Processing takes long with ErrorLogFile in SSMS vs by Powershell

Hi,
Actually whe have some connection problems while we make a processing on a cubebuild instance. I execute a XMLA Statement in SSMS for a partition and set these Error Configurations:
KeyErrorLimit=10, KeyErrorLimitAction=StopLogging and a KeyErrorLogFile
Processing takes about 12 minutes. I see in Profiler that after about 3 minutes Processing is finished but the Application hangs for the next 9 minutes.
When I ignore all errors processing takes about 1:30 minutes.
I took a Powershell script from Vidas Matelis
http://www.ssas-info.com/analysis-services-scripts/1238-powershell-script-to-process-all-dimensions-and-cubes-in-one-db-limiting-workload and modified for my needs.
Processing tooks about 3 minutes with logging.
Any suggestions why this happens?
Actually we use ASCMD for 2012 for our processing jobs. So if our further tests succeeds we will change to PS, but it would be interesting how this could happen.
Tanx

Hi yger,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Simon Hou
TechNet Community Support

Similar Messages

Send async message between bpm processes takes long time

Hi all,
We use XI 3.0 SP16.
We have 2 BPM Processes.
One of these Processes sends an asynchronous message, which is directed
to the other (by the receiver determination defined in the directory).
In SXMB_MONI, we see that the "End Time" of the asynchronous send step
is about 3 seconds after the "Start Time".
Furthermore, when the first process sends this message to several other
processes, this time is longer, and gets up to 10 seconds for the
last "send" step in SXMB_MONI.
What can be the cause for this?
How can we minimize this time?
Thanks ahead for any help,
Yoav.

Hi Sravya,
Thanks for your answer.
The main process is similar to the Multicast pattern.
The other process(es) is an Async/Sync Bridge.
We use A/S Bridge for every receiver so that we can first send all requests asynchronously,
and only then handle responses as they arrive.
(Otherwise, a request is sent only after the former response arrives).
However, paradoxically, using A/S bridge makes the whole process take longer (for few receivers) due to the problem described.
Yoav.

Start up takes longer with yosemite

since i updated to yosemite why does it take longer to boot up my iMac

Although there may be other underlying reasons why your iMac is experiencing longer boot times, I found that the OS X 10.10.1 update did improve my boot times substantially.

Why does wifi takes longer with Lion than Snow Leopard?

My Macbook pro doesn't find my Airport nearly as quick with Lion as it did with Snow Leopard. Many times it will even jump over to another persons unlocked network even though my Airport is at the top of the preferred list of networks. It also shows a box saying that I am not connected even after I am connected, so then I have to click the box just to remove it. This is annoying as ****. Why is this happening? There weren't any similar problems when upgrading fron Leopard to Snow Leopard.

My Macbook pro doesn't find my Airport nearly as quick with Lion as it did with Snow Leopard. Many times it will even jump over to another persons unlocked network even though my Airport is at the top of the preferred list of networks. It also shows a box saying that I am not connected even after I am connected, so then I have to click the box just to remove it. This is annoying as ****. Why is this happening? There weren't any similar problems when upgrading fron Leopard to Snow Leopard.

Miro execution takes long time

Hi Experts,
While posting Credit memo for Purchase returns in MIRO, processing takes long time, it takes hours to complete entire posting.
For each inputs say while entering PO number, selecting tax code, selecting 'calculate tax' checkbox it takes minimum 10-15 mins for each to process.
I processed with following parameters.
PO contains 10 line items.
Tax code : C2(ED(1021)+VAT 5%)
Indicator: Goods Items/Delivery Costs/Both.
Version: EHP4 FOR SAP ERP 6.0 / NW7.01
Please advice to resolve this issue.
Regards,
Sathish

Hello Sathish,
this looks very strange. I guess you have some bad performing user exit inside. Otherwise MIRO should not perform that bad for the document with 10 items.
If you don't want to create an SAP message for that, you can try tracing an execution with ST12 transaction (more details here: http://wiki.sdn.sap.com/wiki/display/ABAP/SingleTransactionAnalysis
Regards,
Yuri

Validate map in FDM takes long time and finally expires

Hi,
I have an issue with FDM Mapping.
When i click the "validate" option in workflow, the FDM processing takes long time (more than an hour) and finally expires.
But when i open a new web interface, i am seeing a gold fish on validate - which means validate mapping has been done.
As we are in production environmeny, Can someone quickly clarify me, why this happen.
Thanks,
Siva

Hello Kelly,
Something you said concerns me: +"Because we automated data loads for the large file, this issue is extremely low on the priority list."+
In this type of scenario we notice customers/partners implementing FDM as an 'ETL' utility. FDM is not an ETL utility and should not be treated/used as such. In the event that you are doing this, Support has no control of the application as it is a mis-use of what FDM is for.
Files that are being pushed into FDM should always be broken down into the smallest components(locations) and used as a 'front end,' user interface.... not a server-side/IT application. If you meet this criteria of FDM, then there is not much Support can do.
If you do not think you are misusing FDM, I would highly suggest you open/create a Support SR if you do not use FDM in that manor. Consultants/Partners are functional/design based.... and not necessarily trained as Support Engineers. Therefore they might not have the skills required to make such determinations.
Thank you,
Oracle Global Customer Support

Startup process gets longer and longer

Hi, my parents have an iMac (purchased in 09) running OS X 10.9.5. Over the years and especially lately, the time it takes to startup has gotten longer and longer.
Any advice or suggestions would be much appreciated.

Babowa,
Below are the results of running etrecheck and I apologize for taking so long getting the results to you! Thanks very much!
Problem description:
Startup process takes longer and longer (especially lately)!
EtreCheck version: 2.1.5 (108)
Report generated December 19, 2014 at 12:29:58 PM PST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (20-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:4:4
Disk Information: ℹ️
Hitachi HDT721032SLA380 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.88 GB (275.79 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Conduit [Remove]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Launch Agents: ℹ️
[running] com.zeobit.MacKeeper.Helper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Skype UNKNOWN (missing value)
Documents FolderHidden (/Users/[redacted]/Documents)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
Silverlight: Version: 4.0.60129.0 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Dic's Thumb Drive [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      54% Mail
      7% WindowServer
      4% HP Device Monitor
      4% NotificationCenter
      3% opendirectoryd
Top Processes by Memory: ℹ️
198 MB Mail
112 MB mds_stores
94 MB Microsoft Word
82 MB WindowServer
77 MB Safari
Virtual Memory Information: ℹ️
1.45 GB Free RAM
1.63 GB Active RAM
460 MB Inactive RAM
483 MB Wired RAM
422 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 19, 2014, 12:26:32 PM Self test - passed

Take long to sync contacts and notes calandario 6800 and with Microsoft Outlook already have 2 hours and not finish the process please help

take long to sync contacts and notes calandario 6800 and with Microsoft Outlook
already have 2 hours and not finish the process please help

Where error messages are you getting?
Can you not do both? Send and Receive?
Check but I think yo have the right setting described here:
iCloud: Mail server information

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

When I need to open a folder on the desktop takes long time to open, so it is with the hard drive?, I'm using Maverick

The system boots without any problem, applications without a problem when I'm on the desktop and I need to open folders taking forever to open and for a moment I open and blocks other thing that the colored circle appears, use ten folders on the desktop where I'm keeping this information and take process and lock the desktop makes my job a little slow, and does anyone know anything about all of this as repairing system error?

Have then select one of the photos and type Command+i. In the Info window that comes up check to see which application is set as the default application. If it's iPhoto therein lies the problem. Regardless of what is set for the default select Preview and click on the Apply to All... button. See if that will fix the problem.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

DSO activation in Process Chains - takes long time

Dear All,
We have included DSO activation in Process Chains. This process takes a long time to execute. We manually cancel the corresponding process in Process Overview and repeat it from chain. The chain runs daily and this issue also occurs on a daily basis.
Does anyone one of you have an idea of how to deal with this performance issue?
Regards.

Figure out in which class does your process fall in:
Class A- High Priority
Class B- Medium Priority
Class C- Least Priority
Background processes
Class A jobs
The number of work processes reserved for job class A is a subset of the number of background processes.
You should only reserve work processes for job class A if it makes sense within your system organization. Work processes reserved for class A jobs are no longer available for job classes B or C.
Set parallel processing for a specific BW process in the (variant) maintenance of the process
Call the function for setting the parallel processes.
You can call the function in the process variant maintenance of a process chain or in the process maintenance. The function call varies for the different BW processes.
For example, in the data transfer process you call the function with Goto--> Background Manager Settings.
The Settings for Parallel Processing dialog box appears
Under Number of Processes, define the maximum number of work processes that should be used to process the BW process.
If you enter 1, the BW process is processed serially.
If you enter a number greater than 1, the BW process is processed in parallel
In the Parallel Processing group frame, make the relevant settings for parallel processing in the background:
Enter a job class for defining the job priority.
The job priority defines how the jobs are distributed among the available background work processes
In the group frame Parallel Processing, you can define whether parallel processing should take place in dialog work processes or in background work processes for the processes ODSACTIVAT, ODSSID and ODSREQUDEL for the DataStore object
Transport:
The entries in tables RSBATCHPARALLEL and RSBATCHSERVER are written on a transport request of the Change and Transport System.
Edited by: ram.pch on Oct 7, 2011 9:55 PM

CV04N takes long time to process select query on DRAT table

Hello Team,
While using CV04N to display DIR's, it takes long time to process select query on DRAT table. This query includes all the key fields. Any idea as to how to analyse this?
Thanks and best regards,
Bobby
Moderator message: please read the sticky threads of this forum, there is a lot of information on what you can do.
Edited by: Thomas Zloch on Feb 24, 2012

Be aware that XP takes approx 1gb of your RAM leaving you with 1gb for whatever else is running. MS Outlook is also a memory hog.
To check Virtual Memory Settings:
Control Panel -> System
System Properties -> Advanced Tab -> Performance Settings
Performance Options -> Adavanced Tab - Virtual Memory section
Virtual Memory -
what are
* Initial Size
* Maximum Size
In a presentation at one of the Hyperion conferences years ago, Mark Ostroff suggested that the initial be set to the same as Max. (Max is typically 2x physical RAM)
These changes may provide some improvement.

HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

The "issues" you've raised are nothing to do with the iCloud service.
No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

HT201441 What if the owner is no longer with us is there a way to take off their account?

What if the owner is no longer with us is there a way to take off their account?

Welcome to the Apple community.
Unfortunately not.
If you are able to contact the owner of the Apple ID, ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device has been erased and removed from the account, you can proceed with the device setup process.

How long does the number porting process take?

Hello Everybody! I just got my iphone (witch I LOVE it by the way) but I was wondering, how long does the number porting process take?
I ported my phone number over from SprintPCS last night at around 7pm EST and right now it's 8am EST and my Palm seems to still be working... Is this normal?
I'm still receiving incoming calls to my Palm, Text messages to my Palm, but yet I can do outgoing calls from my iphone... I'm kinda confused...
I mean I received the text on my iphone from sprint telling me: "Welcome to AT&T" as well as receiving the e-mail saying my new phone number is the same one I've had for 6 years now... Is 13 hours considered normal?
Thanx! :-D

QueenYvette,
If it continues to be an issue tomorrow, I would recomend calling again, and getting in contact with AT&T's porting department. They are familiar with resolving any issues that may arise.
Powering off both phones is to make sure that the old phone is not maintaining an active connection with the old carrier that can interfere with the last steps of the porting process. If at all possible its a good idea to leave the old phone powered off, and restart the new phone about once an hour so that it will resync with the towers.
Hope this helps,
Nathan C.

Processing takes long with ErrorLogFile in SSMS vs by Powershell

Similar Messages

Maybe you are looking for