Processing overdue problem

Hi Friends,
I am doing daily loads , some body did some changes (don't know changes) all loads got failing and the error message is *" processing overdue" . I thought that changed in global settings, I changed the global settings waiting time is 1 day... but still loads are failing in RSMO (Monitor) , when i am doing refresing every load it get chaning status to yelow and successs.
Please help me on this , we have so many process chains unable to do this manully.
Who ever has given correct post will assigned points.
Advance Thanks,
Ramesh..

Process over due may occur due to lots of reasons mainly bcoz
Check whether any Idocs were hanged. Go to sm58 and selct those Idocs and process them manually. Check the RFC also.
unavailability of resources.check the availability of Background jobs
Check if there are any TRFCs or IDOCs got hung... check for the dumps in the ST22 tcode.
Check the Source system connectivity.
Try to reduce the package size and load the data once again.You can specify, the selection condition and create several InfoPackages to load all data. You also need to ensure that your datapacket size is optimal.
Check in table ROOSPRMS table and update the MAXSIZE, STATFRQU, MAXPROCS and MAXDPAKS values accordingly.
This table will help u to overwrite current system settings for data transfer process.
If there are any dumps in ST22, can you post the dumps.
Edited by: prashanthk on Aug 31, 2010 11:09 AM

Similar Messages

  • Processing overdue issue

    Hi All,
    we are facing an issue while loading data to PSA from R/3. There is huge amount of data getting extracted from R/3, But after some 20 datapackages are extracted the load gets fail and the error occured is Processing overdue. when we see in the source system we can see the extracting job to be in active state. Even when we tried reducing the variant size to a period level , we are facing this Process over due error.Can some one help in understanding this issue also suggest some solution for the same.
    Thanks,
    Archana

    Hi,
    there are lots of reason for this failure....
    processing overdue error occurs when there is huge volume of data need to be extracted to BW system.which will occupy all the system resource and which may lead to dead locks or may decrease the performance of other loads.
    You are getting the error as there is huge volume of data in ECC.
    its a good practice to Split the load using multiple selection.
    Check the source system job is active or finished?
    Check the iDocs or TRFCs got stuck from source.
    Check if there are any short dumps in source system and Bw system
    If the source system job is finisehd then check if there are any failed TRFCs from source, if any try to find that are related to this load and try to flush them manually (select the TID -->press F6).
    Also check the below thread
    processing overdue problem
    Contact BASIS person n ask them to check the system logs n temp table spaces and any thing unusual at the source system level.

  • Processing overdue error during delta extraction from datasource 0CO_OM_CCA

    Hi,
    I'm getting "Processing overdue error" in BW while extracting delta from datasource 0CO_OM_CCA_9. all other extraction jobs from R3 -> BW are successful. Even Delta init on this datasource is successful & problem is only with delta package.
    I appreciate if someone could provide information based on the following error details on this issue.
    here are the extraction steps we followed.
    Full load of fiscal years 2006 & 2007 Into transactional cube.
    load budget data into transactional cube.
    compression of the cube with "0 elimination"
    Delta Initialization with fiscal period selections 1/2008 to 12/9999
    all the above steps were successful.
    and when delta package is scheduled, we are getting following errors.
    BW system log
    BW Monitoring job is turning red with following message.
    Technical : Processing is overdue
    Processing Step : Call to BW
    Sending packages from OLTP to BW lead to errors
    Diagnosis
    No IDocs could be sent to the SAP BW using RFC.
    System response
    There are IDocs in the source system ALE outbox that did not arrive in
    the ALE inbox of the SAP BW.
    Further analysis:
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely
    connected to the SAP BW. Check especially the authorizations of the
    background user in the source system.
    R3 Job Log
    Even after BW job turns to red, R3 job continues to run for 2 hours and
    eventually gets cancelled with an ABAP dump & here is the log.
    Job
    started
    Step 001 started (program SBIE0001, variant &0000000110473, user ID
    BWREMOTE) DATASOURCE = 0CO_OM_CCA_9
    Current Values for Selected Profile Parameters
    abap/heap_area_nondia.........2000000000 *
    abap/heap_area_total..........2000000000 *
    abap/heaplimit................20000000 *
    zcsa/installed_languages......EDJIM13 *
    zcsa/system_language..........E *
    ztta/max_memreq_MB...........2047 *
    ztta/roll_area................6500000 *
    ztta/roll_extension...........2000000000 *
    ABAP/4 processor: SYSTEM_CANCELED
    Job cancelled
    Thanks,
    Hari Immadi
    http://immadi.com
    SEM BW Analyst

    Hi Hari,
    We were recently having similar problems with the delta for CCA_9.  And activating index 4 on COEP resolved our issues.
    Yes, by default there is a 2 hour safety interval for the CCA_9 DataSource.  You could run this extractor hourly but at the time of extraction you will only be pulling postings through 2 hours prior to extraction time.  This can be changed for testing purposes but SAP strongly discourages changing this interval in a production environment.  SAP does provide an alternative described in OSS note 553561.  You may check out this note to see if it would work for your scenario.
    Regards,
    Todd

  • Error: process overdue

    hi gurus,
      what might be reasons for the error: process over due.
    how can we try to solve it?
    regards,
    Rajesh

    Rajesh,
      Processing overdue can occur due to several reasons
    1. Less number of background processes in BW. Increase the number.
    2. Multiple infosources are trying to update one infoprovider.
    3. Loading the cube without dropping the Index. Delete index first before loading cube.
    4. Tablespace / table extend problem. Check w/Basis person.
    5. All source system records have not come into BW and the BW process has time out. Check the timeout settings.
    Thanks,
    Bharath

  • Process overdue error asynchronus transmission of info idoc 2 error

    Hi
    For an r/3 job i am getting the below message and it is not progressing from last 2 days and failing in BW with Process overdue error. Can somebody advise me on this.
    data soucrce :0CO_OM_OPA_6
    The job stucked for last 10 hrs and showing 0 records in BW.
    Thanks
    Subbu

    Hi,
    What are you trying to do...
    are you performing any loads from the above said DataSource from R/3 to BW or
    are you replicating the DataSource from your source system to BW side...
    in any of the above cases..please check whether you have connected well to your source system from your BW system...
    for this right click on source system in source system section of RSA1..and check..if everything is fine...then it should take such long time to complete your activity.
    if not check in Tcode:SM59 to make sure the connectivity..which your problem can be solved sucessfully...
    hope this is clear for you...
    Regards
    Ramsunder

  • Processing overdue error when loading master data

    Hello,
    While loading data for master data infoobject, i'm getting peculiar error like processing overdue. what might be the problem.
    Please respond as soon as possible it is very urgent.
    REGARDS,
    SRINIVAS OLETI

    hi,
    is this your first upload ? the rfc connection to source system is established well ?
    try to check in monitoring
    - tab 'status', click step by step analysis, what's the status of 'RFC to source system success ?' grey ?
    - transaction st22 and sm21, any message ?
    - check menu 'environment' - shortdump - in datawarehouse, check for source system also, then transaction rfc, ale management, system log ...

  • Process chains problems : Working every day with error (red)

    Hi All,
    I have a next question, about process chains problem.
    When I start my process chains immediate, then working without errors,  but I want this process chains work every day and chainged properties, selected date/time and periodicaly (every day) but now it work with error.
    How to I find problems? What are yours offers?
    p.s. I see logs, but every day have diffence between errors.
    Regards,
    Mahir M. Quluzade

    HI,
    just check the time which you have given is OK or is overlappintg with some other job which is locking your table in process chain
    or is colliding with attribute change run
    or it fails because of lack of background processes.
    There could be numerious reasons and you need to analyze the log for this.
    But as you said the job is failing everday for different reasons..try to find the most common errors and try to remove it or mention that here.
    Thanks
    Ajeet

  • Process Overdue

    Hi i am loading transaction data and there was no psa and it was directly updating Infocube.I got an error like Process overdue and in the details tab we have like this ..
    Short dump in the Warehouse
    Diagnosis
    The data update was not completed. A short dump has probably been logged in BW providing information about the error.
    System response
    "Caller 70" is missing.
    Further analysis:
    Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
    You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
    Error correction:
    Follow the instructions in the short
    then i deleted the bad request and tried to reload manually but it the status of this job is in scheduled since 3 hrs now with my username...(Sm37) so what will be the reasin?
    Thanks for replies

    Your job doesn't have a higher priority, may it has class C and right now the process is executing job class A and B that is the reason your job is just scheduled for more than 3hrs. I don't know if you have access to change the job class in your system, if you do, you could change the job class to A. Otherwise, most likely the operations or basis will have access to change the job class so you can request them by giving them the job name.
    thanks.
    Wond

  • How to solve Caller 70 Missing-Processing overdue

    Hi Folks,
    Plz tell me how to rectify Processing overdue error which i m getting during data loading from PSA to Data Target.
    Thanks
    Ranjan Singh

    Hi,
    processing time for loading is too long.
    You can manually book data if all records from source system has arrived into PSA. Just right click on the data packet that was not updated and select "Manual Update".
    See the below links.
    Short dump in the Warehouse Caller 70" is missing
    collor 70 missing
    Error :Processing is overdue
    GTR

  • Regarding the process overdue

    hello everybody,
    i got an error saying that process is overdue.please tell me what shud i do ?
    thank you,
    madhusudhan

    hi,
    atually this process overdue error comes only if the transfer of data is taking much time.
    go to status tab make the QM status to red .then goto edit->update reversal->readeverything manually.then automatically every thing will be corrected.
    regards,
    jack

  • Process overdue error

    Hi all,
    How to reslove the process overdue error and TRFC errors.Plz tell me
    Rgds
    Bharath

    HI
    Follow these threads
    Process Overdue error
    error: process overdue
    Process is overdue (during dataload)
    error like process ovedue in extraction data
    Khaja

  • Process overdue error:Idocs inflow BW

    Hi All,
    When we are scheduling an infopackage we are encountering an error as "Process is overdue" and also says Idocs inflow BW.In the status tab we are finding the following details:
    Non-updated Idocs found in Business Information Warehouse
    Diagnosis
    IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    When we go to <b>Detail tab</b> we found red status in the extraction itself as:
    Extraction (messages): Missing messages
    If we are going for manual updation of the IDOCs by process manually we get :Data packets were found that have not yet been read
    Data packets have to be processed manually
    and finally we recieve a message as
    You can only process data idocs in simulated form in warehouse.
    How to go about resolving this issue.

    Hi,
    Try this
    solution to these kind of problem is to use your mouse to click on every possible drill down field/line
    You can use We05/We02 ..a lot many other Xns to see the status and actual error message associated.
    But as I said use drill down & find the real error.
    Re: ALE IDOC inbound processing
    Regards
    Siddhu
    Message was edited by: sidhartha

  • Image processing Manupulation problem!!!

    Dear all,
    God Morning! hope u all are fine .. i have an issue regarding Image processing Manipulation.
    i want to give u all the details.. what i have done so far in java.
    i have used third party tool of java called ImageJ editor for image manipulation.i got the source of it i have made neccessary customization to store / fetch the image from my table (Database).now this editor is working fine when i click on open option from menu bar it fetches the image from database and after fetching it put the image on container where one can edit/ modify the image and save it back to the table.
    the above proceeds me to display or store the edited image on the database . now i just want to integrate the editor on browser ..
    how to call the class file when i click on the link on specified page and also how to pass parameter from jsp page to java class file.??
    please help me to sort out d problem
    "Thanks and regards"
    Jonty

    Increasing the contrast springs to mind.
    When used to extremes it is sometimes called
    'cartoonising'
    Suppose your image was in 16 colors, you could
    reasonably safely assume at least two are red, two
    are blue, two are yellow ect.
    With regards an algorithm you are looking to 'round
    off' the color values to (my suggestion only) the
    nearest 64 or even the nearest 127...
    Bamkinjust be careful of that ORANGE color. Orange is a tricky color to define in either RGB or HSB, and is very similar to red and yellow. A little change in either direction makes it difficult to distinguish from one or the other.
    my thought would be to try to force your image to only six colors. Then those colors (it wouldn't really matter if they were accurate, as long as they are correctly distinguished) would be easy to identify.
    - Adam

  • Process order problem in COR2 - Urgent Please

    hi i have a problem in COR2.
    After creating the process order i TECO Technically complete the same,
    and when i save the process order the system just hangs.
    When i debugged the code i found that issue is inside the functional module CO_ZV_ORDER_POST - Create/change end routine order.
    It does not do the commit work properly. this is in PRD so please help me to resolve this
    I checked for other system and the process order gets saved.
    What should i do
    please help

    just  compare the  function  module  in  both  PRD & DEV  so that  see the difference in the code level  or else  in the debug  mode  upto the  hanging  code level  ....
    i think it is because of the performance  issue  ....  so  need to  be   created the index  of the  table which  it gets  updated  .....
    becuase  as your FM is  for create/chande  .... so it  will be an  big  table  .... so see it  and   do the performace trace  and  create the  index ..
    ST05 ,SCI  , SM30    .... These are  some of the  tracscation code for   Code Insecptor , performance trace & SQL trace , Runtime Analysis..
    seee if the code is  same  in both  the system   ... then it is confirmed  as   performance  issue  ....
    if the code is  different   then it is  patch level  issue ...  tell to  basis  to check the  patch level  of that  both system  and apply it.
    reward  points  if it is usefull ...
    Girish

  • How I can get rid of "Processing File" problem in downloading my apps?

    hi, I have problems updating and sometimes downloading the apps in iTunse. when I want to update an app in iTunes( using windows 8) the app stuck says "processing file" and remain for hours and never finish again. what can I do for it. now that I live in Iran. and sometimes I have to use a vpn for downloading the files and when it downloaded a bit I disconnect the vpn and resume the download. please help me how to get rid of this annoying problem. I am using the latest iTunes. in fact in every iTunes update I was looking forward to seeing that this problem is solved but it wasn't. thanks in avanced and bye.

    See Here for assistance...
    iTunes Customer Service Contact
    http://www.apple.com/support/itunes/contact.html

Maybe you are looking for