Process to migrate an mode LWAPP to IOS File in Aironet 1310

I like to know a process for migrate LWAPP to IOS File.
Thank

Hi Friend,
have a look here
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
This paragraph in the document describes the
conversion of a LWAPP enabled to an IOS enabled AP.
Best reagrds,
Frank

Similar Messages

  • Unable to load IOS bootable file in Aironet 1310

    Dear all,
    I am using Cisco Aironet 1310G-A-K9-R
    Radios for point to point communication. Actual Radio has come with IOS
    firmware version 12.3, but we are trying to upgrade it with 12.4 10b
    fireware, after we upgraded Firmware, we are able to open it in Internet
    Explorer, but we are getting a home page with different options. though we
    are able to telnet and configure it. So please send me a solution, how to
    configure it back to its original condition.
    In some Radios the IOS bootable file has got corrupted and we are unable to
    log into the Internet Explorer, we were only log through Console port and we
    are unable to reimage the Bootable image back. we are getting only
    Bridge:
    option....
    please send me a reply for both the issues.
    Thanks in advance
    Sam

    You can view a list of the contents of a file system before manipulating its contents. For example, before copying a new configuration file to Flash memory, you might want to verify that the file system does not already contain a configuration file with the same name. Similarly, before copying a Flash configuration file to another location, you might want to verify its filename for use in another command.like
    dir [/all] [filesystem:][filename] -display Display a list of files on a file system.
    show file system - display Display more information about each of the files on a file system.
    show file descriptors - Display a list of open file descriptors. File descriptors are the internal representations of open files. You can use this command to see if another user has a file open.
    Here is the URL for the Managing Firmware and Configurations
    http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32mfw.html#wp1002608

  • Single app mode in my IOS application

    I want to implement Single app mode in my IOS application through coding. For this I am doing the following steps:-
    1. I am supervising my device through apple configurator and using config profile generated by configurator itself.
    2. I have selected the restriction payload to generate my profile because I want single app mode functionality.
    3. According to apple documentation one key is added in Restriction payload that is “autonomousSingleAppModePermittedAppIDs” in IOS and later. But I am not able to find it anywhere to fill my bundle identifier. I have tried to add this key manually by editing the profile in text edit but this process invalidates my profile.
    Here is the link reference:-
    https://developer.apple.com/library/ios/featuredarticles/iPhoneConfigurationProf ileRef/Introduction/Introduction.html#//apple_ref/doc/uid/TP40010206-CH1-SW13
    Under Restrictions Payload section of the documentation.
    4.I have tried to generate my profile with the help of iPCU(iPhone configuration utility) as well but did not find anything.
    So please help me out what I am missing here or what else i need to do.
    Thanks
    Steven Meister

    Hi Ollie,
    I've found a workaround thanks to Chris from Kiosk Pro App.
    You need to transform all requests (only when Guided Access is on) with navigation type "UIWebViewNavigationTypeLinkClicked" to navigation type "UIWebViewNavigationTypeOther"
    One issue with this workaround is that the Guided Access message still appears for links using types "Form Submitted" and "Form Resubmitted". Trying to transform these types could potentially cause an error with loading the page.
    Here is an implementation by Blandine from Adaptive Channel :
    In the method :
    - (BOOL)webView:(UIWebView *)webView shouldStartLoadWithRequest:(NSURLRequest *)request navigationType:(UIWebViewNavigationType)navigationType {
    Just add  :
    if (UIAccessibilityIsGuidedAccessEnabled()) {
            if (navigationType == UIWebViewNavigationTypeLinkClicked ) {
                navigationType = UIWebViewNavigationTypeOther;
                [webView loadRequest:request];
                return NO;
    Hope it helps.
    Cheers,
    Mehdi

  • I recently updated the iOS on my ipad 3 and lost all my files in the process. How do I recover my lost files which were not previously backed up?

    I recently updated the iOS on my ipad 3 and lost all my files in the process. How do I recover my lost files which were not previously backed up?

    If you don't have them backed up somewhere, then there's little possibility of recovering them. There are some utilities that can in some cases recover an inadvertently-deleted photo, but I've found none that can recover photos or other data from an iPad that was erased as part of an iOS upgrade. You can do a web search for something like "iPhone photo recovery" and you'll find some utilities you can try.
    Regards.

  • Process for migrating CMSDK from one server to another

    All:
    We are in the process of migrating our CMSDK installation and database from one server to another. In doing so, we would like to retain our documents and folders and other custom objects that have been created till date. If there is a recommended migration process that you could point us to, it would be greatly appreciated.
    Our initial thought is to:
    1. Install the CMSDK server on the target server machine
    2. Export source CMSDK schema from source database server
    3. Import source CMSDK schema into target database server
    Are we on the right track? If so, are there any pitfalls and issues we can expect to encounter. Any information will be very helpful.
    Thanks

    The utility should help you a lot. The best documentation on how to use the utility is in the 9iFS Setup and Administrators guide (doc number A95995-01) Chapter 8. It pretty much works the same way then as it does now. These are two metalink notes on doing the export/import silently (29928.1 - 177816.1). Doing it silently is very tedious since you having to create numerous .def files and other scripts to run them.
    I will look around for any other stuff I have, but the 9iFS document is very good as a reference no matter what version of CMSDK. If you have problems finding it, I can try to send it to you, but it is around 5.6M.

  • Does back ground jobs work process go to private mode or not

    Hi Experts,
    Can any one tell me
    Does back ground jobs work process go to private mode or not
    Thanks and Regards
    Dan !!

    Hi Dan,
    I do not think background work processes would go into PRIV mode.
    the orginal information was remove by Admin because provided by Cut and Paste from SAP Online Help.
    you will find it <a href="http://help.sap.com/saphelp_47x200/helpdata/en/7a/caa6f3bfdb11d188b30000e83539c3/frameset.htm">here</a>
    The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you.
    By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX.
    DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.

  • Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

    Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

    Many thanks Deggie! I think my iPad has a big problem because is not possible to restore it....I downloaded the most upgraded version of iOS but  when I try to restore an error message occurs (4005)......

  • Process to Migrate from FI-AR to FI-CA

    What is the process to Migrate from FI-AR to FI-CA?
    I can see that in FI-CA there is a Data Transfer option, do you use this?
    Do you use the data master sync to convert standard customers to BP's?

    Hi,
    removed by moderator

  • HT4972 After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process?

    After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process? I am doing this on the latest iTunes, and a Windows XP computer.

    After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process? I am doing this on the latest iTunes, and a Windows XP computer.

  • HT4796 I'm in the process of migrating my info from a Windows pc to my mac, however the information transfer has started more that an hour ago, but the progress bar moved 2 mm? how can I spead up this process

    I'm in the process of migrating my date from a WindowsPc to a mac, however the transfer has started more than an hour ago and the progress bar has moved 2 mm on the first catogory only.  How can I spead up this process

    Hanlie wrote:
    I'm in the process of migrating my date from a WindowsPc to a mac, however the transfer has started more than an hour ago and the progress bar has moved 2 mm on the first catogory only.  How can I spead up this process
    Are you using WiFi? if you are this will take a long time, switching to a wired connection will go much faster but as you have started I would not change now.

  • Error initiating process in single instance mode

    We have implemented Guided Procedures and have included a visual approval step to review an employee's supporting documentation before an Admin makes changes based on the approval request, and also KM documentation steps and iViews.  Lately in the Alerts monitoring area I am seeing multiple errors. 
    I have checked the callable objects and all pass the check (including input and output parameters, results states, process exceptions and configuration parameters) however the error keeps showing up.  Within the process instatiation tab the process is set to 'single running process is permitted for each user'.
    Does anyone know what may be causing these alerts, and how do you repair them?
    The full alert is below:
    Error initiating process in single instance mode
    com.sap.caf.eu.gp.model.pfw.core.SingleInstanceProcessException: Error initiating process in single instance mode
    at com.sap.caf.eu.gp.model.pfw.core.impl.ProcessRuntime.startProcess(ProcessRuntime.java:1049)
    at com.sap.caf.eu.gp.ui.inst.CInstantiation.initiateProcess(CInstantiation.java:533)
    at com.sap.caf.eu.gp.ui.inst.wdp.InternalCInstantiation.initiateProcess(InternalCInstantiation.java:199)
    at com.sap.caf.eu.gp.ui.inst.VData.onPlugFromWizard(VData.java:174)
    at com.sap.caf.eu.gp.ui.inst.wdp.InternalVData.wdInvokeEventHandler(InternalVData.java:166)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:881)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
    at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1346)
    at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
    at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
    at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
    at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:867)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hello,
    The GP SingleInstanceProcessException is normal when using
    Single instance process instances which for example ESS uses.
    If  you have single instance processes and you try to start an already
    started instance, the exception will appear but will not cause problems.
    It  notifies the UI to redirect to the previous process instance.
    It is expected behaviour.
    Thanks and best regards,
    Carl Connolly
    Senior Support Consultant - Netweaver Web Application Server
    AGS Primary Support, Global Support Centre Ireland
    Guided Procedures trouble shooting guide:
    https://
    www.sdn.sap.com/irj/scn/wiki?path=/display/jstsg/%2528gp%2529home

  • Itouch in recovery mode after  failed IOS update 4.2

    My itouch 2nd or 3rd generation is in recovery mode after failing IOS update 4.2 from windows computer.  I believe my problem is
    This device isn't eligible for the requested build
    How can I revert back to supported IOS?
    thanks, jan

    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to solve iTunes error 3194 in 10 simple steps
    A 2G can go to 4.2.1
    A 3G to 5.1.1
    If you try updating to the incorrect one you will get the error you received
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

    Hi Experts,
    We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
    Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
    Can anyone let me know how to fix the issue or what needs to be done?
    Your help is highly appreciated.
    Regards
    Faisal

    Hi,
    It seems to be problem with permission of files. Please ask your basis to do following:
    1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
    2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
    3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
    Regards
    Aashish Sinha

  • So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

  • How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad?

    How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?

    Thank you!
    Disabling firewall and AV did the trick!
    Kudos.
    Alex

Maybe you are looking for

  • Open orders at the end of the year

    Hi, I have not dealt with open orders at the end of the financial orders. Just would like to know how they will be dealt with in case they are open Best Regrds Surya

  • Update failed when trying to update a nested object

    Hello, I have an enhanced class called NotifySession. It has a NotifySession type in it. When I try to update NotifySessionType in NotifySession from my transfer object, I get the following error: 16:43:26,021 ERROR [LogInterceptor] TransactionRolled

  • How do I get spellcheck to work with my gmail?

    Hi - I've been having stability problems with my Gmail on Chrome and so have returned to FF. Enjoying it too! However, the spellchecker does not work with Gmail - the tool I use most where a spellchecker is vital! Actually I cant be sure it's working

  • Changes History Report in Fire Fighter

    Hi, We have assigned FF ID to end user. By using that FF ID,user did some changes. Ex: End user has used SU01 transaction and he has assigned SAP_ALL to his own id and some other users via FF ID. When we checked the Log Reports in FF 5.3, we are able

  • Invalid header field

    When I try and manually add a manifest file to jar, a IOException is thrown with the message "invalid header filed". I have copied some manifests form some posts, I get that error, I extracted the default manifest from a jar, and tried to add it, I s