Processes (Uncompile) When Using Arrow Navigation ?? Anyone Had This ?

Has one experienced page processes not working after you have scrolled through your processes using the arrow navigation buttons ? This doesn't always happen but we have had it consistently happen enough that I was wondering if anyone had this problem. To fix this, we go back through and just re-save all of our processes. Any thoughts on this appreciated.
Thanks,
Tom

Scott,
We are using 3.0.1.00.08. The symptons are the following:
We edit or are scrolling through the page processes using the navigation arrows. May or may not edit one of the processes. When we run our application again, the Automated Row Fetch or Automatic Row Processing Throws a PL/SQL Error on the page display. Sometimes it just takes going to the process and just RE-SAVING IT and it works. As in trying to pin point this problem, it is hard to replicate but has happened enough that you notice something is not right. The scrolling is the only thing some of us developer do differently. Where one developer just selects the process to edit while another may just scroll through the processes. Do you get a sense of what I am trying to explain ? Also, had a problem with field entry data items are cleared as part of a Automatic Row Process where we put in a Primary Key page item to put the result and for some reason it gets cleared. Any ideas ???
Thanks,
Tom

Similar Messages

My MacBook can find my wifi says it has perfect signal and it's connected. But there is no internet and I've have had this same problem at my house my friends and wifi source I use. Has anyone had this problem or can help me with this thanks

i have a MacBook pro. I'm trying to connect my Mac through wifi at my house, it shows my router says it's connected with full signal yet I have no internet. So I thought I would try it at my friends house but I had the same problem. the Internet connection and wifi were on, as our iPhones were working through wifi. And my friends Mac works via wifi at my house. Just mine dosnt has anyone had this problem or can help me with this problem thanks.

Try this.
    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204

My iPod 5th generation charger doesn't work but it says it's charging. When I use another person'a charger, the iPod charges fine. Has anyone had this problem?

My iPod 5th generation, The charger doesn't work but it says it's charging. When I use another person's charger, the iPod charges fine. Has anyone had this problem?

Yes, the Lightning cables do fail sometimes. They are covered by the same one-year warranty as the iPod
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Still Having Problem with Battery Overheating with Car Dock/Charger when using Maps/Navigation

I'm having a problem with the battery overheating when using Google Navigation in the OEM Samsung car dock and car charger. On a trip last weekend, I started off with a fully charged battery (because posts on other sites have complained that the Charge cannot keep up with the power draw of the Google nav app while using the car charger). About an hour into my trip, I got a message that the battery was overheating and to unplug the charger which I did. I then had to contend with the screen going out because it was running on the battery. I let the phone discharge to about 70% then tried the car charger again. Within a few minutes, I got the same overheating message. It was not an overly hot day and the car A/C was set at 68 degrees.
This morning (with the battery at about 85%) I tried to use the Navigation without the car dock while charging and got the same results...the phone battery overheated and I had to unplug the charger. The battery temperature reached 116 degrees. (also, the battery level was also dropping while using the Maps or Nav application even though it was hooked up to the car charger).
I'm very disappointed with this situation since I was hoping I could replace my old Garmin GPS with the Charge. But between the phone dimming the screen while running on battery, and having a depleted battery in the phone at the end of the trip, its just not a viable option. I really like this phone, but I'm running against the "return" clock.
Any ideas?
Could this be a software problem that will be corrected by an update in the future?
fyi: other Charge problems in the last 5 days:
- dropping audio on calls to other Verizon phones.
- use of camera flash causing the phone to reboot.
(I do have the 'class 4' 32gb card in my Charge)
Thanks in advance,
Rich

Jerry:
Yes, the phone is charging while in the car dock. I confirmed it both under the "about phone-status-battery status" menu and by my battery widget. By watching the battery widget, I also noticed that the voltage steadily increased over the ride home. It started at about 3.90 volts and ended at 4.02 volts. I don't know if that is significant. This time the battery did not overheat. The Max temp was 110 degrees, but no notice to disconnect came up. This might be because the sun was behind me on the drive home rather than beating down on the dash like it was this weeked.
I've ordered a cheap universal dock from Amazon for about $15.00 which clips onto the a/c vent. I want to see if this keeps the temperature down. If this works, I can still return the fancy-schmantzy Samsung OEM car dock. (The car-dock interface wasn't that impressive anyway).
Please let me know if the volt change means anything.
And thanks again for your help!
Rich

When I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

when I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

Hi Terence, When I am uploading photos from a memory card,not all of the photos show up on I photo as a photo image, but show up as a dotted square line. For example, I just added 12 photo from two days. The first day had 5 photos, but only 4 show up as images, then there is 1 as dotted a square. The next day, there 7 images, with only 4 showing up as photos, and three as the dotted squares.
I am using I photo 11, 9.1.1.
Thank you

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Hi
SlideShow in iDVD has a 99 photo limit - more than this and all sorts of error occures.
One can have more than one SlideShow on a DVD = X times 99 photos.
or assemble SlideShows in a movie editor (no limit at least not under 650 photos)
(only limit is Time in iDVD (movie time + MENU time --- 60 min or 120 min on SL-DVD and about twice on DL.-DVD )
I use
• iMovie up to HD6 - or -
• FinalCut any version
As they will give a better quality than iMovie'08 or 09 or 11 can do.
Yours Bengt W

My iphone screen showed green colours then reset when I went into facebook after a random email address had replaced mine? I reset it, then it went back to normal but has anyone had this problem?

My iphone screen showed green colours then reset when I went into facebook after a random email address had replaced mine? I reset it, then it went back to normal but has anyone had this problem?

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?

The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

When I copy/paste a paragraph from a PDF doc, it pastes with no spaces between words. How can I fix this? I've searched everywhere for the solution but didn't find anyone had this issue.

When I copy/paste a paragraph from a PDF doc (onto Facebook status bar, for example) it pastes with no spaces between words. I.e: "The manhadajugofcoolwaterand offeredmeadrink." How can I fix this? I've searched everywhere for the solution but didn't find anyone had this issue. I'm new to Apple so any help will be much appreciated. Thanks!

I can't speak about this occurring with FaceBook since I don't use FaceBook, but I see the same type of thing when I copy and pasted from websites. It doesn't always happen and I cannot find any particular set of circumstances under which it occurs or does not occur.
I am merely responding to let you know that it happens to me as well and I have seen no way to correct it. I'm not so sure that there is a way to correct in in that it may have something to do with how the original text is formatted in the PDF or on the website and how it eventually "fits" into the text field or the area in which it is pasted.

My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this code appear, and what did they do to solve it?

My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this error code appear for them before and how were they able to fix it?
Thank You

See SIMPLE easy solution for 1015 3094 3014 21 error

When I try download new os 5.1.0 on my iPhone 4 I get this error message "stopped (err = -3259)" after it has downloaded. Has anyone had this problem and if so what is the fix.

When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download. I have tried 3 times, it takes about 8 min. to download the 790.7 MB file. Has anyone had this problem and what is the fix?

See "error -3259" here.

Error: Couldn't unmount disk -- when trying to verify/repair external hard drives. Has anyone had this problem and solved it?

I have a number of hard drives that my Mac Book Pro no longer 'recognises' at least for very long. When I turn them on the deskstop icon shows up but then shortly afterwards I get a message saying that it has been unplugged incorrectly. I haven't unplugged it any of them. When I try to run very/repair disk before they disappear I get the error in the subject line above. Has anyone had this problem and if so how did you rectify it?

The drive is malfunctioning and needs to be replaced, or you have some other hardware fault.
Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

Is it possible to post a sample page some place for us to try out (dropbox or acrobat.com)? Is your Acrobat updated? What version of WORD are you using?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

When I statred iTunes match I lost some of my music and all my playlists, has anyone had this problem? And can I restore it?

When I statred iTunes match I lost some of my music and all my playlists, has anyone had this problem? And can I restore it?

Restore your media from the backup of the computer created prior to restoring the computer.
You did create a backup, correct? Not doing so would be extremely unintelligent.
iOS devices are NOT backup devices.

Processes (Uncompile) When Using Arrow Navigation ?? Anyone Had This ?

Similar Messages

Maybe you are looking for