Processes MACUHIC, UTLITE, WlseUHIC, ANIServer, UTManager are down

Hi all, not sure if anyone has run into this problem before, but I'm having an issue with my CiscoWorks 4.0.1 software app. When I look at Critical Message Window I see the following mesages. "Processes MACUHIC, UTLITE, WlseUHIC, ANIServer, UTManager are down" Any help would be appreciated.
James

Hmmm. A shot in the (almost) dark comes to mind - Is your server setup to allow Java updates automatically? CiscoWorks is very dependent on Java behaving as expected (both on the server and client side). An unmanaged Java update could potentially "break" some Java-dependent bits - of which there are many.
When I was asking about manual process starts I was thinking from the LMS admin panel. (Admin > System > Server Monitoring > Processes.)
Finally, I note from the Admin Guide Table 3-2 that the processes you mention have the ANIdbengine process in common as a dependency. Is it running OK?

Similar Messages

BOE XIR2 SP5 All processing servers are down and not starting up

Hi Guys,
My all processing servers are down and not starting up I restarted all the service by ccm.sh
I killed all the servives manually and started again
Still only processing servers go down any clue guys I really stucked here
I cheked logs I got one failed message that is socket failed.
And some strange message
Webi report server: no need to read repositry path:.................
Did any one face this issue before.....
I know you guys help me on this ....................................

Hello,
is these product independent ? Are only DeskI Servers disabled or all like WebI and Crystal too ?
Regards
-Seb.

Tomcat Monitor and AdapterServer1 Processes are Down

Hello All,
I noticed today that the Tomcat Monitor and AdapterServer1 are down. Though it seems no service was impacted. I restarted the processes and the status are as follow:
Tomcat Monitor: Running Normally
AdapterServer1: Program started - No mgt msgs received
What are the likely causes that made the services to went down? How can I prevent a re-occurence.
Kindly find below some details about the CiscoWorks Server:
OS Platform: Windows Server 2003
LMS: 3.0.1
CiscoWorks Common Services: 3.1.1
Campus Manager: 5.0.6
CiscoView: 6.1.7
CiscoWorks Assistant: 1.0.1
Device Fault Manager: 3.0.5
Internetwork Performance Monitor: 4.0.1
Integration Utility: 1.7.1
LMS Portal: 1.0.1
Resource Manager Essentials: 4.1.1
Health and Utilization Monitor: 1.0.0
Thank you in advance.

DFM prior to 3.0.4 was known to cause this problem. There would be errors in the Event Viewer related to buffer space exhaustion, and failed connections to localhost (127.0.0.1). That should have all gone away in DFM 3.0.5. There are no known systemic issues which would cause those daemons to die. Post your TomcatMonitor.log.

A Global Catalog Server could not be located - All GC's are down SBS 2011

I have been searching through these forums and manage to find similar errors but am struggling to find an answer that applies to this me.
I seem to be having a number of issues with our SBS. I believe this was originally domain was previously on a SBS 2003 box before being moved to this SBS 2011 box last year, it has been running fine until yesterday. I cant see anything that has changed then
though.
Everything seems to point to DNS although I am struggling to pinpoint the actual cause. The most worrying is when I try to open something on the SBS such as AD sites and services.
the error is
Active Directory Domain Services - Naming information cannot be located because: The specified domain either does not exist or could not be contacted. Contact your system administrator to verify that your domain is properly configured and
is currently online.
Here is the IPconfig/all from the server
v
Host Name . . . . . . . . . . . . : SBS2012
Primary Dns Suffix . . . . . . . : Contosso.local
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Contosso.local
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network Connecti
on #2
Physical Address. . . . . . . . . : 00-1E-67-39-23-14
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8087:34f0:59f9:6a26%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.35.250(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DHCPv6 IAID . . . . . . . . . . . : 301997671
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-39-46-22-00-1E-67-39-23-15
DNS Servers . . . . . . . . . . . : 192.168.35.250
NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.35.24(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A23E95B8-B5C2-4D88-BDE9-E9F1C2DD3902}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
and here is the nltest
nltest /server:sbs2012 /dsgetdc:contosso.local
DC: \\SBS2012.contosso.local
Address: \\192.168.35.250
Dom Guid: c50b6df3-9d22-4c87-b2a7-adadc4fd5ec1
Dom Name: contosso.local
Forest Name: contosso.local
Dc Site Name: Default-First-Site-Name
Our Site Name: Default-First-Site-Name
Flags: PDC GC DS LDAP KDC TIMESERV GTIMESERV WRITABLE DNS_DC DNS_DOMAIN
DNS_FOREST CLOSE_SITE FULL_SECRET WS
The command completed successfully
As far as I can see everything so far looks ok (highly possible I am missing something) but when I run a DCDIAG it gets messy
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = SBS2012
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Connectivity
......................... SBS2012 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Advertising
Fatal Error:DsGetDcName (SBS2012) call failed, error 1355
The Locator could not find the server.
......................... SBS2012 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SBS2012 passed test FrsEvent
Starting test: DFSREvent
......................... SBS2012 passed test DFSREvent
Starting test: SysVolCheck
......................... SBS2012 passed test SysVolCheck
Starting test: KccEvent
......................... SBS2012 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SBS2012 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SBS2012 passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Contosso,DC=local
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Contosso,DC=local
......................... SBS2012 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SBS2012\netlogon)
[SBS2012] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SBS2012 failed test NetLogons
Starting test: ObjectsReplicated
......................... SBS2012 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,SBS2012] DsReplicaGetInfo(PENDING_OPS, NULL)
failed, error 0x2105 "Replication access was denied."
......................... SBS2012 failed test Replications
Starting test: RidManager
......................... SBS2012 passed test RidManager
Starting test: Services
Could not open NTDS Service on SBS2012, error 0x5
"Access is denied."
......................... SBS2012 failed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:27:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:32:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:37:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:42:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:47:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:52:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:09
Event String:
Driver EPSON WorkForce 645 Series required for printer EPSON WorkForce 645 Series is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver FX DocuCentre-IV C2270 PCL 6 required for printer scanner - 212 Manukau Rd Epsom is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver HP ePrint required for printer HP ePrint is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:11
Event String:
Driver PDF Complete Converter required for printer PDF Complete is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:14
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:57:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:02:33
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x00002724
Time Generated: 07/12/2013 09:03:32
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
An error event occurred. EventID: 0x0000041A
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on the local machine encountered a network error. The error was: 0x 2.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on this computer is shutting down. See the previous event log messages for reasons.
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:45
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:07:33
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:12:34
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0xC00038D6
Time Generated: 07/12/2013 09:16:24
Event String:
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:17:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:22:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
......................... SBS2012 failed test SystemLog
Starting test: VerifyReferences
......................... SBS2012 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Contosso
Starting test: CheckSDRefDom
......................... Contosso passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Contosso passed test CrossRefValidation
Running enterprise tests on : Contosso.local
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... Contosso.local failed test LocatorCheck
Starting test: Intersite
......................... Contosso.local passed test Intersite
I found a few people who have had similar issues that was caused by the "netlogon" service being paused or stopped but in my case it is set to automatically start and is running.
I have also posted this to serverfault (cant post links yet serverfault.com/questions/522691/a-global-catalog-server-could-not-be-located-all-gcs-are-down) added as there may be info there that may help.
Thanks for taking the time to read this, hopefully someone out there has come across this before or can offer something in regards to the next steps I should take.

Some troubleshooting ideas:
0. Check if the DCs can resolve each other using their DNSHostName. If not, this indicates some DNS misconfiguration
-- you need to fix that first.
1. Check if the both the DCs are pointing to the same DNS server (or DNS servers that are replica of each
other). Run: "ipconfig /all" and check its output. If not, correct the DNS client settings and run dcdiag after sometime.
2. Check if dynamic updates are "turned on" on the DNS server.
3. Try re-registering the DCs SRV records by either restarting netlogon service or by running the following
command:
nltest.exe /dsregdns

LMS 4.0.1 DCRServer and UPMProcess are down

Hi,
I have LMS 4.0.1 installed on Windows Server 2008 standard SP2 running on VMWare with memory 8GB. We have problem about when access web conole. It show that "DCRServer is down or inaccessible" and "Processes UPMProcess are down ". But if we try to run "pdshow DCRServer". We found that service already install. Could you please help me for solve this problem.
Thanks for any help,
Udom N.

Hi ,
Found some errors and exception in the log..
We need to follow the below steps to fix the issue::
-we need to re-initialize the ANIdatabase ::
1.stop the daemon manager :
/etc/init.d/dmgtd stop
net stop crmdmgtd
2.Go to : /opt/CSCOpx/bin/ and issue the command :
Run the below command:    /opt/CSCOpx/bin/perl dbRestoreOrig.pl dsn=ani dmprefix=ANI
windows::
NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
3.Start the Daemon manager ::
/etc/init.d/dmgtd start
net start crmdmgtd
***IMP***   Re-initialize the ANI database will not lose any of the history information of the device. Also ANI database does not contain any historical information as soon as the above steps are complete you need to run and new DATA COLLECTION followed by User tracking Acquisition and then check the issue.
Data collection:: Go to Admin > Collection Settings > Data Collection > Data Collection Schedule   under "start Data Collection" > For "All Device" >> click "START"
User tracking :: Inventory > User Tracking Settings > Acquisition Actions
hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ****

BI presentation Services are down

Hi Gurus,
My Presentation services are down and i am not able to start the same. I am receiving below error
File:cachemgr.cpp
Line:287
Location:
saw.sqlNodeCacheMgr.loadCatalog
saw.webextensionbase.init
saw.sawserver
ecid:
[OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
ecid:
Please help
Sumit Agrawal
Edited by: sumit_agr on Jul 26, 2012 7:59 PM

Try fully restart (below procedure for OBIEE "Simple" installation on Linux)
Stop
1) Stop OBIEE processes (C++ components) : [MiddlewareHome]/instances/instance1/bin/opmnctl stopall
2) Stop Weblogic : [MiddlewareHome]/user_projects/domains/bifoundation_domain/bin/stopWebLogic.sh
3) Confirm that Weblogic is not running: ps aux | grep java
4) Optionaly if Weblogic process still running: kill -9 procesID
Start
5) Start OBIEE Services (C++ components): nohup [MiddlewareHome]/user_projects/domains/bifoundation_domain/bin/startWebLogic.sh
6) Close putty session and wait until Weblogic is up. -> you can check it in user home: e.g. /home/obi/nohup.out : log should end with : <Server state changed to RUNNING> <Server started in RUNNING mode>
7) Start OBIEE (C++) processes : [MiddlewareHome]/instances/instance1/bin/opmnctl startall
8) [MiddlewareHome]/instances/instance1/bin/opmnctl status -l     Verify that all processes are running

Except JSP Agent, other web components are down.

In my R12 Vision instance, Except JSP Agent, other web components are down. How can i make it up & running? Please help me.
Web Components Status
PL/SQL Agent Down
Servlet Agent Down
JSP Agent Up
Discoverer Unmonitored
Personal Home Page Down
TCF Down
Thanking you

As applmgr user, please do the following:
- cd %INST_TOP%\apps\<SID>_<hostname>\admin\scripts
- Issue "adopmnctl.sh start" to startup the components
- Issue "adopmnctl.sh status" to verify the status of each component, you should get something similar to the following:
Checking status of OPMN managed processes...
Processes in Instance: PROD_db2.db2.domain.com
-------------------+--------------------+---------+---------
ias-component      | process-type       |     pid | status
-------------------+--------------------+---------+---------
OC4J               | oafm               |    3800 | Alive
OC4J               | forms              |    2528 | Alive
OC4J               | oacore             |    3112 | Alive
HTTP_Server        | HTTP_Server        |     172 | Alive
ASG                | ASG                |     N/A | Down
exiting with status 0
ERRORCODE = 0 ERRORCODE_END

Infrastructure portal components are Down!

Hi
My Infrastructure portal components are down.. I want to make it UP.
D:\testWAMS\opmn\bin>opmnctl status
Processes in Instance: Ora10gINF.mngnet148083d.ad.infosys.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | OC4J_SECURITY | N/A | Down
HTTP_Server | HTTP_Server | 2388 | Alive
OID | OID | N/A | Down
DSA | DSA | N/A | Down
and OID is also Down. what might be the reason? can you give me the valuable inputs for the same..
Regards
Vijaya

The AS forums category is here:
http://forums.oracle.com/forums/category.jspa?categoryID=193
You should at least check if database, that hosts AS repository, and listener are up.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Help me to solve this issue: 50% of servers are down .

Hi folks,
I am new in OBI field and when I installed OBI 11g on my system everything is working fine except analytics URL:( http://localhost:7001/analytics ) its not working.
nearly when I checked my ( em ) URL I got another issue Admin server is up and remaining are down, also I changed root. proprieties file by changing username and password.
Please anyone can help to solve this problem ?
And also how set oracle_instance (my obi path: E:\\BI11g\ ....... etc).
Thank you

Hi,
thank u for your quick reply...
i tried the way u said .. then it is not calling bean .. so do u know what may be the problem? for getting faces i did the following steps
1. create a jsp page with jsf functionality
2. create a bean
3. edited faces config by adding the managed bean
is there any thing more required ?
then is there any good ide (light weight) for jsf ?

Is anyone else having trouble with Creative Cloud Tonight? ALLLLL Applications are down. None are working.

I have verified with at least 5 other people that all their applications are down and no one can sign in to the creative cloud on their desktop. I am experiencing the exact same thing. It started with Lightroom and then just stopped. I was able to just log into photoshop, but i can confirm lightroom is def not working any longer after the upgrade 2015 the other day. its horrible.

I can still launch applications, but for some reason the CreativeCloud app is hung on a network request.
I was able to force quit the Creative Cloud app, then relaunch it, and it is working.
Lightroom and Photoshop launch, but LR is hanging for about 20 seconds in the splash screen (when it normally does not).
So yes, there appears to be some sort of network/server issue with Creative Cloud right now.
But I can't find any errors listed in their status pages, so it may only be a slowdown due to a network issue outside the servers.

Front end and console ports are down for switch WS-C3750X-48PF-S

We have a switch WS-C3750X-48PF-S in the stack and front end and console ports stopped working and are down.
I have tried to replug power cable but this didn't help, please let me know if I could replug stack power for this switch without outage of other switches in the stack, since switches are connected into the ring
Please let me know what might be the possible root cause
#sh switch stack-ports
  Switch # Port 1 Port 2
    2 Down Ok
    3 Ok Ok
    4 Ok Down

Hello,
There is a problem with the stacking connection between switch 4 and 2. Can you try replacing the stacking cable between these switches?

925685 - Approval process is not triggered after documents are added

Hi there,
I was wondering if anyone found already a solution for the following problem.
According to SAP Note: 925685 - Approval process is not triggered after documents are added.
Within our SAP application, we want to approve purchase orders for departments based upon the document total.
I was very astonished that employees are able to add a PO which will not trigger an approval stage and after the document is added, they have the possibility to change the document and at the update moment no approval will be started even if the document meets the approval requirements.
Therefore I really want the flexibility to give users the possibility to change their PO.
Meanwhile, documents which are added under approval, are also locked for changes, although this is another question it is also pretty annoying!
I hope anyone has already found a method or work around for the stated problems above.
(We are using SAP 8.8 PL 20)
Thanks in advance.
Kind regards,
Marcel

Hi Kambadasan,
Thank you for your reply
I'm sorry but I know how the approval templates work and they are configured correctly, however as SAP also mentioned in their own Note, this is due to the lack of SBO that SAP has such behaviour.
Hi Gordon,
Thanks for your reply.
Unfortunately I have not found the post you mentioned...
I will post my issue alson on the topic you mentioned.
Hopefully they found a solution or maybe version 8.81 will solve the problem.
Thanks a lot!!
Kind regards,
Marcel

Why the Fibre uplink ports are down state even after giving no shutdown command at the interface

Hi
My Predecessors brought 2 CISCO 3750 switches and implemented LACP on these core switches. Due to looping in the network the Fibre uplink ports GigabitEthernet1/1/3 and GigabitEthernet2/1/3 are down (I think these uplink ports are mirrored in the LACP concept)
Please see below from the configuration.
I logged into the core switch and went to this particular interface GigabitEthernet1/1/3 and I gave the following command and still the port is in the down state after I gave no shutdown command. Do I need to give the same no shutdown command at interface GigabitEthernet2/1/3 as well ?
Switch-Core1(config) interface GigabitEthernet1/1/3
Switch-Core1(config-if)#no shutdown
Switch-Core1(config-if)#
Please see below After no shutdown command given still these 2 Gigabit fibre uplink ports are down.
GigabitEthernet1/0/20 unassigned YES unset up up
GigabitEthernet1/0/21 unassigned YES unset down down
GigabitEthernet1/0/22 unassigned YES unset down down
GigabitEthernet1/0/23 unassigned YES unset down down
GigabitEthernet1/0/24 unassigned YES unset up up
GigabitEthernet1/1/1 unassigned YES unset up up
GigabitEthernet1/1/2 unassigned YES unset up up
GigabitEthernet1/1/3 unassigned YES unset down down
GigabitEthernet1/1/4 unassigned YES unset up up
Te1/1/1 unassigned YES unset down down
Te1/1/2 unassigned YES unset down down
GigabitEthernet2/0/1 unassigned YES unset up up
GigabitEthernet2/0/2 unassigned YES unset up up
GigabitEthernet2/0/3 unassigned YES unset up up
GigabitEthernet2/0/4 unassigned YES unset down down
GigabitEthernet2/0/5 unassigned YES unset up up
GigabitEthernet2/0/6 unassigned YES unset down down
GigabitEthernet2/0/7 unassigned YES unset down down
GigabitEthernet2/0/8 unassigned YES unset up up
GigabitEthernet2/0/9 unassigned YES unset up up
GigabitEthernet2/0/10 unassigned YES unset down down
GigabitEthernet2/0/11 unassigned YES unset down down
GigabitEthernet2/0/12 unassigned YES unset down down
GigabitEthernet2/0/13 unassigned YES unset down down
GigabitEthernet2/0/14 unassigned YES unset up up
GigabitEthernet2/0/15 unassigned YES unset up up
GigabitEthernet2/0/16 unassigned YES unset up up
GigabitEthernet2/0/17 unassigned YES unset up up
GigabitEthernet2/0/18 unassigned YES unset up up
GigabitEthernet2/0/19 unassigned YES unset down down
GigabitEthernet2/0/20 unassigned YES unset up up
GigabitEthernet2/0/21 unassigned YES unset down down
GigabitEthernet2/0/22 unassigned YES unset up up
GigabitEthernet2/0/23 unassigned YES unset down down
GigabitEthernet2/0/24 unassigned YES unset up up
GigabitEthernet2/1/1 unassigned YES unset up up
GigabitEthernet2/1/2 unassigned YES unset up up
GigabitEthernet2/1/3 unassigned YES unset down down
GigabitEthernet2/1/4 unassigned YES unset up up
Te2/1/1 unassigned YES unset down down
Te2/1/2 unassigned YES unset down down
Port-channel1 unassigned YES unset down down
Port-channel2 unassigned YES unset down down
Please let me know if I am doing something wrong .Please post me some tutorial to sort this.

It is possible you are overloading that little 4215. If that is the case you should also be seeing "missed packet percentage" messages in your events.
How much traffic is your 4215 getting? Those sensors will start to drop packets for inspection at about 30 Mb/s.
- Bob

How to know whether Cost Managers are down in 11i.

Hi,
Is there a way to find in 11i as an Oracle apps DBA ,whether the Cost Manager,Lot Move Transaction,Material Transaction are down.
Thanks
-Ganga

Hi,
Query MTL_INTERFACE_PROC_CONTROLS_V to get the status from the backend -- Refer to https://etrm.oracle.com for details.
You could also refer to (Note: 112146.1 - Troubleshooting Interface Managers).
Regards,
Hussein

Processes MACUHIC, UTLITE, WlseUHIC, ANIServer, UTManager are down

Similar Messages

Maybe you are looking for