Processing type as SAP Exit with Variable 0F_ADAY

Hi Experts,
We are using the formula variable in our report as caluculated key figure. I have edited the CKF and drill down the formula node to check the processing type of it and found as SAP Exit and the variable name is 0F_ADAY. How can i navigate to get in to the SAP Exit code. Any help will be appreciated.
Thanks and Regards,
Venkat

Hi Venkat,
Go to the function module "RSVAREXIT" (T.Code - SE37) and check for you variable (0F_DAY)there. From there u can check the code corresponding to that variable;
Regards
Prasad;

Similar Messages

Behaviour of SAP-exit feeded variables in variants of Broadcaster

Hi folks,
We would like to use the SAP exit feeded variable 0CMONTH (reference charateristic: 0CALMONTH) for broadcasting functionalities, based on a query.
0CMONTH itself has SAP-default setting under details' property "Variable is Ready for Input", flag active set.
If we select such query for broadcasting functions, creating some variants with characteristic variable 0CMONTH, how would these variants behave after the current month will change, changing to the next month?
Example for 0CMONTH:
Now: July 2008, 07.2008
Next month: August 2008, 08.2008
Would the initial created and saved broadcaster variants also change the month-setting as it would do in the BEx area?
Or must the user change these variants each month again?
Any reply is much appreciated.
Regards
Chäsitzer

Thanks a lot Uday,
now my enquiry changes a bit:
How does the Broadcaster and its designed variants behave in the case of non SAP-exit variables with property setting "Variable is Ready for Input", flag active set?
Thanks for any replies.
Chäsitzer
Edited by: Chäsitzer on Jul 23, 2008 9:37 AM

Client Copy Error - ERROR: Type 'F' user exit with SYS_ERROR:

Hello,
We want to create a client copy from client 001 to clien 715.
The client copy test runs successfully.
The following error occurs in normal mode of client copy.
1 ETA028XClient copy from "03.11.2010" "17:12:43"
1 ETA029 System ID............................ "IS3"
1 ETA043 Target client........................ "715"
1 ETA030 R/3 Release.......................... "701"
1 ETA354   Basis Support Package..............."SAPKB70107"
1 ETA031 Host................................. "xxx"
1 ETA000 Start in background............. ....." "
1 ETA032 User................................. "SAP*"
1 ETA033 Parameter
1 ETA034 Source client........................ "001"
1 ETA188 Source client user masters............"001"
1 ETA185 Copier profile:......................."SAP_ALL"
1 ETA036 Table selection
1 ETA177 Customizing data ....................."X"
1 ETA037 With application data................ "X"
1 ETA155 Initialize and recreate......... "X"
1 ETA294 Change documents are not copied
2 ETA367XStart analysis of system "17:12:43"
3 ETA108 "/GC1/CC_EXIT_CLIENT_DELETION" executed "        0"("        0") entries copied
4 ETA114 Runtime "             0" seconds
3 ETA072 Exit program "/GC1/CC_EXIT_CLIENT_DELETION" successfully executed "17:12:53"
A2EE/SAPAPO/OM 012 "Mandant 715:" "Verbindung nicht oder fehlerhaft gepflegt:" "IS3CLNT001" " "
2 ETA102 ERROR: Type 'F' user exit with SYS_ERROR: "/SAPAPO/OM_CLNT_COPY_DOWNLOAD"
2 ETA534 "RCOD:" " 8" "SY-SUBRC:" " 0"
2 ETA191 Program ended abnormally
Can you help me?
thx
Torsten

Torsten,
Are you doing a local client copy in a SCM System. I can see it fails & is looking for SCM specific fn modules & user exits.
If yes, has a look at this notes there are some steps that needs to be done for the transactional date:
894490 - Client copy: Transactional data
And re-post it in the SCM forum: SAP Advanced Planning & Optimization (SAP APO)
- Regards, Dibya

Processing type as customer exit

is it useful in real time
if it is,
how to work with this.

hi Basha,
see this link
http://help.sap.com/saphelp_sem60/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Best regards
vijju

To use a Sap Exit variable in a diferent infoobject of the same type

Hi gurus,
I have the Sap Exit standard variable 0P_KEYDT in the infoobject Posting Date (0PSTG_DATE), and i need use this variable with the Document Date (0DOC_DATE), but i don´t have it in the infoobject. Both infoobjects are referenced by 0DATE.
Are there some way to copy the variable from one infoobject to other, or i need make my own exit?
Thanks in advance and regards.

If both of them are the same type means they are referring to 0DATE, then you should be able to access the standard variable defined. What you need to do is, delete the variable and recreate it, but when you recreate the variable don't refer to a characteristic 0PSTG_DATE but refer to date object so that it will be available to all date types.
I will tell you the side effect of doing this, changing the standard definition is always risky because if someone install the object again, then the change you made will be overwritten and hard to know what happened.
thanks.
Wond

Current Year Formula Variable with SAP-Exit

Hi Experts ,
Is there any SAP Exit Formula Variable avaliable that we can use in BEX which gives us the Current Calander Year?
I am able to find the current fiscal period ie "0F_CUFPE" which provides the current posting period/month.
On similar basis, I need a FV which provides me the Current Calender Year.
Please note that I do not need Characteristic Variables for Fiscal Year .
Regards
Dipali

Hi,
If you're refering to the InfoObject 0CALYEAR, there is an exit variable available called: 0CYEAR - Current Calendar year
Which will filter on the current year.
br
Mikael

Urgent: Issue with variable exit

Hi All,
We are having a requirement where in we need to populate the value of calday as the first day of the month that the user selects in the variable. For that, this is what i did:
1. Created a variable for 0CALDAY as ZDAT1 and made it as "Processing Type --> SAP exit"
2. Then i went to transaction SMOD and went to the enhancement RSR00001
3. And then went to the exit EXIT_SAPLRRS0_001 and wrote the logic for the requirement,in the INCLUDE ZXRSRU01.
4. Activated the include and exit
However, after that when i executed the query i got an error saying that the Exit RSVAREXIT_ZDAT1 for variable ZDAT1 either does not exists or is inactive. For this reason I went to se37 and found that RSVAREXIT_ZDAT1 exit was inactive (I didnot manually create RSVAREXIT_ZDAT1, guess it was system created), so i put my piece of coding in it with the mandatory import and export parameters.However, after that, the code was not getting called after the user enters the input, even if i put I_STEP =2. Can you please point out as to where i went wrong.
Best Regards,
Debashree.

Hi Debashree,
you should create the variable for processing type as 'customer exit' not SAP exit.
hope this helps.

Variables & Processing Types

Hi,
I am looking for variables & Processing types.Could any one guide me on Variables & Processing types in BI 7.0.
Thanks in advance!
Regards,
Vijji

Hi Vijji,
We have five types of variables in BI 7.0
1) Characteristic value variables
2) Text Variables
3) Hierarchy variables
4) Hierarchy node variables
5) Formula variables
we can pass the values to this variables using 5 processing types
1) Manual Entry/ Default value
2) Replacement path
3) Authorizations
4) Customer exits
5) SAP Exit
In the below link you can check which process type is varilable for which variable.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/579b3c494d8e15e10000000a114084/frameset.htm
Regards,
Venkatesh

With examples process types

please give process types with examples

hi raj,
Process types in SAP with typical examples
MTS----
Auto parts
MTO----
Motor cycles, pumps
Engineer to order----
Elevators
REM----
switches
Sales order based REM----
Personal computers
Mass production----
lighting producs, walkmans,i pods
PP-PI
1.chemicals----
Paints, solvents
2.Pharmacheuticals----
Tablets, medicines, syrups.
Retail----
Food, Cosmetics.
IS - Auto
IS - Oil
IS - Retail
IS - Mobile etc.,
E N J O Y SAP
MM Arunkumar.

ABAP coding for variable SAP exit

Hi,
I'm looking for a way to see the coding of a SAP-exit query variable: 0FYTLFP.
So this is NO custom-exit (via CMOD).
I've tried the FM: RSVAREXIT<varname> but it doesn't exist.
Via RSRT i couldn't find the piece of coding either.
I'm not looking for the functionality but the piece of coding that is used for this.
How can I find it??
Cheers.

Ok, this code works as per my note above. If the period of the system date is the first of the fiscal year, it will return to the previous fiscal year to get a range for YTD.
Basically, this acts as if you're running the query in the previous period for current YTD.
WHEN 'ZFYTLFP'.
        CLEAR: ZE_T_RANGE, E_T_RANGE, ZI_T_VAR_RANGE, W_YEAR, W_PERIOD, L_FPER.
        DATA: l_poper    LIKE t009b-poper.
        DATA: l_fiscyear LIKE t009b-bdatj.
        DATA: l_curdate LIKE sy-datum.
        l_curdate = SY-DATUM.
        CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
          EXPORTING
              i_date         = l_curdate
              i_periv        = i_periv
          IMPORTING
              e_buper        = l_poper
              e_gjahr        = l_fiscyear
          EXCEPTIONS
              input_false    = 1
              t009_notfound = 2
              t009b_notfound = 3
              OTHERS         = 4.
       W_YEAR = l_fiscyear(4).
        W_PERIOD = l_poper(3).
        IF W_PERIOD = '001'.
          W_YEAR = W_YEAR - 1.
          W_PERIOD = '012'.
        ELSE.
          W_PERIOD = W_PERIOD - 1.
        ENDIF.
        ZE_T_RANGE-LOW(4)   = W_YEAR." year
        ZE_T_RANGE-LOW+4(3) = '001'.
        ZE_T_RANGE-HIGH(4) = W_YEAR. " year
        ZE_T_RANGE-HIGH+4(3) = W_PERIOD.
        ZE_T_RANGE-SIGN = 'I'.
        ZE_T_RANGE-OPT = 'EQ'.
        APPEND ZE_T_RANGE TO E_T_RANGE.

SAP-Exit option not available in Query Designer

Hi,
I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
Regards,
Alexander

Hi, I think I didn't explain my problem right:
I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
Thanks,
Alex

Just cloned Prod to Test - adalnctl.sh: exiting with status 1

I just ran through my process to clone Prod to Test. I'm no expert but this has been done before without too many issues.
The problem I have now is when running adalnctl.sh start and I get 'adalnctl.sh: exiting with status 1'.
My configuration is 11.5.10 CU2 running in a two tier environment with forms and reports on the app tier.
Part of my process I follow is to submit some Concurrent Requests to clean-up old jobs. That's where I first noticed the job status showed as Phase=Inactive and Status=No Manager. If I check via the dashboard it shows CCM as running though.
So I decided to shut things down and restart and that where I noticed the 'apps listener' if that's the correct term as Failed.
I have run adpreclone on the Prod environment before backing up and restoring and then ran adprelcone in the Test environemt followed by adautocfg etc.
So I'll double-check to see if I've missed a step but just not sure where to start looking.
Looks like there should be a listener that tuns out of the 8.0.6 HOME?
I should mention this is on the db_tier which runs CCM and the apps_tier doesn't have this problem.
Example with the exact name edited:
Setting service OracleTNSListener80APPS_XXXX_xxxx to mode 2
Executing service control script:
/app/orafin/xxxx/xxxxcomn/admin/scripts/XXXX_xxxx/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version 115.17
Checking for FNDFS executable.
Starting listener process APPS_XXXX.
adalnctl.sh: exiting with status 1
.end std out.
.end err out.
- then later the logs shows:
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
OracleTNSListener80APPS_XXXX_xxxx adalnctl.sh Failed
OracleConcMgrXXXX_xxxx adcmctl.sh Started
OracleReportServer-Rep60_XXXX adrepctl.sh Started
Edited by: user6445925 on Sep 21, 2010 12:34 PM

Hi;
Thanks Helios. Can I move this post or is that just and fyi for next time.Its okey :)
I did as you say and now I get 'adalnctl.sh: exiting with status 127'.Pls source env file as apps user than stop and start lsnr by using adalnctl.sh, It will give you errors again than please check log file for exact error message,
You can find log file path on my blog:
http://heliosguneserol.wordpress.com/2010/04/13/log-file-location-for-oracle-e-business-suite-r12/
http://heliosguneserol.wordpress.com/2010/04/13/log-file-location-for-oracle-e-business-suite-r11/
I think I may redo this whole process tomorrow using a FULL backup from the tonight.If your db is up and apps service running i belive you dont need to take clone again
Regard
Helios

Unable to Start R12 Instance adstrtal.sh exiting with status 1

Hi - I am unable to restart my R12 server after successfully shutting it down.
1)
I seem to have the Database and Database Listener up with its respective scripts.
/d01/oracle/vis/db/tech_st/11.1.0/appsutil/scripts/VIS_oracle
su oravis
a) ./addbctl.sh start
b) ./addlnctl.sh start VIS_oracle
But I can't the application script to run.
2)
su applvis
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts
./adstrtal.sh applvis/applvis
adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstrtal.sh <appsusername/appspassword>
adstrtal.sh: exiting with status 1
Now, I verified that the applvis password is right because I changed under System --> Administration --> User Groups
The guide I followed mainly to setup my directory is the following:
http://eyeonapps.gendron.ca/?p=12
3)
Now, somewhere I read it could be with the Environment file not being sourced, but where is that file located, I saw a couple of locations, also under what user should I source it as?
Also, is there a way I can give all the users permission to the /d01 directory, to avoid problems like these.
Would appreciate the help to get the apps server running.
Thanks!

Hi Guys - I'm returning back to this thread I had, my server was shut down and then I restarted it after a long time.
Note, my Internet/Ip has changed, I had to change the IP in the adapter settings and the etc/host file from 192.160.1.101 to be 192.168.0.101, but I'm having a hard time opening the Login page. I can see the page that says:
"The E-Business Home Page is located at http://oracle.ebs:8000/OA_HTML/AppsLogin
If your browser doesn't automatically redirect to its new location, click here. "
But when I access the login page I get this error:
"Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, ohs_admin@ebs and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log."
This is the adstratal.log file:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
opmnctl: opmn started.
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /d01/oracle/vis/inst/apps/VIS_oracle/logs/appl/admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_VIS.
adalnctl.sh: exiting with status 0
adalnctl.sh: check the logfile /d01/oracle/vis/inst/apps/VIS_oracle/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts/adapcctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
================================================================================
opmn id=oracle.ebs:6200
no processes or applications matched this request
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /d01/oracle/vis/inst/apps/VIS_oracle/logs/appl/admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts/adoacorectl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 150
adoacorectl.sh: check the logfile /d01/oracle/vis/inst/apps/VIS_oracle/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts/adformsctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adformsctl.sh version 120.16
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 150
adformsctl.sh: check the logfile /d01/oracle/vis/inst/apps/VIS_oracle/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts/adoafmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 150
adoafmctl.sh: check the logfile /d01/oracle/vis/inst/apps/VIS_oracle/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts/adcmctl.sh start
Timeout specified in context file: 1000 second(s)
script returned:
You are running adcmctl.sh version 120.17.12010000.3
Starting concurrent manager for VIS ...
Starting VIS_0411@VIS Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /d01/oracle/vis/inst/apps/VIS_oracle/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/vis/inst/apps/VIS_oracle/admin/scripts/jtffmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /d01/oracle/vis/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for VIS on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
[Service Control Execution Report]
The report format is:
<Service Group> <Service> <Script> <Status>
Root Service Enabled
Root Service Oracle Process Manager for VIS_oracle adopmnctl.sh Started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP Server VIS_oracle adapcctl.sh Started
Web Entry Point Services OracleTNSListenerAPPS_VIS_oracle adalnctl.sh Started
Web Application Services Enabled
Web Application Services OACORE OC4J Instance VIS_oracle adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance VIS_oracle adformsctl.sh Failed
Web Application Services OAFM OC4J Instance VIS_oracle adoafmctl.sh Failed
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrVIS_oracle adcmctl.sh Started
Batch Processing Services Oracle Fulfillment Server VIS_oracle jtffmctl.sh Started
Other Services Disabled
Other Services OracleFormsServer-Forms VIS_oracle adformsrvctl.sh Disabled
Other Services Oracle Metrics Client VIS_oracle adfmcctl.sh Disabled
Other Services Oracle Metrics Server VIS_oracle adfmsctl.sh Disabled
Other Services Oracle MWA Service VIS_oracle mwactlwrpr.sh Disabled
ServiceControl is exiting with status 3
More information about this error may be available in the server error log."
Edited by: user8009286 on Apr 10, 2010 11:59 PM

Extra process types

hi experts
i have some doubts please clarify my doubts
what are the extra process types in sap bi.ple tell me the answer.
regards
polu

Hi.......
Check this........
/people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
http://vinaysapbw.blogspot.com/2008/04/new-features-in-process-chains.html
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
............in this link follow this Path......Release notes by IT scenario >>EDW >>SP04 >>Process Chain
Regards,
Debjani......

Adalnctl.sh: exiting with status 127

Hi all,
I just clonned 11i, but noticed that when I restart apps tier I am getting "exiting with status 1" message.
Looked at the log and found:
Setting service OracleTNSListener80APPS_SPIUAT_finappstest01kt to mode 2
Executing service control script:
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_SPIUAT.
adalnctl.sh: exiting with status 127
.end std out.
.end err out.
Where do I start?
Thanks,
Eugene

Here is what adalnctl.txt shows. Could you please tell me if patch that you mentioned references these errors?
cat adalnctl.txt
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127

Processing type as SAP Exit with Variable 0F_ADAY

Similar Messages

Maybe you are looking for