Processing the new pricing automatically

Hi dear.
I set to change the tax rate when I change the shipping point in VA01 or VA02.
But it is not change automatically.
So I should click the update icon in condition tab and choice "B. Carry out new pricing".
I want to process new pricing automatically when I change the shipping point in VA01 or VA02.
How can I do?
Thanks Regards
Edited by: Han Seok Jung on Jun 22, 2010 6:12 AM

Hello,
This cannot be achieved thru SAP Standard settings. Because Shipping Point is not relevat to determine Taxes. If you change Plant or Ship to party then the Pricing (Tax) would be re-determined automatically.
In your case you will have to speak to your ABAPer & apply a User Exit (mostly USER_EXIT_FEILD_MODIFICATION would be helpful...)
Hope this helps...
Thanks,
Jignesh Mehta

Similar Messages

Is there any way to update the new pricing automatically?

Hi,
with reference to the below link i have some queries
Re: is there any way to update the new pricing automatically?
i din understand the below point mentioned in the thread
You see this option is changes sales order(VA02), item pricing, update tab at the bottom.
can u pls explain ?
Thanks in advance.

Hi,
First of all it is not at all possible that you have added something to user exit for sales order and that is affecting billing.
While billing try
USEREXIT_PRICING_PREPARE_TKOMP
instead of USEREXIT_PRICING_PREPARE_TKOMK.
Also, you need to sit with the SD functional person to check and decide upon what config is to be adopted in copy controls for pricing type. In case you wish to do everything through the user exit then std controls need to be set in a way that whatever is in sales order should come up in billing, inclusive of manual conditions unchanged.
In case of short dump issues, the code is not written at the right place. Before your code write
break-point
which will give you an idea of what is happening at runtime while creating billing document in debugging mode.
Hope this helps.
Regards,
Amit

I have a lot of videos processed using elements 2. I have bought a MAC. If I buy the newest version of elements for my new mac, will i be able to easily transfer the videos to the newest version i.e. will the new software automatically integrate the wor

I have a lot of videos processed using elements 2. I have bought a MAC. If I buy the newest version of elements for my new mac, will i be able to easily transfer the videos to the newest version i.e. will the new software automatically integrate the work done on those videos. What is my best option to transfer those videos to my new mac. Thanks

phyli2
What is your "Elements 2" - Photoshop Elements 2 or Premiere Elements 2? For now I will assume Premiere Elements 2 which had to be on some version of Windows.
What do you have from Premiere Elements 2 - project files (.prel) or exports to file formats such as .avi or .mpg or .mov?
Project files from Premiere Elements (any version) Windows cannot be used in Premiere Elements (any version) Mac.
Video files exported from Premiere Elements 2 with its QuickTime choice (.mov files) would be likely to open in Premiere Elements 13 Mac. The other Premiere Elements
2 choices of MPEG and Windows Media would be expected to need conversion to .mov or .mp4 before import into Premiere Elements 13.
In Premiere Elements 13 Mac, consider importing the files from wherever you save files in Mac to a project with the project's Expert workspace Add Media/Files and Folders/Project Assets. I would strongly encourage you to set the project preset manually (File Menu/New/Project) to match the properties of these source files before import rather than let the project do it manually for you based on the properties of the first video dragged to the Timeline.
Please supply more details so that we can fine tune the reply. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

A way to have the new ipad automatically connect to Wi-Fi or AT&T?

Is there a way to have the new ipad automatically connect to Wi-Fi or AT&T depending on what is available? For instance, I have the new ipad connected to the wi-fi in my office. While driving to work I connect using the AT&T network. When I walk into my office it does not automatically switch over to wi-fi. I have to physically go into settings and turn cellular off so that it doesn't use my AT&T data while I'm in a location that can use wi-fi. I am curious because my phone (not iphone) is connected to my wi-fi also and it automatically connects when I walk into my office so all my calls are free and then when the wi-fi signal is not in range is automatically goes back to the cellular network so I don't ever lose coverage. Can I set up the ipad to do that?

That is how your ipad is designed to work.
Maybe try resetting network settings. If all else fails you can do a back up and restore as new to be certain there is no issue with your software.

Any way to process the new Sony a77 m2 RAW files , I know it is early :)

Any way to process the new Sony a77 m2 RAW files , I know it is early
Just curious if there is a work around now. So, I can get it in LR
HG

There is no Adobe raw support yet for this camera that was only announced May 1.
You’ll have to wait until the public release candidate for either LR or the DNG Converter becomes available at Adobe Labs at some point in the future: http://labs.adobe.com/
If the sensor and optics are exactly the same as a previous camera, then you might be able to hack something into working by hex-editing the raw files to pretend they are that other camera, but I don’t have any information about what camera that might be.
About the best you can do, for now, is use Sony’s software to output TIFs from your raw files, and then edit those TIFs in Adobe software. Be sure to adjust the WB before outputting the TIFs.

Love the new pricing

When BT Youview first launched I ordered the Unlimited Extra package at £15pm, when the extra channels launched I added them bringing the total to £18pm.
A few days ago I heard about the extra channels for £3pm and though uh ho, more money. Pleasantly surprised to noticed that the Unlimited Package has been split up and I was able to take out kids and music as I never watched them. I've now added the HD extra channels and actually saved money.
Well done to BT for making the packages separate and letting us choose what we want to watch.
Here's the new order, HD extra channels and costs me less, noticed a £2 discount too

Although at the moment I personally feel disadvantaged by the new pricing structure I do feel it is the right way to go as on Youview we do have optioins to effectively opt for additional player content from other suppliers. Thus it is sensible for BT to have a more flexible build your own package approach.

How to block the new customer automaticly

Hi,
To create the new customer by sales area via xd01, how to block this customer by sales area automaticly?
thx.

hello, friend.
i am not aware of any feature in XD01/XD02/XD03 that will allow you to automatically block the customer. however, there are settings in credit management that can propose a risk category for new customers which can have block settings.
if this interests you, please check IMG > ENTERPRISE STRUCTURE > DEFINITION > FINANCIAL ACCOUNTING > DEFINE CREDIT CONTROL AREA.
regards.

Can the new express automatically log in to my isp that uses adsl.

My ISP has given me an ADSL modem which plugs in to my macbook's pro ethernet port and safari directls me to a url when i try and open a page. i'm supposed to log in to that url and then i'm able to access internet from all my devices. i dont know what sort of authentication it is but its not pppoe.
the problem here is that if i use a wifi router, i have to keep the device that first connected to the internet, in a given session, continuouisly connected inorder to be able to access internet from other devices. i was planning to buy the new airport express. i was wondering if it can store the login info in some way so that i can not worry about logging in and just use any deivce i want, freely?
Neerav

Run the ethernet cable from your ADSL modem into the WAN port on an Express, run Airport Utility and within minutes you'll have a dual band Wi-Fi network up and running.
The confusion comes from this, Extreme Bases and Express' are Routers, they route an internet connection into a Wireless connection.
Extreme Bases and Express are NOT Modems.
The Router/ Modem supplied by your ISP is probably a bulk purchase cheaply made number with low quality innards inside.
I always use the supplied Router/ Modem as a modem only, then run an Ethernet from the Modem into an Apple Base Station and run my network from their.

When typing an email I need each new sentence to automaticaaly start with a capital letter. At present after a full stop the new sentence automatically starts with a lower case letternot an upper case one

When typing an email new sentences do not automatically start with a capital letter after a full stop.
Surely this should happen automatically without the need for me to touch the capital letter icon.
peter

peterlesliebabani wrote:
i called apple and the guy i spoke to said it is probably a VIRUS and it will be corrected on the next update!
Either you didn't actually call Apple, and got some tech support scammer instead (calling the first number that pops up on a Google search for "Apple support" can give you some bad numbers), or the Apple tech you spoke to didn't know what he's talking about. It's not a virus.
As for the problem, if you have enabled auto-capitalization and the problem continues, first try resetting your device. Press and hold both the home button and the sleep/wake button for about 10 seconds, until the screen turns off. Ignore the slider that will appear. Release the buttons, then press and hold the sleep/wake button until the Apple logo appears. This is the equivalent of a reboot, and should not affect your data or apps.
If that doesn't help, try restoring your device from backups, and if that doesn't help, restore it to factory settings (ie, do not restore a backup). See:
http://support.apple.com/kb/ht1414
If none of that helps, the issue is caused by some kind of hardware problem, and the device will need to be repaired or (more likely) replaced.

What are the new pricing and fees for Cs6?

What will I be forced to pay to keep upgrading my Master Collection to the next version (Cs 6)? Can I still purchase Dvd's and install the software on my own computer or will I be forced to move to the non-safe cloud? Where my hardwork can be hacked and stolen! The cloud is worthless to many of us wishing to keep control over copyright and useage rights.I am guessing more people want to keep it the way it is and not shift control over to a hackable cloud. Nothing on the web is safe, so why shift everything over to the cloud and force many of your long time customers to pay monthly fees or the software locks us out. For over 25 years I have bought and paided for Adobe software, where is my monthly kickback for using your software? If this is the wave of the future I guess i have bought my last upgrade!

I think you misunderstand the cloud.
Nobody is going to force you to store your files there. It’s a part of the service that you can use or not use at your own discretion.
As for pricing, if you’re on CS5 or CS5.5 you will be able to buy an upgrade at reduced pricing and continue that route. If you’re on CS4 or earlier you’ll have three choices.
1.       Pay full price for CS5
2.       Move to Creative Cloud for whatever the subscription price is
3.       Stay with what you have.
Hope that helps,
Bob

What's up with the new pricing?

Why isn't DVD Studio Pro being sold as a stand alone product? As an owner of DVD Studio Pro 3.0 I was looking forward to upgrading to the universal binary version of DVD Studio Pro 4.0 or 5.0 and now the only way I can do that is to pay for a $1300 box full of programs I don't need. What's up? Why would Apple price DVD Studio Pro out of reach?

This is most certainly for real.
Apple conducted a survey - many folks here got invitations to participate - and one of the conclusions from it was that most people who work with the Pro Apps use at least FCP and at least one other app. So Apple feels that it makes 'sense' to sell the apps as Final Cut Studio only since the user base is, predominantly, folks who are one-stop shops (in that they edit, do graphics, process audio, then author DVDs).
You're apparently an exception, Lee, but I don't know anyone personally who uses DVD Studio Pro and who doesn't own at least FCP as well.
That being said, I can understand your frustration, since there is no path from DVDSP3.

MM PO - New Pricing Routine / user exit / at Line item

Hi
When ever a line item data gets chnaged, we need to do the Update Pricing / New pricing Automatically.
Currently we are doing this manually and would prefer to automate -
request for possible suggestions / solutions OSS notes for this functionality.
cheers
Nandu

Hi
Look at using BADI ME_DEFINE_CALCTYPE to select the pricing type B (carry out new pricing) whenever you make a change to PO item.
You need to go through the documentation of this BADI before you use it to make the correct program changes.
Hope this helps.
PP

Invoice corrections Sales order- New Pricing is not carried out

Hi All,
waiting for some one to guide me in a right way...
I have Scenario where creating a invoice correction request with reference to Invoice document.New pricing is not carried in debit line item even though i changed the pricing date as current date for the line item
When i copied with the invoice document, 2 new line items are created with a same price conditions.
1st line item is a credit and 2nd line item is a debit item.
I need to do a price adjustment in debit line. So i maintained a new pricing record for the material to carry out the price.
To achieve this in customizing VTAF (billing to sales) I have tried multiple options as below in 2nd pricing type field as B,C,D,E and F
2nd Pricing type - B Carry out new pricing
C     Copy manual pricing elements and redetermine the others
D     Copy pricing elements unchanged
E     Adopt price components and fix values
F     Copy pricing elements, turn value and fix
But still the new pricing is not carried out.I tried to manually change the Pricing date in the line item level, still the new price is not updated in the order.
I have seen SAP Help in below link the Debit line can update with correct price point 3 in proces flow , check this below link for reference.
http://help.sap.com/saphelp_46c/helpdata/en/dd/55feeb545a11d1a7020000e829fd11/content.htm.
Please help...
Regards,
Parthiban

Hello Parthiban,
I feel you are aware of the effect/functionality of 2nd pricing type.
In the invoice correction request, two items are automatically created for each item in the invoice to be copied (which you did mention):
- first item:   credit memo item
- second item: debit memo item
And for invoice correction request, a particular pricing type is needed for the second item.
So as per standard, you have to use pricing type 'E' for the credit memo item to guarantee that the item will not be changed.
And you should give a new pricing type to the debit memo item.
The system creates a credit or debit memo depending on whether a postive or negative difference is generated.
So that means
Pricing type will effect ItemCat Proposal-G2N
and 2nd pricing type will effect 2ndItemCatProposal-L2N
Now, make changes in pricing type based on your business requirement.
I hope this will assist you in understanding.
Thanks & Regards
JP

Carry out new pricing at invoice

Hi all,
My requirement is to carry out pricing at invoice and not copy from sales order.
For this, I goto tcode VTFL and opened copy control for LF to F1. I changed pricing type from C to B but still system is copying price from order and not carry out new pricing automatically at the time of invoice creation.
please update that what needs to be done.
Many Thanks.,
AI.

I changed pricing type from C to B
First please dont post the same question related to an issue in multiple times.
Coming to the issue, you have to test this by creating a new sale order. Existing orders will not change once you change the copy controls. It will have impact only on the newly created documents.
Last but not least, as for as possible, continue your queries in the other thread and close this one.
thanks
G. Lakshmipathi

Creating a Invoice with reference to another invoice with new pricing proce

Hi People,
I want to raise a supplimentary excise invoice for the differential price.
I want to do it by raising a supplimentary commercial invoice with reference to the old invoice but with a new pricing procedure assigned to it.later on raise the supplimentary excise invoice with Tcode j1iin wrt the new commercial invoice.
Although i have done all the necessary configurations such as determination of new pricing procedure, Doc pricing Procedure and changing the pricing type at the copy control settings of the item category to "B".
i am unable to get the new pricing procedure when i am creating the supplimentary commercial invoice.
Can u people suggest me in this regard

Dear Nagabhushan
Normally for price difference, there is an order type RK for "Invoice Correction Request" which should be created in reference to F2 billing document. Based on this, you can issue credit memo (document type G2).
This being the case, you cannot create supplimentary invoice with reference to original invoice. Moreover, for all excise related adjustments, you should not use j1iin. You should run j1ih - Other adj.
thanks
G. Lakshmipathi

Processing the new pricing automatically

Similar Messages

Maybe you are looking for