Process steps on releasing activity and importing in consolidation of cms

Hi All,
I have a question on consolidation in nwdi,I have develpment configurations trackname_dev and trackname_con. I imported trackname_dev and checked out(asked for activity ,so created the activity) and modified an ess DC and then checked in to DTR and activated so it got activated without errors, so the code from inactive workspace is pushed and merged to active workspace its fine till now., when i released the activity its in cms consolidation queue when i hit import the activity in queue what is happening now.
How the changes i made in trackname dev in active workspace of DTR are pushed to tracknamecon
so does it takes from trackname _dev in active workspace of DTR and pushes to inactive workspace of trackname _con andthen build in trackname _con workspace and activated so if again the activation passes the code goes to active workspace of DTR of trackname _cons from where assembly takes place.Am i right?
In simple words what is the process taking place when i hit release the activity and then hitting the import in consolidation queue of CMS?
I am asking this because my activation has no errors and Modified DC is good in green in trackname_D buildspace but when i hit import in the consolidation tab in cms after import the same DC in trackname_C its red as broken dc as it has compilation errors.
Please give your valuable suggestions.
Thanks,
PKV.

Hi,
I guess the problem is because of version/patch you maintained in DEV system is different when compared to Cons/Test system.
First step you need to do is just open the console of DEV & CONS check the SC versions and patch levels.
I think this might definetly resolve your issue.
Regards,
Anil.

Similar Messages

Why does the process Report Crash stay active and take up over 100% of the CPU?

In addition to window-server taking an inordinate amount of CPU, I am seeing that the process "Report Crash" is sucking up 102% of the CPU and occasionally goes down to 90%. ***? What IS Apple doing these days? Their products are getting worse and worse!

Select that process and kill it in Activity Monitor, see if it comes back.

Linking a custom object to an activity and importing records

I'm trying to create a link between an activity record and a custom object record. In essence, we will have 1 activity record with multiple associated custom object records linked to it. How do I import these multiple records to a specific activity record? I thought I could use the Activity: External Unique ID field but that field does not appear on the list of values available for importing to a custom object. Anyone have any ideas how to do this?

Ken, at this time the import wizard does not support this type of functionality. However, this could be done using web services.

CFolders - actual process steps for storing, sharing and authorizing

I am PP consultant and know nothing about cFolders and even i don't have access to cFolders server as well.
I am in one project, where i need to assess the cFolders functionalities, how client can utilize that tool as per client requirement.
Requesting your help in finding some of the information as given below.
1. Process followed to store and share engineering data such as CAD drawings (2D & 3D) from SAP PLM/DMS in cFolders (Need step by step screen shots)
2. Process followed to store and share non - engineering data such as requirements docs from SAP ERP/DMS in cFolders (Need step by step screen shots)
3. Providing access to suppliers (If we provide access to one user, can we define that it will expire after some period of time. I mean, authorization is provided from date - To date basis)
4. If you have any real time case study on Collboration with suppliers using cFolders
5. What will be the process for point 1 & 2 , if we use other PLM software (not SAP PLM) and utilize cFolder colloboration. What are the integration points to be considered in this case?
SAP version ECC 6.0
Cprojects 4.5
I need your help to keep my job alive in this market condition. I hope, you understand my situation . Please send docs to the specified id in profile.
Thanks a lot .
Satish

Hi,
I have few points for you.
Requesting your help in finding some of the information as given below.
1. Process followed to store and share engineering data such as CAD drawings (2D & 3D) from SAP PLM/DMS in cFolders (Need step by step screen shots)
I think you must be clear on what do you want to do?
SAP PLM/DMS use itself to store and share information with large users of the system by managing changes effectively. So no doubt about this functionality. According to user authentication the access is given to the user of the system either for PLM/DMS. Whether he is a supplier or customer.
2. Process followed to store and share non - engineering data such as requirements docs from SAP ERP/DMS in cFolders (Need step by step screen shots)
The above answer is applicable for this point also.
3. Providing access to suppliers (If we provide access to one user, can we define that it will expire after some period of time. I mean, authorization is provided from date - To date basis)
This is possible for all the users. Apart from that you can control acess for each document also.
4. If you have any real time case study on Collboration with suppliers using cFolders
Collaboration is the term used by all the industies like Automobile, Aerospace, Heavy engineering and many more. You can get examples from these industries. But i have not worked in this scenario. The reason being many OEM's in INDIA are not willing to share their data with Tier I suppliers.
5. What will be the process for point 1 & 2 , if we use other PLM software (not SAP PLM) and utilize cFolder colloboration. What are the integration points to be considered in this case?
This you have to study the requirements properly and take a decision ont he same according to the clients requirement.
Let me know if you are looking for more info
Regards
Suresh. J

How can we make export and import cube?

Somebody know´s the steps to make export and import in essbase 9.3.1?
what steps can I follow?

http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/esb_dbag.pdf

Import server Process consuming maximum time at Parsing and Importing steps

We are using Import server to Import files and most of the time looks like is spent on Impoting and Parsing, the whole load took little more than an hour and these two steps (see the log below) took almost 50 mins.
1543 2008/09/29 17:23:07.041 [MDS=usil0d32 Repos=ZCustomer11_Q ClientSystem=R3_ERP Port=IMPORT_MAIN]: xImporter: Thread started.
772 2008/09/29 18:12:20.231 [MDS=usil0d32 Repos=ZCustomer11_Q ClientSystem=R3_ERP Port=IMPORT_MAIN]: xSaxParser: Thread finished; Start -> End: 2612.191168000 seconds.
So I wonder how can we reduce the time taken for these two steps?
Same thing on Import Manager takes 10 mins max to open up and I assume Import manager opening up an XML is equivalent to Importer & Parser thread of Import server ?

It is Queued parallel Processing, you will not see a true parallel processing here, just like a pipelined CPU architecture.
Say Chunk 1 is at stage 1 preparing import records
Then Nothing else happens parallelly
Now is Chunk 1 moved to stage 2 Filter/Merge
Then Chunk 2 can move to stage 1 preparing import records
Now Chunk 1 moves to stage 3 MDS
Then Chunk 2 moves to stage 2 Filter/Merge
And Chunk 3 moves to stage 1 preparing import records
so on ......and so forth......
So if you prepare a Gantt chart with all these tasks in swim lanes then over a period of time you will observe that actually 'n' number of tasks will be running on various chunks and this 'n' is the what you set in No.of Chunks parameter.
try observing, when the stage 1 task started on Chunk 2 , see if it kinda overlaps stage 2 of chunk 1. Try posting all the logs , very interesting observation !
Size of Chunk is like preparing the packet, in any communication protocol, the more records you have in chunk , the less overhead/record but more wait time. The less the no.of records you have in your chunk the more the overhead/record but less the wait time. So yeah this can be tweaked according to your memory.
-Sudhir.

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

Process for Trading and Imports in CIN

Dear Friends,
The main business of our client is manufacturing and selling. For that they have a separate excise license. Along with that they do some trading activity of imported goods and for that they have different license. While imports there is a portion of Customs duty which is creditable and non creditable. Recoverable portion of customs duty is passed to the customer.
To map this in SAP we are proposing a dummy plant with different registration number as a Depot. which can directly procure the imported goods and sell with the additional recoverable duty to the customer with other taxes like Education cess, H & S Education cess and VAT.
Now I have following questions
1)     Whether this set up is OK
2)     Whether this new plant can procure imported materials directly and sell to the final customer with excise transactions?
3)     If yes, whether this will update RG23 D register correctly?
4)     If no, what process need to be set up for this in SAP? (e.g stock transfer from main plant to the dummy plant i.e. do we need to take the imported goods stock in the manufacturing plant, Transfer the same to the Dummy plant with all Excise implications and then sell the goods from Depot?)
5)     With this will the RG23D register be updated during Sales?
Can anyone please guide me so as to how to map this in SAP with RG23D register updation.
Regards,
Harsh

Hey there Ashish,
   There are a couple of things to know about this:
- AFAIK - this feature isn't available in Project Online
- For on-premise Project Server 2013 you need to go to Central Administration->General APplication Settings->Manage PWA->Operational Policies->Alerts and Reminders and switch it on there. If you can't see the setting make sure you
have already configured the outgoing SMTP sever settings for your installation.
Cheers,
   James.
James Boman BSc. MCP:EAD -

Steps to export and import oracle 10g databse from AIX to AIX and LINUX

Hi,
I need the steps to export the oracle 10g database from AIX server to AIX server and LINUX server.
Please give me all the steps as this is my first exort an import activity.
thanks,

For 10g there exist two ways to do so.
1) Regular exp/imp.
2) Data pump expdp/impdp.
As this is your first export and import activity, relevant concept understanding is mandatory for you.
Documentation Link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm
Read the chapters 1,2,3 (Data pump expdp/impdp) and 19 (regular exp/imp). Good luck.

Error in 'eMail Response - Process Message' --- Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(

Hi,
When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
I increased the log level to 5 and got the below message in log file
ObjMgrBusServiceLog InvokeMethod 4 0000000251b51f04:0 2013-06-10 01:30:12 Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
ObjMgrBusServiceLog Error 1 0000000251b51f04:0 2013-06-10 01:30:12 (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
Can any body help me out in this regard.
Thanks in advance..
Jagadeesh

Hi Naresh,
yes, I am using the delete polling strategy. Here is the .jca file:
<adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
<endpoint-activation portType="Pozadavky_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="Pozadavky.Pozadavky"/>
<property name="QueryName" value="PozadavkySelect"/>
<property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
<property name="PollingStrategy" value="DeletePollingStrategy"/>
<property name="PollingInterval" value="120"/>
<property name="MaxRaiseSize" value="1"/>
<property name="MaxTransactionSize" value="10"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>

Export and Import of mappings/process flows etc

Hi,
We have a single repository with multiple projects for DEV/UAT and PROD of the same logical project. This is a nightmare for controlling releases to PROD and in fact we have a corrupt repository as a result I suspect. I plan to split the repository into 3 separate databases so that we have a design repos for DEV/UAT and PROD. Controlling code migrations between these I plan to use the metadata export and subsequent import into UAT and then PROD once tested. I have used this successfully before on a project but am worried about inherent bugs with metadata export/imports (been bitten before with Oracle Portal). So can anyone advise what pitfalls there may be with this approach, and in particular if anyone has experienced loss of metadata between export and import. We have a complex warehouse with hundreds of mappings, process flows, sqlldr flatfile loads etc. I have experienced process flow imports that seem to lose their links to the mappings they encapsulate.
Thanks for any comments,
Brandon

This should do the trick for you as it looks for "PARALLEL" therefore it only removes the APPEND PARALLEL Hint and leaves other Hints as is....
#set current location
set path "C:/TMP"
# Project parameters
set root "/MY_PROJECT"
set one_Module "MY_MODULE"
set object "MAPPINGS"
set path "C:/TMP
# OMBPLUS and tcl related parameters
set action "remove_parallel"
set datetime [clock format [clock seconds] -format %Y%m%d_%H%M%S]
set timestamp [clock format [clock seconds] -format %Y%m%d-%H:%M:%S]
set ext ".log"
set sep "_"
set ombplus "OMBplus"
set omblogname $path/$one_Module$sep$object$sep$datetime$sep$ombplus$ext
set OMBLOG $omblogname
set logname $path/$one_Module$sep$object$sep$datetime$ext
set log_file [open $logname w]
set word "PARALLEL"
set i 0
#Connect to OWB Repository
OMBCONNECT .... your connect tring
#Ignores errors that occur in any command that is part of a script and moves to the next command in the script.
set OMBCONTINUE_ON_ERROR ON
OMBCC "'$root/$one_Module'";
#Searching Mappings for Parallel in source View operators
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
foreach mapName [OMBLIST MAPPINGS] {
foreach opName [OMBRETRIEVE MAPPING '$mapName' GET TABLE OPERATORS] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT)] {
if { [ regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET DIMENSION OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET CUBE OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET VIEW OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
if { $i == 0 } {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
     } else {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
close $log_file;
Enjoy!
Michel

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

Activation and release of DC Deletion causing DTR Conflicts

Hello Everyone,
I will be thankful if anyone can help.
We recently released a bunch of activities (for the first time in this track) and imported into CONS. Most of the activites were normal development work but a few activities were Deletion of DCs which got relased along with the rest. Import into CONS went through but with Integration Conflicts indications in the log. Assembly is failing because of the same (Integration Conflicts involving the deleted DC).
What would be the best way to resolve this? Conflits are in dev/active, cons/inactive and cons/active branches. Closed activity view is showing entries under dev/active branch as 'Closed Activity, intergated from another workspace'.
In the Integration Conflict view, the Resolve Conflict menu option has 'Merge', 'Accept Active' and 'Accept Colliding' options. Not sure which to select since conflicts are because of a deleted DC and does not exist anywhere in DTR.
Thanks very much.

I see...
No, I don't think so. It was all straightforward use of NWDI in the preliminary stage of track usage. The only thing that I can tell is that the deletion of the DC was done in two different activities. The deletion of the _comp folder (hierarchical deletion activity) was done first and the deletion of .dcdef from the SCs folder was done in another activity and activated at different times in respective order. They were released at the same time though.
Right now, the activity is not showing up in the transport view. It is showing up under the Closed Activity view only. The Intgration Conflict view is now showing conflicts in cons/active and cons/inactive branch only. Entries for dev/inactive are gone.
One more thing... the conflicts were resolved from the DTR perpective using another client (not the client that gets created with the import of the Development Configuration (sorry, don't know its techincal term). The context menu options for resoliving in this client were greyed out. I am not an expert user of NWDI so I am not quite clear on the difference between the two types of dtr clients.)
I had also tried using the dtrshell tool but got the error: "FAILED:Discard is not allowed becasue the workspace is not modifiable" - I suppose because I was trying to resolve it in the dev/active branch - which can't be done when using the dtr client
that gets created by importing the Development Configuration?? I don't know. I am not clear on how things work here..
Any ideas?
Thanks for you input.
Message was edited by:
rema

Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan

Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan

The easiest way is to connect the G5 and your new iMac together via Firewire. Then you can use what is called "Target Disk Mode" which basically makes the G5 look like an external hard drive to your iMac. The potential gotcha is if your new iMac does not have a Firewire port. In that case, you need to get the Apple Thunderbolt-Firewire adapter in order to connect the two machines (as far as I know, all G5's had one or more Firewire ports). I have done this many times, it's easy and works perfectly.
Alternatively, you could connect both Macs to the same network and log into the G5 from your iMac. This involves going into System Preferences > Sharing on the G5 and turning on File Sharing and then logging in from your iMac to the G5 as if it were a server. (Logging in through the Finder or via Go > Connect to Server). This also works fine but it's a little more involved than using Target Disk Mode. I do this all the time and it too works fine.
Either way, once the two Macs are connected, you will use the Finder on your iMac to copy files/folders from your G5 the same as you would from any external hard drive. Regarding iTunes, you could just copy your entire iTunes library over to your iMac being careful to put it in the same relative folder location: /users/yourusername/Music/iTunes This method will preserve your playlists and album art. Alternatively you could go into iTunes and do Add to Library but I'm not completely sure doing it that way will bring over your album art and it certainly won't bring over your playlists.
I see no reason to use a separate external hard drive. It will just double the time it takes to transfer your files because you would first have to copy everything to the hard drive, then in a second step copy everything from the hard drive to your iMac.
Note: In all cases there is the possibility that you may need to change file & folder permissions on the things you copy over so you can access (read & write) to these folders & files once copied to your new iMac. This is not a difficult process.

Urgnt Correction: transport release and import

Hi Team,
I have created two transport requests (one customizing req and one work bench req) in ECC Dev thro Sol Man ChaRM process. I have triggered the action "Release transport Requests". In the pop-up, i have chossen only the work bench request to release. So only the work bench request got released. Now i have passed the correction to test environment. Now the team wants the customizing request also in test environment.
How to handle this scenarion in ChaRM?
Note: The requirement is, we need not to go back to "In-Development " status again to release the customizing req.
My suggestion is: The current status of the ticket is "To be Tested". Go to ECC DEV system manually release the customizing request. Extend the action "Pass Correction to Test" to visible in the status "To be Tested". Trigger this action at this status. I hope the customizing request also will be imported to test environment. Will it work? currently i do not have the system to test this. Any other better method is very much appreciated.
Any input will be very much appreciated.
Regards
PSK
Edited by: psk.psg on Sep 15, 2010 7:28 AM
Edited by: psk.psg on Sep 15, 2010 7:40 AM

Hi,
In Urgntcorrections when you do 'Pass correction to test' all released transports are imported in the QA system. In the process the system will be checking whether all the TRs under the correction document are released. If any one of the TR is not released (The customizing request as indicated in your post) then the status gets reset to 'In development' and will not move to 'To be tested'. Appropriate messages also will be issued like 'Not all Transport requests released'. Also if there are any empty TRs gets deleted when moved to 'To be Tested' status.
This is the standard behavior.
Considering this , in your case the Customizing request would have been an empty request. Otherwise the correction document would not have moved to 'To Be tested' status when pass correction to test was done. If you further want to create customizing transport request and perform the changes, the only option is to reset in Development and to create a new Transport request.
Apart from the above the project status switches for the CTS project/s should also be considered before deciding to create, release or import the TRs outside ChaRM/ correction document.
Please revert in case of any clarifications.
Regards,
Kathir

Process steps on releasing activity and importing in consolidation of cms

Similar Messages

Maybe you are looking for