Processing message characterastics not displayed in pi sheet

Hi Experts
I am working with a process Industry and need to maintain PI sheet which should contain dynamic function call for conformation,
processing data request and processing note and instructions for a single phase.For this I have maintained PI catagory type 1 , PI catagory type 2(prod_1),  and PI catagory type 6 (dynamic function call for conformation) for the destination 1 and assigned to a single phase.When I check in recipe
Simulation I am getting all pi notes , processing data request and dynamic function call in the PI Layout and do not find any errors.
But after I send the recipe using co53 and trying to maintain in co58, I am getting only dynamic function call conformation which I assigned
to the phase as a first PI Catagory but other processing  messgae request and Pi note  not displayed in PI Layout.
   Shall anybody explain the reason and solution for this which would be highly appreciated .
  Regards
  Srinivas

Hello,
Solution found :
You have to close/re-open the screen of solman_workcenter
Thanks,

Similar Messages

  • Some Text Messages do not display when using large font on iphone

    When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

    Hi Peter
    Actually, Captivate does have an essentially unlimited number
    of undo levels. But that number may appear to be different. The
    number of levels starts when you begin editing the project. If you
    close and re-open a project, that starts the undo process over.
    I've tested and I gave up after about 280 or so undos.
    Where Captivate doesn't allow an undo, it normally warns you
    with a rather catastrophic looking dialog.
    Cheers... Rick

  • LSO_CHECK_BOOKING custom error messages are not displayed

    Hi,
    Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
    Is there a way for me to display my custom error message instead of the predefined SAP message?
    Thanks a lot.
    Cheers,
    James

    Hi James,
    You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
    Learning Portal:
    The framework of the existing design of the Learning Portal does not
    allow customer specific error messages to be displayed in the portal.
    Only a generic message will be displayed when prebooking in the learning
    portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
    application does not expect to raise an exception from the BADI. If the
    BADI processing is assumed to be unsuccessful, the messages filled by
    the BADI will be ignored and a general error message will be displayed
    in the portal.
    So this is basically a design limitation.
    Administrator Portal:
    Have you tried e.g. the following notes?
    SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
    SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
    Regards,
    Agnes

  • Error Message is not displayed on the pop screen for chain end chain

    Hi,
    I have called a screen in one of the standard program using enhancmenets,
    and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
    but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
    regards
    afzal

    Hi,
    have you tried option "LIKE" with instruction MESSAGE.
    Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
    And instead of using a MESSAGE instruction, why to not use a popup ?
    Like using one of these function modules (for instance):
    TMS_BCU_POPUP_TO_CONFIRM
    POPUP_TO_CONFIRM_STEP
    POPUP_TO_DECIDE
    FC_POPUP_ERR_WARN_MESSAGE
    etc...
    If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
    Regards
    Mickael

  • My sent messages are not displayed...what happened and how do I restore?

    My sent messages are not displayed...what happened and how do I restore?

    http://kb.mozillazine.org/Disappearing_mail

  • Warning messages are not displayed in confirmation

    Hi,
    We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
    Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
    Thank you
    Natarajan

    Hi Muthu,
    Thanks for your reply. We raised the OSS message for this issue. As per  the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
    In the DELETE mode, the system will display only the first EXPRESS
    ERROR message and not WARNING messages.
    Inorder to maintain an error message as EXPRESS, the FIELD_NAME
    (i.e ls_message-field_name) has to be assigned with the value
    EXPRESS.
    For example,
    ls_message-msgty = 'E'.
    ls_message-msgid = 'ZF'.
    ls_message-msgno = '000'.
    ls_message-field_name = 'EXPRESS'
    Kindly note that in the DELETE mode, the system does not display
    EXPRESS message with msgty = 'W'.
    Only EXPRESS message with msgty = 'E' is recognised and displayed.
    The Warning messages will be displayed only during the CHECK mode.
    Thank You
    Natarajan

  • Messages are not displaying in  SXMB_MONI in R/3 system

    Hi,
          my scenario is  File -to Proxy (Inbound Proxy).. scenario is working fine... but those processed messages are not displyed in the SXMB_MONI screen in the R/3 System... .. but i wnat to see the messages in the R/3 system.. for this..any configuration is needed..  please suggest me..
    Regards
    Jain

    Thanks Aswin  and Praveen,
          Finally I got the messages in SXMB_MONI in R/3 system...  for that I added one more paramater additionally  along with  the parameters are suggested by  Mr.Praveen .. ..
    any ways.. these are the parameters  I added in the SXMB_ADM   for  your reference..
    category :RUNTIME parameter:Logging value :1
    category :RUNTIME parameter:Logging_sync value :1
    category :RUNTIME parameter:Trace_level value :1
    category :RUNTIME parameter:Logging_propagation value :1
    keep sharing the knowledge...
    Thanks
    Jain

  • SBWP: The content of message is not display

    Hi,
    The user use SBWP inbox. There the message is not display the content of the message.
    There I uninstalled and install again the SAP GUI and Windows, but there has been the same. Only the head of message is displayed.
    There can only print the content of message.
    What I have to do to display the content?
    Regards,
    Betta

    nyet wrote:
    Sir,
    When forwarding SMS as email, the content of the SMS is stored as an attachment called <primary_text.txt> file, it's double pain since the receiving person can not read the attachment via Z10 since the device can not open *.txt> file extension.
    If it's possible, please restore this functionality back to the way of OS 6/7, which put the content of the SMS in the body of email, since I do rely on this feature heavily.
    Leo 
    How exactly are you trying to forward an SMS as an email?
    You can forward the SMS to an email address of your choice and that`s when your SMS will be converted to MMS, and sent to the email address of your choice . The recepient should get your message as "[email protected] carrier.com   
    Another way of doing it is to select "Share" instead of forward. Then a list of options will open that includes your email address. Select your email address and the selected text message will be added as "body.txt" and after this, you just have to enter the recepient email address and subject line (optional).
    The recepient will receive the email with a "body.txt" attachment that can be downloaded and open in or with the "Notepad" on PC

  • My messages are not displaying, in the body of the message?

    When going to mail I see messages but the body of the message does not display.

    Try closing the Mail app completely and see if they show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Messages are not displayed in sxi_monitor transaction

    my scenarios are working fine, I verified with a file->XI->file scenario where a file is picked up from FTP and output file is created in target FTP site.
    But I dont see the messages relevant in the sxi_monitor, what could be the problem that monitor does not show processed messages.
    FYI, I can see the relevant message in the message displaying tool(MDT)
    Thanks
    KK

    hi
    Initially u said file-file msgs not in MONI.. now u said SOAP msgs not in MONI.. which one is correct?
    any how check this log from Michal.. it's good
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    Thanks-GS

  • Error message is not displayed

    Hi all,
    I am working on Tomcat server and JSP. i have created a web page using JSP and html. when i click on submit button, it should display the next page. if any error is there, it should display the error on the webpage. But, it is not displaying any error message.
    It just says :
    The page cannot be displayed
    There is a problem with the page you are trying to reach and it cannot be displayed.
    Please try the following:
    Open the localhost:8080 home page, and then look for links to the information you want.
    Click the Refresh button, or try again later.
    Click Search to look for information on the Internet.
    You can also see a list of related sites.
    HTTP 500 - Internal server error
    Internet Explorer
    i tried using one undeclared variable and try to navigate to next page, even then there was no error message like "variable not found".......it just gives the error message as above............
    I am not able to makeout where i am going wrong, what is the problem.....
    I am finding it very difficult to debug.
    please help !!
    regards
    ashvini

    .....what is jsp url ?
    orginal post of yours...
    when i click on submit button........
    which means that in your first page, you have a form with an action attribute that points to a jsp - that's what i meant by submit jsp url.
    and where can i find <tomcat_root>/log file ???Go to your TOMCAT installation directory, there would be a logs folder under that which in turn would contain your log files.
    ram.

  • Validation error message is not displayed for an attribute as an Input List Of Value

    Hi everyone,
    I use jdev 11.1.1.7.0
    In my application I've created an Entity Obj and a View Obj base Employees table.
    for the JobId attribute I've taken actions as listed below:
    1. in Employees EO I've created a validation for this attribute and in some cases an error message returns (the error message is "the salary is not high"):
         * Validation method for JobId.
        public boolean validateJobId(String jobid) {
            if (...) {
                return false;
            if (...) {
                return false;
            if (...) {
                return false;
            return true;
    2. in Employees VO  I've created a LOV for this attribute (the view accessor is JobsViewObj ) and I display the attribute as an Input Text with List Of Values.
    in jspx page I drag& drop this attribute as below:
              <af:inputListOfValues id="jobIdId"
                                    popupTitle="Search and Select: #{bindings.JobId.hints.label}"
                                    value="#{bindings.JobId.inputValue}"
                                    label="#{bindings.JobId.hints.label}"
                                    model="#{bindings.JobId.listOfValuesModel}"
                                    required="#{bindings.JobId.hints.mandatory}"
                                    columns="#{bindings.JobId.hints.displayWidth}"
                                    shortDesc="#{bindings.JobId.hints.tooltip}"
                                    autoSubmit="true">
                <f:validator binding="#{bindings.JobId.validator}"/>
              </af:inputListOfValues>
    I open the Popup and I select a row from the Popup list and then I click Ok. After that if the validation method(validateJobId) returns false, the error message("the salary is not high") must be show to the user. but the error message doesn't display. I don't understand why this happens.
    Can anybody guide me about this problem?
    Regards
    Habib

    yes, you're right, I've tested it in 12.1.3 and error message was displayed.
    it seems it's a bug(bad bug ) in both 11.1.1.7 and 12.1.2. and now what can I do? is there any way to display the the error message?
    Regards
    Habib

  • Suddenly, messages are not displaying correctly, how can I cure this?

    Messages have stopped displaying correctly, or, in some case, at all. The messages have downloaded OK. Even messages which were displaying correctly earlier, now don't. It occurred after 'finger' problems - I tried to type something into Firefox but failed to change focus from Thunderbird to Firefox first and have obviously changed some setting. What can I do to restore normal behaviour?
    I have tried uninstalling and reinstalling, and even deleting all references I can find to Thunderbird from the AppData folders in the users directory all to no avail.

    Thank you for the suggestions. They did not cure the problem, but that is because I think now that there is no problem; Thunderbird is working normally. It appears to have had a temporary glitch and has corrupted 8 or 9 messages around the one I was viewing when I hit wrong keys. The corrupted messages seem to contain the headers of dozens of other messages, some quite old. Apart from those few messages, all others in the root inbox folder and in all sub-folders seem OK.
    Thanks again for trying.

  • Messages Does Not Display Contact Card

    When I message someone or they message me to/from my Messages App on my MBP Messages will not fill in their contact information from my contacts. The only exception to this is when I am messaging someone who uses their email as their iMessage/Messages primary address.
    For example, if I am messaging my friend who has an iPhone and their primary form of contact is their phone number then they show up as a phone number in my Messages app on my computer. However, on my phone they show up with their contact information filled in and the messages usually sync (sometimes there is issues where my computer will take me back to the last place I sent a message on the computer even though it has synced all of the messages I have also sent from my phone that day.) *See Screen Shot 1 Below*
    The opposite example is if I am messaging someone who has set their primary contact information to be their email address. In this case, Messages will add their contact information and picture to the message thread similar to "Brent" and "Mom" in Screen Shot 2  below.
    I don't know what else to do. I've tried restarting the app. Deleting message threads and restarting them. I cannot find other people who are having this issue as well. I'm just trying to figure out why my messages won't sync contact info. It all started when facebook updated their syncing with contacts. And yes, all of these phone numbers are in my contacts and assigned to contacts with pictures both on my phone and synced to my MBP.
    Screen Shot 1
    Screen Shot 2
    Screen Shot 3 (My current system Settings)

    Hi,
    Not sure I would have got that one.
    Can't say I have seen it before.
    Custom in Language and text can mean two things.
    1) You have either added things to particular Displays  (such as day and Date to the Time display)
    2) You can changed something like a Measurement setting from British Imperial to Metric
    There are other "tweaks" such as using a Chinese Calendar whilst saying you are in the US.
    I have mine set to United States so I can use the AIM SMS "feature"  in Messages.
    8:45 PM      Friday; July 19, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • VZ Messages contacts not displaying

    When I receive a message from one of my contacts the notification on the lock screen shows the message with the sender's number but does not show the name.  When I open the VZ Messages app the contact names show properly.  How do I get the lock screen VZ Messages notifications to display the name?

        We want you to use the app that fits your needs best, DerekU. The native application Ada had suggested is what generally controls the notifications on your phone and will display any contact names you have on your phone. If you're using Verizon Messages, the contacts may only show the name if they were synced with Backup Assistant instead of iTunes/iCloud or another 3rd party option. If you go into www.vzw.com/verizonmessages, do you see the contact names or the numbers in your message list?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

Maybe you are looking for