Processing / exporting question

I have a 8 Core (2 x 2.8 quad core intel xeon) with 4gb (800mhz DDR 2 fbdimm) of RAM
AND....
I have a iMac 2.8ghz intel core 2 duo with 2gb (667mhz DDR SD) amount of RAM
we have projects that are exported (or converted) from DV footage into FLV files that go up on the web
we purchased the 8 core for the processing power to export these particular files faster.....
My question is.....
the 8 core doesnt go any faster than the iMac exporting these files!? Is there something wrong? is there something we can do to make it go faster? can we configure it to make it use more of this processing power?
and of course we are using compressor to do so, is there a way to make compressor use more processing power?
Confused....
Thanks

Provided that you can export a QT Movie out of FCP, you'll want to make use of Virtual Clustering. Mike Curtis (of HD for Indies fames) was nice enough to document this process on his site.
This process, however, will not work if your workflow involves exporting directly from FCP to Compressor. Also, it's recommended to have at least 8GB of RAM if you're doing this.

Similar Messages

Basic Exporting Question

My main question is a very basic exporting question, but here is a super-condensed explanation of my big-picture goal for context:
Large (~450 MB) aiff on CD --> trim w/ Quicktime --> small (~16 MB) MP3 in iTunes
I would like to take an audio file (aiff) that is approximately 450 MB and export it from Quicktime and in doing so, reduce the file size and convert it to MP3. When I simply try to export it, it doesn't ask me about what size I want, nor does it give the option of MP3 formatting.
I have figured out how to reach my goal, but it's a mess. After I make my trims in QT, I have to:
1. select "share" instead of "export".
2. It asks me what size I want and I select small.
3. The file is then exported as a Quicktime movie into Mail and the size is reduced from 450 MB to about 20 MB.
4. I then have to "right-click" on the attachment in the email that is created,
5. save the attachment,
6. discard the email,
7. import the file into iTunes, and
8. create an MP3 in iTunes to finally arrive at my goal.
This seems like a ridiculously convoluted process to change a large aiff to a small MP3 and put it in iTunes. Any suggestions?

Thanks. I guess the basic answer to my question is that it can't be done in one or two fell swoops. The problem is that it starts on a burned disc, and I need to make edits to it before it ends up in iTunes (to be eventually used in iWeb). I was hoping to avoid juggling back and forth between iTunes and QT. I either would have to send it back to QT to do the edits after -->iTunes-->mp3, or import the large file from the CD to QT, make the edits, save changes, import large file to iTunes, convert to mp3.

Error in Export "EXP-00091: Exporting questionable statistics "

when i execute export on server having RAC DB R10g R2 on Linux 4 it return error , nobody has changed it's characterset .
how to fix this error, CAN THIS ERROR CAUSE BIG DESASTER TO DB IN FUTURE
C:\>exp hst/hst file='/home/oracle/expdat.dmp
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user NRI
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user NRI
About to export NRI's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export NRI's tables via Conventional Path ...
. . exporting table TABLEA 0 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table TABLEB 0 rows exported
EXP-00091: Exporting questionable statistics.
Kindly Help be ho can i fix this error
Thanks in advance

Hello,
You wrote:
CAN THIS ERROR CAUSE BIG DESASTER TO DB IN FUTUREThe error message EXP-00091: Exporting questionable statistics just warns you that the statistics
were exported but these statistics may be not useable.
So, if you have to import these Tables, you may have to collect again the statistics of these Tables.
It's not relative to this problem but why don't you use DataPump (expdp/impdp) ?
Please find enclosed a link about DataPump, it's much more powerful than the classical export/import:
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#i1009203]
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Feb 6, 2010 12:56 PM

EXP-00091: Exporting questionable statistics

Dear Friend,
I am using Linux Database and Windows database, the problem now I am facing while exporting data from Linux which is imported from windows oracle database dump file.
when I am exporting I am getting this error
EXP-00091: Exporting questionable statistics
and shows
Export terminated successfully with warnings
Now exported file I am importing from Linux to windows and getting this error
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Import file: EXPDAT.DMP > c:/aa.dmp
Enter insert buffer size (minimum is 8192) 30720>
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
Regards,
Oracle User

Hi,
>>because I exported dump from oracle10G
Then you use the exp 10g version, right ? To move data DOWN a version(s), you need to export using that lower versions EXP tool and using IMP that lower version tool.
Take a look at this below?
Exporting Data From Release 10.2 and Importing Into Earlier Releases
Export From      Import To      Use Export Utility For      Use Import Utility For
Release 10.2      Release 10.2      Release 10.2           Release 10.2
Release 10.2      Release 10.1      Release 10.1           Release 10.1
Release 10.2      Release 9.2      Release 9.2           Release 9.2
Release 10.2      Release 9.0.1      Release 9.0.1           Release 9.0.1
Release 10.2      Release 8.1.7      Release 8.1.7           Release 8.1.7
Release 10.2      Release 8.0.6      Release 8.0.6           Release 8.0.6
>>EXP-00091 is still remain.. you said I have to chang ethe NLS but I am new to linux
I think that there is no problem ... but you can use also as I said before the statistics=none clause, but remember that you need to use the exp 9i version ...
Cheers

Process Integrator question?

Hi,
I'm not sure where to ask a Process Integrator question so I have
decided to ask here. I have been asked to look at business
process (workflow) automation. I have read the datasheet and your
whitepaper on Process Integrator and my question at the moment
is "How do we integrate Process Integrator with existing sets of
EJB's? How does it tie together with WebLogic 5.1 (is it a bunch
of EJB's deployed on top of the app server ala Commerce Server)?
I'm looking for more technical answers so that I have a reasonable
understanding in estimating how much work/effort it would take
to use this product. I also know that this is your engine for your
future Collaborate product, however, that product will not be
available soon enough to tackle our customers current needs.
Thanks for your patience in reading this long message and
I would appreciate any answers including "forget about it until
Collaborate goes to market!". I would like to give an honest
technical reason to my manager about why we should
consider (or not consider) using Process Integrator.
Thanks again!
Hugo
408-861-5292
marchFIRST
Cupertino, CA 95014

I don't know much about WLPI, but I have forwarded this along internally and
someone should be contacting you soon.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Hugo Penafiel" <[email protected]> wrote in message
news:[email protected]..
Hi,
I'm not sure where to ask a Process Integrator question so I have
decided to ask here. I have been asked to look at business
process (workflow) automation. I have read the datasheet and your
whitepaper on Process Integrator and my question at the moment
is "How do we integrate Process Integrator with existing sets of
EJB's? How does it tie together with WebLogic 5.1 (is it a bunch
of EJB's deployed on top of the app server ala Commerce Server)?
I'm looking for more technical answers so that I have some
understanding in estimating how much work/effort it would take
to use this product. I also know that this is your engine for your
future Collaborate product, however, that product will not be
available soon enough to tackle our customers current needs.
Thanks for your patience in reading this long message and
I would appreciate any answers including "forget about it until
Collaborate goes to market!". I would like to give an honest
technical reason to my manager about why we should
consider using Process Integrator.
Thanks again!
Hugo
408-861-5292
marchFIRST
Cupertino, CA 95014

Exporting question #53427

I read through exporting questions for over the last year, but I came away more confused than ever. Here is my problem (which others had, but I'm looking for the quickest solution):
I made a 3 hour video on iMovie 8 only to read about its limitations afterward. I used information I found on some post to download iMovie 6 and then export my iMovie 8 project to it for its finalization.
I tried to export the movie LARGE size and it took 6 hours only to end up with the message error -2125.
I then tried to export to Quicktime, but it was scheduled to take 30+ hours.
Is there an easier way to get the iMovie 8 project into iMovie 6 in order to complete it?
(As a side note, I have a 2003 copy of Final Cut Pro which I have not installed. Would this be worth installing on my MacBook to transfer the project to that?)
Thanks as always.

Pete Abred wrote:
.. I was wondering if you know how how I can divide my 3 hour movie into 3 dvd's when I burn the project. ..
iDVD accepts projects of up to 120min.. so 2 DVD would be enough, allthough ≤60min allow the best quality in iDVD ..
iM mastermind Dan Slagle answers your question on his site:
http://www.danslagle.com/mac/iMovie/usage/5003.shtml

Batch Process Export As and Save As JPEG Question?

What is the method for creating scaled JPEGs from PNG files with batch processing (File | Batch Process...)?
Application environment: Fireworks CS4.
Using History panel, I manually captured instructions
Modify | Transform | Numeric Transform (13%)
Modify | Canvas | Fit Canvas
File | Save As (JPEG)
History panel's saved JavaScript file script:
fw.getDocumentDOM().scaleSelection(0.11999999731779099, 0.11999999731779099, "autoTrimImages transformAttributes");
fw.getDocumentDOM().setDocumentCanvasSizeToDocumentExtents(true);
fw.saveDocumentAs(null, true);
Running this sequence as a batch job requires manually selecting JPEG and "okaying"
CS4 documentation for saveDocumentAs is defined with different argument list: fw.saveDocumentAs(document) . CS4 documentation also has: fw.exportDocumentAs(document, fileURL, exportOptions) to export JPEG (80% quality). CS4 feature File | Image Preview... | Export does not create a history record for guidance. I cannot find an example of either instruction save a file to a local folder in JPEG format. My objective is to add an additional batch step Rename (prefix) for the JPEG output, and script this a a batch process.

Joyce,
Thank you. Your suggestion helped clear my mental log jam.
Fireworks batch scripting seems to work in reverse.
Using "Batch Process..." scripting interface 'Export' (as JPEG) option first, 'Rename' (add Prefix) option second, and then follow these by using the history panel's 2 previously saved steps (Numeric Transform, Fit Canvas), batch process now works. PNG file (list) is saved in targeted folder as a reduced scale JPEG with a prefixed file name.
Batch Process allows the entire newly defined command sequence to be saved (script.js). Placing this (renamed) file into Firework's batch look-up directory for scripts (C:\Documents and Settings\account_name\Application Data\Adobe\Fireworks CS4\Commands) does not work. The file name does not display in "Batch Process" window "Batch options:" Commands drop-down list.
Batch Process only works by recreating the above steps each use.
The new (JavaScript) file is 26 KB. Is script file size limited in Fireworks "Batch options:" feature?

Bird box camera footage - Export question

Hi all, I have just got a bird box camera and recorded a lot of footage of birds. I am now in the process of editing the nest box footage with Premier Pro. My question is, what is the best format to export to the web? The footage is excellant and around 10MB. Ideally, I would like the footage to be viewed on most browers. I have tried AVI, MPEG etc. Shall I be looking at flash streaming instead. Hopefully, with the correct format, most people can view my nest box footage without any problem. Please can anyone advise. JF

Flash seems to be the number 1 choice, followed by WMV (not easily viewed on MAC's).
It was raining cats and dogs when the two friends, that were playing golf arrived at the 14-th hole. One said to his friend: "Look at that bird-watcher over there. Can you imagine bird-watching in this kind of wheather?"

Syncing Audio with Merge Clips option and OMF export question/issue

Hi,
In the past when I've edited video, when it came to syncing audio I always did it manually. This time, using Premiere Pro CC, I used the merge clips option, to speed up the syncing audio process, which was a huge time saver with excellent results.
The question/issue I have..is that when I get my OMF exported for my sound editor, will this screw anything up, since on the project file, it doesn't use the original audio file, but the one that was merged. And in the project list, I don't even need to have the original audio file listed, since it's already been merged into a clip, which I used in the project. I know it's the same file used, but will it mess anything up since a merged clip audio was used instead of just dragging the original track onto the timeline?
- Ken

A good way to know for sure (and therefore feel comfortable that you're doing the right thing) is to do a test OMF export, then open this in Audition. This ill show you exactly what you're exporting.

Process chain questions

Hai All,
           I designed a process chain with data flow like this:
R/3>ODS1>ODS2>Cube.
The process chain sequence is:
Start>>Load data>>activate ODS1 data>>load data to ODS2>>activate ODS2 data>>delete index>>load data to cube.
           My process chain is working and the data loads are good. But I am getting warning messages for all three variants "activate ODS1 data>>load data to ODS2>>activate ODS2 data>>"
The message for the two activation variants is as follows:
A type "Update ODS Object Data (Further Update)" process has to follow process "Activate ODS Object Data" var.ACTIVATEZMONDET in the chain
Message no. RSMPC016
The message for the loading variant is as follows:
A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_3YF4Q8R0RSHTDJH74WZOAXBC6 in thechain
Message no. RSMPC013
           The version I am working on is BW 3.5. My question is it ok to have these warning messages or do I need to do anything else?
Thank you.

Hi Visu,
If you data loads are running fine, you can ignore the warning messages. The system tries to warn you in case it suspects that a process is missing from the chain of events required...but there are more than one ways to achieve a load. If the data volume to be loaded to the cube is not very high, like it is just a daily delta, you can even go ahead and remove the index deletion process.
Hope this helps...

File Export question and ID3 Tags

First question, have tried using Apple's recommended method of using QT Pro to export movies as "iPod" but when attempting to sync to an iPod get an incompatible file format. What is the "right" export option?
Secondly, on one file I've imported it into iTunes then set all the ID3 fields to my liking, then uploaded into iTunes U but the fields are incorrect. I've tried deleting the file from iTunes U several times and re-imported the file into iTunes and set the ID3 fields and still nothing. Any suggestions on how to get my file up and hold the ID3 fields info?
thanks
Jerry

http://www.oit.duke.edu/dms/resources/fileformats.html
http://www.oit.duke.edu/dms/itunesu/itunes_tagging.html
If you've been having ID3 issues with MP3s, that was recently corrected (well, just the album art thing, everything else worked as far as I know). I've had bad luck with third party ID3 tag editors, so we are recommending people do it through iTunes.app
Since you are already doing that, I'd be worried that my site was set to overwrite the tags (this is an option). If you're the admin, you can check it, otherwise you can ask them.

CPU Processing Distribution Question. Will 4 core VM use all physical cores on physical processor(s)?

Sorry if the title is vague, I am unsure how to properly word my question down to a single line. Anyways, on to my question, if I have two 16 core processors in a server, but I have 1 virtual machine that is setup with 4 cores, will the vmware only use 4 of the physical cores, or will the processing be distributed among all the cores? If searched the documentation but was unable to find much information about this specific situation. The reason I have it set to 4 cores instead of more is because the application I am trying to run only uses up to 4 core and if I can use vSphere to distribute out that processing it would greatly improve the performance. Thank you in advance.

Welcome to the Community - a VCPU can only run on a single core at a time - so your 4 VCPU vm will run only 4 of the 32 cores that are available in you ESXi host but each - the ESXi host is also smart enough not let the any of the 4 VCPUs share core either. By default the VM's VCPUs can be scheduled on any of the 332 physical cores
I am also moving your question to a more appropriate forum.

ICR Process 003 - question about data selection (table FBICRC003A)

Hello, I am implementing ICR process 003. We are doing several test and we I have some questions that I hope you can help me:
1 - If I run transaction FBICS3 - Customer/Vendor( Select Documents) and then FBICA3 - Customer/Vendor (Document Assignment ) several times (the same selection criteria) will the same documents be selected redundantly and will be stored redundantly in table FBICRC003A? I expected that this will not happen but It seems to happen in my test environment. (?)
2- If I need to delete the data stored in ICR '003' functionality I need to use transaction GCDE. The problem as I am using ledger '0L' for '003' process I cannot "delete data of one ledger" functionality -that allows to set selection data- and I have to "delete the data of an entire data group" that deletes all data stored in FBICRC003A & FBICRC003T tables. Should I set another ledger for '003' process in order to delete data using selection criteria? Is it recommended to not to use '0L' and create a new one?
I have read in reference documentation that "is not necessary to set up a SL", but since all my productive companies are running in the same client that is the ICR cliente I am wondering if could be better to create and set a SL.
Thanks in advance
Rafael Barreda
Edited by: Rafael Barreda on Sep 14, 2009 1:27 PM

Hi Ralph,
we have created a RFC in order to get data from client B to client A (where ICR system is placed). The summary is:
I need to import vendors/customer data from Client B that belongs to a certain company code "0001". The company is called "X" in both clients A & B although it only exists as a company code (FI) in Client B and just as a company (and trading partner) in client A.
Client A:
1- have set company "0001" as a "Company to be reconciled" at FBIC032:
RFC destination = ""
RFC destination for data selection = "ZRFC0001"
Local company= ""
Data Source="Documents of Current Process"
Separate Selection Process= "X"
Data Transfer Type="Asynchronous via Direct RFC Connection"
Sender field for reference number = "XBLNR"
Client B:
1- I have created the companies (V_T880) that I will need in order to inform trading partner on vendor's master data.
2- I have assigned company code '0001' to company "X"
3- I have assigned trading partners created on step 1 to vendors
4- I have post few FI documents with trading partners informed.
Then I run FBICS3 - Customer/Vendor: Select Documents in background but the programs takes a lot of time and do not select any document.
Do you think that I am missing something?
Thanks very much in advance.

Standard Midi File Import/Export Questions

Hi,
I'm having some trouble with Standard MIDI files, in that, after exporting them, and importing them back into another Logic project to test them, some of them will split/demix. That is, instead of one MIDI region appearing, it imports as two MIDI regions, with the notes of the part split between the two regions (the notes seem to split according to velocity, not note value).
Here is my question related to this:
Is it possible to export a Standard MIDI File for each "part" in a project, rather than one SMF for all the MIDI files in a project? (i.e., create one SMF for each software instrument track)? This is what I'm trying to do. The reason is that I'm trying to prepare and save some MIDI files to include with the audio files in a remix pack, and, since it's likely that the various remixers will be using different DAWs such as Cubase, I'm assuming that a SMF that includes all the various parts might not import into their program correctly. Is my assumption wrong? I.E., will most DAWs, like Cubase, etc., correctly import a SMF that includes all parts, and upon import split those parts correctly?
I'm following all the instructions for "Saving Standard MIDI Files" from the Logic Pro manual, except that I am not merging all the different instruments' MIDI regions together; I'm only merging each individual parts' MIDI regions.
Thanks!
Message was edited by: trobert225 - I accidentally posted before I finished the question.

Well I think the problem is solved. There was a conflict between Logic and iLife 06. I bought a new computer this week and had to load everything into it. I decided not to put in iLife 06 yet including Garageband and all the jam packs. I loaded all the new .caf files off the Logic DVD
I opened a midi file and all tracks loaded with Logic instruments. the problem was that a lot of the instruments had been erased somehow or over written by Logic studio. Now I believe they are all there and things are working as they should

How to export question

Quick question, I recently upgraded from FCE 2 to FCE 3.5HD. Before, when I was done with a project I would just export the sequence to Compressor and it would launch Compressor and have the sequence loaded in Compressor. Now with FCE 3.5, when I export my sequence, it launches Compressor, but it is blank. I do not know how to get me finished sequence in there....any help would be appreciated....

Export your movie as QT-movie, non-self contained or self contained (bigger file).
Open compressor and import the file.
Frank

Processing / exporting question

Similar Messages

Maybe you are looking for