Processing effects to end of view while in edit mode is missing

Back when Audition was Cool Edit Pro, they had an option while adding effects while in Edit Mode that would let you highlight a section of the waveform, add an effect say like an echo, then would allow to process that effect to the end of view.  That was a beautiful thing.... Since Adobe took over, that has been missing.  I can't believe I was the only one out there that used this option.  It was a HUGE time saver!!!  Say like I want to add an echo to only one word.  I could highlight that word, add the echo, then have the word echo past the highlighted area until it faded completely, or reached the end of the view.  Now, I have to highlight that word, cut and paste it into a new track, then go back into edit mode, extend silence to the end of the file, add the echo effect, go back to multitrack mode and then mixdown the 2 files.  This is rediculous and time consuming.  Am I missing that option somewhere or does it not exist??  Or maybe someone out there has a better way to do it???

yes definately this should be added back

Similar Messages

  • What happened to processing an effect to end of view while in edit mode????

    Back when Audition was Cool Edit Pro, they had an option while adding effects while in Edit Mode that would let you highlight a section of the waveform, add an effect say like an echo, then would allow to process that effect to the end of view. That was a beautiful thing.... Since Adobe took over, that has been missing. I can't believe I was the only one out there that used this option. It was a HUGE time saver!!! Say like I want to add an echo to only one word. I could highlight that word, add the echo, then have the word echo past the highlighted area until it faded completely, or reached the end of the view. Now, I have to highlight that word, cut and paste it into a new track, then go back into edit mode, extend silence to the end of the file, add the echo effect, go back to multitrack mode and then mixdown the 2 files. This is rediculous and time consuming. Am I missing that option somewhere or does it not exist?? Or maybe someone out there has a better way to do it???  Or better yet....ADD THAT OPTION BACK IN!!!!

    yes definately this should be added back

  • While in Edit Mode in Moodle - page content does not render at all, but I am able to display the underlying HTML code. Happens only after upgrade to Firefox 11.0.

    While in edit mode in the Moodle course management system, the Page Content window should display the page as it will appear to the user. If you click on the "Edit" button, you are able to view the HTML code for the page. However, when you return to the normal display mode, the page is blank. This has occurred after the upgrade to Firefox 11.0. Page is normally rendered in Internet Explorer.

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    See also:
    *http://kb.mozillazine.org/Error_loading_websites
    *https://support.mozilla.org/kb/Error+loading+web+sites

  • Can't view photos in edit mode

    Hello,
    I just upgraded to iPhoto '08, and while I can view all my thumbnails ok, the photos themselves won't load at all in edit mode.
    I was using iPhoto to try to"jumpstart" my iWeb (per my other help request in another topic) when I noticed this.
    I have Leopard 10.5.2, iPhoto 7.1.2 and a 1.8 GHz processor and 512 MB RAM in my upgraded G4 tower. I tried deleting the preferences file, rebuilding the library file, opening in another account, etc, with no luck. I had even just erased my hard drive and cleanly re-installed Leopard, etc. with still the same problems in both apps. Do I just need to add more memory perhaps? I can't think of anything else...?Does Leopard require much more memory than Panther (which I had before) to run properly?
    Thanks,
    Paul

    I've had the what sounds like the exact same problem with iPhoto '08. I, too, have an upgraded 1.8 GHz G4 (AGP Graphics) running OS 10.5.3 (although the original installation was 10.5.1 and the same problem occurred before the software updates). When I try to edit a photo, the edit window opens but no picture appears. Clicking on the various editing tools and manipulating them (blindly, on a blank screen) shows that editing is actually taking place, and that changes can be saved.
    An earlier post of mine concerned the first problem I noticed since my OS and processor updates; namely, that the DVD player app won't work, but instead returns an error message saying that a valid device could not be found for playback. Several responses to that post seemed to suggest that the ATI Rage 128 video card might be the culprit and that it would need to be replaced. In the past week I've been on the phone or in email contact with tech support people at ATI, Sonnet, Other World Computing, and Apple, the last being the least knowledgeable of all of them, I'm sorry to say.
    The Sonnet guy personally runs a computer just like mine, but with the ATI Radeon 9800 Pro Mac video card. That item costs $209 at OWC. But ATI says it won't work because of the G4's 200 power supply.
    These folks think that the iPhoto problem would be solved by the new video card -- but I'm not yet convinced I want to spend that kind of money to find out. Most also say that the DVD Player issue would be fixed, although the OWC guy says it has nothing to do with it.
    So we're going blind here, with much conflicting expert opinion. I'll keep watching for further discussion.
    cc

  • Can't cut and paste while in editing mode

    While I am actually in editing mode within InContext, I can't seem to cut/paste a line from one paragraph and add it to another. I can cut the line but not paste. I have gotten the below window, but even ctrl-v doesn't work. I can cut and paste from another application into the editable areas.
    I am on a PC.
    Anyone else have this problem?
    Doug

    Hi, I'm the web designer. Here are answers from the client Glenn who 
    is doing the updates.
    He has tried on a PC and a Mac. Works fine for me.
    Is this happening all the time, on each copy and paste? - yes
    Or it's working for a while than it suddenly stops working?
    It did work for a while then stopped. Then yesterday worked once. Then 
    stopped.
    Is this happening on a specific page or on all pages?
    I'm only working on one page..
    Please provide a link to a page where copy & paste doesn't work and
    eventually invite me as an editor (mailto:[email protected]).
    http://www.mullummusicfestival.com/includes/ice/
    ide.html#page=artists.html
    Please help. Thanks STU
    STU
    Graphic » Web Designer
    02 6684 1256
    02 6684 6917
    0431 678 616
    [email protected]

  • Edit mode in a table view with value node

    Hi experts.
    I'm trying to create a table view. This table is based on a structure that is filled with data with a RFC function module retrivening the data from another system.
    The problem is that i'm unable to set it editable. There is for exemple a check box that i need to check / uncheck, but the field is always read only. We don't even go through the method get_i_.
    In the do_prepare_output of the view, i have checked, as below, the view is in edit mode, but still i can't do anything.
    *DAtA lv_str type abap_bool.
    *lv_str = me->view_group_context->is_view_in_display_mode( me  ).
    Any ideas why ?
    Thanks for your time and help.
    Regards.
    AW

    Solved by sending X in IV_ALL_ROWS_EDITABLE.
    cl_thtmlb_util=>translate_selection_mode(
      exporting
      iv_selection_mode    = NODE->SELECTION_MODE
      iv_all_rows_editable = 'X'
      importing
      ev_selection_mode   = lv_cellerator_selectionmode
      ev_edit_mode        = lv_cellerator_editmode
      ev_selection_column = lv_cellerator_selectioncolumn ).
    Edited by: aw_crm on Jun 16, 2011 10:02 AM

  • After effects error: exception occurred while processing effect "Pixelate". ( 25 ::0 )

    I'm using Adobe After Effect CS5.5 and I'm having a problem with the following errow message:
    PROBLEM / ERROR MESSAGE
    After effects error: exception occurred while processing effect "Pixelate". ( 25 ::0 )
    SCENARIO
    It happens when I apply pixelate to text and have the text move onscreen from offscreen...
    To clarify, let's say I apply the "pixelate" effect to text and move it off screen. Then, I place a keyframe and move 10 frames down. Next, I place another keyframe (ten frames past the 1st keyframe), and I move the text to the center of the screen. When I play the comp, the error appears as soon as the text is first visible in the preview window (onscreen).
    I've already tried the following websites, but none of there solutions work:
    http://myleniumerrors.com/2011/03/17/25-0/
    http://www.techyv.com/questions/error-when-reusing-compositions-adobe-after-effects
    Any thoughts?

    I actually got it somewhat working...
    Here's my System Specs:
    Mac Pro
    Processor 2.8 GHz Quad-Core Intel Xeon
    Memory 12 GB 1066 MHz DDR3 ECC
    Graphics ATI Radeon HD 5770 1024 MB
    @Mylenium
    I tried turning off Adaptive Resolution and/or turning of OpenGL. Nothing changed.
    However, when I opened a new comp with only the text layer in question and tried messing with the keyframes, I found out something. If I move the keyframes closer (thus making the animation faster), the error didn't appear. But when I moved the keyframes farther away, the error appeared.
    Ideally, I want the keyframes to move at it's original speed (not faster or slower).
    Any thoughts?

  • Preview is saving all files viewed while online

    I am having several problems with Preview because it saves every single file I view while online, and while conducting research, this ends up being literally hundred of .pdfs some days. How do I turn off this automatic save function? Is it just a glitch in the system or is their a setting somewhere that can be adjusted? It is also saving the files in a folder which it should not be saving them in, but I cannot figure out to change the default folder for this automatic saving that should not be taking place. I have tried changing my default folder in Preferences for both Firefox and Safari, but it does not seem to have any effect on this automatic saving.
    If I can't get this to stop, then I need to make Adobe Acrobat my default viewer. I have tried going into the Preferences of Firefox and Safari, but I still keep getting Preview popping up when I try to view .pdfs.
    I am using Firefox verison 2.0.0.14 and Safari 3.1.1
    Any suggestions would be greatly appreciated.

    You don't want to view them in Preview or Acrobat either one, that requires downloading them, but...
    http://www.macosxhints.com/article.php?story=20030325010528818
    Of course you can configure Acrobat 7/8 to view them online if you wish...
    http://kb.adobe.com/selfservice/viewContent.do?externalId=331040
    http://kb.adobe.com/selfservice/viewContent.do?externalId=333545

  • How Do You Apply Process Effects To Multiple Clips In A Multi-Track?

    A multi-track sequence brought over from Premiere, I have over a dozen clips from a funeral service video that need noise reduction.
    But, because it's a process effect, I can only work on one clip at a time. Furthermore, I may need to apply several passes of the NR effect to eliminate the noise without sounding weird.
    How then do I apply that effect (and its parameters) to the rest of the clips in the sequence?
    In Premiere, you can copy and paste effects (and their parameters) from one clip to another. There is no such thing in Audition that I can see.

    Hi, Alex.
    It seems you want to do some broadband de-noise processing. While one can do a noisefloor sampling from one clip and apply it to others (great for when you have multiple takes from the same setup), it may be best to noise sample each individually if the mic has moved position enough to cause the tonal characteristics to change.
    An example would be if on-screen talent is walking in an outdoor location. In one part of the location, a particular section of the clip has a lot of BG traffic noise. Another recording has a fountain in the BG - while it still may have some of the traffic in it, the predominant BG noisefloor is "strong fountain/weak traffic", so like others have mentioned, it makes more sense to make a new BG sampling to match the characteristics of this clip.
    All that being said, here is how you BATCH PROCESS / broadband de-noise a bunch of clips, it's a 4-tiered / 21-step process when starting from scratch.
                                  NOTE: there is a manual cheat after the Batch Processing lesson - skip to that if you wish
    (WARNING - this type of processing is most successful if the file has been EQ'd or gain boosted (if needed) before processing. This is also true for the noisefloor sample. It should be taken from the pre-adjusted clip so that it all matches level)
    1) find / open a source clip that best represents the BG noisefloor you wish to sample as your broadband source for processing,
    then in the WAVEFORM editor window press alt-shift-C to save this selection as a new file - give it a unique name that represents its function
         a. ideally, this selection will be more than 5000 samples
         b. should be free of non-BG noise sounds (Dx, footsteps, mouth sounds, it should sound like a very short ambiance loop)
    2) with your new sample saved and your source clip still open in the UI:
         a. load your noise print file
         b. adjust the Noise Reduction and Reduce by  sliders (I suggest you start with a noise reduction value of 100% with a reduce value of 3 to 6 dB)
         c. under Advanced Settings, set Spectral to 0%, Smoothing to 20, Precision to 7, and Transition width to 2dB - these settings
             are like painting not with a wide brush but with a thinner brush, which means less cancellation of frequencies you want to keep and less artifacting
         d. toggle on/off the Output Noise Only function to see just what you are subtracting in your process - a great way to make adjustments until your
             noisefloor-only sound is free of Dx and other Production sounds
         e. optional advanced step - in the process UI Frequency window, you can draw a curve to select the frequency ranges that will be processed - this is another
             way of "thinning the brush" so that you are NOT processing where it's not needed in the broadband range - i.e. hiss from a low-quality mic,
             open the FA window [alt-Z] to see realtime Freq. Analysis on playback of your clip with the processing;
             adjust your settings and the curve in the window to counter the frequency range of the noisefloor - this process is like alchemy, wicked awesome
         f. once you're happy with your settings,  click the Save Effects Preset button (down-arrow on hard-drive) next to the Presets pulldown button.
                   do NOT apply your process yet - that's the next step
    3) now, you're going to create the Favorite that the Batch Process will use to process your clips
         a. select Favorites / Start Recording Favorite (every user function of the software is now being recorded into a macro)
         b. in the Noise Reduction UI, click the Load Noise Print button and select your saved file
         c. now, select your preset from the pulldown menu
         d. click the Select Entire File button below the UI Freq. window
         e. click Apply
         f. click Favorites / Stop Recording Favorite
    4) now, under EDIT, select Batch Process
         a. select your new Favorite from the pulldown tab
         b. drag and drop the files into the Batch window or load them from the Load button in the upper left of the Batch window
         c. click the Export Settings button in the bottom left
         d. set any pre/postfix labeling additions (this works a lot like Adobe Bridge's Batch Rename tool - amending the original filename to differentiate
         e. set a NEW save location to isolate the files
         f. set the format / type / bitrate  (best to keep the original format or a higher quality); when finished, click OK
         g. in the lower right corner, click the RUN button and watch the magic right before your eyes
    [HERE IS THE CHEAT]
    Now that you're learned the magic of batch processing (FYI a new favorite can contain / execute multiple existing effect processes), here is what I recently did in a doc with interview footage - guys in front of a green screen with a less than perfect sound environment.
    1) in Multitrack mode, double-click your clip to process
    2) in Waveform mode, select the noisefloor area to sample and type shift-P
    3) type ctrl-shift-P to open the UI - adjust your De-noise settings for ALL of your processing
    4) type ctrl-A to select the entire file
    5) click Apply; type ctrl-shift-S to save this processed file (I add "_PROC") as an alternate to the original which still exists should you want to go back to it easily - the ALT file will be in the multitrack timeline
    6) type G (de-select I/O area) then type F12 key - returns to Multitrack mode
    7) double-click your next clip to process and repeat steps 3-7 until finished (you won't need to tweak the settings in 3 after the initial step 3)
    In 3-5 minutes, you're Done!
    I discovered another layer of coolness within Audition regarding CLIP Effects Racks where one can setup a stack of effects, save as a User Preset, and apply them to either an individual clip, a set of clips, or to a track.  This is great when you want to apply, for example, a Parametric EQ for filtering an outdoor location or boosting a lav mic's High Freq. Shelf for addition sibilance PLUS a Tube-modeled Compressor to handle dynamics...you spend a lot of time tweaking the settings "just right", and now you want to apply to more than one clip on a track.
    In a short film I'm working on, I use this technique to apply EQ and Room Ambiance (reverb) to camera perspective changes on a single track of ADR for off-camera Dx.  I place the Dx in a track. Splice on the camera edits to make unique clips, select the Audio Perspective preset I made for each camera angle, and Voila!
    Have fun!
    -CS

  • Reached end of file while parsing error

    I have a problem. It looks like my program has no errors but I get an error that says "reached end of file while parsing" (note: this is being developed in NetBeans). Can you help me?
    class LongNumbers {
        public static void main(String[] args) {
            long numbers = 12345678910L;
            int number = 2;
            switch (number) {
                case 1: System.out.println("One\nTwo\nThree\nFour\nFive\nSix\nSeven\nEight\nNine\nTen");
                case 2: System.out.println(numbers);
            int firstArg;
            if (args.length > 0) {
                try {
                    firstArg = Integer.parseInt(args[0]);
                } catch (NumberFormatException e) {
                    System.err.println("Argument must be an integer");
                    System.exit(1);
    }

    Oh, nevermind. I found the problem. The admins can delete this if they want.

  • Excel process does not end properly

    Hello All.
    I am using excel in my program writing data into it an excel workbook and then later on reading data from it. I have written down the code of closing excel worlkbook and shutting down excel application hence releasing the handles for it. But when i do that i.e. when the code containing excel workbook closing and excel application shutting down executes, excel workbook is closed but excel process does not end properly and can be seen in the task manager. And when i repeatedly open the excel file through my front end interface and close the file, another excel process is added in the task manager which does not end and so on. What can be the problem and solution. Thanks in advance.
    Best Regards.
    Moshi.

    Interfacing to Excel via ActiveX may be tricky, ending in situations like the one you are facing now.
    The basic principle is that every single handle opened to an Excel object (workbook, worksheet, range, variant and so on) must be closed properly for the entire process to terminate gracefully. If a reference remains unhandled at program end you will find an instance of Excel remaining in the task list and you may suffer erratic behaviour in subsequent accesses to the product.
    You must double check all references and add approporiate dispose/close commands for every one of them.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Process does not end when binding a object to registry

    I am writing a Unit Test case in which i need to create a datasource and bind it to RMI registry so that the methods i need to test can get a database connection . The problem is that after the test cases have finished running the process does not end and i have to shut it down manually . When i do not bind the datasource , the process ends put with errors because the methods do not get a connection. Even unbinding it after running the test cases does not help.
    Edited by: gurpreetbhalla on Jun 25, 2009 11:56 AM

    public void testIntraDayForClient() throws Exception
              ConstantConfig.JNDI_FACTORY = "com.sun.jndi.rmi.registry.RegistryContextFactory";
              Hashtable env = new Hashtable();
              env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.rmi.registry.RegistryContextFactory");
              env.put(Context.PROVIDER_URL, "rmi:");
    InitialContext ic = new InitialContext(env);
    // Construct DataSource
    SQLServerConnectionPoolDataSource ds = new SQLServerConnectionPoolDataSource();
    ds.setURL("jdbc:sqlserver://10.200.41.201:1433;databaseName=TradeportTC");
    ds.setUser("sa");
    ds.setPassword("superuser");
    DataSource d = ds;
         ic.unbind("TCDB_JNDI");
    ic.bind("TCDB_JNDI", ds);
              HttpServletRequest req = new MockHttpRequest();
              HttpServletResponse resp = EasyMock.createMock(HttpServletResponse.class);
              ActionContext context = EasyMock.createMock(ActionContext.class);
              HttpSession session = EasyMock.createMock(HttpSession.class);
              EasyMock.expect(session.getAttribute("ZephyrUserName")).andReturn("sclient90");
              EasyMock.expect(session.getAttribute("ZephyrDomainId")).andReturn("8a48a9cb1860e2a4011860e2c64d003a");
              EasyMock.expect(session.getAttribute("isTrader")).andReturn(false);
              EasyMock.expect(session.getAttribute("accountsDataDB")).andReturn(null);
              EasyMock.expect(context.getSession()).andReturn(session).times(12);
              session.setAttribute("vawTrades", null);
              session.setAttribute("noOfDays", null);
              session.setAttribute("accountNo", null);
              session.setAttribute("exchange", null);
              session.setAttribute("symbolName", null);
              session.setAttribute("trCode", null);
              session.setAttribute("status", null);
              session.setAttribute("accountsDataDB", null);
              EasyMock.replay(session);
              EasyMock.replay(context);
              MyOrdersAction action = new MyOrdersAction();
              action.execute(req, resp, context);
    This is the unit test case which does not exit , if i skip this binding ic.bind("TCDB_JNDI", ds);
    then it exits normally with a failure,

  • Make full TV view while connecting to Apple TV

    How to make full TV view, while connecting my iPad Air to the Apple TV???

    You still need a local network to be able to use airplay

  • Stuttering while I edit/view

    I notice sometimes but kinda often that while I editing a video and want to watch what Ive done, the video sometimes stutter.
    Frame freezes and then just jump forward a bit.
    I just wonder if it's because of my computer isnt up to par when it comes to video editing.
    If it mattes the video Im editing is 1920x1080 with audio in them.
    And the video is on a regular HDD not and SSD, does that matter much?
    It doesn't help to render the timeline either.
    Any suggestions?
    Is it mainly CPU and RAM speed that have most effect in speed you can render a video?
    Program:
    PE12
    My pc:
    Intel® Core? i5-2500K CPU @3.30GHz
    MSI P67A-GD65 B3, Socket-1155
    Corsair Vengeance? DDR3 1600MHz 8GB CL9
    GeForce GTX 780 3GB
    Corsair SSD Force Series? F115, 115GB
    Samsung SpinPoint F4EG 2TB 

    OK, one more question - which version of PrE are you using, and is it the 64-bit version?
    If the Project setting does match your media files (no colored line), you are using the 64-bit version of PrE on a 64-bit OS, and your computer is adequately fast, the Timeline should play smoothly.
    Let's look at your I/O sub-system, i.e. the SSD & HDD. That Samsung SpinPoint is a good HDD, but, if I read correctly, is both a "green" HDD (the EG = Eco-green), and is a 5400 RPM drive. Both of those are weaknesses for digital video editing. Ideally, the HDD should be 7200 RPM, and not a "green" unit, for greatest speed and performance. Were it my computer, I would add a 7200 RPM unit (could be SpinPoint, WD, etc.), for my Projects and media files, and use the SpinPoint EG for archives, etc.
    A large SSD would be even faster, but would be expensive, and not sure that one would see a lot or real-time performance gains vs a 7200 RPM, non-green HDD. There would be a difference, but just not sure the uers would see all that much.
    How large is your SSD, and how much free space does it have? The reason that I ask is to do a test Project, where your Project and your media, were ON that SSD. I'd do a small version of the one that you have now - maybe only one, or just a few, of your MTS files, with the same Project setting. This would take the SpinPoint out of the mix, and allow you to see if the i5 is capable of playing that test Project's Timeline smoothly.
    Good luck,
    Hunt

  • Cross-processing effect in Elements 8 for Mac?

    I'm doing a free trial of Elements 8 on my Mac and am looking for a way to render cross-processing effects. I know that if you have a Windows PC, you can install a plug-in called SmartCurve which will enable to you to make the color adjustment curves demonstrated in this tutorial:
    http://carlzon.deviantart.com/art/Cross-processing-tutorial-28658861
    It's not available for Mac, however. Is there a way for Mac users to create color adjustment curves in Elements, or another way to somehow render faux xpro effects?

    I've downloaded from that blog...coffeeshop blog...before without any issue. Grant's tool's appear clean. I've installed those and a lot of people on this forum have through the years without complaints of infection.
    Truth told I haven't had any problems with any photoshop actions, patterns, layer styles, or brushes that I have downloaded. I've downloaded a lot through the years and only recently have I got alerts from my anti-virus when looking up anything Photoshop related.  So, far I'd say it's doing an image search to find something Photoshop related like a tutorial that is more likely to lead you to something nasty. I like doing an image search to see the result but am going to have to break myself of that habit.
    Being on a Mac, you should watch out for video more these days with the cross-platform java trojan that's currently out there. I'm on a PC so I use anti-virus which detected and removed it a couple of weeks ago.
    I've never used element+ so can not say how good it is but if you look up elements+ reviews you'll find people who downloaded the trial version from cnet and bothered to rank it and write a review were very negative in their comments about the program...1 out of 5 stars.

Maybe you are looking for