Processing data packet (no data)

Hi all,
My issue is: I am trying to load data utilizing a custom datasource and a custom function module.  When the job loads it runs successfully but no records are pulled over.  However, I get records using the extractor checkor in the source system.  This is working fine in our production environment (R3) but does not work in our test environment (my sap.) 
Has anyone encounter a similiar problem or can suggest a possible solution?
Thank you.
Rydell

Hi Hari,
Thank you!
There are no start routines, but there is a date selection in the infopackage.  It uses an OLAP variable of the last 7 days.  Everything shows up green except the processing of data packet shows a warning of no data. 
I am confused whether this is a problem on the bw side or the sap side.
Regards,
Rydell

Similar Messages

  • Arrived in BW Processing: Data packet not yet processed

    Hello Gurus,
    Data is being loaded from export datasource (8RL*****) ti 2 data targets
    The overall QM status is red (says processing is overdue)
    The details tab shows
    Extraction: Error occurred
    Transfer(IDoc and TRFC): Error occurred
    Processing (Data packet): Error occurred
       -- Transfer rule: Error occurred
         Bewegungsdaten received.Processing being started
         Message missing(35676 records) : Transfer rule finished
      Update rule (0 records):Missing messages
      Update(0 new/0 changed): Missing message
      Processing end: Missing message
    I checked the LUW in SM58 but didnt find anything.
    I checked infosource (PSA) - one request is in RED, but when i check the data in PSA there are no errors.
    What should I do in this case?
    What might be the excat error.
    Kindly inform.
    Regards,
    NIKEKAB

    Hi,
    Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
    See Dumps in ST22, SM21 also.
    Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
    You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
    S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
    And also check the following things.
    1.Connections from BW to ECC and ECC to BW in SM59
    2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
    3.Check Dumps in ST22, and SM21.
    4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
    5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
    See in SDN
    Re: Loading error in the production  system
    Thanks
    Reddy

  • IDoc looks fine, but "Processing (data packet)" : No Data

    Hi dear all:
    we trying to loading data from R3 ECC 5.0 into BI 7.0. During the loading process, the status keeps "yellow".
    When we checked the Details in the extractor monitor, the message shows in "Transfer (IDocs and TRFC) is "Request IDOC and Info IDoc 1 : Application document posted".
    But the "Processing (data packet): No Data. We have checked on R3 in tcodes BD87 with IDoc number."IDoc entries in tRFC queues" shows red light under section of "IDoc in outbound processing".
    In IDoc entries in tRFC queues, there is not revenant record for this IDoc. Also we used tcode SM37 to check job execution based on the request number of data loading. The job is shown released.
    Can anyone give us some idea about what happened and how can we fix it.
    Thank you very much
    SF

    Geeta,
    Try this...heard there needs to be a setting made in T-code..SMWQR ..
    U have to register the csa*  queue...try getting more inputs on this...this is what I know abt this..
    Hope this helps..
    Regards.
    Nick.

  • Guide me for any way to avoid manual update for processing data package

    Hi sap gurus,
                         I am new to SAP BI.  In my project everyday I have to manually update for processing data packets for an infocube. Can you tell me why it happens that some time data get stuck and we have to do manual update? Is there any possible solution to avoid or correct that? Can we make some kind of Process chains that automatically do these things?
                         Please reply..as it is very irritating to do same thing everyday..
    -Thanks in advance.

    We have program RSARFCEX, which can execute all of them in one go.
    But you can not schedule it in process chain, as you will never know when TRFC will struck. So it will execute without anything if there is no TRFC struck.
    Pravender

  • In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

    In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

    The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

  • How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

    I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
    have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

    Jay del Rosario wrote:
    >
    > How do I troubleshoot installation/distribution of a LabVIEW .exe
    > which processes data using Matlab when it works on some computers but
    > not others?
    Poke around zone.ni.com and
    http://digital.natinst.com/public.nsf/$$Search/ .
    Good luck, Mark

  • SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

    Hello All,
    We are using a two tier architecture.
    Our Corp server calls the refinery server.
    Our CORP MII server uses user id abc_user to connect to the refinery data server.
    The user id abc_user has the SAP_xMII_Dynamic_Query role.
    The data server also has the checkbox for allow dynamic query enabled.
    But we are still getting the following error
    Error has occurred while processing data stream
    Dynamic Query role is not assigned to the Data Server; Use query template
    Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
    Thanks,
    Kiran

    Thanks Anushree !!
    I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
    But we even needed to add the role to the data server.
    Thanks,
    Kiran

  • Good for processing data from a web application?

    It seems like all the examples provided for ASA are about processing data streaming in from IoT or mobile apps. Is ASA appropriate for processing data from websites? For example, I have a multi-tenant web API and I need to roll up usage and calculate billing
    for my clients. My clients can upload resources with me which I store in blob storage. But blob storage gives me no way of knowing how many resources have been uploaded and how long I have stored them. Would ASA be a good fit for calculating these figures?

    I have solved this task in folowing way:
    I have add ADF read only form to my page (which I need anyway). The form displays data selected in the graph (using another VO, which is linked to graph VO). Command button calls my managed bean, which handles the data via the bindings executables (view iterators).

  • Email with attachments QPAC: setting "From" using process data doesn't work

    Hi,
    I trying to set the "From" in the Email with attachments QPAC from a process variable, let's call it "mailagent", which is of type xs:string.
    So I use a set value QPAC, which sets the "mailagent" variable to "[email protected]". The workflow then continous with the Email QPAC.
    Which stalls and throws the following exception:
    javax.mail.MessagingException: 501 Syntax error, parameters in command "MAIL FROM:<{$/process_data/@mailagent$}>" unrecognized or missing
    Hrm. I thought, I had already used the Email QPAC this way.
    Is there some kind of magic to apply to the Email with attachments QPAC in order for it to accept process data in the "From"?
    Steve

    Yes, I'm sure, it worked for us to. But it obviously no longer does.
    Yes, "mailagent" definitely is a variable of type string, though it's of type
    xs:string. I'm no longer able to create variables, which don't feature the
    xs namespace. Which is quite confusing as I've got absolutely no idea, what the
    xs is used for.
    We are using LiveCycle Workflow 7.2.1, the Email QPAC is 7.0.2. Is this the latest version?
    Steve

  • Difference between Service data objects and process data object

    Hi
    Can anybody tell me what is the difference between SDO (Service Data Objects) & PDO (Process Data Objects).I am using 2 port PCI-CAN series 2 card.
    If anybody knows the answer then please reply.
    Thanking You

    Hi,
    See the online help file from our NI CANopen Library for LabVIEW for some basic informations about SDOs and PDOs.
    More information should be available from the web.
    DirkW
    Attachments:
    lvcanopenvhelp.zip ‏154 KB

  • How to process data in the past based from data in the present

    hello guys,
    i have a problem in my labview programs. how to process data in the past based from data in the present ?
    i have a formula self-organizing maps
    this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula  .it means the smallest value is 2, "2" from weight [2 2] in file attached.
    and then it will be in other formula
    it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
    and the weight will be  [1.5 2 2 ] in matrix
                                              1.5 3 5
    I would appreciate any input/help on solving this
    thanks
    Attachments:
    dika.vi ‏16 KB
    weight.txt ‏1 KB
    data .txt ‏1 KB

    Hi Ronny Hanks,
    Moving your records from internal table into the database table depends upon various scenarios :-
    1. If you use INSERT statement.
    INSERT <database_table> FROM TABLE <internal_table>.
    But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
    INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
    In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
    2. If you use UPDATE statement.
    UPDATE <database_table> FROM TABLE <internal_table>.
    This will update the existing records in your database table from the internal table.
    3. If you use MODIFY statement.
    MODIFY <database_table> FROM TABLE <internal_table>.
    This statement works both in combination of INSERT & UPDATE statements.
    Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
    Hope this solves your problem.
    Thanks & Regards.
    Tarun Gambhir.

  • TO Get  Ensuring Exactly Once Processing data from sender soap adapt

    To XI Specialists
    Now Im trying to get Ensuring Exactly Once Processing data from sender soap adapteter.
    My plan is that send data from Receiver adapter, to Sender adapter by SOAP.
    (1st interface is ABAP to Soap "BE", 2nd interface is Soap to File "EO")
    Sender SOAP adapter will returun Ensuring Exactly Once Processing data.
    (see SAP HELP, http://help.sap.com/saphelp_nw70/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm )
    AND I want to get Ensuring Exactly Once Processing data, I want to determine what to do in ABAP proxy.
    SO I made and tested 2interface. but error occuered.
    I checked the error, and Now I know what is the cause.
    The cause is that Ensuring Exactly Once Processing data didnt enter the payload, at Receiver Adapter.
    1st interface coulnt get the payload data, so mapping error occuered....
    Please give me help,
    <b>"How to get Ensuring Exactly Once Processing data From Sender SOAP ADAPTER"</b>
    or
    <b>"How to enter Ensuring Exactly Once Processing data into Payload of Receiver SOAP ADAPTER"</b>
    and more excelent way....
    our XI is version7.0 and SP10
    Please teach me your wisdom!
    Naoki Kurihara

    I seeked and I noticed that
    maybe I catched the message but the message dont have payload.
    so I got no_payload error.
    I checked SAP note.
    I noticed, no_payload error will be managed to nomal message at SP13....
    my XI is SP12....
    I ll seek for another way!!
    Thank you! noaki

  • BPM Process Data Object vs Managed Bean

    I need to store an ID which is the primary key of a record in a database in my BPM process so that I can use that to set the bind variable on my view object query. Is it better to store this ID in a process data object or in a managed bean and why is one better than the other?

    I suggest to do the other way.
    Store the BPM Process Instance Id in the Database when you create data in the table.
    Pass this Instance Id to the VO query parameters.
    You can create a page binding of this instance Id from the Data Controls
    I am assuming there is a 1-1 relation between your BPM Process and Database Row.

  • Oracle BPM and JMS Queue: How to associate data from Map Messages to Process Data Objects?

    Good Day!
    I'm currently working on a project wherein it tries to get data from a JMSqueue Map Message being populated by CEP.
    After CEP pushes some data in the JMSqueue. I have BPM configured with a JMS adapter to look up whether there are any messages to be processed upon.
    Inside BPM, I want to know how can I correlate the data from the Map Message to my Process Data Object.
    For example, If I have a Map Object wherein it has 3 attributes:
    FirstName:String
    LastName:String
    Age:int
    What is the expression I need to use inside Oracle BPM Data Association screen in order to map the data from the Map Messages into my process data objects?
    Thanks!
    Regards,
    Jeff

    Any ideas? Thanks!

  • BPM Process Data Object of type Business Objects

    I am using JDeveloper11.1.1.5 and using BPM Project. I have created a business object of type Quote and I want create a Process data object of type Quote. But I don't find 'Browse more types' button on Create data object wizard. I am stuck at this place. Is there any work around or do I need to revert to older version of Jdeveloper.
    Regards
    Sunil Mandrawadkar

    Have you tried with following forum.I think you can find answer quickly from that.
    Business Process Management Suite

  • I want to run SSIS package every time based on last time job processed data time.........

    Hi all,
    i have SSIS package ..its needs run every day .for that we were schedule a job for ssis..
    but we need when package going to run that time we have to take data, besed on last time processed date..for that am using msdb data base to get process date ..but am not yet schedule a job am going to do 1st time..
    insde the package am using this query using execte sql task 
    SELECT     CASE WHEN DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate()) = 0 THEN 30 ELSE DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate()) END   AS Dates
    FROM            dbo.sysjobhistory AS H INNER JOIN
                             dbo.sysjobs AS J ON H.job_id = J.job_id
    WHERE        (H.run_status = 1) ..
    if job already ran means its was working fine.if job not yet scheduled means its giving error...
    pandiyan

    Try this one on:
    SELECT COALESCE(dates,fallBack) AS dates, name
    FROM (
    SELECT 30 AS fallBack
    ) b
    LEFT OUTER JOIN (
    SELECT CASE WHEN DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate()) = 0 THEN 30
    ELSE DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate())
    END AS Dates,
    j.name
    FROM dbo.sysjobhistory AS H
    INNER JOIN dbo.sysjobs AS J
    ON H.job_id = J.job_id
    WHERE H.run_status = 1
    GROUP by j.name
    ) a
    ON b.fallBack = b.fallBack
    You might want to consider filtering on j.name or j.job_id to get the info for the specific job.

Maybe you are looking for