Processing multiple conditions

I hope you RH wizards out there can help me with one last
problem. I've just spent the last week merging 3 RH5 projects into
one RH6. I have conditional tags for AppA, AppB, and AppC. Some
topics and some text in a couple topics are tagged for AppA and
AppC. However, when I generate the help for App A , none of these
topics or text are included in the output.
Please tell me that I'm wrong here, but my guess is that
because my Single Source Layout says "Not AppB and Not AppC" RH is
throwing out EVERYTHING marked AppC, even though some of it is also
marked AppA. That just has to be wrong. Can someone please tell me
I'm wrong and what I've missed to make this work?

Thank you for the responses. I went back to the dialog to
define the conditions of the layout and realized it is definitely
an exclusionary system. I am now (on my last day at this job) in
the process of creating additional tags with every possible
combination of the three original tags and retagging the entire
system. Not the amount of work I wanted for the last day, but ....
Along those lines, I'd like to commend the members of this
forum for the helpful responses in the last couple weeks. I really
did jump into RH6 with no POC effort and no time for trial and
error to figure it out. I've posted here multiple times recently
and someone has been there to help each time. Thank you.

Similar Messages

Multiple condition : Error when starting a SWITCH branch

Hi,
In our Z Leave Workflow,I am facing the errors listed below.
Error when starting a SWITCH branch
Error during CASE evaluation in SWITCH mode for node 0000000158
Operator 'EQ': The value of the left operand cannot be determined
Error in the evaluation of expression '<???>&REQ.STATUS&' for item '1'
Unable to determine the value of component ''
It gives error in Multiple condition Request Approved? which is similar to standard WF12300111 node number 158 (u can say copy of WF12300111
This multiple condition works in some scenario But it gives dump at other scenario .
I have checked the value of REQ.STATUS in runtime. It populates the value as 'POSTED' in runtime,
Please suggest if any solution on this.
Regards,
Kalpesh

Hi There was some problem with task which was comprising class CL_PT_REQ_WF_ATTRIBS and APPROVE method. This method is to change the status of particular leave workitem.After running this particular task ,the status was not changin instantly.This method locks particular workitem and was releasing the workitem once the WF gets completed.Hence I was getting REQ.STATUS as sent.
I have changed that task with following code in new task...
DATA:
      REQUEST_ID TYPE PTARQ_DEDUCTION-REQUEST_ID,
request      TYPE REF TO if_pt_req_request,
    new_status   TYPE tim_req_status.
SWC_GET_ELEMENT CONTAINER 'REQUEST_ID' REQUEST_ID.
CALL FUNCTION 'ENQUEUE_EPTREQ'
    EXPORTING
      mode_ptreq_header = 'E'
      request_id        = request_id
    EXCEPTIONS
      foreign_lock      = 1
      system_failure    = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
    MESSAGE w058(hrtim_abs_req) WITH request_id.
ELSE.
CALL METHOD ca_pt_req_header=>agent->get_request
      EXPORTING
        im_request_id = request_id
      IMPORTING
        ex_request    = request.
execute state transition
    CALL METHOD request->initiate_state_transition
      EXPORTING
        im_transfer_event = 'APPROVE'
      IMPORTING
        ex_new_status     = new_status.
COMMIT WORK.
    CALL FUNCTION 'DEQUEUE_EPTREQ'
      EXPORTING
        request_id = request_id.
ENDIF.
This will create new status for leave item during WF processing.
Apart from that also added Wait for 2 minutes after that task....
Thanks for your help.
Regards,
Kalpesh

Multiple conditions in a filter of Bursting control file

Hi All,
I am trying to use multiple conditions in a filter of Bursting control file and it throws me an error.
Can you please correct me on this.
<xapi:template type="rtf" location="xdo://AR.XXRAXINVOPCO.en.00?getSource=true" filter=".//G_INVOICE[BILL_CUST_NAME='ABC COMPANY'] and .//G_INVOICE[BILL_CUST_NAME='ABC COMPANY']">
Thanks,
--John.

I have made little progress and now I am able to connect to the printer but its not printing.It prints a blank paper saying this printer is not setup for direct PDF printing.Can anyone help?
[073112_025517889][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] initConfig(): loading default properties :{TEMP_DIR:String=/usr/tmp, BUFFERING_MODE:Boolean=true}
[073112_025517890][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :ipp_printer
[073112_025517890][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[073112_025517890][][STATEMENT] status message:
[073112_025517890][][STATEMENT] xdo.bursting.IPP_RESPONSE_CHECK_INTERVAL=null
[073112_025517890][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Called
[073112_025517890][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] setDefaultServerProperties(): Default properties of server 'xslcisd2' are loaded. {URI:String=ipp://xslcisd2.southernco.com/ipp, server-type=ipp_printer}
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] setDefaultServerProperties(): properties defined in this request.
[TEMP_DIR:String] [usr/tmp/073112_025446100]
[server-type] [ipp_printer]
[ASYNC_CHECK_INTERVAL:Integer] [60000]
[SERVER_NAME:String] [xslcisd2]
[IPP_ATTRIBUTE_CHARSET:String] [utf-8]
[IPP_DOCUMENT_FORMAT:String] [application/octet-stream]
[BUFFERING_MODE:Boolean] [true]
[IPP_USE_CHUNKED_BODY:String] [true]
[URI:String] [ipp://xslcisd2.southernco.com/ipp]
[IPP_HTTP_RESPONSE_CHECK_INTERVAL:Integer] [0]
[TEMP_FILE_PREFIX:String] [dlvr]
[IPP_COPIES:Integer] [1]
[RETRY:Integer] [0]
[RETRY_INTERVAL:Integer] [60000]
[TEMP_FILE_SUFFIX:String] [.tmp]
[IPP_USE_FULL_URL:String] [false]
[ASYNC_TIMEOUT:Integer] [86400000]
[IPP_NATURAL_LANGUAGE:String] [en]
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): BUFFERING_MODE is ON.
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): TEMP_DIR found, start document buffering : /usr/tmp/073112_025446100
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): Starting document buffering.
[073112_025517893][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): Creating temporary file for buffering : /usr/tmp/073112_025446100/dlvr67s66bXmwi8695010679275918372.tmp
[073112_025517894][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): 69429 bytes have been written to the temporary file.
[073112_025517894][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] filterDocument(): Starting document preprocessing.
[073112_025517894][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] filterDocument(): No native command found for preprocessing, exiting.
[073112_025517895][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): Finished document buffering.
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Start reading the buffered document file. : /usr/tmp/073112_025446100/dlvr67s66bXmwi8695010679275918372.tmp
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Calling DeliveryRequestHandler.submitRequest()
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Called
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Opening HTTP URL: http://xslcisd2.southernco.com/ipp
[073112_025517904][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): IPP request dump:
IPP version: 10
operation id: 02
charset: utf-8
request id: 3
-- operation attrs --
[1]attributes-charset:utf-8
[1]attributes-natural-language:en
[1]printer-uri:ipp://xslcisd2.southernco.com/ipp
[1]document-format:application/octet-stream
-- printer attrs --
-- job attrs --
[1]copies:1
[073112_025517904][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): HTTP chunked mode : true
[073112_025517904][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): IPP request header length : 181
[073112_025517905][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Opening HTTP client.
[073112_025517905][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openRequest(request) called
[073112_025517905][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openConnection() called - opening xslcisd2.southernco.com:80
[073112_025517905][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openConnection(): Start non-SSL connection.
[073112_025517908][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] generateRequestHeader() called.
[073112_025517908][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] generateRequestHeader(): generated request header
POST /ipp HTTP/1.1Host: xslcisd2.southernco.com
User-Agent: Oracle XML Publisher 5.6.3
Connection: Keep-Alive
Transfer-Encoding: chunked
Content-Type: application/ipp
<<<
[073112_025517909][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openRequest(): using ChunkedOutputStream.
[073112_025517909][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Writing the document to the server stream.
[073112_025518090][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): 69429 bytes have sent to the server.
[073112_025518090][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] submitRequest() called
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] submitRequest(): pIn.available(): 445
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] Constructor called
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse() called
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] pIn.available(): 445
[073112_025518123][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [HTTP/1.1 200 OK]
[073112_025518123][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse() 1st line of response header: [HTTP/1.1 200 OK]
[073112_025518124][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Content-Type: application/ipp]
[073112_025518124][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [content-type][application/ipp]
[073112_025518125][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Cache-Control: no-cache, no-store, must-revalidate]
[073112_025518125][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [cache-control][no-cache, no-store, must-revalidate]
[073112_025518126][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Expires: THU, 26 OCT 1995 00:00:00 GMT]
[073112_025518126][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [expires][THU, 26 OCT 1995 00:00:00 GMT]
[073112_025518127][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Content-Length: 242]
[073112_025518127][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [content-length][242]
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Server: Allegro-Software-RomPager/4.34]
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [server][Allegro-Software-RomPager/4.34]
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : []
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse(): end of HTTP header
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse(): HTTP response body ascii dump
0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x03 0x01 G 0x00 0x12 attributes-charset 0x00 0x05 utf-8H 0x00 0x1b attributes-natural-la
nguage 0x00 0x05 en-us 0x05 ! 0x00 0x06 copies 0x00 0x04 0x00 0x00 0x00 0x01 0x02 E 0x00 0x07 job-uri 0x00 ,http://xslcisd2.so
uthernco.com/ipp/IPP_Job_8! 0x00 0x06 job-id 0x00 0x04 0x00 0x00 0x00 0x08 # 0x00 0x09 job-state 0x00 0x04 0x00 0x00 0x00 0x03 D
0x00 0x11 job-state-reasons 0x00 0x04 none! 0x00 0x1a number-of-intervening-jobs 0x00 0x04 0x00 0x00 0x00 0x04
0x03 <<<
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] Exiting Constructor
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() called
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() exiting
[073112_025518133][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Closing HTTP client.
[073112_025518134][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): IPP response dump:
IPP version: 10
operation id: 01
charset: utf-8
request id: 3
-- operation attrs --
[1]attributes-charset:utf-8
[1]attributes-natural-language:en-us
-- printer attrs --
-- job attrs --
[1]job-uri:http://xslcisd2.southernco.com/ipp/IPP_Job_8
[1]job-id:8
[1]job-state:3
[1]job-state-reasons:none
[1]number-of-intervening-jobs:4
[073112_025518134][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Exiting submitRequest()
[073112_025518134][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() called
[073112_025518135][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() exiting
[073112_025518135][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Finished calling DeliveryRequestHandler.submitRequest()
[073112_025518135][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Process done successfully. Exiting submit()
Thanks,
--John.

Multiple conditions while taking export

hi,
when i'm trying to take export using multiple condition,
< EXP query='where branch_code=0130 and loan_date> 01-jan-2005' file=d:\yyy tables=xxxxx>
I get an error 'failed to process parameters'
can anybody help me to solve this
Regards

hi satish
this is the exact query
EXP query='where branch_code=0130 and loan_date> 01-jan-2005' file=d:\yyy tables=xxxxx userid=zz/xxx@test
server and client -9i

Multiple Conditions\Actions in a Workflow

I am in the process of creating an expense approval form with a workflow that has two Approval stages. In the first stage, however, the approver would be dynamic based on a selection in the form. The second stage approval would go to the same
person\group. What's the best\correct way to do multiple\conditions\actions in a single step? As an example of the workflow:
If Field1 equals Value1 Assign a task to Person1. If Associated Task is Approved create a new Task and Assign it to Person 10
there would be about 12 different iterations of the first step, Value2 Assign to Person 2 and so on.

Hi pjs, it depends on who the person is/how they're related to the selection on the form. If it's the user's manager, you can get that information by using the link below. If there's no real correlation to the selection made, then you'd have to make a list
with two columns- "selection" and "person to email." Then check that list against the selection and get the corresponding email for the particular approver.
http://www.sharepointanalysthq.com/2011/04/user-profile-data-in-sharepoint-designer-workflows/
cameron rautmann

Error in multiple condition type switch

Hi,
I define a multiple condition as a switch for different processing branches for my
Workflow (all my attributes in the conditions are from the object).
I defined the Other Values outcome also.
When one of the conditions is true I received an error SWP103 "Error when starting a SWITCH branch"
It works fine when my process go to "other" outcome.
Thanks in Advance,
Ronit.

In my workflow the same error occured while using a mutliple condition with type Switch.
A short explanation of my workflow:
- container operation: errorcounter = errorcounter + 1
- multiple condition
1. errorcounter =< 4
2. errorcounter = 5
3. other values
- activity
- loop until (depending on outcome activity).
The first time while executing the loop went perfect, but the second time it failed and based on the message I guess it failed on the multiple condition. What I also notices in the technical view was that the errorcounter wasn't updated.
I guess the container operation and multiple condition bumped into eachother (somehow?) and caused the error.
My solution:
Put a wait stap between step 1 and 2 and it works fine.
I'm not sure this case is applicable to you, but may be a hint in the right direction. Good luck!

Error on multiple condition

Hello all
I'm having trouble with a multiple condition. I have 4 possible outputs, but in one of them the workflow is terminated, and there is no any instruction set to do this. Any ideas on what is going on?.
Regards IA

Please analyse the Workflow Log and also the Workflow design from PFTC_DIS.
Following reason can result into this
1)Use of Process Control step which is not displayed in |Wflow log
2) Use of wait for event step in a fork as well as triggering of the event
3) Triggering event that is a terminating event of the task placed in 1 branch of the condition step.
Thanks
Arghadip

If Statement Multiple Conditions

Using LiveCycle, FormCalc or JavaScript.
I am trying to create an if statement with multiple conditions.
a Sum field calculates a series of numeric input fields. I want the result in the Sum field to determine the expression in a final field.
If the Sum is <30MM then "50000" also if the Sum is >30MM but <60MM then "125000" also if the Sum is >60MM but <100MM then "250000" also if the Sum is >100MM but <300MM then "375000" also if the Sum is >300MM then "500000"
I have only been able to figure out a single if then for the first condition but not able to include the whole set of conditions and the multiple results.
Help would be much Appreciated!
Thank you in advance.

Tried a few variations of this and still seem not
to be able to find a solution to this issue. I'm surprised my google searches are bringing up better examples because there seems to be an example of everything else.
Any more detailed advive?

How can I pass multiple condition in where clause with the join table?

Hi:
I need to collect several inputs at run time, and query the record according to the input.
How can I pass multiple conditions in where clause with the join table?
Thanks in advance for any help.
Regards,
TD

If you are using SQL-Plus or Reports you can use lexical parameters like:
SELECT * FROM emp &condition;
When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
SELECT &columns FROM &tables &condition;
But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
Best of luck!

Multiple conditions for the same button.

Is there any way you can have multiple condition (same type of the condition).
I have button that I would like to hide it at different stages.
For example I would like to have a button (Submit) which will be visible when
Status = Draft
Condition Type Value of Item in Expression 1 = Expression 2
P9_X_STATUS
Draft
and when also when userRole = author
Condition Type Value of Item in Expression 1 = Expression 2
P9_X_USER_ROLE
Author
Robert

Hi,
It would depend on when the fields get their values into the session. They may be below the button on the page but if they have a value in the session then the button's condition will see this.
If, however, you have only used a Default Value setting for the item, the value may not be in the session (even though it may be displayed on the page), so the button will not know about this value. In these cases, I set the default value using a page computation for that item that runs "On Load Before Header" and is conditional on the item being null. That puts the value into the session for other items to use if required.
Andy

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

Can't process multiple files on one of three catalogs

After getting straightened out about getting my catalogs in order, which I've done, I've run into another problem. I have three catalogs one for People, one for Things and one I call Workplace where I try out things that are new to me so I don't mess up my main catalogs.
I've straightened out the files in my Things catalog. I have one catagory that contains images of autograph book pages from the late 1800s. Those scans were done in JPEG some time ago. I've tried using multiple processing to change these 55 images to psd in the original file to be consistent with the rest of the catalog. Each time the process fails.
In order to see what the problem might be I have copied the catagory file into both of my other catalogs and have been able to process the catagory file back into itself as psd. I have also created another small file in the Things catalog and tried to convert it and had the same result. The warning info box that appears when copying back into the same file states that the original files will be overwritten. The psd files do not overwrite the jpg files. They are added to the original file. That may be the way it is intended to be. That's not a real problem.
The real question is why can't I process multiple files in the original catalog. I have looked at the error file and, although I don't know much about most of it, I found the following in the first part of the file.
crash exception="EXCEPTION_ACCESS_VIOLATION"
I run XP SP3 and PSE 8. I am a single user with administrator rights. I find no mention of a permission filter in the PSE 8 program.
I'm stuck until I solve this problem and I need help getting it done. Any suggestions or information will be greatly appreciated.
Message was edited by: Minocq

One thing to try : instead of using 'process multiple files', can you use the 'export' feature in the Organizer to export the jpegs of that category in psd format into a new folder ?

How to process multiple rows of data into a single string

Hello,
I am trying to process multiple rows of text from an Oracle database into one field to display on a report as continuous text. Below is sample data. The text field is 55 characters wide so anything longer is broken into multiple rows. I need to recombine it for display.
line          text
1             IN THE N.E. QUADRANT OF THE INTERSECTION OF THE FAIRFAX
2              COUNTY PARKWAY AND THE DULLES AIRPORT ACCESS AND THE T
3             OLL ROAD AND SOUTH OF SUNSET HILLS ROAD
I tried creating a formula field but it did not work, below is the code in Visual Basic syntax. I also tried using the Maximum() and UBound() functions without luck. I don't quite understand how to make the UBound() work; it threw a lot of errors.
Dim i As Number
Dim strLocDesc As String
For i = 1 To count({LDS_AR_RL_COMM.ART_LINE_NUM})
    strLocDesc = strLocDesc & {LDS_AR_RL_COMM.ART_COMM_RMK}(i)
Next i
formula = strLocDesc
Any ideas on how to solve this?

Hello Allison,
You can try this:
Create a formula called @StoreText, place it in the details and have the following code in it:
WhilePrintingRecords;
Global StringVar Text1;
Global StringVar TextRest;
if {field.line} = 1 then
Text1:= {field.text} else
if {field.line} >= 2 then
TextRest := TextRest+" "+{field.text};
In the Group Footer you can have a formula called @GetStoreText with the following code in it:
WhilePrintingRecords;
Global StringVar Text1;
Global StringVar TextRest;
Text1+varTextRest;
See how that works out for you.
Regards,
Zack

Deleting data from another table with multiple conditions

Hi frnds
I need to delete some data from a table based on multiple condition I tried following sql but its deleteing some rows which is not meeting the criteria which is really dangerours. When i trying = operator it returns ORa- 01427 single -row subquery returns more than one row
delete from GL_TXNS
where TRN_DT in (Select trn_Dt from GL_MAT)
and BR in (select ac_branch from GL_MAT)
and CODE in (select CODE T from GL_MAT)
and (lcy_amt in (select lcy_amt from GL_MAT) or
fcy_amt in(select fcy_amt from GL_MAT)
rgds
ramya

My answer is the same as Avinash's but I will explain a little bit more.
ORa- 01427 single -row subquery returns more than one rowmeans that you have a subquery that Oracle is expecting one value from that is returning multiple values. In your case you need one value for the equijoin ("=") and you are getting more than one value back. The error happens even if all the values are the same - multiple values being returned will cause the error.
The solution is to either allow multiple values to be returned (say, use the IN condition istead of "=") or only return one value if possible (say, forcing one value by using DISTINCT, GROUP BY, or a WHERE clause condition of ROWNUM=1) - but these workarounds must be checked carefully to make sure they work correctkly

Mail step should be sent to all the users in multiple condition

hi experts,
                  I have a requirement on invoice posting.Say if invoice amount is 1000 then person A can post the invoice.
if >= 1000 person B can post the invoice.
If >=2000 person C can post the invoice.
                                                                  what i have did is, created a multiple condition and then based on the inv amount assigned 3 methods for invoice posting.My problem is if a person posts an invoice amount of 1000.A mail has to be sent to Person B and C informing that an amount of 1000 is posted with user id.Same for person B, ie mail should be sent to person A and C informing regarding invoice posting.Now inside the multiple condition i cannot assign mail step.Coz based on the condition it will go to a particular user for invoice posting but where as mail should be sent to all the users.So how can i achieve this??.

Hi Priyanka,
I am getting 1 thing why you need need multiple conditions. No need to create any multiple conditions.
1. Create a rule using transaction PFAC. (you can use the example as Rule: 0000168).
    a. Create an function module with table parameters as ACTOR_TAB (type SWHACTOR) and AC_CONTAINER (Type
        SWCONT). You can aswell copy the FM used in 168 rule and change it. check the logic mentioned below.
    b. In PFAC transaction, go to container tab and create 2 container elements. For amount and Mail_indicator (type should be
        same as that of the amount field in your workflow) .
2. Use this Rule in your workflow to send mail.
Logic:
""Lokale Schnittstelle:
*"       TABLES
*"              ACTOR_TAB STRUCTURE SWHACTOR
*"              AC_CONTAINER STRUCTURE SWCONT
*"       EXCEPTIONS
*"              NOBODY_FOUND
INCLUDE <CNTAIN>.
DATA BEGIN OF ORG_OBJECT OCCURS 0.
          INCLUDE STRUCTURE SWHACTOR.
DATA END OF ORG_OBJECT.
DATA: BEGIN OF NEW_AC_CONTAINER OCCURS 3.
          INCLUDE STRUCTURE SWCONT.
DATA: END OF NEW_AC_CONTAINER.
DATA: V_AMOUNT TYPE <AMOUNT FIELD>.
DATA: V_MAIL_INDICATOR TYPE <FLAG>.
REFRESH: actor_tab.
Get the org-object under consideration. AMOUNT is the container name defined in your PFTC transaction
SWC_GET_ELEMENT AC_CONTAINER 'AMOUNT' 'V_AMOUNT'.
Get the org-object-type and the org-object id.
SWC_GET_ELEMENT AC_CONTAINER 'MAIL_INDICATOR' V_MAIL_INDICATOR .
Pass the org-object, the org-object-type and the org-object-id
to a new container.
The org object get a new name: ORG_AGENT.
SWC_SET_ELEMENT NEW_AC_CONTAINER 'AMOUNT' 'V_AMOUNT'.
SWC_SET_ELEMENT NEW_AC_CONTAINER 'MAIL_INDICATOR' V_MAIL_INDICATOR .
check for V_AMOUNT and V_MAIL_INDICATOR.
if the v_amount = 1000 .'
if v_mail_indicator = ' '.
    actor_tab-OTYPE = 'US' .
    actor_tab-OBJID = 'SAPUSER1'.
    append actor_tab
else.
    actor_tab-OTYPE = 'US' .
    actor_tab-OBJID = 'SAPUSER2'.
    append actor_tab
    actor_tab-OTYPE = 'US' .
    actor_tab-OBJID = 'SAPUSER3'.
    append actor_tab
endif.
endif.
Similarly write the logic for other conditions.
This way you can use same for different purposes.
If you pass the indicator that means you are sending mail to other approvers for information.
Revert back if u need more help.
Regards,
Gautham

Processing multiple conditions

Similar Messages

Maybe you are looking for