PROCESSING.EVALUATION AND CUMULATION CLASS

Hi,
Can anyone send me the link/document for processing ,cumulation and evaluation class.
I want to complete usage .
I tried searching in forum but in vein.
Regards
Ananthi.M
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4685459
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4605028
processing class
I got these From the forum search
Regards
Ananthi.M
Edited by: Sikindar on Feb 18, 2010 1:27 PM

I got these From the forum search
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4685459
https://forums.sdn.sap.com/click.jspa?searchID=20061980&messageID=4605028
processing class
Edited by: Sikindar on Feb 18, 2010 1:30 PM

Similar Messages

Evaluation classes and cumulation classes

Hi All ,
Can anybody give the information about evaluation classes and cumulation classes in HR and how they affects the payroll.It is better for me if any one give the scenario to understand these concepts.I know the basics of these things i.e in which view these details are maintained for wagtypes.
Thanks in advance.
Regards ,
Santosh.

Hi Santosh,
For any wagetype to process in payroll these cummulation class and evlatuion class is important.As payroll is Country specific each county has specific base for calculating Cummulation class.
Cummulation Class: In payroll there are two types of cummulation
(a) Cummulation of wage types over another wage type
(b) Cummulation of wage types over a period of time
For the first one it is used to calculate the base for different tax calculation. It is represented by /1 series wage types. Examples For HRA Basis it is /111 and the base is mainly Basic+DA...etc.
For the second one it is calculated by Processing class 30 Specification 0,1,2,3 and T. The related tables are V-T54c1, V_T54c4 and V_T54c3
Evaluation Class: This is used mainly for reports i,e Form 16, Form 24, Payslips etc. In India mostly used Evaluation classes are
02 - For Payments and Deductions in Payslip
06 - For Sec 17(1) For Total Gross
07 - For Sec 10 Deductions
09 - For Sec 17(3) For Perks
08 - For Sec 17(2) For Income from other sources
11 - For Sec 217 2 (A)
* All these reports you can see in table V-T512w_D or V_t512w_O
I think this will help you
Best Regards
Baidya

Processing classes , evaluation classes and cumulation classes

Hi All ,
   Can anybody give the details of PCR in HR and how to use processing classes and evaluation classes in PCR.
Regards ,
Santosh.

Hi,
we have an operation VWTCL which checks the Processing class and its specification in PCR.
go to T.Code: PE04 and check the operations documentation you will get clarity.
Operation VWTCL VV reads the specification of processing class VV for the current wage type in table T512W, and enters this as a single-character entry in the variable argument of the personnel calculation rule. Function VWTCL is a decision operation.
for example:
X010 Determination of valuation bases INTERNATIONAL
        VWTCL 01   Processing class
            ERROR      Cancel processing
          0
            ADDWT *    OT   Output table
    1
        VWTCL 01   Processing class
          0
          1
            ADDWT *    OT   Output table
            ELIMI Z    Elim.time period ID
Regards,
mohammed

Processing classes, cumulation classes and evaluation classes

Hi Friends,
What is the diff between processing classes, cumulation classes and evaluation classes. where we see these three and what is the table no. for this?

.) Processing Class - A wage type characteristic that controls processing during Payroll. There are different processing classes for the various processing steps that are performed within Payroll. During the payroll run, SAP R/3 processes a wage type in a specific processing step according to its individual specification in the respective processing class.
Cumulation class - Cumulation class are used to cumulate the model wage types to generate the /1** technical wage types.
Example - Processing class 20 is used for cumulation and processed by PCR X023. Now suppose you have set specifiction as 8. Now if you will check PCR X023 for spec 8, it says to cumulate wage type into cumulation class which are ticked. Like may be you want to cumulate a model wage type into /101, set PCL 20 as 8 and tick cumulation class 1.
Evaluation Class - Wage type characteristic that controls processing when payroll results are evaluated and displayed. There are various evaluation classes for the different processing steps that are performed when payroll results are evaluated and displayed.
Example
In the standard system, the specifications for evaluation class 02 determine how a wage type is printed on a form that is payslip.
Specification 00: no printing on the form
Specification 01: prints personal payments/deductions
Specification 02: prints wage types included in the total gross amount
Specification 03: prints wage types derived from time-based payments and included in the total gross amount

Evaluation Class, Cumulations Class, & processing class: Indian Payroll

Dear All.,
Indian Payroll
What are the Evaluation Class, Cumulations Class, & processing class we need to maintain for ESI Eligibility for a Wage Type ?
Scenario : Except LTA all other Salary Components(as part of Infotype 8) consider for ESI Eligibiilty. So I wanted to check all other WTs.
Pls guide me how do i can deal with this.

Use t-code PC00_M99_DLGA20 to generate the "Use of WT in Payroll" report, for Country Grouping 40, without specifying any WT, and using the WT Validity Dates from Today to Today.
When the report is on screen, double click on "Meaning of processing classes and their values".
Click on any character in the report's description of Processing Class 01, and use the Binoculars to search for ESI. The system should show 4 "hits", all on PrCl 72.
I don't know anything of Indian Payroll, but it would seem that PrCl 72 is relevant for ESI. Use this report to see what WTs cumulate or don't cumulate into ESI/PTX basis (drill down in each line of PrCl 72).

US PY - Processing Class and Cumulations

Hi expert,
I am facing following scenario , plz help me to sort that out...
I have defined WT 1GAW,1GCC,1GSP, 1GBN
AW - Award,
CC - City Component
SP - Shift Allowance
BN - Bonus
1GAW Weekly & Hourly
1GSP Salaried & Weekly
1GCC For all
1GBN For all
Under processing class and Cumulation ... Which category I have to select out of
o
1
2
3
4
5
6
Your prompt reply appreciated...Points would be given..
Regards,
Sejal

Hello Sejal,
When you create a WT use the Copy function from SAP Delivered model WT when creating the WT, so that the default setting of all the Processing class and Cummulation class with respect to Model WT will be there in Created WT also. So that you can do only minimal changes when required for the WT.
With Regards,
S.Karthik

Process and java classes

Hi...
My Bpel process accesses some java objects..To keep classes and projects separate I am keepin these classes in a war/ear and deploying it on oc4j...do u think the process can access the java classes in .war file..
I know i can have the java classes along with process source and copy the libs in BPEL-INF/lib but was trying to keep the code separate..
The process when compiled and built is packaged into .jar archive ..If we can drop this jar in an .ear package and deploy it probablythen the process can access the java classes..Can I access samples for the same?..
Thanks
Bhupinder

I don't believe you can access java objects from a war/ear, at least I wasn't able to get it working.
We have been jar'ing the objects up and placing them in C:\OraBPELPM_1\integration\orabpel\system\appserver\oc4j\j2ee\home\applib where the apps server can find them.
Toby

الترجمة I have a problem how can I cancel all operations evaluated by so I can use the service again in the same payment method because Apple stuck processes evaluated by on my account and I can not purchase again

الترجمة
I have a problem how can I cancel all operations evaluated by so I can use the service again in the same payment method because Apple stuck processes evaluated by on my account and I can not purchase again

If your CC was banned for fraudulent activity, you will need to use another CC. If the account was disabled, try changing the password to enable it at : https://appleid.apple.com
Otherwise, try contacting the iTunes store via : https://expresslane.apple.com , choosing iTunes and then iTunes store and from there selecting the topic as it pertains to your query.

What is Processing Method and Processing Class in Action Profile

Dear all,
I have defined an action for case management, to trigger an email after saving the case in Enterprise portal.
Action is getting initiated in case document after saving, but after a while it is showing message 'Incorrect'.
In the actions monitor report, error message showing that some problem in Processing Method.
In my action I have maintained settings as below.
Form name - SCMG_SMART_FORM_CASE
Processing class - CL_SCMG_CASE_CONTEXT_PPF
But I don't know what processing method should I give
I could not find and values under F4 functionality.
Please do advice me what method I can use here.
and why we use processing method and processing class.
your help will be highly appreciated.
Thank you
Raghu ram

Hi
DSD means Daily Salary Deduction for more check this table to understand abd DSD and the respective Processing class 77 V_T7INO1

Cumulation class copy

Hi All,
Is it possible to copy cumulation class /101 & /110 from MOLGA 99 to other countries with similar name as /101 & /110?
Can I copy wage types from MOLGA 40 to any other countries?
Regards,
RK.

Hi,
For cumulate wage types into cumulation wage types.
Wage types start with /1xx are defined as cumulation wage types. e.g.
/101      Total gross amount
/103      Taxable salary
/110      Net payments/deductions
During payroll prcoessing:
With operation ADDCU, the wage types of which cumulation IDs(01..96) is marked in cumulations part of maintanence view 'V_512W_O' , will be cumulated to /101.../196(depend on settings in V_512W_O)
E.g When Monthly factoring and storage:
PIT   X023 P20 NOAB        Gross input and storage
1            ADDWT *
3            ADDWTE*   ADDCU
Wage tyep amount   Specification of processing class 20 Cumulation IDs mark in V_512W_O
M001           500.00    3                                                          01, 03
M002           1000.00 1                                                          01, 03
M003           200.00    3                                                          01
Result in OT;
/101 = 700.00(M001+M003)
/103 = 500.00(M001)
Regards,
Chen Jian

Apache with Tomcat and dispatcher class.

I have a MVC design set up with a controller and dispatcher class. I am trynig to forward the results to a specific JSP. If I run the design completely within Tomcat, then everything works great. I have a tomcat site set up called /jsp. My servlet is within the jsp site. So if I do http://localhost:8080/jsp/mypage.jsp it will bring up the page fine. I then submit to and action of /myservlet?action=test. The servlet/dispatcher classes process and forward the request to "/jsp/mypage_result.jsp". All is fine and dandy.
However, when I try to run this through Apache first let the MOD_JK2 send the JSP/servlet requests to Tomcat the dispatcher doesn't work. I alway get the ERROR 404 page within tomcat (see note 1 below). Even if I use a "./mypage_result.jsp", because the pages are in the same directory, I still the get the error. Can anyone help?
What I think is happening is that when I make the inital request of http://localhost/jsp/mypage.jsp the request gets sent to Tomcat from Apache. Tomcat processes the jsp page and displays the result to the client. The user submits the data to the servlet (through Apache which pushes it to Tomcat). The servlet/dispatcher code runs and then gets ready to forward the request on. Where I get confused or I am completely guessing is that when the forward method gets called. Does it forward the request on as a HTTP request or as a request within Tomcat? I would guess it is an http request and the request comes in through Apache which (depending on the worker2.properties file) will or will not forward the request to Tomcat. This is where the problem happens. On this forward in the dispatcher class.
Please help.
NOTE 1:
HTTP Status 404 - /mypage_result.jsp
type Status report
message /mypage_result.jsp
description The requested resource (/mypage_result.jsp) is not available.
Apache Tomcat/4.1.24

After reading the documentation for the getRequestDispatcher method it seems that the file you are forwarding to must be in the same context. Well if it is in the same context within Tomcat, does it mean it is the same when I am trying to use Apache?
Anyone out there go this to work?
Thank you in advance for reading my post.

Processing type/time type class

Hi All,
I have 10 attendance type of which 5 productive hrs and 5 non productive hrs and 5 absence type.
I have assigned all these in V_554S_E, but i dont know what we have to assign in (Processing type/time type class)
and one more thing T555Y wht is the (Processing type/time type class) number i have to assign
Please suggest.
Thanks
Veer

I solved this issue my self.
I have assigned att/ ab to time type sucessfully.
Thanks
Veer

Exception Description: Unable to process XML tag [driver-class] with value

Hi
I'm newbie with TopLink. I try to write a litle application with TopLink:
- First, I create a session.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<toplink-sessions version="11g Technology Preview 3 (11.1.1.0.0)" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<session xsi:type="database-session">
<name>dbsession</name>
<event-listener-classes/>
<logging xsi:type="toplink-log"/>
<primary-project xsi:type="xml">META-INF/tlMap.xml</primary-project>
<login xsi:type="database-login">
<platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</platform-class>
<user-name>dev</user-name>
<password>F6A3DA7BA187330D4E11A713C42FF833</password>
<sequencing>
<default-sequence xsi:type="table-sequence">
<name>Default</name>
</default-sequence>
</sequencing>
<driver-class>oracle.jdbc.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@//10.10.10.31:1521/devdb1</connection-url>
<bind-all-parameters>false</bind-all-parameters>
<struct-converters/>
</login>
</session>
</toplink-sessions>
- Second, I create a Java Application ( Application1.java):
package project2;
import java.sql.ResultSet;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Vector;
import oracle.toplink.queryframework.DataModifyQuery;
import oracle.toplink.queryframework.SQLCall;
import oracle.toplink.queryframework.StoredProcedureCall;
import oracle.toplink.sessions.DatabaseSession;
import oracle.toplink.sessions.Session;
import oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader;
import oracle.toplink.tools.sessionmanagement.SessionManager;
import oracle.toplink.util.SessionFactory;
public class Application1 {
public Application1() {
public static void main(String[] args) {
// new Application1();
String statement = "SELECT motdepasse,login FROM bou_courtier";
SessionManager sessionmanager = SessionManager.getManager();
System.out.println("test");
// SessionFactory sessionfactory = new SessionFactory("META-INF/sessions.xml","dbsession");
DatabaseSession session = (DatabaseSession)sessionmanager.getSession(new XMLSessionConfigLoader(),"dbsession",Thread.currentThread().getContextClassLoader());
// Session session = sessionfactory.acquireSession();
System.out.println("test");
SQLCall sqlcall = new SQLCall(statement);
session.executeNonSelectingCall(sqlcall);
ResultSet rs = sqlcall.getResult();
try {
while(rs.next()){
String strPass = rs.getString(1);
String strLogin = rs.getString(2);
System.out.println("Password :"+strPass+"---"+"Login :"+strLogin);
} catch (SQLException e) {
// TODO
- Third, I build and run Application1.java in Jdevelopper 11g preview 3. Sadly, the result is a error:
Exception in thread "main" Local Exception Stack:
Exception [TOPLINK-9003] (Oracle TopLink - 11g Technology Preview 3 (11.1.1.0.0) (Build 071207)): oracle.toplink.exceptions.SessionLoaderException
Exception Description: Unable to process XML tag [driver-class] with value [oracle.jdbc.OracleDriver].
Internal Exception: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
     at oracle.toplink.exceptions.SessionLoaderException.failedToLoadTag(SessionLoaderException.java:83)
     at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildDatabaseLoginConfig(TopLinkSessionsFactory.java:408)
     at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildLogin(TopLinkSessionsFactory.java:336)
     at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildDatabaseSessionConfig(TopLinkSessionsFactory.java:182)
     at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildSession(TopLinkSessionsFactory.java:168)
     at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildTopLinkSessions(TopLinkSessionsFactory.java:117)
     at oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader.load(XMLSessionConfigLoader.java:239)
     at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:448)
     at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:311)
     at project2.Application1.main(Application1.java:33)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildDatabaseLoginConfig(TopLinkSessionsFactory.java:405)
     ... 8 more
Process exited with exit code 1.
Can you help me to debug this error. Many thanks
user615555

The internal error: "java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver"
is stating it can't find your driver jar file on the classpath. You'll need to check that you've included your Database driver in the list of libraries on your classpath.
Best Regards,
Chris

Invoking a WLI 9.2 business process from JSF Controller class

I want to call a WLI business process from a java class, which will run in the same JVM as the WLI. I have read that JPD Proxy can be used for this purpose. I am concerned with the overhead of RMI calls. Any insight into this would be helpful .

Hi Raj
You have to use JPDproxy to call a business process from a java class. This is what BEA also recommends at http://e-docs.bea.com/workshop/docs81/doc/en/integration/howdoI/howProxyJavaClient.html as this is the only way to call a JPD from plain java class.
Many customers use this and even if there is, the overhead should not be substantial.
You may also want to try posting in the WLI newsgroup at http://forums.bea.com/bea/forum.jspa?forumID=2047
Vimala-

PipedReader and PipedWriter class

Hi everyone,
Can any of you please explain PipedReader and PipedWriter class by givning code samples ??
(I used tutorials but now I do not understand how to use it with codes)

Can it be regarded as an efficiency that we do not
call read method in loop many times, nistead we only
call readLine method once.A little bit, but that's realy separate from buffering. It's related, but buffering in this context is talking about storing up a whole bunch of bytes in memory and then making one call to write them all to disk at once, rather than incurring the overhead of a physical write to disk for each byte. Or, conversely, reading a whole bunch of bytes with one physical disk read, storing them in memory, and then having the read, readLine, etc. calls pull the bytes from memory as needed and only going back to disk when the buffer is empty.
readLine instead of read is kind of similar in that you only make one method call to get a bunch of stuff at once, rather than calling many methods to get the pieces individually, but it's different than the above description of buffering because whether it's read or readLine, you know you're processing one line's worth of data and you explcitly read exactly as much as you need--either with multple read calls or one readLine call. Buffering happens transparently to you. You don't know how many physical disk reads/writes there are, or where they occur.

PROCESSING.EVALUATION AND CUMULATION CLASS

Similar Messages

Maybe you are looking for