Processing a dimension error message failed to expand K2 function

Hi SAP gurus,
For doing processing of a dimension i am getting the error message,
Failed to expand k2 funtion for dimension P_ACCT'S member formulas
Members invalid On Dimensin (RPTCURRENCY:LC)
The error message is only when i am using FORMULA in a dimension, with out FORMULA its processing successful.
I checked with the development environment its working fine even i use FORMULA. But in production its giving the above error message.
How to Resolve the issue in production server.
Thanks & Regards
Swathi Roy

Hi,
Please do the following on BPC Server:
1). unregister the following dlls :
K2processing.dll, K2processingInternal.dll and K2Logic.dll
All the above files will be in C:\.. \BPC\Websrvr\bin
(Folders)
you have to un each dll saparately at DOS prompt.
regsvr32 /u C:\BPC\Websrvr\bin\k2logic.dll
2). re-register the same dlls :
(K2processing.dll, K2processingInternal.dll and K2Logic.dll)
Running the DOS command for each dll
- The dlls are located in C:\BPC\Websrvr\bin folder
regsvr32 C:\BPC\Websrvr\bin\K2Logic.dll
I hope this helps
I unregistered the K2processingInternal.dll and then register again, but the problem was not resolved.
and i am not able to find K2processing.dll, K2Logic.dll in both production and development servers.
in development server also we cant find the above dll files, but its working fine in dev server
The problem is in production server only if i use FORMULA.
please help me to over come the issues
Thanks & Regards
Swathi Roy

Similar Messages

Mac OS X 10.6.8, receiving error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted." How to fix?

When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.

You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software.

I'm trying to load my newspaper and I keep getting the error message Failed to Load Kiosk, I've done a restore but no joy - any ideas?

I keep getting the error message Failed to load kiosk when trying to upload my copy of the Times, I have done a restore but that hasn't worked - any ideas how to get the kiosk back and functioning again? All software is up to date.
many thanks

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I have a pc and am using windows 8

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I am using a pc and have windows 8. Please help.

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

I bought the adobe expert PDF. Got error message failed to be converted ?

I bought the adobe expert PDF. Got error message failed to be converted when I tried to convert PDF to Word? What did I do wrong?

See if any of the articles here help: http://forums.adobe.com/community/exportpdf?view=documents
You can also try to contact Adobe Customer Support via http://helpx.adobe.com/contact.html?product=export-pdf
[topic moved to ExportPDF forum]

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

2 error messages - failed to install extention 2.1 and output module 2.1

I just tried to update my Encore CS4 from the Master Suite. I have two error messages " failed to install extention Mgr. CS4 2.1 and failed to install output module update 2.1
Encore will load a new project and save but I can't do anything else like add files before it crashes. Any help please. - Art

This might not apply with En CS4, but there were some issues on install, and on updates in Photoshop. It seems that MS had a bum MSI (Installer) version, and it caused a lot of PS installs and updates to fail. Do not recall any specific error messages. The cure there was to download and install the revised MSI module from the MS site. I would imagine that any MSI module would be heavily Windows version-specific. Take that as a warning to check any very carefully, before downloading and installing. MS is pretty good at having a ReadMe with installation instructions for each such download. It almost always contains the exact versions of Windows, that the file is for. Please read any installation instructions carefully.
This might be worth a look. I do not have a link to the exact page, but a search of the MS site should yield something. I'd search for "MSI," to start.
I just do not recall any issues with En and either installation (on proper systems with updated OS's) or with any updates.
Good luck, and please report your success.
Hunt

Mac app store error message failed download.

When I try to download an app from the Mac App Store I get an error message "failed to download use the purchases page to try again".
How do I fix this problem on OS Mavericks 10.9.4?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Ebook error message: "Fail to write destination file error"

I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

My Mountain Lion install failed for the following reason:
OS X can't be installed on the disk Macintosh HD, because a recovery system can't be created.
The message went on:
Visit www.apple.com/support/no-recovery to learn more.
The page is about a different failure, but I'm assuming the reason for my failure is this one:
The disk has a non-standard Boot Camp partition setup, in which further partitioning was performed after running Boot Camp Assistant, or the configuration that Boot Camp Assistant created was manually modified.
The cure involves erasing the entire HD and starting from scratch, which in my case would involve backing up both the Mac and Windows sides, setting up Boot Camp again, reinstalling Windows XP and recovering everything from backups on both sides. I would rather not have Mountain Lion than go through all that, and I think it's unfair for Apple to expect me to.
Because I don't recall doing anything off-piste when I set up Boot Camp in the first place (for a start, I'm not clever enough), I consider this episode an inadequacy in the Mountain Lion installer. As I won't be using the download, is it possible to get my money back?

Error message: "Failed to open document

Error message: "Failed to open document" received often while trying to open a workbook. This occurs randomly: different PC's receive this error in different workbooks while other PC's succeed in opening same workbook. Can someone advice?

I had same problem when we were modifying few workbooks.
when i had tried to open workbook in discoverer plus it gave me error like what u r getting. after that i opened it in desktop and without doing any changed i saved it and tried to open it again in Plus and it worked. Logic vs Magic !!!!

Scheduling a Deski report fails with error message: "Failed to get property

Hi,
We have created few Desktop Intelligence report. Now when these report are schedules to be refreshed weekly (on Sunday), it fails with the following error message:
"Failed to Get Property"
Have tried to refresh the reports manually in Full Client too but the report fails there too.
Have checked for the connection information. The servers are up and running.
Have tried to re-create the connection and even tried to re-import and export the Universe.
If we rename the report and save it and export, it works fine. Can not try this workaround as have more that 500 reports.
Please suggest.
regards,

Hi Maria,
usually the message "Failed to Get Property" is followed by an item name such as SI_FILE, or SI_VARIABLE, or SI_USE_ORIGINALDS, and so on.
Could you please specify as much information coming from the error message as you can?
Furthermore, is this issue happening with any Desktop Intelligence reports you schedule?
Are the reports using the same Universe?
Which DB are you using?
Regards,
Samanta F.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Error message "Failed to load book because the requested resource is missing" on iPhone

I purchased 3 books in itunes to read on my iphone using ibooks. I have synced and I can see the books in my iBooks bookshelf, but when I try to open them I get an error message "Failed to load book because the requested resource is missing". I have tried opening the book again, deleting and resyncing but nothing seems to work. Any suggestions?

I was having the same probem.
I found success when I shut my iphone down all the way (press and hold power button then "slide to power off")
then started it back up. My phone was linked to my computer at the time, so it went through the sync - not sure if that is important. But, I can now read my books!
Good luck

Processing a dimension error message failed to expand K2 function

Similar Messages

Maybe you are looking for