role in Building Your First Process with Oracle BPM 11g

I'm working on "Building Your First Process with Oracle BPM 11g" I'm at the end of step where assigns user for the requester. The problem is in identity lookup, "Realm" is empty for Remote_WLServer.
Servers are up and running. Demo user community has been loaded - I can see the list of users and groups in the administration server under myrealm. We haven't done much since SOA suite 11g installation. I'm probably the first one who uses this. I wonder we have a missing set up? Can you me what's missing? Appreciate your help in advance.

I get this error message when I clicked gear icon.
"Server exception is : Connection refused from server"
Here is the result of testing Remove_WLServer connection. Does this cause the issue?
Testing JSR-160 Runtime ... failed.
Cannot establish connection.
Testing JSR-160 DomainRuntime ... skipped.
Testing JSR-88 ... skipped.
Testing JSR-88-LOCAL ... skipped.
Testing JNDI ... skipped.
Testing JSR-160 Edit ... skipped.
Testing HTTP ... success.
Testing Server MBeans Model ... skipped.
Testing HTTP Authentication ... success.
2 of 9 tests successful.
I have installed JDeveloper 9i, 10g, and 11g in my laptop. SOA is installed on linux.

Undeploy some processes of a BPM project

There are about a hundred of processes in a BPM project (BPM studio 10.3.0). These processes are not processes and subProcesses.
This project has been deployed to BPM standalone 10g.
Can I just undeploy and delete some of the processes (not all of them) of this BPM project?

Yes you can partially undeploy a project from BPM Administrator console.
- Login to the BPM administrator console
- select projects from the left side menu
- Click on "completely deployed" link againt the project you want to undeploy.
- click on the "Modify" button at the bottom of the page
- select undeploy only for the processes you want to undeploy and retain the other processes active.
- submit and come back to the projects screen. You will see that the project as 'Partially deployed"
regards,
Gopi

Getting completed process details using BPM API

Hi Experts,
is there any way to get the completed process details using BPM API or Analytics API for a specific process definition (in 7.31 SP10)?
my observations:
1. using getRunningProcessInstances(process_def_id) of ProcessInstanceManager, I can fetch running process instances.
but I need completed process instances.
Thanks in advance.
Best Regards
-Trim

seems no way

Deploy process in Oracle BPM Enterprise.

Hi,
I have a process which i have developed in Oracle BPM studio. Now I need to deploy this process in Oracle BPm Enterprise version. The other problem is how to access this process from enterprise. Where all the roles and participants maintained. I have oracle BPM enterprise integrated with Weblogic server.
Please help!!
Edited by: Anurag Yadav on Jul 31, 2009 12:11 PM

Download the "Oracle BPM Enterprise Administration Guide" PDF from http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html.
Take a look at pages 10 - 17. Page 17 describes how to create a new role in Enterprise.
Look at page 22. This describes how you can match the abstract roles (roles created in Studio) to real roles (roles created in Enterprise described on page 17).
In development, I'll usually just select the "Smart Publish" option as I'm publishing the project. This automatically creates a new real role on Enterprise and automatically matches it to the abstract role created in Studio while you're publishing your project.
Dan

Versioning of processes in Oracel BPM 11g

Hi,
I have a question about versioning of processes in oracle BPM 11g.
Former Oracle BPM product (Aqualogic BPM) automatically managed the versioning of processes deployed to the server. When a new version of a process was created, the server automatically determined if it is a minor or major revision and a new process version number was recommended.
Is there a similar functionality in new BPM engine?
Now, when I deploy a new version of process I can only choose between rewriting existinig revision (all active instances will stale and become unusable) or deploying new revision (all active instances will continue using previous version).
Is there a way to migrate existing instances to new process (if there were only minor changes)?
Hope someone can answer. Thnx.

This feature (migration of running instances to new version) is intended to be available in PS3 which is planned for early 2011.
I suggest you check out the release documentation for confirmation however.

11G ws proxy client gives me Failed to process signature.null

Hi
I got this error maybe someone can help me
thanks Edwin
java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://schemas.xmlsoap.org/soap/envelope/}Server] FaultString [Failed to process signature.null] FaultActor [null]No Detail; nested exception is:
     weblogic.wsee.jaxrpc.soapfault.WLSOAPFaultException: Failed to process signature.null
     at nl.ordina.ws.client.CreditCheck_Stub.checkOrder(CreditCheck_Stub.java:39)
     at nl.ordina.ws.TestWS.main(TestWS.java:65)
Caused by: weblogic.wsee.jaxrpc.soapfault.WLSOAPFaultException: Failed to process signature.null
     at weblogic.wsee.codec.soap11.SoapCodec.decodeFault(SoapCodec.java:355)
     at weblogic.wsee.ws.dispatch.client.CodecHandler.decodeFault(CodecHandler.java:115)
     at weblogic.wsee.ws.dispatch.client.CodecHandler.decode(CodecHandler.java:100)
     at weblogic.wsee.ws.dispatch.client.CodecHandler.handleFault(CodecHandler.java:88)
     at weblogic.wsee.handler.HandlerIterator.handleFault(HandlerIterator.java:309)
     at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.java:269)
     at weblogic.wsee.ws.dispatch.client.ClientDispatcher.handleResponse(ClientDispatcher.java:213)
     at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDispatcher.java:150)
     at weblogic.wsee.ws.WsStub.invoke(WsStub.java:87)
     at weblogic.wsee.jaxrpc.StubImpl._invoke(StubImpl.java:337)
     at nl.ordina.ws.client.CreditCheck_Stub.checkOrder(CreditCheck_Stub.java:34)
     ... 1 more
Caused by: weblogic.xml.crypto.wss.WSSecurityException: Failed to process signature.null
     at weblogic.xml.crypto.wss.SecurityImpl.processAndMarshalSignature(SecurityImpl.java:359)
     at weblogic.xml.crypto.wss.SecurityImpl.add(SecurityImpl.java:142)
     at weblogic.xml.crypto.wss.SecurityBuilderImpl.addSignature(SecurityBuilderImpl.java:909)
     at weblogic.xml.crypto.wss.SecurityBuilderImpl.addSignatureWithToken(SecurityBuilderImpl.java:348)
     at weblogic.xml.crypto.wss.SecurityBuilderImpl.addSignatureInternal(SecurityBuilderImpl.java:329)
     at weblogic.xml.crypto.wss11.internal.SecurityBuilderImpl.addSignature(SecurityBuilderImpl.java:351)
     at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.processIntegrity(SecurityMessageArchitect.java:904)
     at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.constructMessage(SecurityMessageArchitect.java:310)
     at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.buildWssMessage(SecurityMessageArchitect.java:136)
     at weblogic.wsee.security.wss.plan.SecurityMessageArchitect.buildWssMessage(SecurityMessageArchitect.java:119)
     at weblogic.wsee.security.wss.SecurityPolicyArchitect.processOutbound(SecurityPolicyArchitect.java:217)
     at weblogic.wsee.security.wss.SecurityPolicyArchitect.processMessagePolicy(SecurityPolicyArchitect.java:117)
     at weblogic.wsee.security.wss.SecurityPolicyConductor.processRequestOutbound(SecurityPolicyConductor.java:120)
     at weblogic.wsee.security.wss.SecurityPolicyConductor.processRequestOutbound(SecurityPolicyConductor.java:92)
     at weblogic.wsee.security.wssp.handlers.WssClientHandler.processOutbound(WssClientHandler.java:113)
     at weblogic.wsee.security.wssp.handlers.WssClientHandler.processRequest(WssClientHandler.java:68)
     at weblogic.wsee.security.wssp.handlers.WssHandler.handleRequest(WssHandler.java:92)
     at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:141)
     at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:107)
     at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDispatcher.java:132)
     ... 4 more
Caused by: weblogic.xml.crypto.dsig.api.XMLSignatureException
     at weblogic.xml.crypto.dsig.SignedInfoImpl.createSignature(SignedInfoImpl.java:101)
     at weblogic.xml.crypto.dsig.XMLSignatureImpl.sign(XMLSignatureImpl.java:204)
     at weblogic.xml.crypto.wss.SecurityImpl.processAndMarshalSignature(SecurityImpl.java:355)
     ... 23 more
Caused by: weblogic.xml.crypto.api.KeySelectorException: Failed to resolve key using SecurityTokenReference weblogic.xml.crypto.wss11.internal.bst.BSTR@160e069 URI: str_Gd32NOIPFZLwvql9
     at weblogic.xml.crypto.common.keyinfo.KeyResolver.getKeyFromSTR(KeyResolver.java:309)
     at weblogic.xml.crypto.common.keyinfo.KeyResolver.select(KeyResolver.java:127)
     at weblogic.xml.crypto.dsig.SignedInfoImpl.getSignKey(SignedInfoImpl.java:216)
     at weblogic.xml.crypto.dsig.SignedInfoImpl.createSignature(SignedInfoImpl.java:99)
     ... 25 more
Process exited with exit code 0.
this is the ws code
import javax.jws.WebMethod;
import javax.jws.WebService;
import weblogic.jws.Policy;
@WebService
@Policy(uri = "policy:Wssp1.2-2007-Wss1.0-UsernameToken-Plain-X509-Basic256.xml")
public class CreditCheck {
@WebMethod
public CreditObject CheckOrder(Integer customerId,Integer orderId, double orderTotal ) {
CreditObject credit = new CreditObject();
if (orderTotal > 1000) {
credit.setApproved(false);
credit.reason = "order total too high";
} else credit.setApproved(true);
return credit;
client code
package nl.ordina.ws;
import java.security.cert.X509Certificate;
import java.util.ArrayList;
import java.util.List;
import javax.xml.rpc.Stub;
import nl.ordina.ws.client.CreditCheck;
import nl.ordina.ws.client.CreditCheckService;
import nl.ordina.ws.client.CreditCheckService_Impl;
import weblogic.security.SSL.TrustManager;
import weblogic.wsee.security.bst.ClientBSTCredentialProvider;
import weblogic.wsee.security.bst.StubPropertyBSTCredProv;
import weblogic.wsee.security.unt.ClientUNTCredentialProvider;
import weblogic.wsee.security.util.CertUtils;
import weblogic.xml.crypto.wss.WSSecurityContext;
import weblogic.xml.crypto.wss.provider.CredentialProvider;
public class TestWS {
public static void main(String[] args) {
try {
String username = "weblogic";
String password = "weblogic";
String clientKeyStore = "d:/wsclient.jks";
String clientKeyStorePass = "welcome";
String clientKeyAlias = "wsclient";
String clientKeyPass = "welcome";
String serverCertFile = "d:/weblogic.crt";
String wsdl = "http://localhost:7101/ws-ws_security-context-root/CreditCheckPort?wsdl";
CreditCheckService service = new CreditCheckService_Impl(wsdl);
CreditCheck port = service.getCreditCheckPort();
List credProviders = new ArrayList();
X509Certificate serverCert = (X509Certificate) CertUtils.getCertificate(serverCertFile);
CredentialProvider cp = new ClientUNTCredentialProvider(username, password);
credProviders.add(cp);
cp = new ClientBSTCredentialProvider(clientKeyStore,
clientKeyStorePass,
clientKeyAlias,
clientKeyPass,
"JKS",
serverCert);
credProviders.add(cp);
Stub stub = (Stub) port;
stub._setProperty(WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders);
stub._setProperty(StubPropertyBSTCredProv.SERVER_ENCRYPT_CERT,CertUtils.getCertificate(serverCertFile));
stub._setProperty(WSSecurityContext.TRUST_MANAGER,
new TrustManager(){
public boolean certificateCallback(X509Certificate[] chain, int validateErr){
return true;
CreditObject credit = port.checkOrder(10,10,1100);
System.out.println(credit.getReason());
// Add your own code here
} catch (Exception ex) {
ex.printStackTrace();
Here the certificates I generated and also added to wls
key
D:\oracle\Middleware\jdk160_05\bin\keytool -genkey -dname "CN=WSCLIENT, OU=ICT, O=Ordina, L=Nieuwegein, S=Utrecht, C=NL" -alias wsclient -keystore d:\wsclient.jks -storepass welcome -keypass welcome -keysize 1024
request
D:\oracle\Middleware\jdk160_05\bin\keytool -certreq -alias wsclient -dname "CN=WSCLIENT, OU=ICT, O=Ordina, L=Nieuwegein, S=Utrecht, C=NL" -file d:\wsclient.csr -keystore d:\wsclient.jks -storepass welcome -keypass welcome -keysize 1024
sign request
d:\tools\openssl\bin\openssl x509 -CA d:/projecten/certs/cacert.pem -CAkey d:/projecten/certs/cakey.pem -CAserial d:/projecten/certs/serial.txt -req -in d:\wsclient.csr -out d:\wsclient.crt -days 365
import CA
D:\oracle\Middleware\jdk160_05\bin\keytool -import -file d:/projecten/certs/cacert.pem -alias ca -keystore d:\wsclient.jks -storepass welcome -keypass welcome
import WSCLIENT
D:\oracle\Middleware\jdk160_05\bin\keytool -import -file d:\wsclient.crt -alias wsclient -keystore d:\wsclient.jks -storepass welcome -keypass welcome
import ca in wls
D:\oracle\Middleware\jdk160_05\bin\keytool -import -file d:/projecten/certs/cacert.pem -alias ca -keystore D:\oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase
D:\oracle\Middleware\jdk160_05\bin\keytool -import -file d:\wsclient.crt -alias wsclient -keystore D:\oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase
D:\oracle\Middleware\jdk160_05\bin\keytool -import -file d:\demoidentity.cer -alias demoidentity -keystore d:\wsclient.jks -storepass welcome

Hi,
You need to use two NICs for Reverse Proxy, one for Internet interface and one for internal interface. If you use only one NIC for Reverse Proxy, you may meet unknown issues.
Please check if you change the time-out time. Setting the time-out value to a value greater than 180 prevents the Lync Web App from experiencing disconnecting and reconnecting unexpectedly
Please double check the settings of Reverse Proxy with the help of the link below:
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
Also, the media workflow for mobile client need the support of Edge Server, so you also need to deploy the Edge Server in DMZ zone for Media function such as A/V call.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Security Issues: SSL on SOAP Adapter and Digital Signature in BPM

Hi there,
we're developing a R/3-XI-3rd Party Application scenario, where the XI/3rd Party communication is based on a webservice (SOAP adapter with SSL). Also, the messages in the XI/3rd Party communication must be digitally signed. I've got some questions on both subjects.
1. About the SSL. I've started to investigate what will be necessary to enable the HTTPS option under SOAP Adapter (it's not enabled now). If I'm not correct, all I need to do is:
- check whether the SAP Java Crypto Lib is installed in the Web AS;
- generate the certificate request in the Visual Administrator and, after acquiring the certificate, store it with the KeyStorage option.
Is that right?
I'm considering that I won't need to use SSL in the ABAP Web AS, only the J2EE Java Engine (since the SOAP Adapter is based on J2EE).
2. About the digital signature. As a first solution, we had decided on accessing a webservice based on another machine running a signature application. We'd send the unsigned XML and receive a signed XML. But since that needed to be done into the BPM, I thought that using a piece of Java code in a mapping would suit it better.
But to be able to use the hashing/encrypting/encoding algorithms, which library needs to be installed? Is it the same SAP Java Crypto Lib that was installed for the SSL enabling?
Thanks in advance!

Hello Henrique,
1. You're right. For detailed instructions please have a look at the online help: http://help.sap.com/nw04 - Security - Network and Transport Layer Security - Transport Layer Security on the SAP J2EE Engine
2. The SOAP adapter supports security profiles. Please have a look at the online docu http://help.sap.com/nw04 -Process Integration - SAP Exchange Infrastructure - Runtime - Connectivty - Adapters - SOPA Adapter - Configuring the Sender SOAP adapter and from the link under Security Parameters to the Sender Agreement. You'll find some additional information in the following document: http://service.sap.com/~sapdownload/011000358700002767992005E/HowToMLSXI30_02_final.pdf
Rgds.,
Andreas

BPM: maintain process order in BPM

Hi folks,
If you have multiple messages coming in a BPM, how do you maintain the order of processing?
Thanks,
Aarhyn

>
Aarhyn wrote:
> If you have multiple messages coming in a BPM, how do you maintain the order of processing?
>
Check this help section on how to manage the inbound processing in case of a BPM:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/1a97be109921a0e10000000a1553f6/content.htm
Regards,
Abhishek.

Process signature in BPM

Similar Messages

Maybe you are looking for