Processing or hanged?.....
how come we know that a particular data load which shows in yellow.... whether it is in processing or hanged?.....
You are asking the same question again with a change in subject.
Answer still remains same.
Follow the RSMO Details.
Click on the Monitor next to the Yellow Status - In Manage
Similar Messages
-
I'm executing a process flow with several activities.
After each activity I check for status and error out if the activity fails. If the activity succeeds I go on to the next activity.
When I execute a map within the process flow, the process flow executes successfully only if the map is the last activity. The map functions to output data to a file.
The Process Flow hangs if after the execution of the map
a stored procedure is called. The stored procedure dynamically creates a DBLINK and updates a table.
When I cancel the execution of the process flow I see the map has successfully outputted all
records. But why hasn't it gotten to the stored procedure.
Each activity on its own works fine but in combination with each other they hang the process flow.Mahesh,
I am assuming that RAB stands for Runtime Audit Browser.
The Runtime Audit Browser tells me how many records were
rejected but not which ones and why.
The debugger does not give adequate information in fact it does not issue a "break" where it should.
Are there any tools OWB provides for "catching", or
auditting data that cannot for whatever reason be extracted to a file.
I see that they have a mechanism for capturing problems with data coming from a file into a table. I don't see
where there is an explanation of error handling going from a table into a file.
Thanks!
Marion -
Process flow hangs when mapping execution fails
Hi,
Has anyone faced the 'process flow hanging' problem after upgrading to OWB 9.2.0.4? Don't know why this is happening again after the upgrade. The audit browser clearly indicates one of the mappings has failed and workflow tables indicate there was a notification upon failure. The process flow runs several sub process flows each containing 5-6 mappings.
Also, the mapping that failed (due to unique key violations on the target table) executed the post mapping stored procedure although the post mapping run condition was set to 'ON SUCCESS'. Is this the expected behaviour for the post mapping operator when there are database related failures?
Our environment is OWB 9.2.0.4 on AIX 5.2.
Database version is 9.2.0.5. We recently upgraded the database from 9.2.0.4 to 9.2.0.5 and OWB from 9.2.0.2.8 to 9.2.0.4. Process flows are executed using sqlplus.
Thanks,
ChethanHi,
I would expect you to have less issues with 9204 as there were some fixes applied. So I have not seen this before.
To get into the mapping a little bit more, is this a row based mapping that is under the tresshold? In any case, if you specify "on success" I would expect it to only work on success... A database related error will also cause it to get an error, so this is interesting as well.
Does the error repeat at any case if there is a failure?
Jean-Pierre -
Process chain hangs due to locks in SM12
We are currently experiencing issues when executing the process chains. The process chain hangs at one or more DTP loads without executing the following step even though the DTP load is successfully complete (Green). Upon research found that the system locks in SM12 are not released for these DTP loads which is causing the process chain to hang.
Once I delete the lock manually, the process chain continues with the subsequent steps. This is painful during night time loads and hence am wondering if you guyz are aware of a fix for this problem.
FYI, we our system is BI 7.0 and SP 13. Any leads towards the solution are highly appreciated. Thanks!hi Chetan,
Please enlight me, with your suggestion here you are asking to increase the BGD processes for that particular process chain or for system (SID) as whole?
Please help to understand better.
Thanks in advance
Regards
Sekhar -
Process flow hangs in state "bussy"
Hi,
We are encountering what seems to be a "random" problem when runing process flows. In about 1 out of 4 runs the flow "hangs" with status "busy"
The technical specs are as follows:
OWB 9.2.0.2.8 on WIN2K Server SP4.
There are two runtime repositories on two different WIN2K database servers (Oracle 9.2.0.4 EE)
The symptoms are as follows:
- We have more than 10 process flows containing from 15 to 60 processes. The problem is not related any single process flow, and occurs on both our target servers.
- The process flows runs OK in approximately 3 out of four runs.
- When the process flows "hangs", one or more of the processes in the process flow also hangs in the "busy" state. The hanging process can be a mapping or an external process
- The processes that have status "busy" have actually finished. They have a completion time set, and in the case where the process sends mail, the mail has been received. In the case of mappings I have verified that the mapping has completed, and that the session performing mapping has terminated.
- When the problem occurs, there is always the same "lock" pattern displaying in OEM:
Username Session IdLockMode HelMode Requ Object Name ROWID Object OwnObject T Resource ID1 Resource ID2
OWBRT92 17TM ROW SHARNONE WB_RT_SERVICE_QUEUE_TAB OWBRT92 TABLE 61161 0
OWBRT92 17UL EXCLUSIVNONE 1073741824 0
OWBRT92 48TM ROW SHARNONE WB_RT_NOTIFY_QUEUE_TAB OWBRT92 TABLE 61145 0
OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFICATION_COMPONENTS OWBRT92 TABLE 61137 0
OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFY_QUEUE_TAB OWBRT92 TABLE 61145 0
OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFICATION_ACKS OWBRT92 TABLE 61141 0
OWBRT92 67TM ROW SHARNONE WB_RT_NOTIFICATION_STREAMS OWBRT92 TABLE 61135 0
OWBRT92 67TM ROW EXCLNONE WB_RT_AUDIT_EXECUTIONS OWBRT92 TABLE 61199 0
OWBRT92 67TX EXCLUSIVNONE 262151 87564
Session 17 is the runtime service, and these two locks are present under normal operation. Session 48 is the Sqlplus session runing the execution template, and session 67 is (i think) the session that is causing the problem.
- The advanced queue WB_RT_NOTIFY_QUEUE tab shows "Number in state ready" equal to the number of processes still in the state "busy" i the process flow.
- When the runtime service is stoped (using the stop_service.sql) The locking sessions disappears.
- When the service is restarted, the processes change status to "bussy recovery" There is now a RPE-01008 and a RPE-01009 message in the "errors" section for the mapping.
- After the failed recovery, everything looks normal, except that there are now twice the number of messages in state READY on the WB_RT_NOTIFICATION_QUEUE. The only way I have found to get rid of these is to delete them from the queue table.
Is this a known problem? We are about to go live in a few weeks, and this could be a serious show stopper if we can't rely on the daily process flows to run as expected.
I could log a TAR on this, but I suspect support would ask for a test case, and Im going to have a hard time providing it for them in this case.Jean-Pierre,
Thanks for the update. I was afraid this was going to be one of those "hard to pinpoint" issues...
When the problems occurs the Worflow Monitor always shows the task status as "Notified".
The "Main routine" is no longer executing. The session that was executing the mapping has disconnected, and the mapping has completed successfully. (I have verified this by checking the rows in the target tables). Also, the problem is not restricted to mappings. Sometimes it happens to "mail notifications", and in these cases the mail message is received as expected.
It looks to me like there is some kind of synchronization problem between AQ and the controlling process (the runtime access user session) that can arise under a given condition (which I unfortunately have not been able to determine what is). As far as I can tell, the process executing the mapping completes and puts the message that it has completed on the Notify_Queue (hence the messages in stat "Ready" on the queue), but for some reason the process waiting to read the message fails to do so.
As for a test case, I have recently sent an export of our design repository to Igor Machin. Is it possible for you to have a look at that? As I mentioned in the first post, our Process Flows are fairly complex. Some of the flows are executing 50+ mappings in parallel. -
BPEL Processes are Hanging.......
Hi,
I am using BPEL 10.1.2.0.2 version. The logic am implementing in BPEL process is a frontend application will invoke BPEL process.BPEL will take some inputs from frontend and invokes a procedure in database using DbAdapter.BPEL will pull the output of the procedure and will pass the same to Frontend.
The logic being implemented in procedures is select and update depends on the requirement.
We completed our development and moved to UAT and everything is running fine.From past one week we are facing a problem that BPEL processes are hanging when they are invoked both from BPEL console and Frontend. The process neither displaying any output nor throwing any exception.
After bouncing the BPEL servers everything is coming to normal.I didn't found any error log in both domain.log and OraBPEL~OC4j_BPEL~default_island.log files.
Our BPEL Environment has 2 BPEL Mid Tiers connected via a loadbalancer
whether it could be related to cache size or datasource connections ????
Please suggest what could be the problem...........
Thanks
ChandraCheck the timeouts on the firewalls. Also look at Dead Connection Detection (DCD) on the database server. You will need to turn on your DCD to keep your JDBC connections alive.
Pete -
Downloading the latest upgrades for Mac 10.8.2 keeps stalling. I still have Firefox 17.0.1. the system has tried many times but the process just hangs.
Try to create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Process chain hangs when reaching AND process before Attribute Change Run
Hi Experts,
I have the following problem. For some reason my master data attribute process chain hangs when it reaches the AND process variant right before the Attribute Change Run. It does not go anywhere from that point.
Thank youhi AG,
if this is hanging daily at the same place without proceeding further, and with out giving the instance for the same. then the better way is to replace that AND process in the chain with the new AND process. and then check and activate ur chain. this wil solve ur problem.
if this is the first time that happend to u, then check the previous load status, if any of the load has failed and u didnt turned the status of the process then also this can happen. So please do check it and act accordingly. If u cannt find the resolution then please run ur changerun manually.
u can use RSPC_PRCESS_FINISH FM to convert the status of any process. for this u need to give instance and variant details. and then if u execute, then chain will continue further.
Hope this will help you.
thanks
Vishnu -
Dear All,
We have ECC6 on OS Win 2003 32 bit with oracle 10.2.0.2.0
Recently we faced issue like all dialog process getting hang .DEV_W0 log is as
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Sep 30 10:47:25 2010
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\TCP\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\TCP\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\TCP\SYS\exe\run\dboraslib.dll' is "700.08", patchlevel (0.201)
B New connection 0 created
M sysno 00
M sid TCP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 292856
M
M kernel runs with dp version 242(ext=110) (@(#) DPLIB-INT-VERSION-242)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 292856) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 48216 (1176)
M DpShMCreate: sizeof(tm_adm) 3786880 (18840)
M DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1296)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05410040, size: 4451296)
M DpShMCreate: allocated sys_adm at 05410040
M DpShMCreate: allocated wp_adm at 05411BF8
M DpShMCreate: allocated tm_adm_list at 0541D850
M DpShMCreate: allocated tm_adm at 0541D880
M DpShMCreate: allocated wp_ca_adm at 057BA100
M DpShMCreate: allocated appc_ca_adm at 057BE780
M DpShMCreate: allocated comm_adm at 057BFEF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05840DA0
M DpShMCreate: allocated gw_adm at 05840DE0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05840E10
M DpShMCreate: allocated wall_adm at 05840E18
M rdisp/queue_size_check_value : -> off
Y *** ERROR => sapinit: no memory or improper size for ztta/short_area <= 0(-3) [sapinit.c 1107]
M *** ERROR => DpMemInit: sapinit (-3) [dpxxdisp.c 10155]
M *** DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
Please suggest what going wrong with the system.
Regards
AbhijitHello,
ECC6 not really recommended on 32 bit Windows
Make sure you have /3Gb and /pae switches enabled in boot.ini file on c drive.
- Please reduce parameters rdisp/ROLL_SHM,
rdisp/PG_SHM, to 6000 and parameter abap/buffersize to 350000 to get
more memory available to run the programme/transaction.
regards,
John Feely -
Error while executing a process - it hangs!
Hi there, please help me with this problem:
I'm executing a CMD file with the next code and it hangs
File file = new file("E:\\NDM_TEST\\UPLOAD_ENC\\CA210105.001.zip")
Vector response = null;
Log.debugLog("File to transport as a response " + getFileAbsolutePath());
if (NDM.executeCMD(file.getFileAbsolutePath(), file.getFileName()) == 0) {
public static int executeCMD(String fileAbsolutePath, String fileName) {
int exitValue = 1;
String chainn = "";
try {
Log.debugLog("starting CMD execution");
String arguments[] = new String[1];
arguments[0] = "\"" + getNDM_BATCH() + "\" " + fileAbsolutePath + " " + fileName;
exitValue = WindowsExec.execute(arguments);
} catch (Exception e) {
Log.log("[ERROR] NDM.ejecutaBatch ==> " + e);
} finally {
return exitValue;
public class WindowsExec {
public static int execute(String args[]) {
int exitVal = 1;
if(args.length < 1) {
Log.log("USAGE; java WindowsExec <cmd>");
System.exit(1);
try {
String osName = System.getProperty("os.name");
String[] cmd = new String[3];
Runtime rt = Runtime.getRuntime();
String toExecute = cmd[0] + " " + cmd[1] + " " + cmd[2];
Log.debugLog(toExecute);
Process proc = rt.exec(toExecute);
Streammer errorStreammer = new Streammer(proc.getErrorStream(), "ERROR");
Streammer outPutStreammer = new Streammer(proc.getInputStream(), "OUTPUT");
errorStreammer.start();
outPutStreammer.start();
exitVal = proc.waitFor();
} catch(Throwable t) {
t.printStackTrace();
} finally {
return exitVal;
public class Streammer extends Thread {
InputStream is;
String type;
Streammer(InputStream is, String type) {
this.is = is;
this.type = type;
public void run() {
try {
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr);
String line = null;
while ((line = br.readLine()) != null) {
Log.log(type + " > " + line);
} catch (Exception ioe) {
ioe.printStackTrace();
}The output of the line Log.debugLog(toExecute); is:
cmd.exe /C "E:\NDM_TEST\PROCESS\TX_TEST.CMD" E:\NDM_TEST\UPLOAD_ENC\CA210105.001.zip CA210105.001.zip
If i run this output from a command prompt it runs ok, but when invoked from my java program it hangs and never endsYou are right, at the moment I paste my code, I delete three important lines, here is the right code:
File file = new file("E:\\NDM_TEST\\UPLOAD_ENC\\CA210105.001.zip")
Vector response = null;
Log.debugLog("File to transport as a response " + getFileAbsolutePath());
if (NDM.executeCMD(file.getFileAbsolutePath(), file.getFileName()) == 0) {
public static int executeCMD(String fileAbsolutePath, String fileName) {
int exitValue = 1;
String chainn = "";
try {
Log.debugLog("starting CMD execution");
String arguments[] = new String[1];
arguments[0] = "\"" + getNDM_BATCH() + "\" " + fileAbsolutePath + " " + fileName;
exitValue = WindowsExec.execute(arguments);
} catch (Exception e) {
Log.log("[ERROR] NDM.ejecutaBatch ==> " + e);
} finally {
return exitValue;
public class WindowsExec {
public static int execute(String args[]) {
int exitVal = 1;
if(args.length < 1) {
Log.log("USAGE; java WindowsExec <cmd>");
System.exit(1);
try {
Runtime rt = Runtime.getRuntime();
String[] cmd = new String[3];
cmd[0] = "cmd.exe";
cmd[1] = "/C";
cmd[2] = args[0];
String toExecute = cmd[0] + " " + cmd[1] + " " + cmd[2];
Log.debugLog(toExecute);
Process proc = rt.exec(toExecute);
Streammer errorStreammer = new Streammer(proc.getErrorStream(), "ERROR");
Streammer outPutStreammer = new Streammer(proc.getInputStream(), "OUTPUT");
errorStreammer.start();
outPutStreammer.start();
exitVal = proc.waitFor();
} catch(Throwable t) {
t.printStackTrace();
} finally {
return exitVal;
public class Streammer extends Thread {
InputStream is;
String type;
Streammer(InputStream is, String type) {
this.is = is;
this.type = type;
public void run() {
try {
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr);
String line = null;
while ((line = br.readLine()) != null) {
Log.log(type + " > " + line);
} catch (Exception ioe) {
ioe.printStackTrace();
}I hope you can help me know... thanks!. -
Process Chain hangs on AND process
Help Super gurus!
I've tried several versions of a chain that loads multiple InfoPackages serially then multiple DTP in parallel using filtering from the PSA to a DSO. All load successfully. Then I have the DTPs all meet at an 'AND' process before processing should continue to a cube.
The 'AND' process also shows green but it does not continue to the next process step. It just stops there, no more jobs running, no yellow, nothing. It thinks it's all done, everything after that is still blue.
Why does it hang there and what can I do to get it to continue?
Thanks,
Al
Points available.Hi,
Not sure what is the root cause in your case.
Try this. It may work. Normally this is done after a step turns red and no repeat is available.
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Thanks,
JituK -
Payment Process request hangs when process in more than 7000 invoices.
We are using oracle E-BIZ R12 version in our company.The problem we are facing while Payement process request program is when we are trying to process more than 8000 invoices the entire application hangs.No new logins are allowed till the entire process ends and it takes a lot of time to process. Kindly help me with this.
Thanks and regards..Are both the payments for the employee not transferred or only the unpaid one ?
How about paying both the amounts(status paid) and then do a transfer to SLA.
Cheers,
Vigneswar -
Somewhere along the line of the past few months I installed an update (from Apple?) that broke applescripts on my mac (10.5.8). As far as I can tell it's limited to scripts that determine if a process name is running. For scripts that I have written, ScriptEditor converts the "exists process" keywords to "exists «class prcs»" which is new to me. This script will hang until it times-out with "Apple event timeout". This is true for scripts that I have written as well as Microsoft software updater for office that runs an applescript (I've seen it in Activity Monitor) to determine what software is running and needs to be closed.
(Tom_X)
tell application "System Events" to set ffopen to exists process "Safari"
if ffopen then
say "Safari is active."
else
say "Safari is not active."
end if
Clicked Compile, after about a minute of a spinning pinwheel I get error: A """ can't go after this identifier.
And it highlights the first quotation before the first instance of "Safari"
I replaced all quotation marks and typed in my own to make sure I didn't carry over fonts into Script Editor- Same error without pinwheel.
(Andreas)
if exists process "Safari" then
say "Safari is running"
else
say "Safari is not running"
end
After clicking Compile I get error: Expected "then", etc. but found """.
Same thing...
It highlights the first quotation before the first instance of "Safari"
I replaced all quotation marks and typed in my own to make sure I didn't carry over fonts into Script Editor- Same error without pinwheel.
(Andreas)
tell application "System Events"
if exists process "Safari" then
say "Safari is running"
else
say "Safari is not running"
end if
end tell
Same result...
After clicking Compile I get error: Expected "then", etc. but found """.
It highlights the first quotation before the first instance of "Safari"
I replaced all quotation marks and typed in my own to make sure I didn't carry over fonts into Script Editor- Same error without pinwheel.
(Andreas)
tell application "Finder" to if exists process "Safari" then beep 2
Compiles
After clicking Run I get pinwheel for about a minute and then (regardless of whether Safari is running) I get error: Finder got an error: process "Safari" doesn't understand the exists message.
I replaced all quotation marks and typed in my own to make sure I didn't carry over fonts into Script Editor- Same error WITH pinwheel. -
Trying to Direct Link from PPRO 2014 to SG 2014. It's a C300 file. It's only maybe 20 seconds long. However, speedgrade hangs at Post-Processing.
GPU: Quadro 5000 + Tesla C2075
64GB RAM, Hex Core i7I was able to get it to work by disabling GPU DirectLink. Which with two GPU's I think my Maximus Configuration should work.
-
Process Flow hangs on wb_rt_notify_queue_tab
Hi,
We are encountering some problem on process flow.
Environment: Oracle 9.2.0.5, OWB 10g, workflow 2.6.2, HP-UX
The process flow has about 20 mappings. When it hangs, I can see the following:
1. In Workflow, the status of the mappings are "NODIFIED"
2. In wb_rt_notify_queue_tab, the DEQ_TIME shows null and the state is 0
3. In wb_rt_audit_executions, the return_result shows "OK" for this mapping, and elapse shows the seconds
it spent. and the data was loaded correctly.
4. There are some locks showing
SID 31 has locks on WB_RT_AUDIT_EXECUTIONS, WB_RT_NOTIFICATION_ACKS, WB_RT_NOTIFICATION_COMPONENTS, WB_RT_NOTIFICATION_STREAMS, WB_RT_NOTIFY_QUEQE_TAB, WB_RT_SERVICE_QUEQE_TAB.
SID 25 has locks on WB_RT_SERVICE_QUEQE_TAB
SID 97 has locks on WB_RT_NOTIFY_QUEQE_TAB, this is the SQLPLUS session invoking the Process Flow
I saw some messages on the similar topic in this forum, but I guess that's for early version of OWB.
Any suggestion will be appreciated
Thanks in advance.I am also having same problem and my environment is
Environment: Oracle 9.2.0.3, OWB 10g, workflow 2.6.2, sun solaris 2.8 - 64 bits. Does installing/upgrading OWF 2.6.2 to 2.6.3 solve the problem and does it have any ripple effect on the system if you upgrade the OWF from 2.6.2 to 2.6.3? Please help.....
Maybe you are looking for
-
Get All Element Values in Assign Activity
Given the below XML, how can I get both values with a single statement? I tried /root/set/name/. with no luck. I would like to assign John Jane to a variable in a BPEL Assign Activity. <root> <set> <name>John</name> </set> <set>
-
How can I read my incoming emails in one folder?Like I do in Live mail and Outlook express.
Now we can only read emails in different folders if I am managing multiple email accounts. It does not feel so comfortable as we use Live mail and Outlook express.
-
Service Bus 12c Class not found 'oracle.tip.pc.services.functions.ExtFunc'
Hi, Did anyone came across this issue with Class not being found for XSLT Function used in transformer on 12c OSB. I'm using oraext:sequence-next-val and have configured as below: namespace-uri:http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.s
-
Transfer of Shopping Cart (SRM) to Back End Syetem (R/3)
Hi experts, We have just upgraded to SRM 5.0 with SRM Server 5.5 (SP 0008). We have moved our EBP application from Requisite to CCM. In our old application we have created some customer fields in the shopping Cart and will be moving the data from the
-
Change Document - Insert new value / Delete
Hi, Jus need a quick clarification on change documents - 1. insert opertaion. I have created change documents and able to record the changes in CDPOS when changing or updating the existing values in table. But when i try to insert into the table the