Processing Message in PI priority wise

HI All
This is one concern regarding processing of particular file in simple FILE to FILE scenario and its goes like this
If i have many input files to be processed but the processing of these files will depend on particulars ( properties )of file like ,for eg. the file of biggest size will be processed first then the next ....and so on. So how to set the prority of processing of messages
Thanks
Abhishek

XI will process the file irrespective of file size and whichever file it find first.
bt if u wanted to priortized messages in XI then u can refer the below links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413
How to prioritize messages in XI
let wait for others to give their views.
chirag
Edited by: Chirag Gohil on Oct 31, 2008 8:17 PM

Similar Messages

How to keep waiting time between processed messages !!

Hi Folks,
I have got one scenario required waiting time between processed messages. The problem as follows !!
File --> Proxy scenario. I receive 15 messages from sender side (same messages structure) so working with one interfaces. File picking and transforming this message and split into 2 messages. messages are receiving to receiver. I am using BPM with 7,8 steps like receiving step, block , message transformation step , internal block 1 for sender 1, internal block 2 for sender 2.
All things are working fine, messages are going to receiver properly. But customer requirement is , wait step required between processed messages before sender1. I have put wait step still, PI picks all messages in one shot processing and waiting for 2 minutes, after 2 minutes sending all messages at the same time, this process is not working.
I have tried with wait step in mapping (Sarvesh) given excellent idea, still PI works the same way.
Can someone please explain a bit why the messages or not waiting message by message. I am using EOIO with Queue name and file process mode "BY NAME" and I have tried "BY TIME" as well. I have given priority to this Queue. On BPM Queue assignment : One Queue.
Please I am expecting positive answer !!
Many Thanks in Advance
San

Hi Rudolf Yaskorski ,
Not sure about your PI release and BPM model, do you create separate process instance for each file, or do you process files collecting them in one single instance? Are you using parallelization within your ccBPM ?
I am using serialization, I don't think bpm can do Parallization until PI 7.0, but PI 7.11 has got has queue assignment. But I am using one queue. This must be serialization.
To me it looks like your issue is not in ccBPM but rather more in polling files (as per your post file CC polls all 15 files in one shot). So if you wish to poll the files not at the same time some workaround is required. Possible options you could check out:
A. Either implement "wait" in your mapping based on file name or other criteria (e.g. directory name). Check out if respective BPM instances are really created at different times.
I have used wait step in mapping. These 15 messages has to go through one interface. So I am using one interface. But I have checked mapping process time in all messages on receiver system. Shows same timing, even though I put 40000 ms waiting time in mapping.
B. Try polling different files (or use different directories) with different channels and coordinate starting / stopping of your channels by scheduling availability for each CC in RWB. E.g. you poll file 1 with CC 1. You start 2 minutes later CC 2 and poll file 2. And so on.
I am not clear about this . On BPM waiting step is working and it keeps wait all messages, which are coming through one interface. Then it releases all messages at the same time.
I don't know how to resolve this. I have tried with Transport acknowledgment, but all messages are going to reciver system waiting at receiver system in priority queue and processing in EOIO, but taking so long. Rather all messages go and sits in queue, I want to stop messages by message with 2 minutes time gap. How please?
Kind Regards
San

Process Message Processing delay

Can anybody explain, why does it take longer time in SAP for a process message to process successfully?
In CO54 - From the moment it gets created (yello light) to the moment when it is successfully processed (green light). We have an issue in one of the plant where it takes upto 3 to 4 hours to process the message. It is mainly for PI_PROD message category and it happens for only fewl PI_PROD process messages.
It is only happening for one plant though.

Ok, I found the solution.
There is batch job that is scheduled at client level and its priority is "Medium".
- We changed the priority to "high" (still waiting to see if this helps)
- If the above solution didn't work then schedule batch job at plant level instead at client level [SAP Recomended] (This should defintely solve the problem)

Want to know the Processed Messages Size in XI server

Hi,
I want to know about the Processed messages size per month at my PI server . Per day theer are more than 50,000 mesages are processing and each message size averagely 10 KB . But I want to Know exactly How much GB it has Exchanged throgh my PI server at last month. For this where can we check this.
I had tryd using teh Performance Monitoring at RWB . but it is giving Interface wise or some average size. But i want the exact cummulative size for day wise and Month wise.
I steher any way to check this at OS level. ?
please help me regardiong this.
regards
Jain

Goto RWB -
> performance monitoring -
> give display as overview aggregated , time interval and aggregation interval as 1 month.
this will give the result u want....dnt give interface name...
Regds,
Pinangshuk.

No Disk error/Exception Processing Message keeps appearing

THIS IS A BUG!
When I have a song listed in itunes but it can't find it on my hard disk, I get the message:
WINDOWS - NO DISK
Exception Processing Message c0000013 Parameters 75b6f9c 756bf9c 75b6f9c
CANCEL TRY AGAIN CONTINUE
This used to cause my system to HANG everytime it appeared. (Needed a COLD REBOOT.) I reinstalled itunes and now it doesn't hang, but the message shows up frequently! What a pain!

I get this same message every time I start iTunes. It started happening after my most recent update of QuickTime. I have removed and re-installed both iTunes and QuickTime but I continue to get this exact error message.

Confirmation of by-product via process message

Hi All,
what are the parameters - characteristic values that needs to be passed for confirmation of the by product via process message ?
Regards,
PSS

Hi,
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with
531 (instead of 261 ). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as an 'other goods receipt'.
Possible special stock indicators:
E, Q
Thnaks,
Vinodh

Function modules used in process message categories

Hi Gurus,
in process message characteristics, we need to assign the function modules. please advise is there any place (sap system or any website) where we can find all the function modules which are used in pi sheets? i want to know function modules and their uses or how to use them in pi sheets? if i want to develop new function modules, what should be the criteria, please guide me. thank you for the support.

Hello
In addition, on transaction O13C you will find the process message categories and which message destination is assigned to each category.
Here is the documentation of the message categories:
Predefined Process Message Categories - PP - PI-PCS Interface: Linking of Process Control Systems - SAP Library
BR
Caetano

Error while processing message to remote system

Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
Raghavendra

Hi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha.

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error while processing message payload Element 'CategoryCode&#39

Hi Experts,
I am trying to integrate SAP ECC with TM. I have transferred the sales order from ECC to TM, but its not triggering order based transportation requirement (OTR) instead giving an error Error while processing message payload Element 'CategoryCode&#39 and all the xml messages are stuck in inbound queue. The screen shot of the issue is as appended herewith. Please advise.
Thanks & Regards,
Aunkur De

Hi Aunkur,
The issue will generally come when a mandatory field in XML which you are not sending either or missed.
Please check if all mandatory fields are mapped properly.
Best regards,
Rohit

Error while processing message payload Element PI SXMB_MONI (ECC to TM)

Dear Experts,
while processing an XML message in TM using receiver interface IntracompanyTransportationRequestRequest_In , we encounter an error message.
<SAP:Stack>Error while processing message payload Element 'StockTransportOrderReferenceIndicator' missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
ssee screenshot attached.
The field StockTransportOrderReferenceIndicator cannot be located in ECC and I cannot find what the system is expecting to populate here.
Can somebody propose an approach on how to investigate into this error message for the solution?
thanks a lot
Salvador

Hi Salvador,
Thanks for your reply. We were able to fix that issue. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise. Did you happen to face any similar kind of issue during your implementation ?
Thanks & Regards,
Aunkur De

Error while processing message

I have WS2RFC interface that use to work. I recieve in the RWB this error message from the RFC Reciever.
10/6/08 1:20:10 PM aa98b6f0-9398-11dd-94cf-0017a43cc516 Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.
any ideas?
Kfir

In RFC channel increase the maximum connections paramter value to 5. Save and activate.
Thanks,
Gujjeti

JBO 29114 ADF context is not set up to process messages

Hi,
I have created a Rest web service and hosted it on my own IP address..
I am trying to create a mobile application using the URL data control for the rest service created.
I get the below error when I do so:
*"JBO 29114 ADF context is not set to process messages for this exception.Root cause error code is DCA - 50000."*
The jdev version I am using is 11.1.2.3 and I have created it successfully in Jdev 11.1.1.4.
Also I have set proxy settings in my HTTP Analyzer and 'Web Browser and Proxy Settings'.
The proxy seems to work fine and also I have tested the rest service.It seems to be ok.
Please advice on the error msg.
Thanks in advance,
Malathy.

Malathy,
as you use a version which is not available to the public (us) I assume that you are an Oracle employee. In this case you should ask this on an internal forum.
Timo

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

TO not printing in background processing of process message

Dear Experts,
We are using PI sheets and process messages to do GR (WM) and then put away to a destination storage bin. TO is getting printed in the default user profile printer when user is manually sending process message in CO54. But not getting printed when processed by a background job(RCOCB004). We tried even after maintaining the printer in background user but of no use. It only generates the spool and no direct print happening. Kindly let me know if this is the std SAP behavior and any way to control this.
Thanks
Rijil

hi, thanks you reply.
default delete job is ok.
but
default archive job does not work.
the followding error occured in log.
Executing ArchiveJob (arvhive job) failed. Reason: java.lang.NullPointerException
and i have configed something according to:
[http://help.sap.com/saphelp_nwpi71/helpdata/en/2f/88084136b5f423e10000000a155106/frameset.htm]

Processing Message in PI priority wise

Similar Messages

Maybe you are looking for