Process times in recipe group

Hi,
How to specify different process times in for same operation in a recipe group based on the material.

Veesh,
This is applicable for all task list type like, like Routing, Rate Routing, Master Recipe, Referance Routing Inspection Plan, Maintenance Plan etc...
Regards,
Prasobh

Similar Messages

SSAS 2008 - How to get processing times per dimension / measure group?

Hi experts!
SSAS 2008. I am doing analysis and I'm trying to get information (from dmv or log) about processing times per dimension / measure group. Any ideas how to do that?
Thanks,

also in DMV there's no column recording the processing time, so we suggest you using SSAS AMO to programmatically get the state and last processed date time. Please see:
Analysis Management Objects (AMO)
Hi John,
Thanks for you info, As
Simon Suggested there is no DMV columns available.
You can use below link for more information.
Programming Administrative Tasks with AMO
Cube
partition attributes for last processed (timestamp and status)
Thanks
Suhas
Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
My Blog
Follow @SuhasKudekar

Purchase group Processing Time - Types,

Hi All,
I am looking into the different time taken for the purchase department to process their acitvities.
I could list a few times lke
1) PurchasING processing time ( T code - OMDT)
2) Pur Req to PO Conversion time (path : SPRO-IMG-MM-PURCHASING-PUR REQ-PROCESSING TIME)
Similarly I want your help in identifying if any more such times exists for Purchase dept in SAP.
Thanks,
Vengal Rao.

You have considered both the processing time defined for Purchasing. I believe there is no other processing time defined exclusively for Purchasing in SAP.

Unnecessary Purchasing Processing Time in scheduling agreement

According to its business logic, the scheduling agreement is a document that has already been released by purchasing department, and its scheduling lines, that have been created by MRP are valid for goods receipt without any need for additional purchasing processing time. However, MRP scheduling incorrectly takes purchasing processing time into account (as defined in the IMG in plant parameters for external procurement - TCODE OPPQ) when calculating planned availability date. Please advise how to correct this issue.
Best Regards,
Itzik Eshed

This can be customized in
SAP Customizing Implementation Guide
-> Production
--> Material Requirements Planning
---> Planning
> Procurement Proposals
> Define External Procurement
Here you can select the indicator "Scheduling according to purchasing info record or agreement" either at plant or MRP group level.

How to reduce process time in report

Hi all..
Is there any technique to reduce process time in report on programmer side??
Plz help me...

Hi
check this and ensure that your code is as per the stds
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Regards
Anji

Processing a Two-Step Group in parts

Dear all,
I am processing my Two step group with LT0e and would like to process it partially.
Is there a way to do that?
Some background: When Picking from one of the Storage Types I want to use a Return Storage Type. Since this applies to one Outbound flow only, I have defined the Return Storage Type in my WM movement, NOT in the Pick Storage Type.
In 2-step customizing, I have omitted the movement type, and am entering the Movement Type myself in LT0e. Only thing, I want to be able to make some kind of selection here so with my Movement Type I process only those items from the One Storage Type I am focussing on.
To much info?
Again, thank you for your time.
Sandeep

In LT0E once you have selected your group and via subsequent function do the picking step(2step picking -> start picking), you should be able to make the lines which you dont require "Inactive". Then you have only those lines for which you want to do the picking with your required movement type.
Sandeepan

DMV Query -- all Catalogs and last processed time

Hi
I want to get a list of all catalogs & there last processed time, can you join the two DMV queries ?
SELECT * FROM $System.DBSCHEMA_CATALOGS
SELECT CUBE_NAME, LAST_DATA_UPDATE FROM $System.MDSCHEMA_CUBES

I just used the one query , I was trying to list out all the catalogs and illustrate in an excel pivot table, unfortunately the last processed date is not available in the DBSCHEMA_CATALOGS
c
In order to get the last processed date I would have to connect to each Catalog to retrieve the data making it useless for excel, as the Last processed date in only available in the $System.MDSCHEMA_CUBES
schema
SELECT CUBE_NAME, LAST_DATA_UPDATE FROM $System.MDSCHEMA_CUBES
Hi Carlo,
In your scenario, you list out the catalogs using the query below
SELECT * FROM $System.DBSCHEMA_CATALOGS
And get the last processed date using the query below.
SELECT CUBE_NAME, LAST_DATA_UPDATE FROM $System.MDSCHEMA_CUBES
Now what you want to know if we can use the Join function to join those two queries, right?
The query engine for DMVs is the Data Mining parser. The DMV query syntax is based on the SELECT (DMX) statement. Although DMV query syntax is based on a SQL SELECT statement, it does not support the full syntax of a SELECT statement. Notably, JOIN, GROUP
BY, LIKE, CAST, and CONVERT are not supported.
So your requirement cannot be achieve currently.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Any Dtrace script to log the username/UID, process time & process name

Dear all,
We're looking for "any tools to log the username/UID, process time & process name by individual user or group on the Solaris 10 OS level".
Do you have any Dtrace script ready to do it.
Please advise and comments.
Thanks,
William Lo

Why not use bsm/auditing..?
.7/M.

Improve cube process time

Hi,
I am processing cube with process full. its taking around 15 mins. I planned to improve this by adding indexes to the database. I used SQL Trace while processing & later used the result to the database tuning advisor to get recommendations. I got the
recommendations & i have included those changes to the Database & then processed the cube but there is no improvement. I even tried to get the expensive queries from the trace & run in SSMS with Query execution plan but I am not able to figure
out. Please help.
Thanks
sush

Hi susheel1347,
According to your description, you want to improve the cube processing. Right?
In Analysis Services, cube processing is performed in Analysis Services by executing Analysis Services-generated SQL statements against the underlying relational database. Here we have some advices on improving the cube processing:
Use integer keys if at all possible
Use query binding to optimize processing
Partition measure groups if you have a lot of data
Use ProcessData and ProcessIndex instead of ProcessFull
For more information, please refer to links below:
SQL Server Best Practices Article
Improving cube processing time
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

How to show the processing time taken for a BPEL process in BAM report.

Hi All,
I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
Regards
Jude.
Edited by: user600726 on Sep 30, 2008 1:30 AM

I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

How to calculate the Processing time for material based on its route ?

Hello experts,
I would like to calculate the Scheduled in-house production time based on route.
Actually this is done in the prod. route in tcode CA02. (via menu Extras => scheduling => schedule).
After getting the schedule table press the 'scheduling results' button I received the Processing time, Setup and teardown time,... Scheduled in-house production time.
So I'm looking for a function or any tool to use it in report.
thanks,
Eli

hi,
from routing screen,extras>scheduling>schedule(give a variant name)>scheduling results>update material master.this writes the info in the temp file.use tcode CA96 to update material master.this updates lot size dependent in house production time in work scheduling view of material master and deletes the lot size independent inhouse prod, time in MRP2 view.this tool gives more accurate results for your inhouse prod. time.
> Hello experts,
> I would like to calculate the Scheduled in-house
> production time based on route.
> Actually this is done in the prod. route in tcode
> CA02. (via menu Extras => scheduling => schedule).
> After getting the schedule table press the
> 'scheduling results' button I received the Processing
> time, Setup and teardown time,... Scheduled in-house
> production time.
> So I'm looking for a function or any tool to use it
> in report.
>
> thanks,
> Eli

Process Chain Load Processing Time Issue

Hi All,
One my process Chain is running daily , but after 2 hours of load it is showing Red in the Monitor screen, but after 5 hours load is successful.
Why Monitor screen is showing Red?
Is it possible to Extend the load processing time in the Infopackage level?
for e.g- if they set as 60 seconds -- go to Red
I want to change to 120 seconds -- go to Red.
If yes...where we can do it ...please let me know the steps...
Regards,
Nithi.

hey hi,
double click on the infopackage -> go to "scheduler" on the top left corner of the menu -> click "Timeout time" and you have the different option to change it.
hope this helps.

Processing time

Hi guys,
my question is this: I should to use the Processing time(WRPL-BZTEK) defined in customizing (SPRO>Materials Management>Purchasing>Purchase Requisition>Processing Time) in according to material type and not to side/division as such is now.
My purpose is to enlarge the processing time purchasing (or the planned delivery time) to modify the delivery date scheduled by MRP.
Is there a user-exit\Badi to implement this?Is necessary to modify the standard and if this is the one way how and where can I act?
Thanks in advance to all,bye
Maximilian

Hello, Riva
Processing Time: (configuration setup)
Here, you define the plant-specific purchasing department processing time.
And the processing time is the time required by the buyer to convert a requisition into a purchase order. And the processing time is taken into account during the scheduling process for externally procured materials within the framework of materials planning and control.
Actions
Suggestion:
Maintain the purchasing department processing time for each plant.
Processing time required by purchasing department.
-> Time that the purchasing department requires to convert a purchase requisition into a purchase order.
The usage of this configuration setup is
-> The purchasing department processing time is included in the computation of the delivery date.
Table Name: WRPL (i.e, for Replenishment: quantities per customer/material)
Field Name: SRP_BZTEK (i.e, for Processing time required by purchasing department)
Data element: BZTEK (i.e, data element for processing time for purchase department)
If you want to change the length of the field BZTEK (allowable characters is 2), you can do it, by modifying the TWO TABLES (i.e, T399D (Control parameters for MRP &
WRPL (Replenishment: quantities per customer/material)) using the Acess key (from SAP)
Importent Note: Before you modify it, you need to check with the PP &MM (since this requirement belongs to both modules)
Suggestion: As per my knowledge this (processing time for PR) configuration setup is for the plant (or plants).
Hope this will clarifies you,
Reward, if it helps,
Regards,
Srin.K

Scheduling Agreement - Priority for GR Processing Time

Dear Forum Members,
While defining Scheduling agreement for a material we can define the GR processing time and Planned Delivery time,likewise we
define in the material master also.
1.While running MRP which one has the higher priority?
2.After running MRP for the schedule line we are able to see only the delivery date,is there any setting to display the release date
or the start date based on the planned delivery time of the scheduling agreement?
Please suggest.
Regards
S Mangalraj

Hi Mangalraj,
For your question:
1.While running MRP which one has the higher priority?
-->GR processing time MRP-run will take it from material master data
-->Planned delivery time, you can use t-code OMI8 to define the higher priority of SA or material master data
2.After running MRP for the schedule line we are able to see only the delivery date,is there any setting to display the release date or the start date based on the planned delivery time of the scheduling agreement?
-->Yes, in standard SAP system, you only can see the delivery date after MRP-run! As to the release date or the starte date which take planned delivery time of SA into account, it's only used to inform the buyer with purchasing transaction.
Hope my answers can help you!
Good luck
Tao

Field for GR Processing time in CLM

Hi Experts,
Is there any suitable field available in standard CLM system to maintain "GR processing time" in master agreement line item, to publish it into ECC?
I also request to advice business relevance of below fields of master agreement line item (in CLM). If we maintain values in those fields of a master agreement and publish data to ERP, which of the fields in outline agreement must update?
Field
Description
Program Lead Time (Days)
Enter the lead time required to set up the program, if any.
Order Lead Time (Days)
Enter the lead time the supplier requires to place orders for items.
Delivery Lead Time (Days)
Enter the number of days to allow between order and delivery of the line item.
Minimum Order Quantity
Enter the minimum quantity of the line item you are contracted to order from the supplier.
Please advice.
With regards,
Prabhakar

Hi
If GR processing time in Material Master say 5 days Then..
During MRP run or when Scheduling or forcasting is done then this Lead time will be addd...
Now inhouse production time eg 5 in days ......means it determine the planned dates for planned orders in materials planning.
This will add little valu in your understanding..
Sujit

Process times in recipe group

Similar Messages

Maybe you are looking for