Processor 2.6 Bus 800 shows at XP with 200 External Clock
Hi ,
I have a Pentium4 2.6MHZBus 800, 256MB DDR Bus 400, MotherBoard MSI 865PE Neo2,HD MAXTOR 80G ,VGA GeoForce 4 8X G.Ward 128MB DDR
I upgrade the bios version to the latest 1.9 the i run "LOAD HIGHST PREFORMANCE
But : at the windows XP with SP1 i found the software with read the system configuration ..reading my processor with External clock "200"
Does it show the right ?
OR should it be shown As "800"
By the way the OverClocking on the setup is disabled
Can i use overclocking here? to what range?
Advice please
Thanks in Advace
Hi Wonkanoby,
Im little bit confuse , how can I get the optimum performace of FSB 800 of my processor ? Below is my CPU-Z report and my Computer Specs
Intel P4 2.6Ghz HT @ 2.9Ghz
MSI 865PE Neo2
Geforce FX5200 128MB DDR
80Gig Seagate 7200RPM and 40 Gig Seagate 5400RPM see-through (modified)
GENERIC 256MB DDR400 memory
Pixel View TV tuner
D-Link Internal Modem
Cooler Master AERO CPU Cooler running at 3900RPM
5 X Cooler Master Fan Casing
HEC Power Supply 350Watts
3.3V = 28Amps / 5.0V = 33Amps / 12.0V = 15Amps
MSI CD-RW 52x32x52
ASUS 16X DVD
Win2000 SP3
CPU-Z Report
CPU-Z version 1.20a.
CPU(s)
Number of CPUs 2 (1 Physical)
CPU#1 APIC ID = 0
CPU Name Intel Pentium 4
Code Name Northwood
Specification Intel(R) Pentium(R) 4 CPU 2.60GHz
Family / Model / Stepping F 2 9
Extended Family / Model 0 0
Brand ID 9
Technology 0.13 µ
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 2925.0 MHz
Clock multiplier x 13.0
Front Side Bus Frequency 225.0 MHz
Bus Speed 900.0 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 512 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 2925.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
CPU#2 APIC ID = 1
CPU Name Intel Pentium 4 (logical unit)
Mainboard and chipset
Motherboard manufacturer MICRO-STAR INC.
Motherboard model MS-6728, 100
BIOS vendor American Megatrends Inc.
BIOS revision V1.7
BIOS release date 10/06/2003
Chipset Intel i865P/PE/G/i848P rev. A2
Southbridge Intel 82801EB (ICH5) rev. 2
Sensor chip Winbond W83627HF
FSB Select 533 MHz
Performance Mode enabled
AGP Status enabled, rev. 3.0
AGP Data Transfert Rate 8x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 128 MBytes
Memory
DRAM Type DDR-SDRAM
DRAM Size 256 MBytes
DRAM Frequency 225.0 MHz
FSB:DRAM 1:1
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
# of memory modules 1
Module 0 DDR-SDRAM PC3200 - 256 MBytes
Software
Windows version Microsoft Windows 2000 Workstation Service Pack 3 (Build 2195)
Similar Messages
-
In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..
One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton -
When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.
I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.
-
I transfered music from my ipod to a new itunes library (new PC). The music plays in itunes but when I sync my ipod and try to drag songs from the itunes library to the ipod it wont load. It shows a circle with aline through it.
Have you selected manually manage music?
-
I have an ipod mini. and when it comes on it shows the battery with a ! mark. What does this mean?
I have an ipod mini. When it comes on it shows the battery with a ! What does that mean?
That just usually means the battery needs to be recharged. If you have already tried recharging it, see some of the troubleshooting steps in this Apple support document.
Charging your iPod battery
B-rock -
i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use
That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode -
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
eddiekero wrote:
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
At this point only a restore will fix your issue. -
I downloaded flashcards + with the top in app purchase of " US english female" for 1.99 and it shows the purchase with the option to download it again for free then it comes back "Failure ?! Receipt verification failed ! I have deleted the app and reinstalled several times and it still does not work !!!!I have a iphone 4s with the 5.1.1. Thanks
Lots of people having this problem. Flash card+ says this is due to a change in the Apple processes receipts... See posts on their facebook page. https://www.facebook.com/flashcardsplus/timeline?filter=2
-
Please help me, I have a mid 2010 Mac book pro with a toshiba mk3266gsxf harddrive. It started making a clicking noise and then my computer crashed. I proceeded to boot in safe mode, but it doesn't work. When I ran disk utility in recovery mode, it showed no problem with my disk. Does any one know what the problem is?
Sounds like a mechanical problem with the drive and it ruined the sectors where the Macintosh HD partition (and OS X, and files and programs) reside, but not your Recovery HD partition.
If you held command option r while booting, that's Internet Recovery and it's loaded via the Internet, not via the Recovery HD partition on the boot drive, so that could mean the drive is dead mechanically or there is another issue.
In either case the drive will likely have to be replaced, it's a matter of what occured to where and the drive state if you can recover data or not. If you made recent backups then your fine.
My computer is not working, is my personal data lost?
Most commonly used backup methods -
My 2007 Macbook pro Intel Core 2 Duo Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
DavidMy 2007 Macbook pro Intel Core 2 Duo Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David -
i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?
"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one. -
I want to create an intelligent file in my finder to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??
Thanks for your help.Take a look here: http://hints.macworld.com/article.php?story=20110314131100623
One of the comments suggests you can't use greater than or less than with the star rating in Finder.
You might try a Raw Query with the kMDItemStarRating.
In the criteria popup menu, select Other, then find the Raw Query entry.
You might have to play around with the syntax, but try "kMDItemStarRating >= 3"
Take a look here for query syntax: https://developer.apple.com/library/mac/ipad/#documentation/Carbon/Conceptual/Sp otlightQuery/Concepts/QueryFormat.html#//apple_ref/doc/uid/TP40001849-CJBEJBHH -
Show error message with multilingual in ADF Jdeveloper 10g 10.1.2
Hi
I want show error message with multilingual in my application, but i don't know how to do.
Can you give me some solution.
I live in vietnamese.
Thank a lot.When i using code
ResourceBundle bundle = ResourceBundle.getBundle("MyResources",Locale.ENGLISH);
String key = "hello";
String s = bundle.getString(key); // Hello
key = "bye";
s = bundle.getString(key); // Goodbye
then there is error follow
java.util.MissingResourceException: Can't find bundle for base name MyResources, locale en
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:804)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:773)
at java.util.ResourceBundle.getBundle(ResourceBundle.java:538)
at mypackage1.Application1.main(Application1.java:21)
Can you show where error or you have some code about that issue, you can show me -
While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .And while doing search for update it shows your software is uptodate..
Hi Hal,
One possibility, is a strange occurence when applying the big 10.5.8 combo, most people have to Repair Permissions twice in a row, then reboot.
Maybe you are looking for
-
WEBUTIL PROBLEM ON FILE UPLOAD WUT-127 UNABLE TO CREATE WORKAREA
hi pl help me i have installed webutil in forms OC4J but when i tried the same steps in 9iAS rel2 i am facing problem WUT-127 Unable to cretae workarea and after prosseing Ok i am getting WUT-123 The webutil.jar file cannot be found on the Applicatio
-
TS1398 Why does my ipad keep saying poor connection on FaceTime ever since ios6
Why does my ipad keep saying poor connection on FaceTime since we went on ios6
-
Itunes 7.0.1.8 / xp --- momentary black screen w/white lines at startup
I upgraded to itunes 7.0.1.8 about a week ago. It's been fine, except now when I start up itunes a black screen with white lines flashes momentarily, then everything reverts back to normal. I'm pretty sure it just started happening in the last couple
-
How to delete,create, add and modify a item or a file
hi all, could u all pls provide mi with the source code for that? i have seen various functions on the web yet i dunno what is the correct functions to use pls kindly reply to me asap
-
Dear All I'm looking for some advice and experience on the best way to physically secure an Xserve. My company's clients have strict data protection policies and we need to do whatever we can to prevent data loss. Hence we are looking at implementing