Processing the calllog.mdb file (UC520)

Hi Cisco Folks,
Really not sure if this is the right place for these questions. It's REALLY hard to find out any information at all about this kind of stuff.
I mean, google "calllog.mdb". Not much. Do a search for "mdb" in this site, and nothing. Or "calllog". Nothing. Makes me wonder if I'm dealing with some kind of 3rd Party stuff, but am pretty sure it's cisco information.
I'm trying to process the "Log" file in the "Calllog.mdb" file that comes from our UC520.
Have got a question.
1.
It looks like there are 2 records for most calls, and most of the time the PositionNumber and OtherPartyNumber are swapped around (the call is made so there is an acknowledgement record).
What's confusing me the most at the moment is:
* Do the "PositionNumber" and "OtherPartyNumber" fields change meaning based on the "Direction" and/or the "External" field values?
Am asking this because the records in front of me at times seem to contradict. Just when I think I've sorted out the logic, it messes me up again.

Hi Alex,
Thanks for the response.
I've discovered the logic that I needed.
For anyone who reads this with a similar issue:
* The "PositionNumber" field is almost always (when dealing with physical numbers, rather than ones like "150", voicemail etc) the number within the Cisco system.
* The "OtherPartyNumber" is always the other number, whether external or internal.
* Then, "Direction" shows who originated the call ("In", means OtherPartyNumber did, "Out" means PositionNumber did).
The key for me was realising that "PositionNumber" was always (in the first record of the usually 2 or more records for a phonecall) the number from the Cisco system.
Hope this is of help to anyone who comes looking the same way I did!

Similar Messages

  • When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

    This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
    There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
    Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
    EDIT: [Redacted]
    EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
    I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
    second time, it installed fine.
    I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
    That is when I tried another install of Server 2008 and received this error message about an answer file.
    I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
    answer file.
    I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
    Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

    Hi,
    As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
    I asked "OEM or retail" because of this known issue:
    "Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
    http://support.microsoft.com/kb/2425962
    An answer file may already contain in the disc which causes the issue.
    If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
    If you have any feedback on our support, please send to [email protected]

  • Im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

    im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

    i have been dealing with this same issue, tried to  turn off firewall and even turn of antivirud but still it gave me the same error.

  • Getting "Windows could not parse or process the unattend answer file for pass [specialize]" with IE10 integration? Read this...

    Hey guys,
    I just discovered an issue with using MDT to integrate Internet Explorer 10 into Windows 7 & 2008 R2 image files. Building the images was no problem at all, but when I tried to deploy them it would bomb with this error every time:
    "Windows could not parse or process the unattend answer file for pass [specialize]."
    So a very annoying and cryptic error to say the least. Obviously the issue was with the unattend.xml file that gets auto-generated by MDT, but all the items under "specialize" had worked just fine when I built the image and the IE version
    was the only item that had changed. After comparing the Windows 7 & Server 2008 R2 unattend.xml files to my Windows 8 & Server 2012 unattend.xml files (because they have IE 10 native) I discovered that the following flag was missing
    from the Windows 8 & Server 2012 unattend.xml files:
    <IEWelcomeMsg>false</IEWelcomeMsg>
    So I simply commented it out like so:
    Re-ran my test deployment and viola, 100% successful with zero errors. I was a little embarrassed/annoyed that this took me so long to track down, then I realized others might be struggling with this too so thought I'd share.
    Hope my time spent saves someone else some grief!

    I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
    system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
    MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
    last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
    ~Adam

  • I get a "Unable to process the back up file" error message when trying to restore the bookmarks I lost when I follwed the prompts to Reset Firefox settings.

    I followed the prompts over the weekend to reset my Firefox settings, reassured by the message that said it would save my bookmarks, and now they appear lost. I followed the steps of your help articles and got the error message above. Help!

    You can check for problems with the places.sqlite database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    *http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

  • Processing records using Flat file ActiveSync resource

    Hi Folks,
    I was working on flat file activeSync resource adapter. Documentation says the following..
    The Flat File Active Sync adapter can track the timestamp of a flat file. In addition, the adapter can archive the last file processed and then compare it to the most recent version. Identity Manager will then act on the accounts that are different in the two files.
    If these features are enabled, the first time Identity Manager polls the source flat file, the system copies the file and places it in the same directory. The copied (archived) file is named FFAS_timestamp.FFAS, with the timestamp indicating the last time the original file was changed. The format of the timestamp is determined by the operating system on which the source file resides.
    On each subsequent poll, Identity Manager compares the timestamp on the original file with the most recent timestamp. If the new timestamp value is the same as the previous value, then the file has not changed, and no further processing is performed until the next poll. If the timestamp values are different, Identity Manager checks for the presence of the FFAS file. If the file does not exist, Identity Manager processes the updated source file as if it were a new file.
    If the timestamps are different and the archived FFAS file exists, Identity Manager compares the source file with the archived file. The comparison will filter any users that have not changed. If a user has changed, then it will be sent through the adapter in the normal manner, and the configured process, correlation and delete rules determine what to do with the user.
    I have set the following attributes in synchronization policy as
    Track Last Processed Timestamp : true     
    Process Differences Only : true
    Unique Key for Diff : <some attribute>
    I have the following flat file..
    PERSONID,accountID,FIRSTNAME,LASTNAME,NATID,BIRTHDATE,EXTERNALID,TYPE,COUNTRY
    10004,,test,4,123444,12/01/1804,204,A,USA
    10005,,test,5,,12/01/1805,205,M,USA
    There is no user account in IDM repository. After processing this file, my code creates the above accounts in IDM.
    I deleted the above two accounts from IDM using admin interface and the accounts are not created again. So far good.
    Now I opened the above flat file and just saved again. It creates the account in IDM.
    According to the above documentation, it should not create the account as the flat file is already processed based on diff operation. Then Why it is creating the account again in IDM? Any logic??
    Your repsonse will be appreciated.

    Hi,
    I am pretty sure this has been working for me but with IAPI.Cancel. Please try to capitalize the C.
    Regards,
    Patrick

  • Photoshop Camera Raw Version to Process Nikon 1AW1 NEF Files

    I am currently running Photoshop CS6 for Macintosh version 13.0.4 and Camera RAW version 7.4.0.137 and cannot process the raw (NEF) files produced by the new Nikon 1AW1 camera.  I have shot test photos with the camera prior to purchase, but can't process the NEF files.  Does a Camera Raw plug-in that will work with this camera exist?  If not, when will the appropriate plug-in be available?

    The Nikon 1 AW1 is not yet supported by Adobe Camera Raw (ACR).
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Adobe never comments on future camera support in ACR but ACR is updated every few months as new cameras come on to the market.
    You'll have to use the import software provided by Nikon for now.

  • Reading mdb files

    Is there any utility to read mdb files through java. I need to read the standalone mdb files as there is not database running. I am aware of jackcess, any other info will be helpful.

    Try with this tool that is useful for reading of a Database through SQL
    Good Luck
    http://jeffreytravis.com/lost/labsql.html
    Antonio Garcia Olais

  • Mdb file vs. accdb file

    I am a brand new user of Crystal Reports.  We recently upgraded to Access 2007 and quickly discovered that no longer have access to our Crystal reports in our database.  We were told that our old version of Crystal doesn't communicate with our new version of Access.  So, we upgraded Crystal to 2008 and I continue to get the following error message:
    Logon failed.
    Details: DAO Error Code: 0xd0f
    Source: DAO.Workspace
    Description: Unrecognized database format 'S:\Data\Databases\Project\ProjectDatabase.accdb'.
    It doesn't seem to recognize the new accdb file and instead looks for the old mdb file which no longer exists.
    Any suggestions are much appreciated.
    Sherry

    Hi Sherry,
    The DAO technology cannot be used to access the Microsoft Office 2007 file formats: Microsoft Access 2007 .accdb, Microsoft Excel 2007 .xlsx (XML) and .xlsb (Binary). These file formats are supported using the Microsoft 2007 Office System drivers for ODBC and OLEDB.
    I suggest that to download and install the u201CAccessDatabaseEngineu201D to work with MS Office 2007.
    Resolution:
    1.Go to the following link:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=7554F536-8C28-4598-9B72-EF94E038C891&displaylang=en
    2.Download the u201CAccessDatabaseEngine.exeu201D and install it.
    3.Create a new ODBC DSN to your database before you set the data source location.
    First create a Data Source Name
    Note: Please note that you have to use Microsoft Access Driver (*.mdb, *.accdb) as driver for connecting the database.
    4.After creating the DSN, I suggest you to set the data source location in that report.
    I suggest that refer to u2018Crystal Reports Online Help (F1)u2019 for information on how to set datasource location in Crystal Reports 2008.
    Please ensure that you need to u2018Verify Databaseu2019 immediately after setting datasource location for the report. In order to do u2018Verify Databaseu2019 from Crystal Reports, please follow the steps given below:
    1.Go to u2018Databaseu2019 menu | u2018Verify Databaseu2019
    2.A message stating u2018Database is up to dateu2019 would appear.
    Now refresh the report.
    Hope this helps.
    Shraddha

  • Is it wise to keep the Nikon camera files "DSC's"  after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera'

    Is it wise to keep the Nikon camera files "DSC's"  after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera's DSC files?

    DNG files do not contain some metadata supplied by the camera, which can be used by the manufacturer's software. Thus, if you don't keep the original Raw photo, you will lose this information.
    If your 1000% sure you're never going to use the manufacturer's software, then this isn't a problem. But who can be sure what software you will be using 10 years from now?

  • How do I replace bookmark bar that was lost when a new Mozilla Fox Start page suddenly appeared with a Zone Alarm Community Toolbar, and nothing I have so far tried, working with "Show all Bookmarks", works ("Unable to process the backup file).

    My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
    Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
    I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
    Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
    I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
    It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
    I'm out of ideas. Is there something else to try?

    Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
    If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    * Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
    * Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
    See also:
    *http://kb.mozillazine.org/Uninstalling_add-ons
    *http://kb.mozillazine.org/Uninstalling_toolbars

  • TS3694 Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out.

    Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

    Hello,
    my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
    Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
    my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
    Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
    Thanks in advance!
    Sincerely,
    hoho33

    "
    Can you restore that JSON backup in a new profile?
    Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
    A JSON backup starts with: {"title":"","id":1,"dateAdded"
    A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
    You can try if you can restore that JSON backup in a new profile.
    Create a new profile as a test to check if your current profile is causing the problems
    See Basic Troubleshooting: Make a new profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
    No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
    MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
    I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
    Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
    I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
    like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
    firefox support won't to help me to solve my problem!
    If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
    like HP, Dell , etc. give remote desktop support to their users!
    Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
    Greetzz

  • HELP! Lost ALL my bookmarks & Bookmark Toolbar is empty. Attempts to restore from the backup files yields an error message that says, "Unable to process the backup file." Have tried opening nearly all 10 existing backups w/same result.

    I was in the midst of a Firefox session w/two windows open. Nothing special about the sites. No fancy javascripts or anything. When I closed the second window and opened the "History, Show all History" pull-down, the Library screen had no data in it.
    I looked for the Bookmarks.html file in my profile and it is missing. I tried renaming an old .bak file from a couple years ago and I can open it as a file and see the text of it displayed but Firefox will not recognize it as and open it as the Backups file.
    Following the directions already posted - using "History, Show all History" then the "Import and Backup, Restore" process - allows Firefox to see all the backups, but trying to restore from any of them yields the "Unable to process the backup file" error message.
    I have re-started my machine from a cold start - twice now.

    The file that stores bookmarks is probably damaged, for details on how to fix that see http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

  • How can I process an xml/xsl file pair that require the Internet Explorer dom?

    My personal navigation device (GPS) generates xml files that contain a record of where I have been, together with when I was there, how fast I was driving at the time, etc. taken at approx. 5 second intervals. This xml file has an xml-stylesheet with type="text/xsl" but that stylesheet is written to the Internet Explorer dom standard. The stylesheet interfaces with google maps to display a map that shows my path and it also displays tables of data including distances that are computed from latitude/longitude pairs. I can supply a small sample xml file and the xsl file as well if they are needed to diagnose my problem. I cannot find any browser other than Internet Explorer that handles these files satisfactorily. I prefer to process them from a Linux environment but with the Internet Explorer requirement I cannot do so. The browsers that I have tried and that have failed are Firefox, Opera, Konqueror, Chrome, Epiphany, Midori, Arora, and Links.
    One line in the xls file in particular gives grief in the browsers like Firefox that at least attempt to do more than display the raw xml file:
    xmlns:cymath="urn:smiletime-cybarber-net:math"
    A comment in the xls file says this about the problem:
    "Tested and currently only compatible with Internet Explorer version 6 or version 7 (as this script includes JScript functions called by XSL, msxsl:script extension is required; also, the produced XHTML document embeds javascript functions exploiting the IE DOM).
    "In order to provide compatibility with Firefox, other than checking the compatibility of the IE DOM, the cymath:distCosineLaw function still needs to be ported."

    You may get an answer, but it is not really the sort of subject covered by this forum, I suggest you try [http://forums.mozillazine.org/viewforum.php?f=49 Mozilazine] and if you solve the problem post back again.

Maybe you are looking for