ProcessDPCommands  Error WIS 30270 for BW key figures

Hello,
  we created a BO universe on top of a BW 3.5 query.   In Webi, when we try to report on the universe we are getting this error  "an internal error occured while calling the 'processDPcommands' API (Error: 30270)".  We are using XI R3 version of BO.  We only get this error when we try to pull in key figures into the report.  All the characteristics works fine.  We are trying to report from the FI cube in BW (0CCA_C03).
  Any help will be appreciated.

Thanks Ingo. We are going to open the case.
Do we need to pull consistent detail objects of all the13 levels in the hierarchy to the WebI query ?
For Example, I have pulled all 13 level dimension objects (Blue), Org unit Key (Detail Green Object) for only L03,L04 and Org Unit Medium Name  (Detail Green Object) for L08,L09.
Do I need to pull all 13 dimension (Blue Object), all 13 Org Unit Key and all 13 Org Unit Medium Name? I mean do we need to select consistent detail objects consistent across the levels?
Thanks
Jai

Similar Messages

  • Property u201Czero allowedu201D must be identical for all Key Figures.

    I am having the following error message when trying to run a Statistical Forecast in the Background.  The job cancels out and I receive the error message:  Property u201Czero allowedu201D must be identical for all Key Figures. 
    When I look in RSA1 under Key Figures Details "zero allowed" appears to be checked for all Key Figures.  Can anyone point me in the correct direction I've already tried searching and did not find the answer.
    Thanks.

    HI,
    The setting is not in RSA1 but is in /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network Planning
    choose the relevant Planning area right button click on the Planning area choose change key figure settings. From here you can check the flag Zero allowed for the key figure that Stat. FCST is generated.
    Best Regards,
    Ivo Stoyanov

  • Currency Translation for Calculated Key figures

    Hello Friends I want to use the Currency Translation for Calculated Key figures.
    But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
    What is the way to do fixed currency translation in query for calculated key figures.
    All the below is done now just want to specify this in query but I can'nt since it is greyed out.
    All the below is done
    I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
    2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
    3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
    which is beginning of period.

    Hi soniya
    Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
    Thanks
    Tripple k

  • Error WIS 30270 in BO 4.0

    Hi
    I'm testing BOE 4,0 SP1 Path3 in 2 new Windows 2008 64 Bits with 4 and 8 Gigas. When I create a new document WEBI (Interactive Analysis) or I open a old document (import of 3.1). It appears error  WIS  30270 (The user is Administrator).
    Somebody can help me?
    Thanks
    Jose C.

    Thanks Denis,
    In my previous case I installed in directory  "Program Files X86", Then, i used 32 bits drivers. I have returned to install in directory PPPSS the DRIVERSS of the ODBC are 64 bits. Now, I install BO4 in directory "Program Files". The drivers of the ODBC are 64 bits, but, the continuous error.
    It could be a JAVA error?
    -Java Version: Java Plug-in 1.6.0_19
    -ODBC: BusinessObjects CMS 140  > Default DDBB in server BO4> Driver: SQL Server Version 6.01.7600.16385
    -BO4 installed in English and Spanish
    The error:
    "com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Error interno al llamar a la API 'initInstance'. (Error: ERR_WIS_30270)
    +     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)+
    +     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)+
    +     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:122)+
    +     at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)+
    +     at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)+
    +     at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:93)+
    +     at com.businessobjects.sdk.core.server.internal.InstanceServer.init(InstanceServer.java:81)+
    +     at com.businessobjects.sdk.core.server.internal.InstanceServerServiceImpl.createServer(InstanceServerServiceImpl.java:90)+
    +     at com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.createServerCallerReader(DocumentInstanceManagementServiceImpl.java:642)+
    +     at com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.internalNewDocument(DocumentInstanceManagementServiceImpl.java:580)+
    +     at com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.newDocument(DocumentInstanceManagementServiceImpl.java:99)+
    +     at com.sap.webi.client.toolkit.internal.document.DocumentAccessCommonImpl.createDocument(DocumentAccessCommonImpl.java:69)+
    +     at com.sap.webi.client.toolkit.SessionContext.createDocument(SessionContext.java:262)+
    +     at com.sap.webi.ui.tasks.NewDocTaskInfos.createNewDocument(NewDocTaskInfos.java:68)+
    +     at com.sap.webi.ui.tasks.workflows.NewDocumentTask.doIt(NewDocumentTask.java:53)+
    +     at com.sap.webi.ui.tasks.workflows.NewDocumentTask.doIt(NewDocumentTask.java:11)+
    +     at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:109)+
    +     at javax.swing.SwingWorker$1.call(Unknown Source)+
    +     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)+
    +     at java.util.concurrent.FutureTask.run(Unknown Source)+
    +     at javax.swing.SwingWorker.run(Unknown Source)+
    +     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)+
    +     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)+
    +     at java.lang.Thread.run(Unknown Source)+
    Caused by: com.businessobjects.sdk.core.server.ServerException: Error interno al llamar a la API 'initInstance'. (Error: ERR_WIS_30270)
    +     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:237)+
    +     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:215)+
    +     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:118)+
    +     ... 21 more+
    Caused by: com.businessobjects.sdk.core.server.ServerException: Exception caught:ASFException:[repo_proxy 23] FolderFacade::getRootFolderInfo - check rights has failed One or more arguments are invalid.(hr=#0x0)
    +     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:237)+
    +     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:213)+
    +     ... 22 more+

  • BEx report -two different calculations for a result for one key figure how?

    All,
    Maybe someone could help me with the following, we have a requirement to setup for one key figure two calculations for result rows. One result (average) for one level, and on a higher level -grand total have a (sum), as for our business it makes sense to do it this way. We have setup average for this KF, we get correct results (see below values 7,5 & 6,5) however for the grand total (across multiple products) so for one level up we need to have a different calculation. How could we achieve this?
    Here is an example:
    location     product          inventory     
    AAAA     11111          5     
    AAAA     11111          5     
    AAAA     11111          10     
    AAAA     11111          10     
    AAAA     Result          7,5      ---> average
    AAAA     22222          5     
    AAAA     22222          6     
    AAAA     22222          7     
    AAAA     22222          8     
    AAAA     Result          6,5       -
    > average
    AAAA     Result (across products)          14      ---> here I want to have a sum of averages

    This could be achieve only IF you upload a hierarchy for product inventory with different levels, wherein each level show subtotals and finally grand total will be shown at the end of the results.

  • Do we write variable customer exits for virtual key figures in Bex?

    Hi all,
    Am I thinking the right here " We write variable customer exits in CMOD for virtual key figures in BEx " or am I totally wrong. If thats the case where do we write it.
    Thanks,
    JB

    Nevermind

  • Add update rule for new key figure in one info struc

    Hi, everyone
    I would like to know how to add update rule for new key figure in one info struc.
    Thanks ahead.
    Eric

    1)I have created the update rule for one info structure
    2)add one key figure in the info structure due to business requirement
    3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
    Can anybody tell me how to do with it?
    Any answer will be appriciated.

  • How to create Variables for the Key Figures

    Hi All,
    How to create Variables for the Key Figures
    Thanks
    Bhaskar

    Hi,
    It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
    With rgds,
    Anil Kumar Sharma .P

  • ABAP-Coding for EVERY Key figure in infocube 0RT_C02

    Hello gurus;
          Does anybody know which is the reason for Abap-coding for every key figure in infocube 0rt_c02 from InfoSource 2lis_13_vditm?
    Thanks in advanced!
    Csr

    Hi,
    this is done like this in the business content because the extractor is providing the data with a process key; this process key is then translated into meaningfull business objects (key figures);
    fro instance ProcessKey 202 in application SD is reflecting Credit memos:
    * Credit Memo
      IF COMM_STRUCTURE-PROCESSKEY = '202'
        AND COMM_STRUCTURE-BWAPPLNM EQ 'SD'.
    * currency convert
        IF COMM_STRUCTURE-COST <> 0.       "Value in document UNIT
          PERFORM LOC_CURR_CONVERT
            USING    COMM_STRUCTURE-COST   "Value in doc UNIT
                     COMM_STRUCTURE-TRANS_DATE     "Date for exchange
                     COMM_STRUCTURE-DOC_CURRCY     "Document Currency
                     COMM_STRUCTURE-LOC_CURRCY     "Local currency
    *                COMM_STRUCTURE-EXCHG_RATE     "Exchanging rate
                     COMM_STRUCTURE-/BIC/ZEXRATEAC "Exchanging rate Acctn
            CHANGING RESULT.
    * the KPI's must be turned to positive because the SD-extractors
    * allways deliver them neg. if it's a process back (e.g. return order)
          RESULT = RESULT * ( -1 ).
          UNIT = COMM_STRUCTURE-LOC_CURRCY.
    * if the returncode is not equal zero, the result will not be updated
          RETURNCODE = 0.
        ELSE.
    * if the returncode is not equal zero, the result will not be updated
          RETURNCODE = 4.
        ENDIF.
      ELSE.
    * if the returncode is not equal zero, the result will not be updated
        RETURNCODE = 4.
      ENDIF.
    the above routine is quite self explaining the code.
    hope this helps...
    Olivier.
    Message was edited by:
            Olivier Cora

  • Create Badi for Virtual Key Figure

    Hi experts,
    i have to create badi for virtual key figure in BIW for dat i m creating Badi in BI development but its asking for Access Key.
    Badi name is RSR_OLAP_BADI
    i want to know while creating classic Badi with Implementation Name do developer need access key or thr any othr way to develop Badi for Virtual Key Figure.
    Tell me for creating virtual key figure in biw we use Badi and for dat we have to create the Badi in BIW Dev. or in R/3 Dev.
    it first time dat i m creating BAdi.
    Ankit
    Edited by: ankit375 on Feb 3, 2011 11:14 AM
    Edited by: ankit375 on Feb 3, 2011 11:14 AM

    To see how to create this BADI see here:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b2babc-15ad-2d10-c4b2-bd3af67d86b1
    You you need to be registered as developer (you have to have dev.key) to do the coding.

  • Calculate total and average for same key figure

    Hi Experts,
    I have a requirement where I need to calculate total and average for same key figure no of employees.
    eg:                
    If I enter 03,2009 as Input the reuslt should give from financiual year starting to current month.
         11.2008      12.2008     1.2009     2.2009     3.2009        average
             11          10       12       10        10         10.6
             10         10       11       12        10         10.6
    total         21         20       23       22        20          21.2
    we have only one characteristic in rows... companycode.
    Waiting for your Inputs.
    Regards
    Prasad Nannuri

    no it will work for u
    you have to use variable on 0calmonth or fiscal period depending on what Time characteristic u are using.
    lets say that variable is zcalmonth
    it is based on 0calmonth for e.g.
    now u restrict keyfigure with this variable zcalmonth with time char. = 0CALMONTH
    copy and paste the restricted keyfigure
    now set offset for variable in  variable selection screen dialog box = -1
    repeat this until u want
    make this variable mandatory
    now at query execution user will select any value for month/year
    and u will see all 5 months in result set
    now there can be maximum 12 months in a year, so u end up creating only 12 restricted keyfigures.
    use YEAR in restricted keyfigure too, and restrict it with YEAR VARIABLE processing by CUSTOMER EXIT = CURRENT YEAR
    in this case it will automatically removes any additional values...
    for e.e.g
    YEAR = 2008 only
    User entered 6/2008
    so lets say ur financial year starts in  april 2007 and ends in april 2008
    so u expect to see
    4/08
    5/08
    6/08
    but u created 12 restricted keyfigures , so it will show upto
    4,5,6 months only

  • Planning book values for certain key figures show doubled up numbers

    currently on SCM 7.0, we are facing a strange intermittent issue of doubled up values in planning book for certain key figures when compared to the underlying Infocube.
    This happens when the Input process step happens, some times when the process step fails in chain and is run again.
    After its run then we load data to the planning book , then when the key figures show up for the current week bucket they show Doubled up values
    We tried to run a consistency check /SAPAPO/OM17 (DP time series option) but no result.
    Can anyone mention what could be the reason ?

    Hi,
    Please check the data in the cube for the codes . There could be double request for the same keyfigure. When you copy from cube whatever value avilable in the cube gets into Planning book.
    Transaction : LISTCUBE
    Solution : Delete the old request and check the value agina in cube. Execute the TSCUBE.
    Thanks,
    Jeysraj

  • Exception aggregation for calculated key figure

    Is it possible to have exception aggregation for calculated key figure in BW 3.5? As per Note 1151857, it is possible, however this note applies to BI 7.0.
    As per note 152638, it is possible in older version only simple ckfs like 'CKF = Base key figure'.
    Is there any workaround to define exception aggregation for complex CKFs in BW 3.5?
    My requirement is like this -
    CKF = (sales quantity - forecast) %share (sales quantity).
    Aggregation for CKF over time should be sum whereas, for all other characteristics calculation of CKF should be done after aggregation(normal scenario).
    So, defining exception aggregation of CKF as 'Summation' over time should fulfil my requirement.
    I can not use calculate result as 'summation' setting for CKF because of following design of report.
    Report contains structure(characteristic)
    Elements of structure are -
    Last 3 months(April - June)
    Last 3 months - 1 (Mar - May)
    Last 3 months - 2 (Feb - Apr)
    and so on...
    When data is aggregated for each element of structure, base KFs will be aggregated and calculations will be done on that.
    Changes in the backend are also not possible because, normal aggregation of CKF-alike in backend will be summation for all characteristics.
    Is there any way in BW 3.5 to model such a scenario?
    Thanks and Regards,
    Anup Kulkarni

    Sum of individual values of CKFs is not same as the Calculation on 'sum of basic key figures(result of basic key figures)'.  - Yes, you are right.
    I need to aggregate CKF over time as SUM. However, calculation for result of all other characteristics should be based on results of basic key figures and not the 'Sum of individual values of CKF'.  -
    What i understood is that whenever the time char is in row, then result should be simple on the sum what ur getting but when other char are there then it should go for calculation based on the sum of key figure.
    If im not wrong in getting ur point.
    How can two differenct activites be perofrmed on same key figure depending on the characteristic .....!. For this u have to think some other possibility or let somebody else update the thread.

  • No split for particular key figure while "Time Distribution in Update Rule"

    Hi experts,
    I wanted to have data in the infocube at day level. Currently it has only week level data. So I used "Time Distribution in Update Rule". Due to this am able to split 0Calweek data at 0calday.
    But while using   "Time Distribution in Update Rule" all key figures are getting split by same way. For e.g. key fig1 has week level data as 100. so after getting split in calday, it is apperaring as (100/7) 14.285 . for every day.
    But i dont want to happen this split for every key figure. For some key figures value "100" should be as it for every field in calday. for e.g. 100 should not get divided by 7 and posted as 100 only for all seven days.
    How can i achieve this? Is it possible if i write formula or routine for particular key figure so that split should not take place for that particular kay figure? Or is there any other to keep exception?
    Please help.
    Thanks

    Hi,
    This is one of the limitation of Time Distribution that you can not have it by individual key figure. Check the below article for more information,
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e1096a-e058-2c10-06b7-c66f9a82a9c8?QuickLink=index&overridelayout=true]
    I think in this case you will have to write individual routine for each key figure instead of Time Distribution approach.
    Regards,
    Durgesh.

  • Authorization check on technical name for statistical key figures

    Dear experts,
    I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
    I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
    What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
    Thanks for any ideas,
    René

    Try something in similar lines as suggested in below link:
    https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
    Regards
    Sreenivas

Maybe you are looking for

  • Abut hte reports

    Hi Guru's, What is meant by CDA storage location? I hav to create report in order to generate report on Ageing analysis for materials in a CDA storage location? How can i? Narasimha

  • Document class Error #2136

    Hi, in Flash CS3 I've this DocumentClass: package {     import flash.display.MovieClip;     public class DocumentClass extends MovieClip {         public function DocumentClass() {             trace("document class created"); This actually works, but

  • Scripting Assistance Needed

    I'm working on a form.  What I need it to do is this: The end user will check a box to add comments.  The comments field is NOT visable until the check box is checked.  Once the checkbox is checked then a text box will appear directly underneath it.

  • I am unable to listen to voice memos via Email.

    When I record a voice memo (i.e. 12 seconds) and send it to my email, I am unable to listen to it, even though I have QuickTime.

  • My apps won't work correctly

    Since the update my iPad doesn't want to open Simpsons tapped out. Not sure if it is a problem with the app or the update