Process-to-Process "Links" Vanash

I have 4 panels in Process A ....controlled (activated & maximized) by a
sequencer in Process B. This arrangement worked fine for the last month;
However, after recompiling the processes the "links" between the processes
have vanished. The command lines and arguments are still in tact - but the
panel control from the sequencer is not functional.
Recompiling in different orders does not improve or alter the situation.
The only way I can reestablish the Panel/Sequencer connection is to delete
the "Panel-Active and Panel-Maximum" commands for each Panel then reenter
them.
I am also experiencing an identical problem with 1024 indicators. I DO NOT
want to delete and reenter all of those!!!
What has gone wrong? and is there an
y easy recovery?

That is the answer - Symbolic Links. I used a Symbolic Link for everything
that references another process and a lot of my little Ghosts disappeared -
not only the "Vanishing Links" thing.
Thank you for the assistance.
-Loren
"Loren Hunt" wrote in message
news:[email protected]..
> This happened again - I still have no root cause of the problem. This
time
> I was just changing some object names unrelated to the panel controls.
> ---------
> The 1024 buttons started working again. I can't explain what I did to make
> that happen (maybe when I started kicking the dang thing?...lol)
> ---------
>
> "Loren Hunt" wrote in message
> news:[email protected]..
> > I have 4 panels in Process A ....controlled (activate
d & maximized) by a
> > sequencer in Process B. This arrangement worked fine for the last
month;
> > However, after recompiling the processes the "links" between the
processes
> > have vanished. The command lines and arguments are still in tact - but
> the
> > panel control from the sequencer is not functional.
> >
> > Recompiling in different orders does not improve or alter the situation.
> > The only way I can reestablish the Panel/Sequencer connection is to
delete
> > the "Panel-Active and Panel-Maximum" commands for each Panel then
reenter
> > them.
> >
> > I am also experiencing an identical problem with 1024 indicators. I DO
> NOT
> > want to delete and reenter all of those!!!
> >
> > What has gone wrong? and is there any easy recovery?
> >
> >
>
>

Similar Messages

  • Firefox does not process paypaly continue_shopping links correctly.

    firefox does not process paypaly continue_shopping links correctly. When you are at the paypal 'View Cart' and click on the continue shopping link it should take you back to the page you came from (this works in IE and Chrome) instead you end up on a 'sign in to PayPal page'
    As far as I know this will happen on any page that is using PayPal add to cart buttons with a continue_shopping_url but you can see it on my own page below.
    == URL of affected sites ==
    http://amazingporcelain.com/beads.php

    Very odd today it seems to work ok. I've tried it several times over the last week and each time it would do as described above. Today it works properly. Go Figure.

  • I'm trying to get a public link to my pdf file? I tried the system's process and the links don't work

    I'm trying to get a public link to my pdf file? I tried the system's process and the links don't work. I can't even copy the links I have to write them down and then enter them. Is anyone else having this problem. I've seen this question a couple times with no replies.

    Hi mariondouglas,
    Do I understand correctly that you've used Send to send a file that you've uploaded to Acrobat.com? What happens when you send to your own email address? Are you able to click the link in that email, and access the file that way?
    If you're unable to copy the email in the browser window after you've generated a public link, please clear the browser cache, and try again. Or, use a different web browser (for a list of supported browsers, see System requirements | Acrobat.com).
    Please let us know how it goes.
    Best,
    Sara

  • How to connect processes in Process chain

    Hi,
    How to connect processes in Process chain.
    how to make it as black,green,red.
    Thanks,
    Madhu.

    Hi,
    u can connect first process in a Process chain to second, just click on first process and drag and drop onto second one.
    3 options will appear:
    1. succesfull---green line
    2. unsuccesfull----red line
    3. always-----black.
    select one option then linked will be formed.
    green line means the second process will be executed if and only if first process ran successfully.
    red line means the second process will be executed if and only if first process ran unsuccessfully.
    black line means line means the second process will be executed even if first process ran successfully or unsuccesfully.
    bye.
    "assign points if info. is helpful"
    Narendra reddy.

  • Business Process Maps/ Process Flows for Retail Operations

    Dear All,
               I am looking for Business Process Maps/ Process Flows for Retail Operations like forecasting, inter store transfers, ASN, Procurement, Allocation etc.
    Kindly provide me with a link, docs, PPts etc.
    Appreciation would be in the form of points.
    Regards,
    Jack Silverz

    Hi Jack
    Seeing as you only got one reply - I'm jumping in with my 2-peneth.
    Seldom have I found process content which sufficiently explains both manual and automated processes in a format which is sufficiently simple to engage discussion (between project teams and business representatives).  Is there a way to strike the required balance - simplicity for the sake of engagement; yet rich enough to record SAP dependencies, system requirements and so forth.
    An answer in my opinion is [here|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007].  (Honest account - I work for Nimbus.  But you don't have to take my word for it.  Check out our case studies if you like. This approach is being adopted by several strategic SAP accounts several of which are listed [here|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007]).
    What might partly address your requirement is the [APQC Process Classification Framework|http://www.apqc.org/portal/apqc/site/?path=/research/pcf/index.html] . We took this framework as a starting point for building a model company process map. I cannot claim that it is Retail specific, but we have quite a few retail customers who have adopted Control 2007 and also several supply chain optimization projects which we have delivered.
    If this is of interest - we provide a web hosted demonstration environment where you can explore the APQC process content I mentioned above. You can contact me through [SAP EcoHub|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007] for more details
    Kind regards,  Nigel

  • Problem with AND processer in process chains

    Hi friends,
    In BI 7.0, when creating a process chain by linking 2 DTPs with AND processor,
    two AND processor are showing.
    Can anyone please suggest how to get only one AND processor after combining also.
    babu

    Hi Babu,
    You can remove one AND process step from the design.
    (Right click on the process step and Remove Process)
    Connect two DTPs with the remaining AND process step, Save and Activate.
    This will solve your problem.
    Regards,
    Sreedhar

  • About Mass processing/Collective Processing Validation

    Dear SAP MDG guru,
    I have a question regarding mass processing/Collective processing in MDG
    Are there any Badi, Or class that we can use in the screen collective processing (like below screen shot), i know that it had a check button like the screeshot below,
    But it always give a no errors found, eventhough when you go to the single processing of each object,you can save it, even its give error message, and you can approve collective processing with the error data, and its really weird
    so can anyone help me, can we use the check button to leverage the validation?

    Hi
    You can refer below link
    Definition of Validations and Derivations - SAP Help Portal
    It says SAP Triggered function
    CHECK_ENTITY (Check entity): The system executes the function assigned to this event when entity values are validated during single or collective processing, when mass changes are made, or during the upload process.
    So please see Technical help may be help to get your answer

  • PP-PI - Process message processing and batch management in PI_CONS message

    Hi All,
    Hope you can help me to find the better solution... I will try to explain my scenario
    Scenario: to control the production run PP-PI module is in use. Process order are created in SAP system and then transferred to the process control system where the execution of the process order is controlled On-line. Once per month the confirmations are transferred from this control system to SAP. In the Process control system batch are not managed. For good issue posting standard process message PI_CONS is used.
    Now we have the situation that some raw materials used for process order processing are managed with batch. During the process order creation the batch related with this raw materials can be determined, only during the month when the raw material is entered in the plant is where the batch is determined. At the end of the month the batch of this materials is available in the SAP system (not in the process control system). Due to behavior of PI_CONS regarding batch if this characteristic is not informed in the process message or in the reservation an issue is trigger.My doubts are:
    1.- If I need inform the batch  during this confirmation ,an even split the quantities in the process message according the batch availability, I'm force to use a custom process message or there is other workaround? (remember is not feasible send the batch to the process control system)
    2.- probably i miss something because I'm can't debug the execution of the process message. How can I debug the execution of a manually created process message?
    Sorry for the long explanation I try to explain my scenario as better as possible.
    Thanks in advance for your valuable inputs.

    Thanks for your replay.
    No really I don't like to make  the batch mandatory, during the good issue is not feasible inform the batch due to it is not managed in the Process Control System. Due to the behavior of PI_CONS if for batch managed materials the batch is not informed in the message or in the reservation an error is trigger. In the reservation snot feasible inform the batch because in that moment is unknown.
    My question is if it is feasible some how have like FIFO batch determination when the process message is processed without creating a custom message.
    Thanks in advance

  • Bussiness Process, Integration Process, cc-BPM, BPM

    Hello Everybody!!! Please help me!
    1) In XI, Business Process = Integration Process = cc-BPM = BPM ??? Are these four the same thing?
    2) Please tell me if I'm wrong: we have two types of message exchange in XI, stateless (through simple message exchange) and (ii) statefull (with BPM). There is no other type, ok?
    thank you
    Julio

    Hi Julio,
    This is an excerpt from one of the posts:-
    BPM- Business Process Management- in XI BPM and ccBPM interchangeably used. for more on BPM- as an SAP standpoint or Business Process level - -/people/thomas.volmering/blog/2005/09/21/welcome-to-the-new-bpm-corner
    ccBPM- Cross Component BPM -
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/archive-xi_ppts_internal_etc/sap%20netweaver%20rig%20webinar%20-%20cross-component%20business%20process%20management%20with%20xi%203.0.pdf
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
    Hope this helps.
    Regards.
    Praveen

  • Parallel process in process chains

    Hi All,
    I have created a process chain with two parallel jobs (for forecast run) in APO DP. whenever i'm checking it, it is showing me that <b>"Too many parallel processes for chosen server"</b>
    In the diagnosis, the message is "On the server  you have chosen, there are only 1 batch processes available. The process chain has been designed in such as way that 2 processes must be processed parallel".
    Do I need to maintain any settings.Please let me know.
    Thank you.
    Regards,
    Raj

    Hi Raj,
    What it is complaining about is that the number of batch processes(background processes) available on the system are only 1 and you have given it 2 background processes..now if the system only has 1 bckgnd process,, how will it run 2 processes ) ??
    You can check the number of background processes in SM50 and then modify the number of background processes in RZ10(start up profile)......Ask your basis guy to increase/check that???
    Thanks
    Abhi

  • How to identify which process in process chain executes in Batch and Dialog

    Hi, We want to identify which processes in process chain is running in Batch mode or Dialog mode. Is there any where we can identify this from any table or transaction. (Eg Loading, DTP loading, Attribute change run, deletion of index, deletion of overlapping request, AND process, ABAP program , Master Data loading, Full Load, Delta load, Hierarchy Save, Start Process).
    Regards
    Vishwanath

    Hi Vishwanth,
                      In Process Chain proces runs in background only.
    refer here......
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/7b/d4313b38bea774e10000000a114084/content.htm
    Thanks,
    Vijay.

  • How to stop a process in process chain

    Can anyboday help , How to stop a process in process chain .
    Thanks
    PP

    Hi Phani
    In RSPC, Open the Meta Chain, In Process Chain Manu bar,
    Select the option "Remove From Schedule"
    Hope this will help you
    Regards
    Saravanan.ar

  • Back ground processes, dialogue processes and Process chains

    Hai all,
               I am going through making process chains and I am struck with one thing:
    "How many background process chains and dialogue processes you have during run time"
    This is the problem. I understood everything else except this.The concept says that I have to know what is the capacity of the system, how many background and dialogue processes it could accomodate, how many are left and how many you can use for your process chain.How do we find out this? and could somebody please explain me or refer to documentation about the Back ground processes, dialogue processes and Process chains.
    Thanks.

    Hi Visu,
      You can see the number of dialog and background processes by using transaction SM51 and then double clicking on the server (we only have one but it may be different for each). Our BASIS folks take care of the number of processes as well. And, for us we have a schedule that changes the number at a certain time of day because you tend to need more dialog during the day but more batch at night.
      The transaction to look at and change the settings is RZ03. Then use the menu path Edit->Operation Modes you can select either Configuration or Timetable here. Both give information in different ways. I tend to double click around to see what it might tell me.
      I hope this helps a bit,
    Diane

  • Automatic Row Processing (DML) process is not updating the record

    Hi all,
    I have an application which was working fine last week and tested and backuped to new application. This Monday, one of the form in that application is not updating the data all of a sudden. I debug that by having page 0 variable and assign the value from the column variable to page 0 variable. Whatever value I changed to the column variable was getting updated to page 0 variable. But it is not updated in the database. So, I changed the success message of the "Automatic Row Processing (DML) process" and I can see the success message on the page, but the column value does not get updated. But when I go back and checked my backup application, that page is working fine. For now, I copy that from the backup application, but I would like to know why this is happening?
    Thanks
    SHY

    Hi Scott,
    Thank you very much for your response. Because of the database complexity, I can't create/import the application on the apex.oracle.com. I am just wondering why this is happening. One of my coworker said same thing happened to her in one of her project and it gets resolved once she restart the server. I am not able to restart the server to check and see if this resolved as the application is on the client server. Do we need to clean up any log file? Thanks.
    SHY

  • Strange behaviour  Automatic Row Processing (DML) process

    Hi all,
    I'm executing a process with a fetch Automatic Row Processing (DML) over a synonym and it works perfectly but when i change the table owner it doesn't work anymore and give the error:
    ORA-06550: line 1, column 17: PL/SQL: ORA-00936: missing expression ORA-06550: line 1, column 9: PL/SQL: SQL Statement ignored
    Unable to fetch row.
    I thought it could be from the permissions of that owner over that synonym so i give it all grants, but still no luck.
    Does anyone knows if there are some limitations for the Automatic Row Processing (DML) process?

    Once again thanks for the reply Munky,
    The original table created on schema1 (ADMGIN) :
    SQL> desc MAN_ALT_TAB
    Name Null? Type
    ALT_ID NOT NULL NUMBER
    ALT_DES VARCHAR2(50)
    AAT_COD NOT NULL VARCHAR2(10)
    ALT_ID_REL NUMBER
    ALT_MUL_REG VARCHAR2(1)
    ALT_FOR_DES VARCHAR2(4000)
    The synonym created in schema2 (PORTAL) :
    CREATE OR REPLACE SYNONYM "PORTAL"."MAN_ALT_TAB" FOR "ADMGIN"."MAN_ALT_TAB";
    Grants on the schema1 (ADMGIN) owner:
    GRANT ALL ON MAN_ALT_TAB TO PORTAL;
    There isn't a new table in the schema2 only a synonym.
    The synonym isn't created in schema1 it was created in schema2.
    Regards Pedro.

  • DataPackage1:arrived in BW, Processing 2nd processing step not yet finished

    Hi BI-experts!
    I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
    The Loading process is hanging in processing step u201CSERVICE APIu201D.
    The process  in hanging in status "yellow" and then changed after a while to status u201Credu201D.
    [0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
    The following steps within Load process are yellow and then red:
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Missing messages or warnings
    Request IDoc : Application document posted (is green)
    Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
    Info IDoc 1 : sent, not arrived ; Data passed to port OK
    Info IDoc 2 : sent, not arrived ; Data passed to port OK
    Info IDoc 3 : sent, not arrived ; Data passed to port OK
    Info IDoc 4 : sent, not arrived ; Data passed to port OK
    Subseq. processing (messages) : Missing messages
    Missing message: Subseq. processing completed
    DataStore Activation (Change Log) : not yet activated
    Question:
    Can some one tell me whether my distribution model or other settings are wrong?
    I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
    Thank you very much!
    Holger

    Hi!
    Many thanks for your response.
    The tcode WE05 on source system showing the following:
    Inbox IDoc's: RSQRST (amount: 1)
    Outbound IDoc's: RSINFO (amount: 4)
    When I go to SAP BW System (tcode WE05) i cannot detect any Inbound IDOC's of message type RSINFO.
    What is wrong in my configuration?
    Thank you very much!

Maybe you are looking for