Processing of two routing steps in BOM at the same time .

Hello,
I have two routing steps with different resources for an item but I process them parallelly. I know that I cannot duplicate the sequence number. How can I achieve that in BOM?
Thanks,
Sean

Hi Sean,
I assume your routing steps are two operations.
I think in Discrete Manufacturing there is a way to define parallel resources. This can extend across operations, so from a scheduling perspective, you can schedule two operations in parallel. So for example, if the resource at operation 30 is scheduled to overlap the prior resource at operation 20, the two operations would effectively be scheduled in parallel.
The limitation is that you still need to report the operations in the correct sequence ... or skip reporting one or both. But won't be able to record completion of operation 30 before you've reported completion of operation 20, because WIP will say you have no available quantity at operation 30.
Regards,
Sabari

Similar Messages

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

Running steps and sequences at the same time

Hi,
I need to run some steps and sequence at the same time in my application due to test time restrictions. I am using Teststand 2.0. Colud you please describe me the methodology.

Hi,
Synchronization Step types came in at version 2 and there should be an example in the \teststand\examples folder.
Regards
Ray Farmer
Regards
Ray Farmer

Can I export my sidecar files to two or more hard drives at the same time from one computer?

Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?

Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that.

Process file after file / not all files at the same time

Hi There,
i have a new Problem with our XI Systems.
We process XML Files.. they come in a folder on the Server.. from there the Engine takes it and processes the message.
This works so:
In the folder /xyz/ comes a XML File... File1.xml
After 2 Minutes the XI System takes the messages and proccess it. The Engine then move the file to Folder /archive/
Another two minutes later a new file comes in to the Folder /xyz/ File2.xml
File2.xml change now data that comed with File1.xml
and two minutes later the Engine processes the message
and so on and on....
My problem is now.. when i put File1.xml and File2.xml in the Folder /xyz/ at the same time.. the Engine processes the Messages at the same time.. and inconsistencys comes into my system.
So what i want is:
I Put File1.xml and File2.xml into the same folder.. then the Engine comes and Process first File1.xml and when this finished the System proccesses File2.xml
Do you know what i mean?
Eventually someone has a solution for my question?
Thanks
Bjoern

OK. I found now in the INtegration Builder the Point as you can see in the Screenhot here:
http://img253.imageshack.us/my.php?image=58047457ux6.jpg
But my Problem is that i dont know exactly which queue i have to take..
In SXMB_ADM i found the following queues:
http://img253.imageshack.us/my.php?image=57846606uq4.jpg
And in the SXMB_MONI i see the following for messages:
http://img111.imageshack.us/my.php?image=47303569tg7.jpg
From the screenshots above, can you tell me which queue i have to take?
Or did i have to take the Queue that comes automatically when i choose EOIO?!
Thanks
Bjoern
Edited by: bjoern bayerschmidt on Dec 18, 2008 2:17 PM

Is it possible to be connected with a 3G modem for internet access and a WiFi router for printer sharing at the same time?

For our only internet access we have a 3G wireless modem. I have since purchased a WiFi printer and router to connect all the comptuters to in the house. The PCs have no problem with using both the 3G connection and the WiFi signal at the same time to print, however, the MacBook Pro will not connect to the 3G network and the router, it will drop the internet access from the modem and attempt to connect via WiFi (which has no internet access). Is there a solution that is available to remedy this? I attempted to create an adhoc printer network, however, the macbooks again will not print off of this, only the PCs. And I'm getting a bit frustrated overall with this.

The 3G wireless modem is on one of the PC's correct?
Why don't you pass the Internet through the Ethernet port to the router via Cat5 cable, then have that transmit a Wifi signal that everything else can use, then connect the printer to the router for print sharing?
You would have to turn off the wifi on the comptuer with the 3G modem as it's physically connected to the router and can't connect to the other machines as they are all connected to the router for sharing.
The Mac has the ability to pass, Internet Sharing in the System Preferences.
Do you have software for the Mac to run the 3G modem?

Streaming two or more flv videos at the same time

Hi,
I am working on a site that is intended to stream two or more flv simultaneously. The slightly different header clip should renew on entry to each page.
When I publish the fla file it plays as intended. When I upload the swf file to the web only one of the videos are playing back.
It does not matter if I import the video to a timeline, or stream it progressively from the server. Both clips are uploaded.
I am using CS3 and AS3.
http://www.doctorhoover.com/marcia/test7.html
Anyone??
ggaarde

Hi!!! hey dogHouseJim!! Could you please post a sample of your fourMovies.swf code to know how you do it?? It would be necessary for me to know how to do it. I'm working in an application that has got two flvPlayback components working at the same time but the main video pauses too many times because the other one is running too. Please help me!!! I post here my code (The main flv is croma_01intro ---> it doesn't work too far, I'm a beginner.. ) Thanks in advance for your help!!!!
---CODE---
import com.hagane.MHU.Timer;
var timeKeeper : Timer = new Timer();
video_tmp="flvs/croma_01intro.flv";
video_tmp2="flvs/presentacion720.flv";
var conexion2:NetConnection = new NetConnection();
var conexion:NetConnection = new NetConnection();
conexion2.connect(null);
conexion.connect(null);
var stream2:NetStream = new NetStream(conexion2);
var stream:NetStream = new NetStream(conexion);
mi_video2.attachVideo(stream2);
mi_video.attachVideo(stream);
stream.play(video_tmp);
//aseguramos 10 seg de reproduccion
stream.setBufferTime(4);
loadMovie("cargas.swf",cargas);
var n_veces = 0;
var prueba = 0;
this.onEnterFrame = function() {
//obtengo el porcentaje
var valor1:Number = Math.round(stream.bytesLoaded/stream.bytesTotal*100);
conexion1 = new LocalConnection();
conexion1.send("conectar", "estado_carga", valor1);
delete conexion1;
prueba = stream.time;
if ((valor1>=12)&&(prueba>=2)) {
delete this.onEnterFrame;
stream2.play(video_tmp2);
stream2.setBufferTime(15);
stream2.pause();
var intervalID_mc : Number = timeKeeper.intervalCall(2000, 0, lanzaEstadisticos);
n_veces = n_veces+1;
//funcion para saber que el flv termino
stream.onStatus = function(infoObject) {
    if (infoObject.code == "NetStream.Play.Stop") {
       //trace("video terminado");
    gotoAndPlay(25);
//if((infoObject.code=="NetStream.Play.Start")&&(n_veces==0)){
//stream2.play(video_tmp2);
//stream2.setBufferTime(4);
//stream2.pause();
//var intervalID_mc : Number = timeKeeper.intervalCall(5000, 0, lanzaEstadisticos);
//n_veces = n_veces+1;
function lanzaEstadisticos(Void):Void {
stream2.play(video_tmp2);
timeKeeper.clearIntervalCall(intervalID_mc);
stop();

How can I open two tabs and see two windows side by side at the same time?

The instruction I found on the web about using | between web addresses did not work. I have a Mac. Thanks.

The | character is typically used when creating multiple home pages. If you want two tabs displayed at the same time, you can try the [https://addons.mozilla.org/en-US/firefox/addon/4287/ Fox Splitter] add-on.

One SIMPLE, SIMPLE question that the answer seem to be no whre IN PLAIN ENGLISH! What do you have to do to have two of more tabs open at the same time. Just like ANY OTHER BROWSER LETS YOU DO! Ya know....so you can drag and drop things like pics etc.

For Pete's sake. This is not rocket sience. What more details do you want. I want two tabs OPEN at the same time so I can copy from one to the other or drag and drop from one to the other.

You can copy text and hover that selected text with the left mouse button down on another tab on the tab bar until that tab opens and drop the text in a text field in that tab. You need to make sure that that text area is visible because you can't scroll the page. You can also tear off that tab (temporarily) to a new window and resize them to see both windows. Move the tab back to the other window once you are done if you prefer that.

Any way to have two DVD SP projects open at the same time?

Hi
Since it is likely that I'm going to re-build all the menues in my PAL DVD in a new NTSC project, I'd like to know if there is any way for me to have two separate DVD Studio Pro projects open at the same time. That way I can easily check and copy location coordinates for the buttons, copy text, etc, etc.
When I open my new project when the old still open, DVD SP just closes the old and opens the new project.
If it was possible, it would make everything much easier for me, since I have 15 menues to re-create
Thanks!
Natasha
Mac OS X (10.4.9)

If you just require a visual reference, you can take screen grabs of your first project and open them in Preview...
Open your project, and press Shiftcommand(apple)4 and the pointer turns into a little cross-hair.... you then click-hold & drag a marquee around the section of the screen you need as reference, then when you release the mouse button a screen grab is taken of that portion you selected.
It will be saved to your desktop as 'Picture 1'
you can repeat this for different sections of the project (picture 2, picture 3 etc), and open them in preview.
Not an ideal solution, but might be of help.

Whether two session with for update at the same time will wait for another?

Will this scenario happen?
One session executes: select ... for update/select ... for update nowait
The other session also executes: select ... for update/select ... for update nowait
Two sessions happens at the same time unluckily. Whether they will all stand by because of "for update" or quit immediately because of "nowait"?
Thx a lot.

HiddenName wrote:
This situation is called 'a deadlock'. Oracle will automaticaly detect a deadlock. One of the statements will fail with ORA-00060 deadlock detected;
No, it's not.
A deadlock is when sesson-A has a lock on something that session-B needs in order to continue, and at the same time, session-B has a lock on something that Session-A needs in order to continue. They BOTH have something the other needs.
In the OP's case, at least as he described it, it is simple serialization. The one with the lower scn will go, then the next.
PS.
Why don't you try? You can setup a small table with some records, open 2 sessions to the same database and for example issue UPDATE statements:
session 1: update where id=1
session 2: update where id=2
session 1: update where id=2 - this will hang waiting for session 2 to commit and free lock
session 2: update where id=1 - ORA-00060
You may also read about deadlocks in chapter on "Data Concurency and Consistency" of "Oracle Concepts'.

Two or more people editing at the same time

Dear All,
I am planning to purchase FCP Server, and I am just in a very beginning of consideration.
Immediately, I am wondering if FCP Server can let two or more people editing on the same project at the same time.
I know it has Check-in function, and it seems to me that it just takes the project to another computer to do editing. What if another person wants to do editing on the same project?
Also, if it allows us many people to do editing on the same project, can we save the project at the same time on the same computer installed FCP Server?
Please advise.
Many thanks in advance.
King

In Final Cut Server (FCSvr) checking out a Final Cut Pro project (FCProj) creates a copy of the project file at a location you specify saving it to on your local computer. When you check out a FCProj, the project asset is locked and cannot be modified by other users. Additionally, every media asset that is used in the project is locked from being modified by other users.
However in a you're trying to have multiple users work on and edit the same project, I'd suggest start by duplicating the FCProj asset within FCSvr. Maybe start with a master capture / digitize project that contains all the media needed to work on by both editor. This will allow for multiple editors to have access to the same project media assets. In any scenario where multiple editors are collaborating, I'd suggest have them also work on separate project file and maybe split / divi up the work, based on scene, act etc.
Sequences can be easily merge between project later.
Hope this helps.
Nicholas Stokes
XPlatform Consulting
< Edited by Host >

Two clips overlayed and playing at the same time..

Hello!
Is there anyway to play two clips at the same time?
The same way cross-disolve layers the images??
a thousand thanks!!

Hi (again)
I figured it out.. So if anyone is interested, all you have to do is go to Modify and then change the composite mode to Overlay. Then it has to be rendered. Piece of cake!!
Thanks!

Its is possible to use two embedded instances of OC4J at the same time?

Hi,
I need to run two web apps at the same time in JDeveloper. Each on must run in its own OC4J instance, in different ports. I don't want to run a remote OC4J instance, I want two embedded instances and JDeveloper 10g comes just with one.
Wny ideas?
Thanks in advance,
Brian

Brian,
no, there is only one embedded OC4J instance possible. The option is to install OC4J stand alone locally.
Frank

Processing of two routing steps in BOM at the same time .

Similar Messages

Maybe you are looking for