Process single chq for Multiple Vendor Invoice and other Non-Vendor GL
Hello Experts,
Scenrio :
In most of the cases, Vendors of our client have the same Banks as that of our client. our client provides facilty to thier Vendors by depositing chqs in thier account upon due date.
Procedure :
I want to process a manual transaction (with a single chq for intra-bank transfer). the total amt on chq would be the total of selection of several invoices & some other payable GLs.
Query :
which T-Code should i use & how do i proceed.
Hi Hussein Merchant ,
For your requirement you have to do single payment at F-53.There you need to select Other account check box at open item selection.Give the all open item vendor codes and get a cleared document number.
Go to FCH5 and assign manual single check here
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya
Similar Messages
-
Single Receipt for multiple Customers
We have a scenatio where there a multiple customer codes for different locations of the same customer. Say customer codes A B and C. A single receipt is received from the central processing location i.e. A and it contains invoices raised on all locations A B and C
Entry cannot be passed through F-28 to enter and clear the open invoices.
Is there a solution to this situation
regardsHi,
Through F-28 you can do multiple customer receipts with single receipt. In the first screen of F-28, you have to give total amount received in the amount column then give first customer code then go to process open items select the open item, then choose process open items again it will ask for new customer code then give second customer code and process open items select open items in second customer this way you can process single receipt for multiple customers.
Regards
Sarma BH -
Reg:Single Check for Multiple Vendors
Hi Experts,
I want to Issue a Single check for all vendor open items...
For this is I created one Group Key and assigned in the vendor master record, but while doing the payment separate check issuing for each vendor,
any ideaHi,
Can you check the below thread of urs.
[Reg:Single Check for Multiple Vendors]
In addition to the above, please make sure that in OBVU, the check box separate payment for each ref is deselected for your questioned comapny code.
You would have continued your earlier thread instead, rather than a new thread.
Thanks,
Srinu -
Single Excise invoice J1IIN or J1IJ for multiple Comercial Invoice or Deli
Hi Friends,
Can we do Single Excise invoice J1IIN or J1IJ for multiple Comercial Invoice or Delivery.
Points will be awarded
Regards,
ashuJ1iiN is for Excise invoice posting for Factory sales.
whereas, J1iN is for excise invoice posting for Delivery from Depot.
In my opinion, multiple posting of Billing doc is not possible.
Whereas, you can view billing due list for excise posting by using tcode J1iDUEList
Thanks,
JP. -
Hi all,
can u plz send me the mandatory fields(along with discription) for creation of FB60(vendor invoice),and FK01(cost center).
thank u,
Srinivas Reddy.The FK01 is the transaction used to create a Vendor.
The mandatory fields are:
a. NAME1: For Name
b. SORT1: For CUIT number.
c. SORT2: For alternative CUIT number.
d. CITY1: For city.
e. STCD1: Tax Number.
f. Others depending the case.
For FB60 (Vendor invoice) the mandatory fields are:
a. ACCNT: Number of Vendor Account.
b. BLDAT: Date.
c. XBLNR: Reference Number.
d. WRBTR: Invoice Amount.
e. HKONT: G/L Account Number.
f. WRBTR: Invoice Amount. The same as d but in the item.
g.MWSKZ: Tax Type. Depending the case.
h. KOSTL: Cost Center. Depending the case but is highly probable that the field were mandatory.
i. Others. Depending the case.
I have given to you the most probably fields that are mandatory for those transactions.
Your Sincerely
Leonardo Lopez
FI Consultant -
BAPI for Vendor Invoice and Credit memo - FB60
Hi
Iam using BAPI_ACC_DOCUMENT_POST for creating Vendor invoice and Credit memo ..Could you please tell me which fields to be populated on the below structures?
what will be the value i should use for BAPIACHE09-BUS_ACT...RFBU or RMRP?
ACCOUNTPAYABLE ( BAPIACAP09)
ACCOUNTGL(BAPIACGL09)
CURRENCYAMOUNT( BAPIACCR09)
Only the fields which needs to be populated on these structures when we do FB60 invoice and credit memo using bapi..
Thanks in advance
GoviHi,
Populate in Document_header : (User name, Comp code, Doc DAte, Doc type, Ref Doc No)
Account GL : ItemNo_Acc, GL Accuont, REf Key1, Refkey2, Refkey3, Account Type = 'A', Doc Type, Comp code
Account_number, Cost_center
Account Payable: ItemNo_Acc, Vendor_No, Rey_key1, Ref_key2, Ref_key3
Currency Amount: Item No_Acc = 2, 1
Curr = USD, USD
Amt_Doccur
At last use commit bapi.
Thanks,
Krishna -
Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Please help!!I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
$uri = new-object System.Uri("http://url/")
$sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
$sts.Update();
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Single-signon for multiple sites or sub sites
Does anyone know of some good articles/publications or suggestions for
implementing a single signon for multiple very secure internet sites in
weblogic type environments.
For example, bank1 has a internet site and bank 2 has an internet site.
Bank 2 has some cool features they want to offer bank1's customers. They
agree but, bank1 wants to present bank2 as a tab or part of bank1 site.
IN order to do this there are lots of fun things, but the things Im
interested in are how to authenticate between them and handle timeouts.
timeouts seem particularly tricky in that if I dont hit a page on bank2
for a while, it could time out its session for the guy on bank1. Also if
im in the bank2 section of the site, then bank1 could time me out as
well.
any ideas let me know.
thanks
JoelI've been informed ;-) that a pure Java solution is also available from
Entegrity. So here are a couple of URLs for you to research
anagrammatically:
http://www.netegrity.com
http://www.entegrity.com
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
Tangosol: How Weblogic applications are customized
"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]...
Netegrity?
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
Tangosol: How Weblogic applications are customized
"Tim Funk" <[email protected]> wrote in message
news:[email protected]...
This is long winded and I tried to have this make sense, if it doesn't
just mark this as read ...
I am running into the same issue. Out of need, different applications
need to be hosted on different boxes/JVM's/web applications. I am
experimenting with a customer single sign on process which is
independent of Java but lends itself nicely to it. Here is my thoughts:
1) All applications need to run under the same domain. For example:
foo.redrose.net, www.redrose.net, bar.redrose.net, app1.redrose.net
all reside under redose.net.
2) You have a database table (secure) that contains the following:
user id, password, session id, last access time.
3) This database table contains all of the valid sessions across the
domain (in this exmaple .redrose.net)
4) There is a daemon running which runs every ?? seconds that deletes
any records older than ?? seconds/(or minutes/hours) in the
database.
5) There exist a cookie which is set to the domain level that contains
the session id.
6) The session id provides a way to obtain the id and password for the
user to authenticate to the container. For example in WL5.1SP8 there
exists: weblogic.servlet.security.ServletAuthentication.weak(...) to
authenticate to your container. By using this you will get the
capability of setting up your roles and ACLS etc in you web.xml and
weblogic.xml to handle authorization.
7) All requests to any applications participating in this philosophy
must do the following for EVERY request (or appropriate):
Even if you are logged authenticated to the container and authorized,
you may have timed out or logged out of another application. So the
database table must be checked to see if the session id exists. At the
same time, you must also update the last access time to prevent timeout.
8) If the user tries to access a different application which he has not
authenticated to yet - the user will be forwarded to a servlet whichwill:
a) Look for the cookie at the domain level
b) If the cookie is found - get the UID and PWD from database
b2) Present login form if cookie is invalid/not exists
c) Authenticate to container
d) Forward back to original page and let the container handle
authorization since you have already authenticated.
I use have encapsulated the database activity into 3 stored functions:
1) isValidSession(session_id) - Returns null or the user id and pwd
concatentated which will need split apart if needed
2) makeSession(user_id, password) - Returns a new unique session id and
creates the appropriate record
3) cleanUpSessions() - Arguements not yet determined. This will delete
any records older than a certain time. I would like to have the proc
know what to delete without being given a parameter but time to the
second level can be tricky for some DBMS's.
There is a concern of storing the user id and password in the database
but this can be eliminated with a good design to restrict access to the
database table and using encrypted connections.
Hope this helps. Hopefully - a similar philosphy will be adopted by an
application container so I may not have to worry about this and I can go
back programming business functionality.
-Tim
Joel Nylund wrote:
Does anyone know of some good articles/publications or suggestions for
implementing a single signon for multiple very secure internet sites
in
weblogic type environments.
For example, bank1 has a internet site and bank 2 has an internetsite.
Bank 2 has some cool features they want to offer bank1's customers.They
agree but, bank1 wants to present bank2 as a tab or part of bank1site.
IN order to do this there are lots of fun things, but the things Im
interested in are how to authenticate between them and handletimeouts.
>>>
timeouts seem particularly tricky in that if I dont hit a page onbank2
for a while, it could time out its session for the guy on bank1. Alsoif
im in the bank2 section of the site, then bank1 could time me out as
well.
any ideas let me know.
thanks
Joel -
Single bill for multiple connections
Dear All,
Is it possible to print single bill for multiple connections ? This is my requirement Customer X having 2 connections for Water and 2 connections for Electricity.But we need to bill Electricity and water in a different bill ,but 2 connections for water and 2 connections for electricity should be billed in a single bill.We have created a separate contract accounts for 4 connections.
Pls guide...
Best Regards
JayHi,
I am not sure, if i completely understand your requirement.
But as per my understanding, you have 4 installations, ( 2 for Water and 2 for Electricity) and you want to have a single invoice created for Electircity and water.
So, its better to create a single contract account with multiple contracts.
If you are creating multiple contract accounts, then it would create multiple invoices (one per contract account - regular scenario). So, please have a multiple contracts with single CA.
Also, if you want to invoice all the contracts together, please find the option on contract for joint invoicing. (option 1).
And, in case you want to bill two connections of electricity as one entity and two of water as one, so in this case, have two contract accounts one for Electricity and one as a part of water. And assign all the electricity contract to one CA and rest of water to another CA.
Invoices are always created at contract account level and the billing documents are created at contract level.
Hope this helps !!
Regards,
Rajesh Popat -
Single spool for multiple smartforms
Hi,
I am using Function modules SSF_open and ssf_close for creating single spool for multiple smartforms but when i try to run the program in background then the job is getting cancelled...........and if i run the program in foreground then the program is running fine giving single spool for multiple forms........
so the problem is that job should run in background if i run it in background instead job is getting cancelled.
please tell me the solution how can i get the single spool for and multiple smartforms as well as the job should run if i am doing so.Moved to the correct forum
-
Regarding Diff between KR and KA, Vendor Invoice and vendor Document, SM35
Hi Guys
Can I know the major difference between Vendor Invoice and Vendor Document, KR and KA
Can I know how to create and batch job for the documents to be reversed every month starting which created in FBS1 screen to be reversed every month first week or first day of every month
Steps to set up the Batch job in SM 35 dont know exactly the tcode .
Please assist me how to reverse the documents posted to be setup to reverse on the 1st of every month
Regards
Ravi. AadhiHi,
FBS1 is for posting provision entry for the current month and that will be reversed in the next month.
Yes you can schedule F.81 in background with the help of Job scheduler for this you need to take help from ABAper.
From Functional point of view you need to Create Variant for F.81 SAP program in SE38 and the same program & Variant can be used during execution. This is to be on the same date which you have entered at the time of FBS1.
Hope this helps!!!
Br,Vivek -
Single form for secure zone registration and web app submission?
Hi
Is it possible to setup a form where a user can simultaneously register for a secure zone and submit a web app entry? The knowledge base / tutorials describe a two step process (web form for secure zone registration and web app input form for web app submission), but I would like users to be able to do both with a single form
Thanks in advance for any suggestions
mlsIn order to have a customer create a web app item they must be logged into the secure zone already. I've seen some instructions on how to let users submit web app items outside a secure zone but that requires creating a dummy anonymous user and logging them into the secure zone via javascript. You could use this method and once it's submitted you'll have to manually attach the web app item to the correct user in the BC Admin. That might not work for you but you can read more about that at http://forums.adobe.com/docs/DOC-1784
You can't use the above solution with the current user's username and password because those tags are only available when the user is logged into a secure zone already. If your signup form needs to be filled out first, the user isn't logged in.
Your best bet is to have the public signup form redirect the user after submission to an "Add item" form you have created. Maks sure that form is in a secure zone so when they add the item it is attached to their account.
If you don't want to redirect them to a secure zone and want it more seamless you could try to use some javascript/ajax to submit the form via javascript and after the form is submitted, use the javascript code in the above to log them in (be careful to use the https://yoursite.worldsecuresystems.com url if you are passing username and password info gathered from your form to log them in via javascript/ajax). Once they are logged in via the javascript you can use more ajax to fetch a page's HTML that resides in a secure zone. This HTML returned from the javascript can be your "add web app item" form and since they were logged in via javascript (securely, right?) this HTML should contain the right information. Insert this returned HTML into your form container that held the original signup form and they can continue to add a web app item without having to log in.
This is theory and might work but you'll have to start experimenting with it via javascript. I haven't actually tried to do this so hopefully some other community members who might have tried this can weigh in here as well.
Good luck! -
Single cycle set , multiple cycle sets and counters
Hi every one,
i wanan know the use of single cycle set, multiple cycle set and counters. What kind of functionalilites can be covered by these fields specially in performance based planning and schedulling. Kindly give me some documentation on all three or some good example which can explain the scnerio clearly. Any help would be of great imprortance for me.
Regards
Abhishek SinhaHi,
This may help you
http://help.sap.com/saphelp_46C/helpdata/EN/b0/df293581dc1f79e10000009b38f889/frameset.htm
Regds
Vinit -
Single Spool for multiple smart forms
Hi,
I am doing Cheque Printing My multiple smart form in single spool
I Created Single spool for multiple smartforms and i can able to see all the smart forms in single spool
While I am printing smart form from spool it is taking only first page.
Any inputs how to slove this.
Regards
Azeez
Edited by: Rasheed salman on Feb 3, 2010 7:41 AMHi,
You can call Open Spool and Close Spool function modules. Between these two fm you can call your smartforms. Just have a look the procedure below.
Call function OPEN_SPOOL.
Call function SM1
Call function SM2
Call function SM3
Call function CLOSE_SPOOL.
Hope this will resolve your issue.
Thanks,
Abhijit -
Single login for multiple domains
Can anyone point out a blog or post of a single login for
multiple domains? For example, let's say I own asite.com and
bsite.com.
I want a user who logins to asite.com to also be logged into
bsite.com if they visit that site. BSite.com is clearly a microsite
of asite.com but we'd like to continue to use that domain if the
visitor is on that site instead of redirecting them to keep login
credentials
ThanksIf you're using cookie based login system, I'd imagine you
could set a cookie to be valid for both of your sites.
<cfcookie name="myAuthcookie" value="myAuthValue"
domain=".asite.com;.bsite.com">
That way both asite.com and bsite.com can read your cookie.
Note the notation; always include the preceeding dot in the domain
values. (two dots for top level domains, etc.)
Strangely CFCOOKIE documentation doesn't mention anything
about using semicolon separating multiple domains. It did in CF5
documentation, but not since.
Maybe you are looking for
-
Two WSUS server, both have information of imaged computers
Hi I have SCCM 2012 R2 and MDT 2013 and WSUS on one server. And other server with just WSUS for update installation in MDT Build and Capture. All deployments go via SCCM. 1. Is it normal behavior? After Capture, I imported image into SCCM and deploye
-
why my ipad 4 is always dying for 5minutes?? if its already died it has the symbol apple and black background for 5 minutes but why ?
-
Auxiliary filename conflicts with a file used by the target database
Hi, I am using RMAN backup to duplicate my prod database. My database is 10g on Linux. My RMAN script is like this connect auxiliary /; connect catalog rman/rman@catalog; connect target sys/sys@prod; sql "alter session set optimizer_mode=RULE"; run {
-
In ColdFusion Server for both versions 8 and 9, are the JRun 4 updates allready applied or do I need to run for example the JRun 4 Update 7?
-
HELP needed! - burning in list view
This issue is driving me crazy! I burn many Data CDs & DVDs backing up files. The preferred format is all to be in LIST VIEW. Prior to burning, I ensure all enclosing folders & files are in list view. After burning, the top level is in list view, but