Processing error in the soyrce system

Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message --proceesing error in the source system.
In the source system apllication log the following warning message displyed.
No assignment of payroll data to BW month for country grouping 99.
Diagnosis
No assignment is specified for country grouping 99 in the Customizing activity "Assigning the Payroll Data to BW Month".
System response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for longtime and in the manage tab it is in RED state.
If any one come accross this , please provide good inputs....
Thanks & Regards
SK

Hi,
You have to set the Settings in ECC system
R/3 Customizing Implementation Guide(SPRO) -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> (Pay-Roll Plugin) Assigning Payroll Data to a BW Month.
make a new entry for the BW Month for the country
Regards
Happy Tony

Similar Messages

Create process error 740 the requested operation requires elevation

Hi Friends,
I'm trying to launch Virtual KeyBoard from my application. I'm using jdk1.6.0_02. (I also tried on jdk1.3 , which throws same exception as of jdk1.6.0_02)
try{
            Runtime.getRuntime().exec("C:\\Windows\\system32\\osk.exe");
        catch(IOException ex){
            System.out.println(ex.getMessage());This works fine on Windows XP , but on Windows Vista it throws exception :
Can not run Program "C:\Windows\System32\osk.exe" :create process error 740 the requested operation requires elevation
It works on Vista if I turn off user Account control from User Account in ControlPanel.
While If I try to launch (Calculator)Calc.exe instead of (Virtual KeyBoard)osk.exe then it launch successfully without turning off User Account Control.
Does any one has an idea how can I launch Virtual Keyboard ("osk.exe") without turning off user Account Control on Windows Vista.
I'll appreciate any help regarding this topic.
Thanks.

Thanks for your promt reply.
The llink you write is not launching the page.
My question is why it launching Calculator without any privillage, while it has problem in launching Visual KeyBoard.
Thanks

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the las

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
I don't know if the bug exists in the program or the "Creative Cloud.
Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?

Entering the serial number is probably part of the registration process.
Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted?

Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE

Hi All,
I am getting Error when i am viewing my salary slip in ESS.
The Error i am getting is :
Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE
So can anybody help me out in this.
Regards,
Dhruv Shah

Solved the Error by deleting the spool in the Backend.
Spool was overflow.
Regards,
Dhruv Shah

Process Error in the Application Monitor

Dear All
we currently have the below shown Process Error in the Application Monitor. it is absolutely impossible to delete them.
What can cause this problem, please I need a solution on how to remove them for ever.
Application Monitors
Shopping Cart
Shopping Cart : Not transferred to backend
Date Time Error Message
26.03.2011 00:29:36
26.03.2011 01:29:36
Shopping Cart : Backend application errors
Date Time Error Message
25.03.2011 12:22:06
Kind Regards
Marco

Hi,
Try to locate the error in RZ20 transaction and delete it from there, then refresh your application monitor.
regards,
MRao

Conversion factor error in the source system

Hi All,
I got conversion factor error in the source system, when i tried to load maste data.
can anybody help me in. It is urgent please...
Thanks in advance
Narendra

Hi...Post the error
Regards

Question!hi!i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

question!hi！i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

Peruse the hits from a google search for recovery system can't be created site:apple.com

Trfc error in the source system

Hi,
I got an error as trfc error in the souirce system,How to proceed regarding this.How to check RFC connections.What are the transaction codes for trfc and to check rfc connections.. please let me know.
Many Thanks

Hi,
We are having some problems.
While loading the data in BI 7.0 from R/3 ECC 6.0, sometimes (not always) IDOCs are getting stuck before coming to BW System.
The job always finishes successfully from R/3 side but before coming to BI, IDOCs are getting stuck and we manually have to push them into BI System.
How to avoid the situation of IDOCs getting stuck and what could be the possible reasons.
Please guide.
Thanking You,
Tarun Brijwani.

Error in the Source system while data loding through Process Chain

Hi,
I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
Regards,
Javed

Hi..
It means that the extraction job is failing in the source system..
Please check the Job log in the source system --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
Look there may be multiple reasons behind this....
1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
2) Or may be work processes are not available and due to which jobs are failing due to time out...
In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
Regards,
Debjani..

Inbound idoc error in the source system

HI,experts
I manually configurate the idoc type ,message type ,etc between the BW system and r/3 source system when the automatic program encouters errors. And the communication between BW and source sysyem seems ok since the source system is activated successfully in BW side.
But when I check the inbound the idoc in source system after i triggerred a full load for the datasource 0FI_GL_4,an error occurs in the inbound process in R/3. There is no control information in the idoc which message type is RSRQST.
how can i figure this issue out ?could anyone help me ?

HI,ALL
Thanks for your replies and documents.
Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ?

Error in the logical system (BW - R3 connection)

Hey guys, i need help, actually i created a connection between BW and R3 system, but i think i wrongly assigned the details to another BW system and now whenever i tried to load the data, it's not being processed.
And i checked and it shows me that the connecetion is between source system (538) and BW (B3T800), though my BW client is BW (BW TEST). so how do you think i can change my background users i assigned while creating the source systems, because i think, while creating the source system, i used wrong background users. So instead of connecting via logical system (BW test), its connecting via (B3T800) to SAP R3 (538).
--> Also i tried changing the Logical system name, as i checked and showed that for my BW client now it has a entry of the BW system (B3T800) and when i tried chnging it, it let me change that, but when i went to the RSA1, SAP doesn't let me access that, saying a message "your logical system has been changed", so can i change the logical system, do you guys think my problem will be solved?
Regards,
Amit Jaidka

I have checked in SM37 taking that request number and when i checked the job log , its showing
5 LUWs confirmed and 5 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
Lock table overflow
Job cancelled after system exception ERROR_MESSAGE
what is the reason for this termination in R/3.
Thanks

[SOLVED] Mirrorlist's error installing the base system

Hi!
I'm trying to install ArchLinux on my Acer Aspire 5750G (I'm following the "Beginners' Guide").
I managed to establish a Wi-Fi connection (Although "wifi-menu" didn't work: I used the wpa_supplicant function. But this isn't the purpose of the thread) and to mount the various partitions. But now I have some problems installing the base system.
Infact, when I go for:
pacstrap -i /mnt base
I get an error like:
error: failed retrieving file 'core.db' from archlinux.openlabto.org : Resolving timed out after 10463 milliseconds
And it continues like this for each mirror of the mirrorlist, so I think that they're not the problem.
And its not even a problem of my internet connection, because if I try the "ping" command it works.
I have to say that my iso is the "July" one, because when they released the last one I had already burnt mine to a DVD. Maybe that's way I get this error, but I'm note sure.
I've searched for some solutions on the forum, and someone said that after some time it should function.
Anyway, how can I resolve this issue?
Thanks in advance.
Last edited by Wantoast (2013-08-07 17:07:28)

drcouzelis wrote:The month old installation media shouldn't be a problem.
Definitely. I have just tried with the newest version and the problem occurred again.
drcouzelis wrote:
Does the Internet connection really work? Can you load a website in a web browser?
# Use links (or links2 or lynx, whatever's installed)
links archlinux.org
link will not execute and completion _links exsists.
EDIT: I used elinks and Internet works. I'm quite sure it's not a connection problem ("Quite" because if wifi-menu didn't work there should be a reason).
Last edited by Wantoast (2013-08-07 14:57:09)

Error in the Source System...

Hi
RSA1-->Source System >(Context Menu)> Check
Error:
The BW IDoc type ZSBA011 is not the same as the source system
IDoc type ZSBD012

Thanks

Hi BW KING,
This error due to RFC connect is not there between BW to Sorce system.
OR else There is RFC connection mis match.
You have to ask the BASIS People to correct the RFc connection between BW to your source system.
Other wise data will not get it will show RFC connection Failed.
Thanks,
kiran.

Why there is an error in the billing system even though I have a new charged card?

I have an Apple account which I need to fill in the billing system via Visa and which I did, but there happend to be a problem where I couldn't update, download or even purchase an app. I assumed there wasn't enough cridet in my internet card so I got a new card with money in it, but it gave me an error saying "There is a billing problem with a previous purchase.". Even though I got a new card it still shows me the same message and when incerting the new card number it tells me "invalid security code". I have contacted the card company to know if the problem is from them but I have updated my account and got this new card but still having same errors. could you help me look what's the problem with the billing system?

Hi R_Loading,
You will need to contact iTunes Support:
https://getsupport.apple.com/GetproductgroupList.action
Or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

Unexpected error from the Operating System

Hello everyone. I have a PCI 1200 board and I use LabWindows/CVI. I want to
make a scan on an analog input channel of my board. For this, I tried the
functions Lab_ISCAN_Op, nidaqAIScanOp and DAQ_Op, and for all of them, the
same error occurs, which is:
return value == -10856
with the message:
osError: An unexpected error occured from the operating system while performing
the given operation.
Any hints for me?
Thanks in advance.
Yves

I have similar problem with Error code= --10452 (noIntAvailError: No
interrupt level is available for use) when I used the Dap_Op() function.
After checking the system's resources (from Control Panel -> System and
click on properties to get the system resources used by my Lab-PC-1200 card.
Win98 has plug and play and so it shows me only the I/O ranges. I forced
the system to allow the Lab-PC card to use IRQ=3 and DMA=5. This resolve my
problem and no more Daq_Op() error messages. I hope this will help. Jack
Sent via Deja.com http://www.deja.com/
Before you buy.

Processing error in the soyrce system

Similar Messages

Maybe you are looking for