Processing time has slowed to a crawl since install of ViewSonic monitor.
All processing functions have slowed to a crawl since I installed a ViewSonic monitor VX2270Smh-LED. The system recognized the monitor immediately. It is connected through the Mini-DVI port on the MacBook Pro and through an adapter to the DVI port on the monitor. I have the displays configured as one very wide monitor so I can move windows back and forth. It doesn't seem to matter what I am working on, browser, spreadsheet, email, every command results in the spinning wheel.
Have looked for a driver for the ViewSonic but they don't make them. Is there something available with Apple that will help this?
To isolate whether the monitor is really the culprit I would run a benchmark without the monitor connected and with.
You should rely on the numbers from the benchmark to tell whether there is a difference. Perception can be a very dicey thing.
I have used xbench:
http://xbench.com
Once you have performed the test in the two cases (not other applications running) report back here the results
Similar Messages
-
I have a mini mac with 8GB ram and running yosemite OS. I recently installed security update 2015-003 and now my internet connectivity have slowed to a crawl. sometimes if I turn wi-fi off and then back on the speed returns to normal but sometimes it does not. Any ideas what may be causing the slow internet speed?
Please check the speed of your connection on this site.
Then start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Check again. Then restart as usual and post the results. -
My MacBook Pro has slowed to a crawl. It started when I was printing off the internet. Now I get a "spinning ball" with many actions. Any help?
Try your fellow MacBook Pro owners forum -
MacBook Pro
Support:
http://www.apple.com/support/macbookpro
Latest (manual) downloads from Apple (but check vendor sites also for scanners, printers etc) and rule out a bad cable as well.
Apple Downloads -
Network traffic slowed to a crawl after installing RV325
I hoping someone can help me. Yesterday I installed an RV 325 on an existing network to replace a netgear router. Now traffic has slowed to a crawl.
Initially I had both the Domain Controller and the switch that all the PCs are connected to both connected to the router. I could not transfer even the smallest file from the server to a PC without it timing out. I solved this by moving the domain controller to the switch so that the router is out of the loop. Now local traffic is back to full speed but internet traffic is still extremely slow.
Email, downloads of files and general browsing are all extremely slow. A speed test shows a ping of 8ms, download 0.57ms and upload of 3.18ms. The ping and upload are normal, the download is not. I've tried rebooting the router but that seems to make no difference. I'm on firmware version v1.1.1.06.
HELP!I have an internet connection that does 200mbps. My ISP has an internal speedtest (to guarantee that "nothing internet" comes in between and you are testing the "LAN" connection). With my laptop connected directly to the modem I get 185mbps. With my old router (100mbps port) I get 80mbps.
Hoping for awesome results - since I specifically bought it for its gigabit wan ports - I ran the test again with the RV325 in between. The download speed stalled at 25mbps! (So for clarity: 1/8th of the max speed and 3 times slower than my previous router).
In bandwidth management I've changed both up and downstream numbers to 1.000.000 (it won't go higher) and I do not have any rules. This does not help a bit.
The port is connected @ 1gbps to my modem, my laptop is connected @ 1gbps to the router and I'm running firmware 1.1.1.06
I really hope there is something I missed here, because I'm greatly disappointed so far. -
Mac Pro has slowed to a crawl - Please Help Me!
Hello,
For some time now my Wireless or Wired Internet connection using my Mac Pro has slowed to almost nothing. For example, This page took 5 mins to load and now Internet use has become unusable.
I feel its my Mac Pro because all other Apple Computer run very fast wirelessly. I have (2) New iMac's (1) Apple TV and (1) Apple iPhone. All stream and surf the Internet blazingly fast.
My Mac Pro is constantly being redirected to other sites (mostly **** related) and a huge amount of Pop ups (even though pop ads are disabled in Safari). All Internet browsers perform the same on my Mac Pro or ANYTHING Internet related including WoW, Software updates or even iTunes Music Down loads.
I really feel that in some way (which is shocking) I am infected with "something" that is making my computer crawl on the Internet. Redirection of websites is just now very aggravating.
I am looking at the (2) Original Disks that came inside the Mac Pro Box. I'm seriously considering wiping my system clean and starting from scratch.
I currently hold NOTHING on my Factory 320GB HD other than programs.
I have installed (2) 1TB drives and created a RAID slice thus creating a single HD icon on my desktop that reads 1.8TB. Thats is where all my Music, Photos, and Movies reside.
My question is....
When I wipe my system will that RAID be broken? Will I lose everything on those 2 drives or will using the restore CD's leave all that information in tact?
Please let me know before I proceed.
Thank you for your time.
JohnYour RAID won't be touched. But back it up today if you haven't yet!
I use Firefox for security with noscript and some other filters, but I also hardened the router firewall to manually block services, ports and add rules - both incoming and outgoing.
You might want to look at LittleSnitch or NetBarrier and do some logging.
I've seen/heard where older routers and modems were fine, but not with Mac Pro or with Intel Macs in general and needed to be replaced or firmware updated. Problems with the latest updates for Airport have been seen by some, and worth checking into - on forums, news sites or hit google.
And of course check what processes are getting loaded and run; manually delete caches, history, metadata, even the bookmarks cache.
~/Library/Caches/Metadata
There are issues with fake Flash updates; normal sites (like CNN) suffering from SQL-injection. Best to run with javascript off for now.
Might want to look into ClamXav and other malware protection. But I would switch and see how Firefox and Opera behave. And turn off java, script, and plug-ins while you consider your options and try to find out why. -
Please appreciate the details, so the complete situation can be visualized:
The office network:
New Mac Mini PC running Win 7Pro 64, (in boot camp), networked to an iMac running the same Win 7 Pro 64, VM, UNDER Fusion 7Pro.
To review: My treatment rooms former dell PC/running vista business/ running the server and network versions of my Dental practice mgmt & X-ray capture apps, had no probs WLAN to the front desk iMac running the same PC client dental network apps under the same vista business, & Fusion 4. The dell slowly fried its power supply .
I could not wait to replace it with a Mac mini/ boot camp/ win7 pro 64 bit, as it has to run natively to capture X-rays. The front desk iMac was also upgraded to os10.10.3/ Fusion 7pro/ and its own matching Win7 pro 64bit. The iMac is wired and WLAN connected to a netgear d600 router and a Time Warner Cable modem. The modem then failed and was replaced by an arris modem. As the Arris was configured out of the box, the network ran much slower slowed, as compared to the original modem. BUT- The Vonage 2 line phone system stopped working- no incoming or outgoing voices could be heard after it rang. Then twc remote configured it and the phone now works, but the network iMac slowed to a crawl, and now freezes when accessing the Mac Mini PC dental server to edit or enter data. The Mini perfectly accesses the internet via wifi. It accesses the front desk canon printer by wifi, and can print share they the iMac that is wired to the printer, as well, BUT, the network connection is a spinning pinwheel. The front desk imac easily finds the Mac Mini PC server on the network. It connects easily by entering the servers IPv4 address SHOULD THAT last value change. But if data isn't entered in slow motion, the window and app freezes, and has to be force quit by Task Manager!
Cause:
1. I think TWC switched the cable modem from the default- Non Bridged, to Bridged mode. Could this be the cause?
2. The network setting in fusion, on the iMac is auto detect, a setting that always worked with vista and with the new Win7 system, before TWC installed the new arris modem. 3. Switching to NAT does not work at all is there a different setting to use?
3. Does the Netgear Router have to have a port or pref configured so as not to block the Server.
4. might in need an Access Point (I have an extra netgear wdr3400) ).
5. Do I need an Extender that plugs into the AC LINE?
I hope this info helps.
PS:(some addtl info:
1. File sharing works fine between the minis -Mac and boot camp sides and between the iMacs- Mac and VM sides and between eother side to or from either of the 2 computers! 2. Also either office computer and all of my my home macs , (& my iPad, & iPhone), can access each other instantly and flawlessly, with splash top streamer and jump desktop remote apps, as controller or as client! In fact, the front desk iMac can remote control the mini PC AS IF YOU WERE DIRECTLY ENTERING INFO I TO IT!
SO I think it's either a misconfiguration in the TWC cable modem &/or some additional pref to config in the router? Thanks so much for your help, (been using VM's since VPC1. & Win95 in a iMac, 1999, DV MODEL! (TWC BLAMES VONAGE FOR NOT OPENING SOME PORTS IN THE TELE MODEM. Vonage blames TWC FOR NOTopeningj ITS PORTS IN THE CABLE MODEM, when they meant the ports on the Netgear. They have passed the buck for 6 weeks with not even a guess at what to do. VERY FRUSTRATING! Again, thanks to all!Okay Saint Steven, I'll bite:
I read your description multiple times, very carefully, and I am still confused. May I suggest the following:
* Follow basic troubleshooting procedures. Isolate each individual problem. Don't try to get everything working at once. Make one change at a time.
* If I read your description correctly, the Netgear D600 (??) Router is the office LAN (not WLAN). Connect each piece on the LAN separately one-by-one, and test each piece individually. Get your LAN and its devices working first. Forget about the Vonage and the Arris Cable modem.
* Next, look at your Internet connection. Again, try each piece separately. Depending on how the original cable modem and the new Arris cable modem are configured, you may also have to adjust the configuration of the Netgear D600 Router.
* Finally, if you are still having problems, try to organize your thoughts and presentation before you post again. List each element in your network. List how each element is configured. Be systematic.
"Arris cable modem" does not help much - some are simple bridges, others are routers, etc.
To answer your questions:
1. I can't tell from your confusing description, but I don't think so. It seems like the problems are associated with the system changes you made (replacing Dell, etc.) and the problems seem to be isolated to the local LAN.
2. Auto detect should work, but it is easy to change and test, as long as you change one thing at a time.
3. No. The Netgear router should allow all communications on the local LAN. Could you have put the "server" in the DMZ?
Note: I could not find a Netgear "D600" model in a web search. Do you mean N600?
4. No. I doubt that you need an additional access point. Based on your description, everything appears to connect to the LAN.
5. No. See 4.
To repeat myself:
* Do careful, systematic troubleshooting.
* Provide carefully written, detailed description of your network and system configurations when you ask for help.
Good luck! -
Premiere has slowed to a crawl. Please Help
Hi, I am a photographer and video editor. I built my computer about 15 months ago to work with CS5 and the Mecury Playback Engine. In the past few months it has been slowing down at an alarming rate. Over the holidays I created a video montage of pictures from my brother's wedding and Premiere kept stopping with an error that read something like 'Open GL driver failed' adding something about 'lack of memory'. I had to switch to software mode and avoid playing the timeline (to avoid rendering each photo, there were well over 100) so I could finish it in time. And now a project I am getting paid for will no longer play back smoothly. I get about 1 second of smooth video before it starts jumping and freezing all together. The audio continues but the picture does not. Here's what I have.
Intel Core i7 950 (quad core) 3.07GHz
12.0 GB Ram
Windows 7 Pro 64bit SP1 fully updated
Nvidia GTX 470 w/ 1280 MB GDDR5
current driver. 285.62
C: 60GB SSD for system and programs 4.64GB free
E: 300GB 10000 rpm 16MB cache VeliciRaptor Drive for Project files preview files/scratch disks and such 134GB free
G: 1TB 7200 rpm 32MB cache Barracuda Drive for Assets 158GB Free
I have 2 other drives but they are not used in this workflow.
Page file = 36859MB automatically managed on drives C:, E:, and G:
My Power Usage plan is set to High Performance.
I am editing in Premiere Pro CS5.5.2 (003 (MC: 258762))
The programs I have running in the background are: Realtek HD Audio Manager, NVIDIA Settings, Zone Alarm (security), Dropbox 1.1.45, Spyder3Utility, and as of today Spybot.
The Project is a short 10-12 min Documentary type video. It's mostly interview footage with various B-roll interspersed. The main timeline I use is 4 video and 4 audio layers. The fourth layer in both is turned off to holding stuff. There is not much in them. Layer 1 is pieces of another timeline. That timeline consists of 2 layers of interview footage from 2 angles with a third audio track from the zoom recorder all synced and color corrected. I adjust opacity here to pick which camera angle to use, but cut this timeline together in my main timeline to minimize sync problems and added color correction steps. In the main timeline, video layers 2 and 3 are B-roll. audio layers 2 and 3 include one short sound effect and a few pieces of music. Some of the music has been slowed or sped up to fit the timing needed. Premiere quickly renders that sound when I start up the project or make changes to those files in the timeline.
All audio is either MP3 or WAV files.
Most of the video is Canon DSLR footage (5D mkII, 7D, and 60D I believe). All 1920x1080 30p (a couple 24p by accident) there are some Jpegs, TIFFs, and one PNG file. Many of the pictures are housed in sub timelines with 2 layers. one with a moving picture and the other with a Gaussian blurred version in the background to fill the frame. There are some timelapeses that are of various sizes but nothing smaller than full HD. 2 are MP4 videos and the rest are quicktime.
All my timelines are preset for DSLR footage at 1920x1080 30fps.
Almost the entirety of my timeline has the little yellow line over it indicating that we should be hardware rendering this footage.
A few things about how I have worked with this computer. I built it for CS5. When I first started using it, it was brilliant. Lately The whole computer has slowed, a lot. last week I uninstalled some extraneous programs and tweaked somethings. Most everything on the computer is now running back up to snuff. Premiere is not. It is too the point that I cannot edit and a new edit of the project is due this Friday. When I first started using this computer I got some noise from the GPU and CPU fans when I would load up a heavy duty project. That made sense it was making the computer work. Now I get almost no noise from either fan and the thing runs like crap when I am editing. This doesn't make sense to me. Has something changed with an update of Premiere that changes the way it leverages the hardware, cause I doesn't seem to be doing that at all. Or might I have unknowingly flipped a switch somewhere that changed that leverage. In the Project Settings the Video Rendering and Playback is still set to Mercury Playback Engine GPU Accelerated. On the same line I have noticed much less fan noise when rendering with Media Encoder. I can't say I've seen a huge hit in performance there, but it doesn't seem to be taxing the GPU like it used to.
Please help if you can. I don't have time in my life to start the computer over with a fresh install on windows. Thanks so much.
MichaelI see nobody has suggested you delete your preferences. I do that whenever any app, not just Pr, starts acting strangely. I think with Pr on Windows you launch with the shift key held down. If that's wrong, somebody please correct me. I use a program on Mac called Preference Manager to keep good copies of preferences, because they get corrupted so easily on FCP especially, and also Ae.
Here's another general rule I employ, when Pr (or any NLE) starts behaving badly. It could be you have some corrupt media, which will cause your app to hang or quit, which you haven't described, but I suppose it could just bog things down.
Load a totally different project with totally different media. Does Pr work fine now? If so, your problem project may be corrupted, or it may contain corrupt media.
Make four copies of your sequence. Delete all but the first 1/4 of your sequence in the first copy. Now, does Pr work better? If so, great! You've just determined the issue is in the last 3/4 of your sequence.
Now, delete the first quarter, and last half from the second copy. And so on. Repeat this until you've found the section that causes your problem. Then subdivide that section until you've isolated the problem footage. Remove or replace that footage item with a non-corrupt version. Or, learn to live without it, or try transcoding it to another format, etc.
You also mentioned that you're using Nested Sequences, right? These have been a problem for me in a few projects, mostly with exporting, but worth a shot maybe: Render out the nested sequences to a lightly or uncompressed codec, and replace the nested sequences with the rendered file.
This is a long shot, but hey, you've got to start using the process of elimination to get to the root of your problem.
If Pr works lousy no matter what project or footage you load, that suggests there's something wrong with the install of Pr, or some other OS, virus, hardware or driver related issue.
I'm throwing a lot of ideas out there, and here are some more:
Open your Task Manager, and rig it so you can see the CPU performance. Are your meters clipping, or running at full bore? If so, your CPU may be having trouble keeping up with all the Long-GOP decoding you have going on.
Transcode your MP3 to WAV, and replace in the Timeline.
Transcode your Long-GOP material to an intraframe codec, and replace. A lot of Windows users use Cineform.
I'm fixating on your remark that when you started, things were "brilliant," but have since bogged down. That's why I was thinking VM, and also I can see how your continuously adding elements to the Sequence are slowly causing more challenges for the CPU and GPU.
I'm looking forward to your fixing this, and letting us know how you did it. -
10.4.6 has slowed to a crawl - any suggestions
My dual 2ghz G5 has been working perfectly happily with 10.4.6. I have 2.5 gig of Ram installed and have had no real problems. However today it has slowed down to a crawl. It takes at least 15 to 30 seconds to switch from one application to another and the same time for the Finder to display the contents of a folder in list view. Actual apps also are very very slow - except sometimes Safari appears to work ok. My instinct is that the problem seems most acute with the Finder.
I have disconected all external devices. I have rebuilt the directory with DiskWarrior. I have run Power PC Hardware test 2.2.5 (no problems reported in the extended test). I have also run memtest (but it doesn't appear to recognise all the RAM installed). Still crawling along.
Any suggestions? This is driving me crazy - I can't use this properly as it is. As I said it had been working without problems.
Thanks for any help
Philip Flower
G5 dual 2ghz processor Mac OS X (10.4)Absolutely. AHT isn't a perfect test -- Apple authorized dealers and Apple Stores have a more powerful utility available -- but a "positive" from AHT is a strong sign that all is not well with the drive.
What makes it sloooow is probably the drive trying over and over to complete an operation. Disk Utility and DiskWarrior are telling you that the structure of your disk and catalog is OK, but neither are really reading and writing all over the disk.
Let's check the S.M.A.R.T. disk status. Open Disk Utility, and select the drive - not the volume. What message is displayed next to S.M.A.R.T?
This could be the drive, the cable, or the serial ATA bus connector. I suppose it could be power. By all means wiggle cables and see that everything is soundly connected, but you need to make or update a full backup and take it for service.
Good luck,
John -
My MacBookPro has slowed significantly. I have cleaned it with CleanMyMac2 but it did not help. I have cleaned iPhoto and emptied the trash.
Any suggestions are appreciated.
thanks,
jim,Thanks for the help....
stevejobsfan0123 wrote:
First off, uninstall CleanMyMac, it's a scam. http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Next, run EtreCheck, which will give us information about your system: http://etresoft.com/etrecheck.
Problem description:
MacBookPro running very slowly. Three minutes to open Safari. Four to open iPhoto.
EtreCheck version: 2.0.9 (96)
Report generated October 31, 2014 at 9:11:03 PM CDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 4:25:31
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Dummy (disk1) / [Startup]: 318.84 GB (210.08 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Canon MP620 series
Generic Mass Storage 4.03 GB
S.M.A.R.T. Status: Verified
IPHOTO (disk2s1) /Volumes/IPHOTO : 4.03 GB (3.84 GB free)
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items: ℹ️
Canon IJ Network Scanner Selector2 Application (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Safari ApplicationHidden (/Applications/Safari.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Mathematica: Version: 9.0.1.4092152 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
Omnibar
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Dummy: Disk size: 318.84 GB Disk used: 108.76 GB
Destinations:
BackUp [Local]
Total size: 319.94 GB
Total number of backups: 3
Oldest backup: 2014-09-11 14:40:53 +0000
Last backup: 2014-10-15 17:08:07 +0000
Size of backup disk: Too small
Backup size 319.94 GB < (Disk used 108.76 GB X 3)
Top Processes by CPU: ℹ️
8% mds
6% WindowServer
0% AppleSpell
0% ps
0% askpermissiond
Top Processes by Memory: ℹ️
588 MB com.apple.WebKit.WebContent
133 MB Safari
69 MB Preview
56 MB CalendarAgent
56 MB WindowServer
Virtual Memory Information: ℹ️
73 MB Free RAM
1.28 GB Active RAM
1.21 GB Inactive RAM
1.03 GB Wired RAM
2.63 GB Page-ins
26 MB Page-outs -
Have installed 10.10 on my iMac (mid 2007) 2.4 GHz 2Gb memory which has slowed to a crawl
have installed 10.10 on my iMac (mid 2007) 2.4 GHz me 2 GB which has slowed to a crawl
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
File copying has slowed to a crawl.
When I try to copy from my home directory to an external hard drive, (about 600mb of data in this instance), it starts to copy in the normal way, saying about a minute remaining, then suddenly stops...
... and waits, while "time remaining" increases.
A short while ago it got as far as saying 40 minutes!! For 600mb!!
I tried to launch my browser while this was happening & it was having none of it.
I tried to launch the "force quit applications" window. Again nothing.
Then I stopped it copying & the other things opened.
It's as if "copying" suddenly asks for more power than the computer can supply & everything else takes a back seat. The copying begins, but at an absolute snail's pace.
If I left if for 40 minutes it would probably copy successfully, but why so slow?
I have about 30GB of data I need to remove from my hard drive before I can do a clean install, but at this speed I don't think I'm going to live long enough!
I've run permissions checks & repairs on all drives concerned. I've run TechTools Pro diagnostics on everything & it's checking out fine.
So what could be the problem?My problem turned out to be much more extensive than I'd originally realised.
My laptop had a faulty hard drive that needed replacing & the external hard drive seems to have developed a fault whereby it works fine for a while & then slows to a crawl, taking the machine with it. (ie Everything "finder" related seems to slow to a crawl.)
The external hard drive seems to behave itself if it's the only thing on the firewire chain.
Alternatively, if I have the dodgy drive on its own on the Firewire 400 socket & my other external hard drives chained off the Firewire 800 socket the dodgy drive behaves itself.
As soon as I try to copy from one external to the dodgy one it starts to play up, but as long as I just read data from it it's fine.
So I'll get the data off it & stop using it.
I hope your problems are not as extensive. -
Apache Help! Computer has slowed to a crawl & no net access
After following tutorials: firstly here, and secondly here, my laptop has slowed to an excruciating crawl, when the machine boots it asks for my username and password when the Sys Prefs are set to auto log in. It also can't access the net anymore.
It was able to utilize PHP files located in the /Library/WebServer/Documents (http://localhost/page.php), but when trying to use http://dev/sitename it would fail and I received an error on line 2 upon execution of "sudo apachectl configtest" when no typos were present.
I've tried putting everything back the way it was originally but have had no luck.
Any ideas? I'm dyin' here.......Follow up: Was never able to fix the mysterious issue. I did an "Archive and Install" and that seems to have fixed the problem.
-
Folks - help!
Have the E4200v2 router. Suddenly my wireless devices have slowed to a crawl. I mean slow. My Cisco Connect confirms that my wired download speed is 30-32 GB, but my two Android devices have slowed to ~500k. I might have changed something - just don't know. I know I'm desperate though.
I do have the latest firmware (2.0.37). HELP! How do I maximize speed form this thing?
Thanks so much in advance!make sure 5ghz setting is different from 2.4 ghz .. Firmware should be updated . change channel to 9,6,3,1
I believe that I can make it -
IMac running slow and frequently crashing since installing Mavericks. Any useful info in this log?
Since installing Mavericks some time ago, applications have become slow to open, proccesses have slowed and, well, eveything has slowed down some. Also, almost every day, sometimes more than once, the iMac will freeze for a second, then reboot itself. I've tried searching for similar posts but haven't found an answer yet. I did open the console (which, I confess, I don't understand) and I'm getting lots of messages. But, as I've never checked before, I have no idea whether any of them are normal. Here's a small section:
3/9/14 1:26:45.057 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[828]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:26:45.066 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:26:55.140 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[829]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:26:55.150 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:27:05.151 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[830]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:27:05.160 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:27:06.000 PM kernel[0]: considerRebuildOfPrelinkedKernel prebuild rebuild has expired
3/9/14 1:27:14.840 PM secd[245]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:27:14.840 PM secd[245]: securityd_xpc_dictionary_handler com.apple.sbd[833] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:27:15.161 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[835]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:27:15.171 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:27:25.171 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[836]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:27:25.187 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:27:25.892 PM secd[245]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:27:25.892 PM secd[245]: securityd_xpc_dictionary_handler com.apple.sbd[833] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:27:25.919 PM secd[245]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:27:25.919 PM secd[245]: securityd_xpc_dictionary_handler com.apple.sbd[833] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:27:35.188 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[837]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:27:35.202 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:27:45.203 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[838]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:27:45.212 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:27:55.212 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[839]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:27:55.222 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:28:05.223 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[842]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:28:05.233 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:28:15.233 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[843]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:28:15.243 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:28:25.311 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[844]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:28:25.323 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:28:35.397 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[845]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:28:35.407 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:28:36.599 PM secd[245]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:28:36.599 PM secd[245]: securityd_xpc_dictionary_handler com.apple.sbd[833] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:28:45.408 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[846]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:28:45.418 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:28:55.419 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[847]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:28:55.429 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:29:05.505 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[848]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:29:05.515 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:29:15.515 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[849]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:29:15.525 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:29:25.596 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[850]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:29:25.606 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:29:35.607 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[851]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:29:35.617 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:29:45.686 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[852]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:29:45.696 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:29:55.766 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[853]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:29:55.776 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:30:05.849 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[855]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:30:05.858 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:30:15.933 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[856]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:30:15.943 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:30:25.944 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[857]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:30:25.954 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:30:35.954 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[858]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:30:35.965 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:30:45.884 PM secd[245]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:30:45.884 PM secd[245]: securityd_xpc_dictionary_handler com.apple.sbd[833] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:30:45.904 PM secd[245]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:30:45.905 PM secd[245]: securityd_xpc_dictionary_handler com.apple.sbd[833] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
3/9/14 1:30:45.966 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[862]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:30:45.975 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:30:55.976 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[863]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:30:55.987 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:31:04.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=864[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
3/9/14 1:31:04.454 PM GoogleSoftwareUpdateDaemon[865]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
3/9/14 1:31:04.466 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
3/9/14 1:31:04.483 PM GoogleSoftwareUpdateDaemon[865]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
3/9/14 1:31:04.490 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x34c960
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x34cc50 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2013-03-25 17:44:15
>
Using server: <KSOmahaServer:0x250530
engine=<KSDaemonUpdateEngine:0x247550>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Keystone" = {
LastActiveDate = 2014-03-09 20:31:04 +0000;
LastActivePingDate = 2014-03-09 08:00:00 +0000;
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
"com.Google.GoogleEarthPlugin.intel" = {
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
"com.google.nikcollection" = {
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
"com.google.Chrome" = {
LastActiveDate = 2013-06-16 20:50:59 +0000;
LastActivePingDate = 2013-06-17 07:00:00 +0000;
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.9.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
3/9/14 1:31:04.523 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x256530
server=<KSOmahaServer:0x250530>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.9.2_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="349" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
3/9/14 1:31:05.275 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x256830
server=<KSOmahaServer:0x250530>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_days="2624" elapsed_seconds="45065"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
3/9/14 1:31:05.325 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
3/9/14 1:31:05.328 PM GoogleSoftwareUpdateDaemon[865]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
3/9/14 1:31:05.330 PM GoogleSoftwareUpdateDaemon[865]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
3/9/14 1:31:05.331 PM GoogleSoftwareUpdateDaemon[865]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
3/9/14 1:31:05.333 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
3/9/14 1:31:05.600 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
3/9/14 1:31:05.603 PM GoogleSoftwareUpdateDaemon[865]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
3/9/14 1:31:05.609 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x2570e0
productID=com.google.nikcollection
version=1.1.1.1
xc=<KSPathExistenceChecker:0x2597c0 path=/Applications/Nik Collection>
url=https://tools.google.com/service/update2
creationDate=2013-03-25 17:44:17
>,
<KSTicket:0x24c640
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x259a60 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2013-03-25 17:44:15
>
Using server: <KSOmahaServer:0x25aec0
engine=<KSDaemonUpdateEngine:0x247550>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Keystone" = {
LastActiveDate = 2014-03-09 20:31:04 +0000;
LastActivePingDate = 2014-03-09 08:00:00 +0000;
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
"com.Google.GoogleEarthPlugin.intel" = {
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
"com.google.nikcollection" = {
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
"com.google.Chrome" = {
LastActiveDate = 2013-06-16 20:50:59 +0000;
LastActivePingDate = 2013-06-17 07:00:00 +0000;
LastRollCallPingDate = 2014-03-09 08:00:00 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.9.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
3/9/14 1:31:05.610 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x351510
server=<KSOmahaServer:0x25aec0>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.9.2_i486"></o:os>
<o:app appid="com.google.nikcollection" version="1.1.1.1" lang="en-us" installage="349" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="349" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
3/9/14 1:31:05.987 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[870]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:31:05.997 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:31:06.174 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x3508d0
server=<KSOmahaServer:0x25aec0>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_days="2624" elapsed_seconds="45066"></daystart>
<app appid="com.google.nikcollection" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
3/9/14 1:31:06.179 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
3/9/14 1:31:06.184 PM GoogleSoftwareUpdateDaemon[865]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
3/9/14 1:31:06.184 PM GoogleSoftwareUpdateDaemon[865]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
3/9/14 1:31:06.185 PM GoogleSoftwareUpdateDaemon[865]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
3/9/14 1:31:06.187 PM GoogleSoftwareUpdateDaemon[865]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
3/9/14 1:31:08.711 PM GoogleSoftwareUpdateDaemon[865]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
3/9/14 1:31:15.999 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[872]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:31:16.008 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:31:26.009 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[873]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:31:26.019 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:31:34.456 PM GoogleSoftwareUpdateDaemon[865]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
3/9/14 1:31:36.019 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[874]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:31:36.030 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:31:46.031 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[875]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:31:46.041 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:31:56.041 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[877]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:31:56.060 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:32:06.060 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[881]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:32:06.070 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
3/9/14 1:32:16.071 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist[882]) assertion failed: 13C64: launchd + 105965 [425516B6-9F3E-342F-87B3-EC461EBA6A1A]: 0xd
3/9/14 1:32:16.081 PM com.apple.launchd.peruser.503[165]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
I also read that I should run EtreCheck to help you see... something. So here's that too:
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.33 GHz Intel Core 2 Duo CPU: 2 cores
16 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:45:24
Disk Information:
WDC WD1001FALS-40U9B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Mac HD (disk0s2) / [Startup]: 999.35 GB (606.34 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GA11N
USB Information:
Apple Internal Memory Card Reader 31.91 GB
NIKON D600 (disk2s1) /Volumes/NIKON D600: 31.91 GB (108.7 MB free)
Western Digital My Book 1140 4 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
4TB Backup drive (disk1s2) /Volumes/4TB Backup drive: 4 TB (300.86 GB free)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Startup Items:
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.intego.commonservices.daemon.plist 3rd-Party support link
[System] com.intego.commonservices.icalserver.plist 3rd-Party support link
[System] com.intego.netupdate.daemon.plist 3rd-Party support link
[System] com.intego.task.manager.daemon.plist 3rd-Party support link
[System] com.intego.VirusBarrierX6.daemon.plist 3rd-Party support link
[System] com.intego.VirusBarrierX6.scanner.daemon.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.CS4ServiceManager.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.intego.commonservices.statusitem.plist 3rd-Party support link
[System] com.intego.netupdate.agent.plist 3rd-Party support link
[System] com.intego.task.manager.notifier.plist 3rd-Party support link
[System] com.intego.VirusBarrierX6.alert.plist 3rd-Party support link
[System] com.intego.VirusBarrierX6.statusitem.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.sony.PMBPortable.AutoRun.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.akamai.client.plist 3rd-Party support link
[not loaded] com.akamai.single-user-client.plist 3rd-Party support link
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.aunsoft.LaunchFinalMate.plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
iTunesHelper
Safari
iTunes
Internet Plug-ins:
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
Flip4Mac WMV Plugin: Version: 2.3.4.1 3rd-Party support link
Silverlight: Version: 4.0.50401.0 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
DivXBrowserPlugin: Version: 2.0 3rd-Party support link
Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
GarminGpsControl: Version: 3.0.1.0 Release - SDK 10.4 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
Akamai NetSession Preferences 3rd-Party support link
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Java 3rd-Party support link
Old Applications:
Garmin Map Update: Version: 4.3.1 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/Garmin/Garmin Map Update/tmp/Garmin Map Update.app
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
Photomatix Pro 5: Version: 5.0 - SDK 10.5 3rd-Party support link
Accessport Manager: Version: 1.0 - SDK 10.5 3rd-Party support link
dynamiclinkmediaserver: Version: 6.0.1 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Mac HD: Disk size: 930.71 GB Disk used: 366.02 GB
Destinations:
Time Machine disk [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 18
Oldest backup: 2012-06-13 20:32:48 +0000
Last backup: 2014-02-28 20:11:48 +0000
Size of backup disk: Too small
Backup size 931.19 GB < (Disk used 366.02 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% PluginProcess
1% iTunes
1% Adobe Photoshop CS6
1% EtreCheck
Top Processes by Memory:
2.27 GB Adobe Photoshop CS6
410 MB Safari
295 MB Adobe Bridge CS6
147 MB mds_stores
134 MB com.apple.WebKit.WebContent
Virtual Memory Information:
2.32 GB Free RAM
6.65 GB Active RAM
6.07 GB Inactive RAM
987 MB Wired RAM
405 MB Page-ins
0 B Page-outs
Thanks in advance for anyone's insight!Ok, so I think I got rid of everything you suggested, Arthur. No real improvement in speed, but the computer's four and a half years old, so... I should just be satisfied if it doesn't crash every day. That would be an improvement. I'll have to wait a few days to see. I've run Etrecheck again just incase you see something else that might help. Thanks.
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.33 GHz Intel Core 2 Duo CPU: 2 cores
16 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:13:54
Disk Information:
WDC WD1001FALS-40U9B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Mac HD (disk0s2) / [Startup]: 999.35 GB (589.99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GA11N
USB Information:
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Western Digital My Book 1140 4 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
4TB Backup drive (disk1s2) /Volumes/4TB Backup drive: 4 TB (213.22 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.CS4ServiceManager.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.sony.PMBPortable.AutoRun.plist 3rd-Party support link
User Login Items:
iTunesHelper
Safari
iTunes
Internet Plug-ins:
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
Flip4Mac WMV Plugin: Version: 2.3.4.1 3rd-Party support link
Silverlight: Version: 4.0.50401.0 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
DivXBrowserPlugin: Version: 2.0 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
GarminGpsControl: Version: 3.0.1.0 Release - SDK 10.4 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Java 3rd-Party support link
Old Applications:
Garmin Map Update: Version: 4.3.1 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/Garmin/Garmin Map Update/tmp/Garmin Map Update.app
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
Photomatix Pro 5: Version: 5.0 - SDK 10.5 3rd-Party support link
Accessport Manager: Version: 1.0 - SDK 10.5 3rd-Party support link
dynamiclinkmediaserver: Version: 6.0.1 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Mac HD: Disk size: 930.71 GB Disk used: 381.24 GB
Destinations:
Time Machine disk [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 20
Oldest backup: 2012-06-13 20:32:48 +0000
Last backup: 2014-03-14 00:44:01 +0000
Size of backup disk: Too small
Backup size 931.19 GB < (Disk used 381.24 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
1% WindowServer
1% EtreCheck
1% iTunes
0% coreaudiod
0% Adobe Photoshop CS6
Top Processes by Memory:
393 MB Adobe Photoshop CS6
180 MB Safari
147 MB mds_stores
131 MB iTunes
115 MB Adobe Bridge CS6
Virtual Memory Information:
12.31 GB Free RAM
2.20 GB Active RAM
338 MB Inactive RAM
1.16 GB Wired RAM
379 MB Page-ins
0 B Page-outs -
My PC was running fine before 4.0, and since then it is as described above. Almost thought this was a virus masquerading as a legit update (has happened to me before). Will there be an update to fix all the problems that have been reported, or do I have to bring in the Geek Squad to replace Firefox with Explorer?
My PC was running fine before 4.0, and since then it is as described above. Almost thought this was a virus masquerading as a legit update (has happened to me before). Will there be an update to fix all the problems that have been reported, or do I have to bring in the Geek Squad to replace Firefox with Explorer?
Maybe you are looking for
-
Syntax Error while adding TrustedHosts
I have a machine that has Windows Server 2012 R2 installed on it. I just installed RSAT on my ThinkPad Tablet which runs Windows 8.1. I'm trying to add my server in the client's trusted host list with - winrm set winrm/config/client @{TrustedHosts="M
-
my iphone I fell to the ground yesterday, from a height of approximately 1 meter. after this I trailed off, now only turns on when I plug the usb but the apple appears and just turn off and turn back, there is nothing more that I recommend doing?
-
New player freezes with Linux+Firefox+Firebug.
Any page (or tab) playing a flash video (youtube for example) freezes firefox when closed when firebug is loaded as a module. This only applies to flash video's being played and intermittently fails to crash. This message is cross posted to the bug r
-
Why do Analysis VIs need the full path to lvanlys.dll?
I've noticed that all Analysis VIs contain the full pathname of the lvanlys.dll that is being called. This means that the .lvproj file lists this fully qualified DLL filename as a dependency of the project. This turns out to be an issue if the same
-
Compounding characteristic need to be created
Hello All, We are extracting Employee name from 3 R/3 systems to our BW system. There is a possibilty that employee numbers (IDs) may overlap between different source systems. For that i am thinking to create 0SOURCE SYSTEM as compound attribute for