Processisng leads to inconsistent positions for 01.09.2010 Financial Trans.

Hi friends,
In FTR_EIDT transaction, while editing the "Decrease" option, system display the error,when i try to save the transaction.
Processisng leads to inconsistent positions for 01.09.2010 Financial Trans.No.5504100005
Message no. TPM_TRL063
Diagnosis
An error exists in the derived flows. Further processing would lead to inconsistent positions for 01.09.2010.
System Response
Processing was terminated.
Procedure
Contact SAP.
Please suggest me?  How to solve this issue?
Thank you in advance
Chandra.

Hi Chandra R,
Please explain how you resolved this issue.
RJ

Similar Messages

  • Processing leads to inconsistent positions

    Hello
    My client issues index bond, of which there is no standard product type for that, i have since created a new product type called 04Z, based on 04x and 04L. When i try to create a transaction, ftr_ create, transaction type 300, i get the error below; this happens when i try to save the transaction.
    Processisng leads to inconsistent positions for 31.05.2023 Security ID Number NRA0230
    Message no. TPM_TRL063
    Diagnosis
    An error exists in the derived flows. Further processing would lead to inconsistent positions for 31.05.2023.
    System Response
    Processing was terminated.
    Procedure
    Contact SAP.
    what can be the problem in my settings
    Thank you in advance
    Victor
    Edited by: Hein Nagel on Jan 4, 2010 8:34 AM

    Hello Prasad,
    I've error TPM_TRL063 with transaction RTPM_TRDT_DATA_EXEC, the final repayment is just tested in other deal and the procedure management it's also correct. I've just inserted the initial ID security write down and negotiation spread using transaction TMP63A and TPM63B, at the end of TPM63 run the problem occurs: the position value in TPM63A are correctly managed by the systema (no error) the write down and negotiation spread are in error (TPM_TRL063).
    Best Regards
    Mario

  • Processing leads to inconsistent positions.. Msg: TPM_TRL063

    HI Experts:
    I have the following Error when running the transaction TPM27:
    Processing leads to inconsistent positions for 30.04.2011  CoCd:1040 ValArea001 ValCls0777  SEAcc:DEPXXXX
    ID000000XXXXXXX
    Message no. TPM_TRL063
    Diagnosis
    An error exists in the derived flows. Further processing would lead to inconsistent positions for 30.04.2011 .
    CoCd:1040 ValArea001 ValCls0777  SEAcc:DEPXXXX ID000000XXXXXXXX
    System Response
    Processing was terminated.
    It's mandatory to keep the definitions of business derivatives?
    It's necessary to Run the TPM27 after created the Financial Operation in TS01.
    I don't know that this are a customizing problem.
    Please your help.
    Best Regards.

    Hi ,
    Kindly provide the for that security account any transaction has happened , and provide the details of the flow related to the business transaction for that particular security account .

  • Error msg-Adaptive RFC reimport could lead to inconsistency of R/3 metadata

    Hi Experts,
    I am trying to reimport the model for Webdynpro application.
    I wanted to include more BAPIs to the existing model.
    When i am trying to do that I get pop up, with following message;
    "Adaptive RFC reimport could lead to inconsistency of R/3 metadata cached on J2ee server.
    Thus it is recommended to invalidate the cache this could be done either by re starting the J2EE server or by using adaptive RFC metadata cache invalidatation tool within webdynpro Console"
    Could anyone one help me in resolving this?
    Thanks and regards,
    Pradnya

    Hi,
    When you reimport an RFC/BAPI the metadata which is stored in the cache is not cleared. So it still refers to the old RFC/BAPI metadata. We need to clear this. This can be done by either restarting the server or webdynpro console.
    For Clearing through webdynpro console the version should be NW04 or 6.40 SP21 Onwards 2. NW04S or 7.0 SP12 Onwards
    Check this link.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10465350-b4f5-2910-61ba-a58282b3b6df
    Thanks,
    Gopi

  • I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

  • Error "Lead selection not set for context node"

    Hi everyone,
    I've got a Tree control in WebDynpro ABAP and I've implemented an "expand all" button.
    Here's the coding:
    METHOD expand_node_rec.
      DATA lo_el_child TYPE REF TO if_wd_context_element.
      DATA lo_node_children TYPE  wdr_context_child_map.
      DATA wa_lo_node_children LIKE LINE OF lo_node_children.
      DATA lo_nd_child TYPE REF TO if_wd_context_node.
      DATA lo_kschl TYPE klschl.
      DATA lv_has_children TYPE boolean.
      lo_el_child = node->get_element( ).
      lo_node_children = node->get_child_nodes( ).
      node->get_attribute( EXPORTING name = 'KSCHL' IMPORTING value = lo_kschl ).
      node->get_attribute( EXPORTING name = 'HAS_CHILDREN' IMPORTING value = lv_has_children ).
      IF lv_has_children = abap_true.
        node->set_attribute( name = 'IS_EXPANDED' value = abap_true ).
      ENDIF.
      LOOP AT lo_node_children INTO wa_lo_node_children.
        lo_nd_child = wa_lo_node_children-node.
        me->expand_node_rec( node = lo_nd_child  ).
      ENDLOOP.
    ENDMETHOD.
    However I'm getting the error above: "Lead selection not set for context node".
    Any suggestions?
    Edited by: DEVELOPMENT THEMIS on Jul 7, 2011 6:34 PM

    hi developement Themis,
    I think u didn't diclare "node" as context node. So declare it as a context node before using as a context node..as below
    DATA node  TYPE REF TO if_wd_context_node.
    or u can use  "lo_nd_child " as ur context node in ur program in place of "node"
    then I think this error will be removed.
    thanks,
    simadri

  • How to change position for items in shopping cart

    Hello,
    I am creating shopping cart using flat file. But i am not able to change the position for items i.e. both items contain position as 0000000001.
    Following are the item details of shopping cart which is created through portal. (from tcode BBP_PD)
    Items:
    Pos Type Quantity Unit Ordered_Prod Description Gross price
    0000000001 1 EA keyboard 100,00
    0000000002 1 EA CPU 1.000,00
    Following are the item details of shopping cart which is created using flat file & BAPI BBP_PD_SC_CREATE.(from tcode BBP_PD)
    Items:
    Pos Type Quantity Unit Ordered_Prod Description Gross price
    0000000001 1 EA MONITOR 1,00
    0000000001 1 EA MONITOR 1,00
    Position is not getting changed for item 2 & only first record is getting uploaded 2 times. My code is creating Shopping cart number .
    Please tell me how to change position of each item.
    Thanks & regards,
    Edited by: Ketkee Bhale on Sep 14, 2011 3:58 PM

    Moderator message - Cross post locked
    Rob

  • What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

    What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)?  The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock.  I do not understand why TotalStock in the report does not show zero.  Can anyone explain how this can happen?
    Note: the report is run for consumption/usage date range.
    Thank you,
    Doug

    Hi,
       MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA:  1817237 - Stock quantities and stock values in MIBC  which explains the system design.
    Regards,
    AKPT

  • License position for ADDM, ASH and AWR

    What's the license position for ADDM, ASH & AWR ?
    I see these are freely available via OEM DB Control on my database instance. However I think I remember seeing ( though I can't find it now ) something that said they are chargeable ( under the Oracle Diagnostics pack license ? ). So even though they are freely accessible from OEM, if you use them you become liable for a license fee !
    I understood that AWR is really the replacement for Stats Pack but that Stats Pack is still in 11g because it is free ( whilst ADDM, ASH and AWR are not ) - is that correct ?
    I have not been able to find any documentation pertaining to the licensing / chargability ( or otherwise ) of these producs / features
    Can anyone clear the confusion ?

    Hi,
    Statspack is still free and the diagnostic features are licenced.
    Pricing details can be obtained from
    http://www.oracle.com/us/corporate/pricing/price-lists/index.html
    http://www.oracle.com/us/corporate/pricing/technology-price-list-070617.pdf
    -Aravind

  • If your Team Lead given Functional Specifications for a BDC program and you

    If your Team Lead given Functional Specifications for a BDC program and you need to decide wether to write a Method Call Transaction or a Session.
    How you will decide ?

    Hi Krishna,
    See this you will got some ideas.
    Diff b/w call transaction and session method is
    Call transaction.
    1) asynchronous processing
    2) can transfer small amount of data
    3) processing is faster.
    4) errors need to be handled explicitly
    5) data is updated automatically
    Session method.
    1) synchronous processing.
    2) can tranfer large amount of data.
    3) processing is slower.
    4) error log is created
    5) data is not updated until session is processed.
    Thanks,
    Reward If Helpful.

  • Two Chief Position for an org unit

    HI,
    In PPOM I am unable to view two chief position for an 'X' org unit. I have checked in other 'Y' org. unit ( having similar attributes) and there two chief positions are displayed. The validity period and other relationship in both the org units are same.
    Can any suggest on how the two cheif positions are displayed for X org unit. (The client is stating that when Y org unit can display two chief positions then why not X org unit).   
    Thanks,
    Sai

    Hi Sai -
    What is the error or message that you are getting?
    By default SAP allows an Org Unit to have multiple Chiefs assigned to it. Are you able to manually assign the relationship to that position via PO13?
    If you send over the message, then I can further assist.
    Thanks,
    Nick

  • How to get the baselinegrid position for a line?

    Hi All,
    How to get the baselinegrid position for a line in a paragraph?

    Hi,
    2nd line baseline grid for yourPara paragraph is:
    yourPara.lines[1].baseline;
    last line baseline is:
    yourPara.endBaseline;
    Jarek

  • Just need to load Positions for legacy MM deposits

    Just need some guidance for initializing only positions in SAP-TR.
    Only initializing the balance position, none of the previous interests will be brought over.
    Thanks,
    Rahul

    Hi Rahul,
    I would say there are at least a few methods how to load Positions for legacy OTC instruments, depending on their complexity:
    if complexity of your open deals - the ones which starts at some point before the migration date and matures after - is rather low, you can input them as original deals with all parameters - including interest flows - in this way you secure that you have no deviations between your SAP entries and previous system - either you enter them manually or use the existing BAPIs to import the existing OTC transactions automatically. Then, you have to transfer all flows prior to the migration date to the status 'Posted', without actually generating documents in the general ledger - to do this, use a transaction 'TBB1_LC - Flag Flows as Posted';
    if your opens deals are rather complex - lots of nominal changes, like repayments, etc. - it might make sense to enter a deal as from chosen period to generate e.g. expected interest flow - so you define only balance position from certain date. You would still need to use the transaction TBB1_LC to to transfer all flows prior to the migration date to the status 'Posted'.
    hope this will help you.
    Kind regards,
    Renatas

  • Vertically sync time position for two or more 2D axis systems?

    In DIAdem: VIEW,
    Is it possible to vertically sync the time position for two or more 2D axis system charts placed above each other?
    I have displayed several channels on one 2D chart, and one channel of particular interest on a separate chart above, which was very easy to do. It would be really useful to sync the time position on both charts, such that scrolling one chart also scrolls the second chart, or zooming one chart also zooms the second chart to the same area, which seems like a fairly basic thing to want to do, but I haven't found a way to do it yet.
    Any help greatly appreciated!
    Solved!
    Go to Solution.

    Hi Brad,
    Yes, I have been using that method, which works fine up to a point.
    But, say you have several curves displayed on the bottom chart, with the Y-Axis set to "n Y-axes", then the start of the x-axis will be further across to the right than the top chart which has only one curve displayed.
    It is possible to add an empty area to the left of the top chart, to push the start of the x-axis across into alignment (see attached), but every time you add or remove a curve on the bottom chart, or the scale changes enough to add a digit, the start of the x-axis moves and the top chart needs aligning again.
    I'm really after a method to lock both ends of both x-axes to the same vertical screen position, so everything stays aligned automatically?
    Attachments:
    chart - full.JPG ‏152 KB
    chart - detail.JPG ‏145 KB

  • Multiple position for one central person and one user

    Dear Guru's,
    I have a requirement to create multiple position for a existing User - which already has CP Central Person and S Position.
    How to create this new position and assign the same CP to all the new positions ?
    Thanks and regards,
    Anil Rajpal

    Hi
    Yes you can definitely do this
    Create the new position and assign the CP to this position in transaction PPOME. You may find the position first there in PPOME, and then drag-drop the CP over the position to make the assignment. System will ask the percentage of responsibility.......which you will ve to enter...
    Regards
    Virender Singh

Maybe you are looking for