Process step for Investment Management

Hi SAP Gurus
Our client is into BOT projects - Build, operate adn transfer projects.
Till the time of transfer the asset is the property of our client. So the client builds an assets, maintains & operates and transfers the rights only after certain years.
For this I am suggesting using Investment Management module but I am not very clear on the process steps right from creation to Investment order for project - build & for operation.
Request you to suggest me the process steps.
Thanks,
Srikanth

Hi,
For more information about Investment Management, click the below link.
http://help.sap.com/saphelp_47x200/helpdata/en/2a/f9f273493111d182b70000e829fbfe/frameset.htm
regards,
Venkatesan Anandan

Similar Messages

  • How to process Fisacl year change for Investment Management with Project?

    How to process Fisacl year change for Investment Management with Project as measure

    hi
    check this menu path
    Accounting  --> Investment Management  --> Programs  --> Periodic Processing  --> Fiscal Year Change

  • Object Types in User Status profile for Investment managment

    Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
    Regards
    Rama Shanker Sharma

    Dear Ram,
    User Status can be maintained in the system as foll
    Maintain the Status Profile first in OK02
    Status no       Status        Short text         Initial status flag    lowest    Highest
    10                  NBU            Not Budgeted             ^                10          20
    20                  BUD           Budgeted                                      10          20      
    in
    Status
    NBU
    maintain the required fields as required by your process requirement
    Material purchase order
    Material purchase requisition
    Partially release project
    Release etc
    and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
    Repeat the same logic for
    Status
    BUD
    I hope this solves your problem, if not please write in detail your requirement.
    Regards,
    Vikat Verlekar

  • Process steps for customer incoming payment w.r.to Billing.

    Hi all,
    Can some body help me in by providing the process steps for customer incoming payment w.r.to Billing.i want to know the process from open items to cleared item , if possible pl give table names also and thier data flow using tables.
    thanks

    Dear Sai,
    Use the transaction code F-28.Give the document date, Bank account, amount received, Value date, and the customer code. In case you know which are the document numbers against which you have received the payment, select the "Document numbers" in the "Additional selection" tab and then click on "Process open items".
    Fill the document numbers in the next field, press enter and then click on "Process open items". Select the open items, simulate and then save.
    In case you do not have the document numbers, then directly click "Process open items", select the line items and click "Document > Simulate" and then save.
    Assign points if useful.
    Regards
    Venkatesh

  • Exact process flow  for   Material management  (MM)  and  UI  Tcodes.

    Hi  Gurus,
    Could  any one tel me Exact process flow  for   Material management  (MM)  and  UI  Tcodes.
    ALL   BAPIs  for   MM  module.
    Thanks in Advance.

    hi,
    Check the threads:
    MM  flow
    MM-Process
    For tcodes:
    TCODES IN MM
    TCODES IN MM
    Hope it helps..
    Regards
    Priyanka.P

  • QM In-Process Inspection for Batch Managed Material

    Hi,
    I have a issue related to UD of In-Process inspection for batch managed material. The production process is discrete manufacting for a cold rolling mill. A production order can have mutiple coils as per the production amount. To track the individual coil , batch management has ben activated. We have both in-process as well as inspection after production here.
    For inspection after production we are fine as we are doing partial confirmation after every coil and have separate inspection lot having different batch number.
    But for in-process I can have only one inspection lot for the production order (created on release of the production order). I can do the result recording but while trying to do UD u2013 it is asking for a batch number as the material is batch managed. W/o entering the batch number system is not allowing me to do the UD.
    Is there any solution/work around of this problem.
    -Regards
    ashim

    Hi Ashim,
    you raised a very good question? i am helpless here to execute same scenario,
    but i disussed with my QM guy here, he said, once the material is batch managed then it has to ahve batch in UD.
    so i discussed ur case, which is very much valid for heavy ind like cement and all,
    so what i suggest, u create a dummy batch in the UD for in process (no inventory posting)
    and at confimation give ur usual batch (if system propose the dummy batch which u give in the UD for inprocess, try to change there--- i hope it should allow)
    i would really like to here answer from u for this.
    try to do as suggested, and let me know the results.
    REgards,
    Pravin mukkawar

  • Business content for Investment Management & Travel management

    Hi All,
    I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support  date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
    Cheers
    Anil

    Hello Anil,
    this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
    Best, Heike

  • Post Installation steps for Solution Manager 4.0

    Hi Experts,
    Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
    Thanks & Regards
    Sunil

    Hi
    In installtion guide you can find  the information you needed also check
    Visit for step by step details of Standard Configuration of Basic Settings
    www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
    &system administartion just drill out there you can find lot of simulator how to install and
    configure solution manager
    https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
    https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
    and for Maintenance optimizer setup
    https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
    https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
    Let me know if needed more information
    Regards
    Uday

  • An user guide for Investment Management (IM) ???

    Hi All,
    I'd like to get an user guide for Investment Management (IM).
    Could anyone help me?
    Thanks

    I hope it helps you.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/2a/f9fefd493111d182b70000e829fbfe/frameset.htm

  • SAP process steps for tool room

    What will be the SAP process steps for tool room.
    Moulds are manufactured and maintenance of moulds are being done in the tool room

    Hi,
    Assuming the moulds are available, you may follow the steps below:
    > Create mould as Equipment with PRT screen data
    > Create measuring point for this equipment.
    > Create counter based maintenance plans for preventive maintenance.
    > Use applicable user exit to update the measuring point, in association with PP product confirmation, where this mould is used in respective work center.
    > This will give the preventive maintenance schedule in accordance with usage.
    > For unplanned repairs, use notification/Maintenance order route to calculate the costs and to maintain history.
    > When life expires, deactivate and set 'deletion' flag' to the respective mould equipment master, so that it can not be used in production.
    > Detailed scenario should be mapped, based on the actual customer requirement.
    James Prabaharan

  • Process route for case management.

    How to configure the process route in case management. I want to determine the person a case should go to when the status is changed. The person who changes the status should be able to select or determine who the case goes to. when i try to do this this error comes out
    ERROR MESSAGE
    No description created for process route 000000000021. Activity area SCMG                                                                               
    Message no. SRM_WF_PATH02

    Hello,
    First step is to go to the event trace (SWEL - turn on with SWELS) and see if an event is being created.
    regards
    Rick Bakker
    hanabi technology

  • Authorization for Investment Management program positions by Plant Code

    Hello!
    I am looking for a way to restrict data on Investment Management reports (program positions) by plant code. I found the following auth objects, but none for plant code:
    Company code (A_IMPR_BUK)
    Business area (A_IMPR_GSB)
    Controlling area (A_IMPR_KOK)
    Profit center (A_IMPR_PRC)
    Persons responsible (A_IMPR_VER)
    Any advise?
    Cheers,
    Alex

    Refer BPGE, BPJA.
    Regards

  • Tables for Investment Management

    Dear All,
    We need to develop an ABAP report for Budget distribution in investment management in the format specified by the user. The client uses Investment management for budgets in Marketing budgets.
    I got tables IMTP, IMPR, IMPU for Investment program, position id etc.
    But I could not find the tables where the Budget amounts get stored when we distribute amounts in Tran.Code IM32.
    Please tell me the tables where Budget amount, Distributable, Distributed etc get stored when we post IM32.
    Reply me soon.
    Thank you very much in advance.
    Vishnu,
    VST-IT.

    Refer BPGE, BPJA.
    Regards

  • A SAP guide for Investment Management?

    Hi All,
    Could anyone show me where I can find a SAP guige (customizing and/or user) for the Investment Management (FI-IM)?
    Thanks
    Gandalf

    Hi,
    Go through the below link :
    CONFIG:
    http://sapdocs.info/sap/fico/sap-investment-management-configuration/
    HELP:
    http://help.sap.com/saphelp_46c/helpdata/EN/fd/45add69d6411d189b60000e829fbbd/frameset.html
    VVR

  • BW for Investment Management

    Hi all!
    Can anybody say about integration between BW and Investment Management?
    I have no information about this.

    Hi Dmitry,
    Please, refer to this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/4c/10193c66f5dc1ce10000000a11405a/frameset.htm
    Regards,
    Eli

Maybe you are looking for

  • 17" MBP Shipping in 1 to 2 days from CompUSA ?

    Can anyone confirm this? Is this a sign the 17" MBP are soon here? http://www.compusa.com/products/productinfo.asp?productcode=51764571&pfp=SEARCH   Windows XP  

  • Passing Internal Tables

    I have a function ZMYFUNCTION belonging to ZMYFUNCTIONGRP function group.  In the TOP include of the group I have the following type declared: TYPES: BEGIN OF bundle_struc,                   exidv  LIKE vekp-exidv,                   vhilm  LIKE vekp-

  • File-roller problem

    Whenever I try to download a file and use an application to open it (such as fileroller or Gnome PDF viewer it seems to open fine (though file roller doesn't extract correctly) but I get this error... Failed to contact configuration server; some poss

  • HT2499 why does my dvd player all of sudden say "supported disc not available" for dvds i have played in the past

    My dvd player has been displaying "support disc not available" for all dvd's that i put in that just weeks ago were playing fine. ive tried cleaning the player and that did nothing...dont know what to do

  • Patch Level B1

    Which is the last Patch Level for SAP B1 ? PL 39?