[Process: TLReportedTime]: there is no transaction record at level -1 for this approval process
This is happening in a demo version. Nothing has been changed. Any idea if this has been reported earlier ?
Thanks,
R
Hi,
Do you mean that the notification is not appearing in both the users? It should be available in one of the users. There are 2 options..
1) Approve/Reject from the other user account where the notification exists.. anyways audit will show the person name only and should be fine
2) Ask the requestor to change the requisition(withdraw process) and then submit it again... (if you are using iProc).
Regards,
Praveen
Similar Messages
-
Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.
Couldn't complete what request? Way more information please.
What operating system? -
I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?
Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
I have a Mac OSX 10.4.11 and want to purhase software (Quickbooks). Is there any place that I can buy software for this computer?
http://store.apple.com/us/browse/home/shop_mac/software/finance
However, the system requiments are pretty steep:
Mac OS X v10.6 or v10.7
2GB of RAM
Intel Core 2 Duo or later
so you at minimum need to upgrade the OS to at least OS 10.6. That is this package:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
I'm in Idaho 100 miles from an Apple Store and use the online Apple store all the time. Iy's your best resource in the rural West. -
I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?
It depends upon how the other machines are connecting to your MBA:
If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them -
How to delete photos from camera roll only, let the rest remain in albums? Is there any no-PC or no iTunes solution for this?
If these are albums, you created on your phone, using pics in your camera roll, you delete the pics from your camera roll & they will be deleted from the albums as well. The albums don't actually contain any photos, only pointers to the actual photos, which are in your camera roll.
So, the answer to your question is no. -
Pending Move Transaction ****Error: Status not applicable for this Locator.
Hi guys,
Let me know if you have experienced the following error in the pending move tranasctions with Back flush process?
Message error:
Status not applicable for this Locator.
Transaction processor error
Thanks,the receiving with locator works only if there is a valid default locator defined in the system.
There is no option to enter the Locator manually in the receiving pages of iProcurement.
Locator and/or serial controlled Items must be received in the Core PO Receipt Form and not in iProcurement.
Cannot Receive Requisitions For Inventory Items Which Are Locator And/Or Serial Controlled (Doc ID 809408.1)
Also refer to the below,
Unable To Receive Inventory Item In iProcurement or Core Apps Receiving Due To Locator Error (Doc ID 819083.1) -
Is there any way of recording a voice message for call waiting?
Hi,
I currently have the call waiting system set up on my iPhone, so i can see when other people are trying to call me whilst already on a call.
However i would like the caller to know that i'm aware of their call so was wondering if there is an app or any software where i am able to record a voicenoWhat I'm saying is call waiting is a carrier feature so a recording to interrupt the incoming call while you continue to talk likely would have to be implemented by the carrier. I don't have a recorded message for call waiting but call your carrier to find out if they offer such a feature.
-
I have a iPhone (Ver #4), and I didn't (consciously) put any tunes into the iTunes section. Yet, I have 545 songs.
Was this input automatic, synced from my iTunes on my computer? Must have been ... how can I delete them from the iPhone?
Don't listen to them on the phone.Removing a device from a previous owner’s account
Biesal wrote:
Is there any other way i could reveal or know the icloud ID used to use before on this phone??
No. -
Is there a way to create a plan guide for this query?
How can i create a plan guide for this query，suppose i can't change the query text:
USE AdventureWorks2008R2;
GO
SET NOCOUNT ON;
GO
-- query plan statement starts
DECLARE @Group nvarchar(50), @Sales money;
SET @Group = N'North America';
SET @Sales = 2000000;
SET NOCOUNT OFF;
SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;
-- query plan statement ends
AdventureWorks2008R2's parameterization option is simple, i want this type of query can reuse plan:
DECLARE @Group nvarchar(50), @Sales money;
SET @Group = N'Other Country';
SET @Sales = 88;
SET NOCOUNT OFF;
SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;
I tried many times ,but it didn't work:
declare @xml nvarchar(max) -- the plan i want to reuse
set @xml = (select cast (query_plan as nvarchar(max))
from sys.dm_exec_query_plan (0x060006001464570B405D92620200000001000000000000000000000000000000000000000000000000000000))
-- create plan guide
exec sp_create_plan_guide
@name ='Test'
,@stmt=N'SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;'
,@type =N'sql'
,@params =N'@Group nvarchar(50), @Sales money'
,@hints = @xml;
Thanks.I guess you don't wanna fire these queries "adhoc" but prepared instead to reuse the plan:
exec sp_executesql N'SELECT FirstName, LastName, SalesYTD FROM Sales.vSalesPerson WHERE TerritoryGroup = @Group and SalesYTD >= @Sales',
N'@Group nvarchar(50), @Sales money', N'Other Country',88
exec sp_executesql N'SELECT FirstName, LastName, SalesYTD FROM Sales.vSalesPerson WHERE TerritoryGroup = @Group and SalesYTD >= @Sales',
N'@Group nvarchar(50), @Sales money', N'North America',2000000
Bodo Michael Danitz - MCT, MCITP - free consultant - performance specialist - www.sql-server.de -
Text is too small. I need to have larger text when I open Firefox.
You can set the layout.css.devPixelsPerPx pref on the <b>about:config</b> page to 1.0 (current default value is -1.0) to restore the behavior of previous Firefox versions.
*http://kb.mozillazine.org/about:config
If necessary, adjust layout.css.devPixelsPerPx starting with 1.0 in 0.1 or 0.05 steps (1.0 or 0.9) to make icons show correctly.<br />
Use an extension to adjust the text size in the user interface and the page zoom in the browser window.
Use this extension to adjust the font size for the user interface.
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
You can look at the Default FullZoom Level or NoScript extension if web pages need to be adjusted after changing the layout.css.devPixelsPerPx pref.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
See also:
*https://support.mozilla.org/kb/forum-response-Zoom-feature-on-Firefox-22 -
My boss just purchased and IPad and needs an app that allows -
Powerpoint Editing and graphics capability/accessibility.
Notetaking and audio recording.
Japanese Translator.
Is there any appl or two that are recommended for this busy traveling executive?
Mahalo Nui Loa!dmkimball wrote:
Japanese Translator.
Have a look at
http://itunes.apple.com/us/app/google-translate/id414706506?mt=8 -
Aplication Vs. Page level items for application process
Hi,
I have many application processes in my applications, many of them take parameters.
Right now I am passing parameters using page level temporary items. This is causing each page to have many items that are only used for calling the application process.
Is it better to use application level items for this purpose?
any pros and cons for each of these?
~KetanArie,
Are you saying that the condition only apply to rendering the item, but the APEX engine will still consider such an item a valid “internal” variable?
Yes. The absence of a condition on a page item or a condition that evaluates to true simply allows it to be rendered on the page. The existence of the item in the page definition allows it to hold session state.
We're planning to introduce a non-displaying page item type just for this purpose, sort of a scratchpad variable with no display properties, like an applicaition item but defined on a page.
Scott -
Is there any alternate transaction for ME05 ?
Hi All,
In ME05, i will have to input material and plant data. Is there any alternater transaction where the input data would include - Vendor as well as purchasing organisation ?
Thanks & Regards,
PSSDear PSS,
ME01 if you want to maintain Source List
ME11 if you want to maintain Infor Record
<b>Source List</b>
A source list specifies the possible sources of supply for a material over a given period of time. It shows the time period in which a material may be ordered from a given vendor or under a certain long-term purchase agreement.
The source list supports the user in answering the question: "Which vendors or internal suppliers can supply a material at a given point in time?" It is also used in the automatic selection of vendors for a material.
<b>Info Record</b>
Info record is short for information record. The info record contains concise information about a vendor and a material that Purchasing already procures from that vendor. An info record thus represents a material-vendor relationship.
For example, the info record indicates the units of measure in which materials are ordered from the vendor, and the applicable reminder levels. It also shows price changes affecting the material in question. This information can be useful in the process of evaluating quotations to determine the successful bidder.
Info records are created automatically when you order a material. You can also create, change, and delete info records.
Hope this will help.
Regards,
Naveen. -
Ask for helps and comments for a practicing ADF sample: Entering bank transaction records
Dear experts:
I'm redeveloping a practicing ADF sample application based on an exist application system of my company.
Here is the goal for this redeveloping:
What degree of productivity can adf achieve compare to eclipse?
And hereby is a small example I began from last Monday. some progress has been achieved, but pretty lot of difficulties remained,
so I post all neccessary informations to this forum, and ask for your kind helps and comments.
Thank you all in advance!
Introduction
The X company has some bank accounts in different banks, also it’s customers may have more than one bank account in different banks. Transactions between the X company’s bank accounts and it’s new or regular customers’ bank accounts happened heavily in daily. Bank transfer records in paper form will be collected and need to be entered into an in-house Financial System(NX1) of the X company every day.
This module will implement the function of Entering Bank transactions records for NX1.
In future, this Data Entering work for NX1 will be handled by some data exchange interface automatically.
And the following implementation will be based on ORACLE XE 11g, Jdev/ADF 12c.
This link can download the document for the example, I will upload Database scripts and JDEV application files tonight.
http://223.4.132.24:8180/BlobUtilServlet?tableName=FILE_TABLE&columnName=BODY&stuffID=020010110000001481&strNO=1&type=downfile&fileName=NXDemo1.doc&directOpen=true
(The above link is a website of our own. if you meet any difficulty when access it, please let me know: [email protected]).Hi, Timo and Frank,
Thank you all for your kind replies and sound suggestions!
Now let me talk freely on this thread-and I will limit my topic scope within this Jdev/ADF Space’s theme but maybe in a more broad perspectives. And I will separate topics into different posts to avoid over length of each post. Hope you will have enough patience to read through this some long story!
Notice: Links in this article will refer to somewhere of OTN itself or a website of our own. There is no security concern on the server. For example:
http://223.4.132.24:8180/webfavorite.do?method=index&topTag=shou_A&txtTitle=ADF
(This link is collection of internet links and some abstract for each article on ADF. Not much contents on ADF in Chinese can be found.)
What you are up to?
First of all, I need to make some introduction of myself to answer “what you are up to”.
I come from China, living and working at Shenzhen city which is close to Hong Kong. And now I am running a small software company with 20 employees, our main business is to develop database centered applications which include in-house workflow/information management systems and websites/portals for organizations.
I have a pretty strong conviction that software technology should emancipate people from routine trivial mental works, just like engines in the industry revolution free people from heavily physical works. So I have a strong inclination for everything to be “automated”.
For running a company, this “automation” will not only bring the “aesthetics of everything running by itself”, but also will mean more productivity, quality and profits.—After all, no-living stuff is always cheaper than living creatures, let alone to say human beings.
However, when we software industry tried to automate business fields for our clients, the process of making software itself was still a manpower intensive, less-automation business. and this result a expensive products.
More than 15 years ago, when I began to work in an IT department of a big organization, I got to know the Oracle Designer/Developer 2000, and have being a diligent FORM/REPORT programmer for more than 4 years. I like the concept and practice of declarative design and automated generation.
And then more years past, and I left that organization and began to run a software company myself. And during these days, the mainstream technology of software development had been web oriented, Java/J2EE which I had no idea totally. But we have other guys who had expertise on it. So I just leave these works and decisions to them. And it seemed works at the beginning.
But after several years of business operation of application development for clients, I found this was a difficult-money-earn business. Even if our guys had worked hard, project schedules’ delay, over budget, clients’ complain was easily happened. Sometime we had more projects/contracts than what we can undertake, but we dare not to hire more people. I was confused:
-Was it a common situation in this field all over the world?
-What’s the key factor should responsible for?
-Where to start to improve the situation?
I know there are many factors should responsible, it’s a complex situation. Find more talented people and give better incentives for them to work hard is one choice—but it’s also a difficult task especially for a small company like ours. So to start from easy and confine solution’s scope is:
-We have these guys now, what we can do best?
(To be continued)
Maybe you are looking for
-
Unable to create reports in Crystal Reports 2008
In Crystal Reports 2008 we are getting the error message while creating a new report or refreshing the old ones. Logon failed. Details:HY000:[Oracle][ODBC][Ora]ORA-06413: Connection not open. [Database Vendor Code: 6413] Tired creating a new DSN, doe
-
Nokia Music Manager - help please
Hi, sorry if this may have been covered previously, I have looked but couldn't find anything relevant. My problem is that I save all my music on my pc in one folder and I have about 600 tracks. I installed Nokia Music Manager recently and now when I
-
Multiple videos on one page - need to keep all visible once played
Hello all, Firstly, I'll admit that I'm a novice as far as DPS goes...the app I'm working on is only my second attempt. I've managed to put the bones of it together, but I'm having problems with some video files. I only realised today that you can't
-
I want to change my password. how do I go about it? I have forgotten the answers to my security questions. The emails apple is sending to reset this is not reaching me.
-
When I render any sequence, such as a 4 minute sequence, as either a Quicktime file or AVI, Adobe Media Encoder takes many hours to render it. I had a previous issue where the export quality was too low. Adobe told me to install K-Lite Codec pack. Af