Processing overdue error during delta extraction from datasource 0CO_OM_CCA

Hi,
I'm getting "Processing overdue error" in BW while extracting delta from datasource 0CO_OM_CCA_9. all other extraction jobs from R3 -> BW are successful. Even Delta init on this datasource is successful & problem is only with delta package.
I appreciate if someone could provide information based on the following error details on this issue.
here are the extraction steps we followed.
Full load of fiscal years 2006 & 2007 Into transactional cube.
load budget data into transactional cube.
compression of the cube with "0 elimination"
Delta Initialization with fiscal period selections 1/2008 to 12/9999
all the above steps were successful.
and when delta package is scheduled, we are getting following errors.
BW system log
BW Monitoring job is turning red with following message.
Technical : Processing is overdue
Processing Step : Call to BW
Sending packages from OLTP to BW lead to errors
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in
the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely
connected to the SAP BW. Check especially the authorizations of the
background user in the source system.
R3 Job Log
Even after BW job turns to red, R3 job continues to run for 2 hours and
eventually gets cancelled with an ABAP dump & here is the log.
Job
started
Step 001 started (program SBIE0001, variant &0000000110473, user ID
BWREMOTE) DATASOURCE = 0CO_OM_CCA_9
Current Values for Selected Profile Parameters
abap/heap_area_nondia.........2000000000 *
abap/heap_area_total..........2000000000 *
abap/heaplimit................20000000 *
zcsa/installed_languages......EDJIM13 *
zcsa/system_language..........E *
ztta/max_memreq_MB...........2047 *
ztta/roll_area................6500000 *
ztta/roll_extension...........2000000000 *
ABAP/4 processor: SYSTEM_CANCELED
Job cancelled
Thanks,
Hari Immadi
http://immadi.com
SEM BW Analyst

Hi Hari,
We were recently having similar problems with the delta for CCA_9. And activating index 4 on COEP resolved our issues.
Yes, by default there is a 2 hour safety interval for the CCA_9 DataSource. You could run this extractor hourly but at the time of extraction you will only be pulling postings through 2 hours prior to extraction time. This can be changed for testing purposes but SAP strongly discourages changing this interval in a production environment. SAP does provide an alternative described in OSS note 553561. You may check out this note to see if it would work for your scenario.
Regards,
Todd

Similar Messages

Date of last extraction from DataSource 0HR_PY_PP_2 is not available

Hello all,
We are using this data source to extract data for HR in BW. We are currently on BI 7.0
When I used this datasource in BW development system it worked fine. But now I am trying to extract data using the same datasource in BW QA system and I am getting this error.
"Date of last extraction from DataSource 0HR_PY_PP_2 is not available HR_BIW_PP"
The datasource is delta supported so I am trying to init it, and thats when I am getting this error.
Has anyone seen this message before, can some give some suggestions?
Thanks in advance

Just quick check, check rsa3 if you can get any data and also it seems like it is complaining about changes in extract structure, can you compare the extract structure of the two system manually? If you have made changes to the extract structure, did you move that change in the source system? Sometimes it worth it to replicate the datasource and reactivate the transfer structure using program RSActiTran.
thanks.
Wond

Process overdue error asynchronus transmission of info idoc 2 error

Hi
For an r/3 job i am getting the below message and it is not progressing from last 2 days and failing in BW with Process overdue error. Can somebody advise me on this.
data soucrce :0CO_OM_OPA_6
The job stucked for last 10 hrs and showing 0 records in BW.
Thanks
Subbu

Hi,
What are you trying to do...
are you performing any loads from the above said DataSource from R/3 to BW or
are you replicating the DataSource from your source system to BW side...
in any of the above cases..please check whether you have connected well to your source system from your BW system...
for this right click on source system in source system section of RSA1..and check..if everything is fine...then it should take such long time to complete your activity.
if not check in Tcode:SM59 to make sure the connectivity..which your problem can be solved sucessfully...
hope this is clear for you...
Regards
Ramsunder

Process overdue error

Hi all,
How to reslove the process overdue error and TRFC errors.Plz tell me
Rgds
Bharath

HI
Follow these threads
Process Overdue error
error: process overdue
Process is overdue (during dataload)
error like process ovedue in extraction data
Khaja

You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE

Hi,
Iam facing the problem As
You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
ERROR IN SUBSTEP
ERROR IN SUBSTEP
Error reading the data of InfoProvider ZDP_VIRT..
I had created a Virtual Infoprovider. and taking the Dat source ZZ_TD_EBAN.
done the Trasf and DTP. for data source to cube. which was bulit in BI7..
i can see the flow AS Source system- datasource- virtual provider.
for virtual provider at run time it picks the data from source.
But when i rum the query on this VP iam getting error as
You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE
even if i chek data at virtual provider level byclicking display Data..
after selecting the fields once i execute . there aso iam facing the same error. as
You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
Once i get in tthe error.. i can see the below msg.. but even though not able to solve .. i need your assistence.
You are not authorized to extract from DataSource ZZ_TD_EBAN in application component: MM .
System Response
The authorization check was performed with the following field values:
DataSource: ZZ_TD_EBAN
Application component: MM
Subobject: DATA
Activity: 03
Procedure
To be able to extract from the DataSource, you need authorization for authorization object S_RO_OSOA (authorizations SAPI-DataSource) with the field values specified above.
Procedure for System Administration
There is a role template S_RO_OSOA_TMPL (DataSource (OSOA) Display/Maintain/Extract) available that contains the authorizations to display, change and extract all DataSources.
Pls help mewith your valuable answer.

Hi ,
As given in your error message that S_RO_OSOA authorization object is missing . You need to include this auth object in the ID from which you are extracting the data using the TCODE : PFCG . You can ask the basis person to do so for you .
When you run any report on a virtual infoprovider , you need to give the authorization of the DTP & the transformations apart from your cube and datasource in PFCG so that it can display the output in the report . This setting is only necessary for virtual cubes.
You can always check the missing authorizations in tcode : SU53 .
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Date of last extraction from DataSource 0HR_PP_REC_52 is not available

Hi ,
Iam getting another error for data source 0HR_PP_REC_52 , it follows:
Date of last extraction from DataSource 0HR_PP_REC_52 is not available HR_BIW_PP 1
Please help as iam not aware of this type of extrcator.
Thanks in advance.

Hi,
Did you delete the request under scheduler menu of your infopackage?
Scheduler->Init options from the Source system->delete the request
run Init with transfer option now. If it doesn;t help, simply replicate the datasources once and try initializing.
Regards,
Suman

How to see deleted records in delta extraction from view

Hi folks,
i am currently reflecting about delta extraction from a view:
The view contains a date field (change date) which is used to identify new or changed records.
So the delta extraction of new and changed records works without problems.
But what is happening with records that are deleted in the source system?
My current understanding is that deleted records will not be shown in the view. Therefore the deletion is not visible in the extraction.
- Is there a workaround for this problem?
- How is deletion of records normaly handled in generic extractors?
- Is it impossible to extract a deletion when using views?
any suggestions and help will be appretiated...
bye

Hello Florian,
Generally records will not be deleted (until if you physically delete it from table) but will have a status deleted.
So it doesn't matter whether you use view or tables the deleted records will be extracted through the view to update the BW data targets.
Thanks
Chandran

"Errors occurred during the extraction" - COPA datasource using Tcode KEB0

Dear Experts,
I have created a COPA datasource using Transaction code KEB0 .In Operating Concern i gave company code value and i have chosen Account Based radio button and i have created a datasource name like "1_CO_PA_TEST"
i had given the datasource in RSA3.this datasource has a mandatory inputs of Controlling Area & Period/year .i had given the two inputs and tried executing the datasource.i got the error message "Errors occurred during the extraction" "Message no. RJ012"...
Can anyone solve my problem??????????
Thanks in Advance.
Regards,
SVB

Hi,
Can you check whether the Update mode in RSA3 is Full or Delta. If its delta, you would have to give the value of your BI system in Target system field. If you dont give this value, it would give the error that you received.

Error in delta extraction with SAP DataSource 2LIS_11_VAHDR ...

Hi all
I used the old data load process(3.5) in 2004s system.
There are errors in detla extraction with SAP data source
2LIS_11_VAHDR
2LIS_11_VAITM
2LIS_12_VCHDR
2LIS_12_VCITM
The delta data(before/after image) aren't right.
Has anyone experices with this problem?
thanks in advance

No Problems yet,explain the error message with error number in details here for some one to help you.
Hope it Helps
Chetan
@CP..

Errors occurred during the extraction - Generic datasource

Hi,
We had created a Generic datasource based on Infoset. While executing RSA3 for that datasource, 'Errors occurred during the extraction' message is getting displayed.
In the Error log, it says, "Field catalog does not agree with the fields of the functional area".
Please let us know on how to resolve this error asap.
Thanks in advance!!!!

hi haripriya,
just go to RSO2.
Enter the name of your datsource.
then Click on Delete.
Then Again Recreate your data source with correct structure and definition.
then activate it and replicate it in BW.
hope this will help u.
thanks

Missing PCA document in BW during delta extraction of 0EC_PCA_3

Hi experts,
We are using Oracle 10g Data base for our ECC6.0 R/3 system.During BW extraction some of the PCA line item records got missed which gets update in data base table GLPCA in R/3 after successful document creation.
We are in the process of analysis to find out the root cause of the issue as we are approaching year end close.
Please let me know how to get the following logs(Information) in R/3
1.Total time taken in Application server for a particular document which was Entered.
2.Total time taken for a document from posting(Document entry) to successful data base server update.
(OR Application server to Data base server update log details OR Document posting to DB write for a document)
Please treat this as a matter of urgency
Regards
Kumar

I thought payment run is only for AP and AR documents.Is Payment run applicable for PCA journal also?
true the AP and AR postings will come in the PRC4 load in 0EC_PC_1.
But the other side of the AP and the AR is bank which is posted directly to 0EC_PCA_3.
Go to the AP posting for the payment - then document overview and you will see the balance sheetposting for the bank
In th emenu accoutning documents somewhere is the link to the PCA document - you can check there
The sm13 errors naturalyl wont excist as they have been processed
This is goign to be a nightmare to try and prove - I gave up trying to do this when I lost some data once
Yes GLPCA is the line item table that 0EC_PCA_3 reads
0EC_PCA_1 in full mode reads GLPCT but 0EC_PCA_1 in delta mode - actually creates a proper RSA7 delta queue for GLPCA but summarises into a GLPCT structure(!!! yeah I know!)
My only requirement is GLPCT data - I currently run this every hour based on the delta queue and also I have a real time read for up to the second reads for importatn queries

Error while loading data from DataSource to InfoCube/DSO through DTP

Hi Friends,
I am trying to load data from DataSource to InfoCube/DSO through DTP and getting the following error:
Exception in substep: Extraction completed
Processing terminated
Data package 1 / 30.04.2009 22:38:30 / Status 'Processed with Errors'
When i see the detail message it says:
Syntax error in routine "convert_to_applstru", line 25 of generated program"
I checked all my transformation and looks ok. I was able to load data earlier and i getting this error all of sudden. Does some one know what is this routine "convert_to_applstru" ?
Thanks,
Amit

Hi Arun,
Where do i see this generated program in RSRV. I dont see this in RSRV. Please guide me.
Thanks,
Amit

How to debug mapping function module during delta extraction?

Hi experts,
Somehow our delta is not working properly, and i would like to debug our mapping function module. How can i debug it during a delta extraction?
Some info:
Our source system is CRM and our extractor is extracting one order document (contracts in this case). I know that when we modify a contract, a bdoc is generated and then passed throught the mapping function then the extracted data to the delta queue. I just need to debug when the bdoc is being mapped to see what's wrong with the extracted data.
Thanks in advance,
Van

Hi,
Since you are using a Function Module for the Extraction. Edit the Function Module and give "BREAK-POINT" before the loop command. Check and activate the Function Module.
Now Extract the datasource using RSA3. Now you can debug it. After checking remove the "BREAK-POINT" from the function module. Also Check and activate the same.
Regards
Jayaram M

Process for Flat file delta load from Application server to transactional??

I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
Can any one help with ABAP code and step by step process for this?
Thank you
Devi

Hi Devi,
As per your explaination, you want to load a list of files from application server using process chain.
You can do this with below steps.
1) Create a Event and call event to run Process chain multiple times.
2) Put all filenames in a file say, source-File
3) Write a rooting to read filename from Source-File and trigger InfoPackage
4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
Regards,
Ganesh

Process Chain error during info package execution

I'm trying to load master data into 0CURTYPE using process chain.
I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
On scheduling the process chain I get an error during the execution of the info package
"Could not find code page for receiving system
For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
Is it relatred to some setting whihc I have missed out?
Any help on this please?
Thanks,

Hi, this is a issue related to idocs in the source....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
this issue belongs to source...
They have to run a report:RBDAGAIN to process the errore idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
if this occurs regularly they have to change the settings in SM59..
refer exact note for this: 784381
rgds,

Processing overdue error during delta extraction from datasource 0CO_OM_CCA

Similar Messages

Maybe you are looking for