Processor "bouncing" while rendering

I've been having issues while rendering in FCE.
The CPU normally peaks fairly high when rendering, but now it will peak for about a second, then drop to nothing, peak for another second, then drop to nothing, and continue this the entire rendering time.
This is causing my render times to double or triple. FCE also tends to "hang" for much longer than usual when trying to stop the render.
This doesn't seem to be happening in any other CPU intensive programs. Any settings I may have messed up?
Thanks for the help.
Mark

I've never watched the processor so wouldn't know anything about that.
Concentrating on your claim that FCE alone is experiencing problems, I would suggest that the first thing you do is trash the preferences exactly as detailed here http://www.fcpbook.com/Misc1.html
Also check that your hard drive is not more than about 80% full as that can mess up computer performance, though you did say everything else is OK.

Similar Messages

  • Processor not at 100% while rendering...

    Hey Everyone,
    I'm using Premiere Elements 11 on a laptop for rudimentary edits while I'm away from my desktop and I noticed that the processor usage maxes out at 58% (ca. 1GHz) while rendering. For the most part I can avoid rendering, but sometimes it's simply necessary in order to continue working.
    Does anyone know why this happens and if it can be fixed? Does it have to do with the software compatibility with this processor? Is it a Win8 issue? (I could install Win7 on the machine but I would like to avoid that if at all possible, but I would to fix this issue)
    Here are the specs for the laptop. On my desktop with an i5 3570 running Win7 x64 I don't have this issue.
    Gigabyte U2142 Win8 64-bit
    i5-3317U 1.7-2.6GHz
    4GB RAM
    64GB SSD (where PE11 is installed and where the project files are stored)
    256GB HDD (for storage)

    arizonadeux
    For a long while it has been difficult to find an active Premiere Elements Chat Panel.
    What I have been suggesting is the following
    Click on the following link to get to a Premiere Elements Chat Panel that is available and active.
    http://helpx.adobe.com/sea/contact.html?step=PRE_adobe-id-signing-in_stillNeedHelp
    Premiere Elements
    Adobe ID, Signing In
    Adobe ID, sign in, account help
    Chat Panel.
    I have the link set for those titles. If the set does not hold, then you will have to navigate the path to Chat Panel using the above titles.
    The titles could be better, but it does have an active Chat Panel which I hope will answer your question and/or direct you to Adobe
    Tech help.
    As for your computer setup, I would really like to see those Scratch Disks directed to the HDD. I do not consider 15.6 GB for "rendering files" to be enough. That may not be the whole story. But, we will let the details tell the story.
    Looking forward to your follow up with further details when you have a chance.
    ATR

  • While rendering a project in After Effects CC (Mac) , the application closes half way, saying it quit unexpectedly, Please Help!

    So, I have created a cool project that was a lot of hard work in After Effects CC (Mac), While rendering a project in After Effects CC (Mac) , the application closes half way, saying it quit unexpectedly. Here is the link to an error log which is automatically recorded when After Effects crashes:- After Effects Crash (Mac) - Pastebin.com
    I have tried to render this project at least 5 times, shutting and restarting my computer. Please Help!
    Here is my computer specs if needed;
    Operating System: Mac OS X Mavericks version 10.9.4 (13E28)
    Processor: 2.5GHz Intel Core i5
    Memory: 4GB 1600 MHz DDR3
    Graphics: Intel HD Graphics 4000
    Screen Resolution: 13-inch (1280 x 800)
    Hard Drive: 500GB -- 186.49 GB free space.
    Thanks
    Milan

    Element 3d renders using your graphics card. Unlike After Effects, what GPU you're using matters a lot for Element.
    As it is, you don't really have one.
    You could try rendering an image sequence and then picking up your render where it left off when it crashes, but if a certain frame is just too much for your computer to handle, there's not much we can help with. I'd suggest adding a GPU that Element can use.

  • I want to freeze frame  while rendering and to continue

    hey all
    i am using a processor and a codec to grab frames (AccessFrame...)
    while rendering the media i created a mouse listener .
    on the first click i want to freeze the image and click 3 more times in order to get specific coordinates
    and then to carry on with the media transmission.
    so... what i did i stopped the processor clicked 3 more time and then started the player.
    ok so its work. when i start the player i get a black screen for a second and the media is playing....
    my question is. does anyone has a better way??? when i start the processor from the stopped stage i am getting
    a black screen.
    thanks
    Nati

    Open the video in QuickTime Player.
    Scrub to the frame.
    Edit/Copy.
    Open Preview.
    File/New From Clipboard.
    File/Save...

  • Com.adobe.ProcessingException: No output was generated while rendering

    Hi gurus,
    We have an ESS implementation working on our portal system.
    Our portal system is EP 7.0 support package level is 15. Our backend system is SAP ECC 6.0.
    Forms in ESS implementation are viewed via Adobe Acrobat.
    I configured Adobe in our sap ecc system and portal. It worked for 3 months without any problem till yesterday. Our users started to get "Error at start of form processing" error when they tried to view the forms. I searched the cause of the problem at portal side and found a log in default.trc:
    "Processing exception during a "Render" operation.
    Request start time: Mon Jun 23 16:48:09 EEST 2008
    com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.
    Please validate the input files or streams and try again.
    Exception Stack Trace:
    com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.
    Please validate the input files or streams and try again.
         at com.adobe.ads.operation.Render.execute(Unknown Source)
         at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
         at com.adobe.ads.request.Request.processOperations(Unknown Source)
         at com.adobe.ads.request.Request.process(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
         at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
         at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
         at SoapServlet.doPost(SoapServlet.java:51)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)"
    I checked the configuration step by step using the note-944221 everything works well.
    Any suggestions? It is urgent please help.
    Helpful answers will be awarded with points.
    Tolga

    Dear Chintan,
    I did check the settings about the user ADSUSER. ADSUSER was set as technical user so the expiration of the password is not possible.
    If there were a problem about the wrong password for ADSUSER in visual administrator or at portal side or in sap system, viewing the adobe form would not be possible from the start.
    And one last interesting thing is that the problem was solved after the restart of the portal system.
    Any other suggestions?
    Kindest Regards
    Tolga

  • "Conforming HDV" instead of "Writing Video" while rendering anything

    I am having a serious issue with FCP. I am getting the "Conforming HDV" dialog instead of "Writing Video" while rendering anything
    Short Project shot @ 720p 30 with a JVC GY-HD100U
    1) This gradually started happening more and more.
    2) Whenever I try to render anything, even a small crossfade, FCP shows the "Conforming HDV" dialog and proceeds to trash my video. Pieces of the video are repeated or frames are dropped and shots become jerky.
    Undo fixes the issue. Replacing the video with the original fixes the issue. But I connot RENDER ANYTHING!
    What would you all suggest?
    MBP C2D 15 - Dual 1.25 G4 MDD   Mac OS X (10.4.8)  

    Welcome to HDV. I've never had much better luck than this. The way the GOP structure of the mpeg-2 HDV stream works, the I-frames in your media almost never match up with the default GOP structure of the sequence, and you must wait for it to conform everytime you even think about touching it. Changing the render settings might help. If you are still runnning FCP 4.5, you will be plagued with scrambled render files - even if you can get it to show the correct rendered material in the timeline, if you export or encode or output to tape, you'll wind up with different (wrong) renders in the resulting files.
    You might consider batch exporting all your media to Apple Intermediate Codec (AIC), an all I-frame codec that helps to get around some of the GOP structure issues that make HDV so impossible to work with. Also, more RAM, or a better video card will take some of the load off of the processor as it tries valiantly to decode the HDV stream. Upgrading FCP to the latest version will also help with some of the render-scrambling etc.
    Hope this helps -
    Max Average

  • Multi threading race condition in JTable while rendering and truncating?

    Hi All,
    It seems that there is a race confition when rendering a large table which is truckated by another thread while rendering it on a JTable view.
    Let me try to explain what I think is the problem:
    When considering the folowing code from BasicTableUI
    First the size of the tbale model is determined in
    public void paint(Graphics g, JComponent c) {
    [snip]
            if (rMax == -1) {
             rMax = table.getRowCount()-1;
            }then this cMax is passed to:
    private void paintCells(Graphics g, int rMin, int rMax, int cMin, int cMax) {
         JTableHeader header = table.getTableHeader();
         TableColumn draggedColumn = (header == null) ? null : header.getDraggedColumn();
         TableColumnModel cm = table.getColumnModel();
         int columnMargin = cm.getColumnMargin();
            Rectangle cellRect;
         TableColumn aColumn;
         int columnWidth;
         if (table.getComponentOrientation().isLeftToRight()) {
             for(int row = rMin; row <= rMax; row++) {
              cellRect = table.getCellRect(row, cMin, false);
                    for(int column = cMin; column <= cMax; column++) {
                        aColumn = cm.getColumn(column);
                        columnWidth = aColumn.getWidth();
                        cellRect.width = columnWidth - columnMargin;
                        if (aColumn != draggedColumn) {
                            paintCell(g, cellRect, row, column);
                        cellRect.x += columnWidth;
         } else {The prepareRenderer works like this:
        public Component prepareRenderer(TableCellRenderer renderer, int row, int column) {
            Object value = getValueAt(row, column);
    [snip]
         return renderer.getTableCellRendererComponent(this, value,
                                                       isSelected, hasFocus,
                                                       row, column);
        }Here the above getValueAt is called for every cell to be rendered (in one thread) , while async a row can be deleted (in another thread) while the tables rendereing is still in progress. This leads to a value to be unexpectedly be null in the above return renderer.getTableCellRendererComponent method call: this method could return an empty panel to indicated that the cell is gone which is strange behaviour because the row doesn't exists anymore. The other option would be to return a null renderer so that the cell won't be rendered but that is impossible because the code doens't expect a null renderer. The third option could to be synchronize somehow the 2 threads so that any delete on the model has to wait until the rendering has finished.
    A possble solution could be to make paintCells at least protected and change to code to see if the designated row still exists, and if not don't increment the row height
    Any help/feedback is greatly appreciated!
    Note that this question is based upon Java5 and I do not know if this is also true for Java6
    Thnx
    Andr'e

    So this means that a TableModel must be manupulated (setValueAt , adding deleting and/or updating objects in this TableModel) through a thread in the EventQueue!
    i.e. (pseudo code)
            EventQueue.invokeLater(new Runnable() {
                public void run() {
                    getTableModel().setValueAt(........)
            });A

  • Error while rendering menus/slideshows--HELP!!

    Ok. I've done my homework on this forum and the Mac help pages and nothing fixes this problem.
    Initial issue: I have an iDVD project with pictures in drop zones, audio in the background, two menu pages each with 3-4 movies (both .dv and .mpg4), and a menu page with nothing but background audio and text.
    While trying to create a disk image I received the (familiar to this board) error that there was an "Error while rendering menus/slideshows" and that burning was to be aborted.
    What I tried:
    I cleared 41 gigs of free space on my boot drive.
    I transfered all of my media files onto the boot drive.
    I verified and repaired permissions. (until I did these last two items, the program wouldn't just fail, it would crash my computer, giving me the multilanguage *you must restart* greyed out page).
    I downloaded the most recent quicktime, iTunes, and Mac OS updates.
    I created a new iDVD project with only one video file (sepearately tried just a .dv and .mpg4 file).
    I removed all quicktime extensions from my 'library/quicktime' and '~library/quicktime' folders.
    I changed from 'higher quality' to 'better performance'.
    I told it to process in the background.
    I told it to delete the rendered files when it was done.
    I ran the apple hardware Test from my Apple CD.
    I turned off the hard drive/screen 'sleep' settings.
    I switched the video format from NTSC to PAL.
    I swore and came up with multiple comically profane file names for the disk images.
    Nothing. It always gives the error following the 'processing menus' portion of the rendering.
    Facts:
    iBook G4
    1.2 GHz Power PC
    1.25 GB Ram
    41.77 Gigs of free hard drive on boot disk.
    iDVD v5.0.1 (625)
    iMovie HD v5.0.2 (111)
    Quicktime v7.1.5
    Mac OSX v10.4.9
    I'm running into a deadline and need to have this burned!!
    *** Mac?
    iBook G4   Mac OS X (10.4.9)   1.2 G Ram

    I switched the video format from NTSC to PAL.
    Why in the world would you do this? You are in the
    NTSC area. You must change the NTSC/PAL setting
    BEFORE you start a project.
    Mostly because I don't know what it means and wanted to try anything.
    All the video and audio is original content.
    I ended up going to the Mac genius bar today. They said that it was a corrupted encoding file solved by a reinstall of iDvd. Sounds like a lot of people run into this problem?
    On the topic of file formats... do you know why my titles look great in iMovie, but look like crap once I export them? Even if I export at "Full Quality". And is .dv better than .mpg4? I need a good primer.
    thanks,
    Ian
    I suspect the problem lies in your mpg-4 content.
    iMovie/iDVD have very spotty mpg-4 support. Try
    using something like VisualHub (
    http://www.techspansion.com/visualhub/ ) to convert
    your mpg-4 files to DV format. (You may also be
    having problems with the music used in your menus.
    Where does it come from?)
    F Shippey

  • Fatal error while rendering UI component  since we are in BI 4.1 SP2 patch 4

    Hello,
    Since we are in BI 4.1 SP2 patch 4, we have one Analysis for Olap report  which have this message : Fatal error while rendering UI component.
    This report gets 7  folders  : 5 of them gets this error message and 2 of them works well
    It's the same problem with patch 6.
    Could you please help us to find a solution ?
    I don't know how to investigate.
    Regards,
    Nicolas

    Hey Nicolas
    We are experiencing a similar error. It appears when we try to create a conditional formatting rule on one of the reports.
    Were you able to find a solution to this?
    Regards
    Antonette

  • Error while rendering: Export file not found - what to do?

    Hi,
    I have been editing my video in four different premiere pro projects (as I got adviced to do from these forums because it's AVCHD clips). I have rendered these four projects and burned to four DVD's (total playtime is around 1.5hours) - which is working fine.
    But then I try to import all four projects into one big master project because I want to make a blu-ray iso. The import goes fine (I import like this: File > Import > Choose project > Import entire project)
    I export to encore, make the menus etc. and click "build" to start rendering. The problem is that after some time I get this error:
    Blu-ray Object: "sequence-name-here/project-name-here.prproj", Export file not found
    I have seen this error before while rendering some of the four individual projects - but when I saw them I simply just tried again by exporting to encore from the projects again. This seemed to work - but with the big master project I have tried several times with no luck.
    Can anyone help me fix this issue? :)

    Yes, I got this too:
    For posterity, here is what I have found that completely fixes this error, repeatedly:  Clear Encore's cache.  Specifically:
    Close your Encore project and exit Encore
    Go to the cache subdirectory named for your project (ie. if your save file is c:\projects\mymovie.ncor then go to c:\projects\mymovie\cache)
    Delete the file "mlf.cache.v10"
    If your Encore project contains any Premiere Pro dynamically-linked assets, start Premiere Pro and load at least one of the projects used in Encore.  (I have found that this reduces memory usage -- for some reason, Premiere Pro takes up less memory than if Encore spawns the PProHeadless.exe media server to serve the same function)
    Restart Encore and load your project
    ...and wait, patiently, for Encore to re-scan all of your assets and build up the cache again and don't touch it until it's finished.  I use Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653) to watch my disk activity and CPU to know when Encore is finished (just hover on the cyan-colored graph and you can see what program is performing the most disk activity).  Once it's all finished, I save, then immediately try to build my project again.  For proof of concept, my 40GB BD-50 project just built last night after getting this error yesterday afternoon.
    If any of your assets are not transcoded before you begin this process, transcode them all, then start this process over again from step one.  Clearing the cache does not clear the transcodes.
    I hope this helps someone.  I was not looking forward to completely re-authoring my project, which I've been working on (on and off) for a few months.

  • ABAP/4 processor: UNCAUGHT_EXCEPTION while activation

    Hi All,
    I am getting this error "ABAP/4 processor: UNCAUGHT_EXCEPTION" while the activation of DSO. I am attaching the dump
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_SDB_ORA_PROGRAM_ERROR
    Date and Time          19.12.2008 03:02:53
    Short text
    An exception occurred that was not caught.
    What happened?
    The exception 'CX_SDB_ORA_PROGRAM_ERROR' was raised, but it was not caught
    anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_SDB_ORA_UPDATE_STATS=======CP' has to be
    terminated.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_SDB_ORA_PROGRAM_ERROR', was not
    caught and
    therefore caused a runtime error.
    The reason for the exception is:
    An error occurred in the program:
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_SQL_EXCEPTION", which was raised in the program
    "CL_SQL_STATEMENT==============CP",
    specifically in line 31 of the (include) program
    "CL_SQL_STATEMENT==============CM002".
    The cause of the exception was:
    ORA-04031: unable to allocate 62208 bytes of shared memory ("shared
    pool","DBMS_STATS","PL/SQL MPCODE","BAMIMA: Bam Buffer")
    ORA-06508: PL/SQL:
    could not find program unit being called: "SYS.DBMS_STATS"
    ORA-06512: at line 1
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_SDB_ORA_PROGRAM_ERROR"
    "CL_SDB_ORA_UPDATE_STATS=======CP" or "CL_SDB_ORA_UPDATE_STATS=======CM00I"
    "UPDATE_STATS"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "gwpsapci"
    Network address...... "10.220.136.60"
    Operating system..... "AIX"
    Release.............. "5.3"
    Hardware type........ "0005E935D600"
    Character length.... 8 Bits
    Pointer length....... 64 Bits
    Work process number.. 30
    Shortdump setting.... "full"
    Database server... "de08u1642"
    Database type..... "ORACLE"
    Database name..... "GWP"
    Database user ID.. "SAPR3"
    Char.set.... "en_US.ISO8859-1"
    SAP kernel....... 700
    created (date)... "Aug 24 2008 21:05:40"
    create on........ "AIX 2 5 005DD9CD4C00"
    Database version. "OCI_102 (10.2.0.2.0) "
    Patch level. 175
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
    Memory consumption
    Roll.... 16128
    EM...... 25139520
    Heap.... 0
    Page.... 24576
    MM Used. 12500304
    MM Free. 4256248
    User and Transaction
    Client.............. 950
    User................ "ZZSUPPORT"
    Language key........ "E"
    Transaction......... " "
    Transactions ID..... "494AFB8FEB5A00D6E10080000ADC883C"
    Program............. "CL_SDB_ORA_UPDATE_STATS=======CP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Information on where terminated
    Termination occurred in the ABAP program "CL_SDB_ORA_UPDATE_STATS=======CP" -
    in "UPDATE_STATS".
    The main program was "RSPROCESS ".
    In the source code you have the termination point in line 40
    of the (Include) program "CL_SDB_ORA_UPDATE_STATS=======CM00I".
    The program "CL_SDB_ORA_UPDATE_STATS=======CP" was started as a background job.
    Job Name....... "BI_PROCESS_ODSACTIVAT"
    Job Initiator.. "E442207"
    Job Number..... 03030600
    Source Code Extract
    Line
    SourceCde
    10
    i_tablnm      = i_tablnm
    11
    i_signi       = i_signi
    12
    i_thresh_mod  = i_thresh_mod
    13
    i_degree      = i_degree
    14
    i_histo       = i_histo
    15
    i_granularity = i_granularity
    16
    i_cascade     = i_cascade
    17
    i_force       = i_force
    18
    i_flush       = i_flush
    19
    i_connection  = i_connection.
    20
    21
        Update Statistics
    22
    IF l_r_upd_stats->p_skip_upd IS initial.
    23
    CASE l_r_upd_stats->p_granularity.
    24
    WHEN 0. " DEFT
    25
    IF l_r_upd_stats->global_update_stats( ) = 'NO'.
    26
    l_r_upd_stats->part_update_stats( ).
    27
    ENDIF.
    28
    WHEN 1. " ALL
    29
    l_r_upd_stats->global_update_stats( ).
    30
    WHEN 2. " GLOBAL
    31
    l_r_upd_stats->global_update_stats( ).
    32
    WHEN 3. " PART
    33
    l_r_upd_stats->part_update_stats( ).
    34
    WHEN OTHERS. " AUTO
    35
    l_r_upd_stats->global_update_stats( ).
    36
    ENDCASE.
    37
    ENDIF.
    38
    39
    CATCH cx_sql_exception INTO l_r_exception.
    >>>>>
    RAISE EXCEPTION TYPE cx_sdb_ora_program_error
    41
    EXPORTING previous = l_r_exception.
    42
    CLEANUP.
    43
    TRY.
    44
    CATCH cx_sql_exception INTO l_r_exception.
    45
    RAISE EXCEPTION TYPE cx_sdb_ora_program_error
    46
    EXPORTING previous = l_r_exception.
    47
    ENDTRY.
    48
    ENDTRY.
    49
    50
    ENDMETHOD.
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    0
    SY-TABIX
    0
    SY-DBCNT
    0
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    Process Variant Run
    SY-MSGTY
    E
    SY-MSGID
    DA
    SY-MSGNO
    300
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20081219
    SY-UZEIT
    030252
    SY-XPROG
    SAPCNVE
    SY-XFORM
    CONVERSION_EXIT
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    6 METHOD       CL_SDB_ORA_UPDATE_STATS=======CP    CL_SDB_ORA_UPDATE_STATS=======CM00I    40
    CL_SDB_ORA_UPDATE_STATS=>UPDATE_STATS
    5 FUNCTION     SAPLRSDU_UTIL_ORA                   LRSDU_UTIL_ORAU01                      86
    RSDU_ANALYZE_TABLE_ORA
    4 FUNCTION     SAPLRSDU_UTIL                       LRSDU_UTILU01                          38
    RSDU_ANALYZE_TABLE
    3 FUNCTION     SAPLRSSM_PROCESS                    LRSSM_PROCESSU30                     1476
    RSSM_PROCESS_ODSACTIVATE
    2 METHOD       CL_RSSM_ODSACTIVATE===========CP    CL_RSSM_ODSACTIVATE===========CM007   117
    CL_RSSM_ODSACTIVATE=>IF_RSPC_EXECUTE~EXECUTE
    1 EVENT        RSPROCESS                           RSPROCESS                             144
    START-OF-SELECTION
    Chosen variables
    Name
    Val.
    No.       6 Ty.          METHOD
    Name  CL_SDB_ORA_UPDATE_STATS=>UPDATE_STATS
    I_TABLNM
    /BIC/AOD13ITM340
    244424443345433322222222222222
    F293F1F41394D34000000000000000
    I_SIGNI
    5775488
    0
    0
    I_THRESH_MOD
    0
    0000
    0000
    I_DEGREE
    3
    0000
    0003
    I_HISTO
    2
    0
    I_GRANULARITY
    0
    0000
    0000
    I_CASCADE
    0
    0000
    0000
    I_FORCE
    2
    0
    I_FLUSH
    X
    5
    8
    I_CONNECTION
    222222222222222222222222222222
    000000000000000000000000000000
    SPACE
    2
    0
    L_R_UPD_STATS
    |
    | 0000000F |
    | 80000027 |
    | %_DUMMY$$ |
    |  |
    | 2222 |
    | 0000 |
    | SY-REPID |
    | CL_SDB_ORA_UPDATE_STATS=======CP |
    | 4455445454555445455545533333334522222222 |
    | 3CF342FF21F504145F34143DDDDDDD3000000000 |
    | SY-XFORM |
    | CONVERSION_EXIT |
    | 444545544454545222222222222222 |
    | 3FE65239FEF5894000000000000000 |
    | L_R_EXCEPTION |
    |
    E0000001
    80000037
    SYST
    #######################################################A#######ÿ###############(##############
    000000000000000000000000000000000000000000000000000000040000000F000000000000000200000000000000
    000000000000000100000000000000000000000000000000000100010001000F000000000000000800000000000000
    SY
    #######################################################A#######ÿ###############(##############
    000000000000000000000000000000000000000000000000000000040000000F000000000000000200000000000000
    000000000000000100000000000000000000000000000000000100010001000F000000000000000800000000000000
    %_EXCP
    E0000001
    70000038
    %_SPACE
    2
    0
    SYST-REPID
    CL_SDB_ORA_UPDATE_STATS=======CP
    4455445454555445455545533333334522222222
    3CF342FF21F504145F34143DDDDDDD3000000000
    No.       5 Ty.          FUNCTION
    Name  RSDU_ANALYZE_TABLE_ORA
    I_ALL_COLUMNS
    2
    0
    I_FORCE_ESTIMATE
    X
    5
    8
    I_FORCE_STATISTICS
    2
    0
    I_PERCENTAGE
    1
    0000
    0001
    I_PERCENTAGE_SPECIFIED
    X
    5
    8
    I_TABLNM
    /BIC/AOD13ITM340
    244424443345433322222222222222
    F293F1F41394D34000000000000000
    I_TEMP_TABLE
    2
    0
    I_T_TABLNM
    Table[initial]
    C_PROCESSED
    2
    0
    SY-REPID
    SAPLRSDU_UTIL_ORA
    5454554555544545422222222222222222222222
    310C2345F549CFF2100000000000000000000000
    <L_TABLNM>
    /BIC/AOD13ITM340
    244424443345433322222222222222
    F293F1F41394D34000000000000000
    SYST-REPID
    SAPLRSDU_UTIL_ORA
    5454554555544545422222222222222222222222
    310C2345F549CFF2100000000000000000000000
    %_SPACE
    2
    0
    SY
    #######################################################A#######ÿ###############(##############
    000000000000000000000000000000000000000000000000000000040000000F000000000000000200000000000000
    000000000000000100000000000000000000000000000000000100010001000F000000000000000800000000000000
    %_DUMMY$$
    2222
    0000
    L_SIGNI
    5775488
    0
    0
    L_PARALLEL_DEGREE
    3
    0000
    0003
    L_HISTO
    2
    0
    L_FLUSH
    X
    5
    8
    SY-ONCOM
    S
    5
    3
    No.       4 Ty.          FUNCTION
    Name  RSDU_ANALYZE_TABLE
    I_FORCE_ESTIMATE
    X
    5
    8
    I_FORCE_STATISTICS
    2
    0
    I_PERCENTAGE
    1
    0000
    0001
    I_TABLNM
    /BIC/AOD13ITM340
    244424443345433322222222222222
    F293F1F41394D34000000000000000
    I_TEMP_TABLE
    2
    0
    I_T_TABLNM
    Table[initial]
    SYST-REPID
    SAPLRSDU_UTIL
    5454554555544222222222222222222222222222
    310C2345F549C000000000000000000000000000
    RSDU_C_OBJTYPE-VIEW
    VIEW
    5445
    6957
    L_DBFUNC
    RSDU_ANALYZE_TABLE_ORA
    554554444554554444545422222222
    2345F1E1C9A5F412C5FF2100000000
    SY-XFORM
    CONVERSION_EXIT
    444545544454545222222222222222
    3FE65239FEF5894000000000000000
    L_PERCENTAGE_SPECIFIED
    X
    5
    8
    %_VIASELSCR
    0
    4
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    L_PROCESSED
    2
    0
    RS_C_FALSE
    2
    0
    SY-SUBRC
    0
    0000
    0000
    SCREEN
    %_17NNS0000194530_%_%_%_%_%_%_
    2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
    5F17EE30000194530F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
    SY-REPID
    SAPLRSDU_UTIL
    5454554555544222222222222222222222222222
    310C2345F549C000000000000000000000000000
    L_MESSAGE
    222222222222222222222222222222222222222222222222222222222222222222222222
    000000000000000000000000000000000000000000000000000000000000000000000000
    No.       3 Ty.          FUNCTION
    Name  RSSM_PROCESS_ODSACTIVATE
    I_CRT_ACTIVATION
    2
    0
    I_DROP_CREA_SEC_IND
    2
    0
    I_INSTANCE
    ODSA_4C7HUKHW8WV06KLJFFYZP95BW
    445453434544535533444445553345
    F431F43785B8787606BCA669A09527
    I_JOBNAME
    BI_PROCESS_ODSACTIVAT
    44555444555445445454522222222222
    29F02F3533FF43134961400000000000
    I_LOG_ID
    4C7HSJQKN58AR2DG5NSOGNB5O
    3434545443345344345444434
    43783A1BE58122475E3F7E25F
    I_NO_CONDENSE
    2
    0
    I_ODSOBJECT
    OD13ITM3
    443345432222222222222222222222
    F41394D30000000000000000000000
    I_PARENT_BATCH_ID
    222222222222222222222222222222
    000000000000000000000000000000
    I_SERIALIZE
    2
    0
    I_T_REQUEST_SEL
    Table[initial]
    I_VARIANT
    OD13ITM3_ACTIVATE
    443345435445454542222222222222
    F41394D3F134961450000000000000
    I_WITH_COMMIT
    X
    5
    8
    E_ERROR
    2
    0
    E_RNR
    ODSR_4C7HULKAVPVJRPAS8MAP3IYWS
    445553434544455545545344534555
    F432F43785CB1606A20138D1039973
    E_T_ACTIVATE_RNR
    Table[initial]
    E_T_ERROR_RNR
    Table[initial]
    E_T_MSG
    Table IT_18345[3x704]
    CLASS=CL_RSSM_ODSACTIVATEMETHOD=IF_RSPC_EXECUTE~EXECUTEDATA=L_T_MSG_PROC
    Table reference: 123
    TABH+  0(20) = 07000000A05FD4B0000000000000000000000000
    TABH+ 20(20) = 0000007B000047A900000003000002C0FFFFFFFF
    TABH+ 40(16) = 0400012500000D40001024C401800000
    store        = 0x07000000A05FD4B0
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 123   (0x0000007B)
    label        = 18345 (0x000047A9)
    fill         = 3     (0x00000003)
    leng         = 704   (0x000002C0)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000050
    occu         = 16    (0x00000010)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x07000000A05750F0
    pgHook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 10517 (0x00002915)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x00000001)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    collHook     = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    E_T_ODSR_RNR
    Table[initial]
    L_LINES
    0
    0000
    0000
    %_DUMMY$$
    2222
    0000
    SCREEN
    %_17NNS0000194530_%_%_%_%_%_%_
    2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
    5F17EE30000194530F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
    SY-REPID
    SAPLRSSM_PROCESS
    5454555455544455222222222222222222222222
    310C233DF02F3533000000000000000000000000
    SY-MSGID
    DA
    44222222222222222222
    41000000000000000000
    G_CHANGED
    2
    0
    SPACE
    2
    0
    SY-MSGNO
    300
    333
    300
    SY-MSGV1
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    SY-MSGV2
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    SY-MSGV3
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    SY-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    L_PERFORMED_ANALYZE
    2
    0
    G_R_ALV_GRID
    F0000000
    F0000000
    RS_C_TRUE
    X
    5
    8
    L_S_ODSTABNAME-M_TAB
    /BIC/AOD13ITM340
    244424443345433322222222222222
    F293F1F41394D34000000000000000
    SYST
    #######################################################A#######ÿ###############(##############
    000000000000000000000000000000000000000000000000000000040000000F000000000000000200000000000000
    000000000000000100000000000000000000000000000000000100010001000F000000000000000800000000000000
    <%_TABLE_RSDS>
    RSAU_C_PROTCLASS
    1234
    3333
    1234
    SYST-REPID
    SAPLRSSM_PROCESS
    5454555455544455222222222222222222222222
    310C233DF02F3533000000000000000000000000
    G_BUTTON_REQUDEL
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    %_SPACE
    2
    0
    No.       2 Ty.          METHOD
    Name  CL_RSSM_ODSACTIVATE=>IF_RSPC_EXECUTE~EXECUTE
    I_VARIANT
    OD13ITM3_ACTIVATE
    443345435445454542222222222222
    F41394D3F134961450000000000000
    I_EVENT_START
    RSPROCESS
    55554445522222222222222222222222
    2302F353300000000000000000000000
    I_EVENTP_START
    4BO77YTX6F8UVLQ22AEHHYIPO
    3443355534355453344445454222222222222222222222222222222222222222
    42F7794866856C1221588990F000000000000000000000000000000000000000
    I_JOBCOUNT
    03030600
    33333333
    03030600
    I_BATCHDATE
    20081218
    33333333
    20081218
    I_BATCHTIME
    030306
    333333
    030306
    I_T_PROCESSLIST
    Table IT_123[18x528]
    PROGRAM=RSPROCESSDATA=G_T_PROCESSLIST
    Table reference: 37
    TABH+  0(20) = 07000000A02596D8000000000000000000000000
    TABH+ 20(20) = 000000250000007B0000001200000210FFFFFFFF
    TABH+ 40(16) = 040000740000116800102CC421800000
    store        = 0x07000000A02596D8
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 37    (0x00000025)
    label        = 123   (0x0000007B)
    fill         = 18    (0x00000012)
    leng         = 528   (0x00000210)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000069
    occu         = 16    (0x00000010)
    access       = 1     (ItAccessStandard)
    idxKind      = 1     (ItIndexLinear)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x07000000A0262CF0
    pgHook       = 0x07000000A0258600
    idxPtr       = 0x07000000A0259788
    shmTabhSet   = 0x0000000000000000
    id           = 93    (0x0000005D)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 32    (0x00000020)
    lineAlloc    = 32    (0x00000020)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x00000001)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    collHook     = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    I_LOGID
    4C7HSJQKN58AR2DG5NSOGNB5O
    3434545443345344345444434
    43783A1BE58122475E3F7E25F
    I_T_VARIABLES
    Table[initial]
    I_SYNCHRONOUS
    2
    0
    I_SIMULATE
    2
    0
    I_REPAIR
    222222222222222222222222222222
    000000000000000000000000000000
    I_BATCHID
    222222222222222222222222222222
    000000000000000000000000000000
    E_INSTANCE
    ODSA_4C7HUKHW8WV06KLJFFYZP95BW
    445453434544535533444445553345
    F431F43785B8787606BCA669A09527
    E_STATE
    2
    0
    E_EVENTNO
    00
    33
    00
    E_HOLD
    2
    0
    SY-REPID
    CL_RSSM_ODSACTIVATE===========CP
    4455554544544545454333333333334522222222
    3CF233DFF4313496145DDDDDDDDDDD3000000000
    <%_L003>-RNR
    L_T_REQUESTS
    Table[initial]
    L_S_REQUESTS
    222222222222222222222222222222
    000000000000000000000000000000
    SY-SUBRC
    0
    0000
    0000
    SYST-REPID
    CL_RSSM_ODSACTIVATE===========CP
    4455554544544545454333333333334522222222
    3CF233DFF4313496145DDDDDDDDDDD3000000000
    ICON_GREEN_LIGHT
    @08@
    4334
    0080
    L_JOBNAME
    BI_PROCESS_ODSACTIVAT
    44555444555445445454522222222222
    29F02F3533FF43134961400000000000
    L_S_SELE-NO_CONDENSE
    2
    0
    L_S_ODS-OBJECT
    OD13ITM3
    443345432222222222222222222222
    F41394D30000000000000000000000
    L_S_SELE-ODSACTSERIAL
    2
    0
    L_ERROR_PROC
    2
    0
    L_T_MSG_PROC
    Table IT_18345[3x704]
    L_T_MSG
    Table[initial]
    No.       1 Ty.          EVENT
    Name  START-OF-SELECTION
    G_VARIANT
    OD13ITM3_ACTIVATE
    443345435445454542222222222222
    F41394D3F134961450000000000000
    G_TYPE
    ODSACTIVAT
    4454454545
    F431349614
    %_DUMMY$$
    2222
    0000
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    G_OBJECT
    CL_RSSM_ODSACTIVATE
    445555454454454545422222222222
    3CF233DFF431349614500000000000
    G_INSTANCE
    222222222222222222222222222222
    000000000000000000000000000000
    SY
    #######################################################A#######ÿ###############(##############
    000000000000000000000000000000000000000000000000000000040000000F000000000000000200000000000000
    000000000000000100000000000000000000000000000000000100010001000F000000000000000800000000000000
    %_SPACE
    2
    0
    %_REPAIR_%_APP_%
    222222222222222222222222222222
    000000000000000000000000000000
    G_STATE
    2
    0
    G_EVENTID
    RSPROCESS
    55554445522222222222222222222222
    2302F353300000000000000000000000
    G_HOLD
    2
    0
    G_EVENTPARM
    4BO77YTX6F8UVLQ22AEHHYIPO
    3443355534355453344445454222222222222222222222222222222222222222
    42F7794866856C1221588990F000000000000000000000000000000000000000
    G_JOBCOUNT
    03030600
    33333333
    03030600
    G_BATCHDATE
    20081218
    33333333
    20081218
    G_EVENTNO
    00
    33
    00
    G_BATCHTIME
    030306
    333333
    030306
    G_T_VARIABLES
    Table[initial]
    G_T_PROCESSLIST
    Table IT_123[18x528]
    %F007017_1000
    Log ID (Internal Use Only)
    46624422467676662576246672222222222222222222222222222222222222222222222222222222222
    CF7094089E452E1C05350FEC99000000000000000000000000000000000000000000000000000000000
    G_LOGID
    4C7HSJQKN58AR2DG5NSOGNB5O
    3434545443345344345444434
    43783A1BE58122475E3F7E25F
    G_CHAIN
    ZLIS_13_VDITM
    5445533554454222222222222
    AC93F13F6494D000000000000
    G_REPAIR
    222222222222222222222222222222
    000000000000000000000000000000
    G_BATCHID
    INFO_4C7HUKA7PY9ANY239LWNF76M4
    444453434544355344533345443343
    9E6FF43785B170991E9239C7E676D4
    Internal notes
    The termination was triggered in function "raiseExcp"
    of the SAP kernel, in line 2099 of the module
    "//bas/700_REL/src/krn/runt/abexcp.c#7".
    The internal operation just processed is "EXCP".
    Internal mode was started at 20081219030246.
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    => 64 bit R/3 Kernel
    => 64 bit AIX Kernel
    => Heap limit      = unlimited
    => Stack limit     = unlimited
    => Core limit      = 1073741312
    => File size limit = unlimited
    => Heap address  = 0x1154fc6a0
    => Stack address = 0xfffffffffffb080
    => Stack low     =  0xfffffffffffb080
    => Stack high    =  0xffffffffffff880
    => Stack Trace:
         AixStack() at 0x1000a2474
         CTrcStack2() at 0x1000a256c
         rabax_CStackSave__Fv() at 0x1000d0e3c
         ab_rabax() at 0x1000cd81c
         raiseExcp__F6HeadId() at 0x100429ba0
         ab_jexcp__Fv() at 0x100428d30
         ab_extri__Fv() at 0x10038e6dc
         ab_xevent__FPCc() at 0x100ab5cc4
         ab_trigg__Fv() at 0x100ab59b0
         ab_run() at 0x1014d42dc
         N_ab_run() at 0x100ed3f4c
         dynpmcal() at 0x100ed2d40

    HI karthik..
    The Error Msg is due to insufficient memory while storing the Data in Database(i,e ODS) and this error UNCAUGH EXCEPTION will come due to " like there is an exception raised but no code to catch it(to activate the ODS)".
    so chk the problem with the Basis People... those guys can give clear info pertaining to this kind of  problems...
    Genereally in our case we raise ticket to Basis people..
    hope useful....
    cheers
    Sukhai..

  • Premiere Pro and Media Encoder crash while rendering H.264

    Very recently, a problem's popped up where Premiere Pro and Media Encoder (CC) will crash while rendering H.264.
    It's only while rendering H.264 - other formats seem to work fine.
    And I don't mean that it returns an error, I mean it hard crashes with a Windows "Adobe Premiere Pro CC has stopped working" popup.
    It doesn't crash at a consistent time during the render, even on the same project. Occasionally, it won't crash at all, but this is usually not the case.
    I've tried disabling CUDA and my overclock to no avail. Please help!

    On the topic of opening a project on the exact same version of Premiere Pro CC 2014 (yes it is definitely up to date, and the 2014 version), to overcome this export crash problem that ZachHinchy has brought up - you can't. Technically speaking, one should easily be able to open a Premiere Pro CC 2014 project from one system on another system running the exact same up to date, legitimate version of Premiere Pro CC 2014 without any kind of error. But for some reason, this has been disallowed(?) by Adobe. It has facepalm written all over it. Does anyone agree that this is at least a little bit silly?
    I have tried exporting a Final Cut Pro XML from my project to try and open the sequence at uni on a Mac, so I can render my project when I finish my edit. It half works - the clips are there, but the sequence is gone - i.e. 12 hours of painstaking sequencing and micro-edits that had me at several points in time wanting to insert my hand through my monitor with enough force to make a large hole. I really cannot afford redo this sequence, as my assignment is due tomorrow, and I have to work at 6 oclock in the morning, so I also cannot afford to stay up till the early hours of tomorrow morning. Wish me luck that some miraculous event has taken place overnight that will somehow allow me to just open my project, on the same version of Premiere, on a Mac, without hassle. (Apple OS is not friendly to anything but its own selfish nature, so I am having doubts).
    Adobe please, if you can do anything at all to help, you will save my assignment, and my faith will be restored. Otherwise, I'll just get my money back and buy Final Cut instead.
    I cant even
    If I find a way to fix either of these problems, I will post straight away.

  • Premiere Pro CC Crashes While Rendering With Mercury OpenCL

    Hi guys!
    Every time I try to render a ~2 min video in H.264 using the OpenCL renderer which is fully supported on my 7970 (2x Crossfire) the program crashes while rendering. (Usually around 28%)
    If I switch to Mercury Software renderer, it renders perfectly.
    I am currently using AMD 13.6beta2 drivers, and PPCC is fully updated, any suggestions?
    Additionally, for the half minute that it tries to render with OpenCL before crashing, by checking the GPU utilization % in AMD catalyst overdrive, it seems to not be utilizing the gpu at all... And then promtly crashes of course...
    I hope I can fix this problem soon... Really dissapointed with this adobe product.
    Thanks a lot!

    Rendering without any effects ----------> Still Crashes
    Disabling Crossfire ----------------------- > Still Crashes
    Reinstalling Premiere ---------------------> Still Crashes
    Physically Removing the 2nd GPU -----> Works
    So, is there any way I can get this to work while having both GPUs physically installed in the computer?
    It would be quite a hastle to remove the 2nd one each time I need to use PP!
    One odd thing also is that from watching the gpu utilization while rendering H.264 1080p, the GPU is only being used to about 30%, and very intermittently.... I would imagine things would accelerate quite a lot if it actually utilized the whole GPU!
    Thank you very much guys!

  • Adobe Media Encoder CS5 crashes at a certain point while rendering

    Adobe Media Encoder CS5 crashes at a certain point while rendering, I have also tried to render directly from Premiere Pro but this only makes PremPro crash instead.
    The clip I am trying to render right now is 20 mins long, 1600x900 and is a .avi file. The output settings are H.264/HDTV 720p 29.97fps High Quality.
    This all started happening after I re-installed windows.
    Machine Specs:
    Intel i5 3570k
    8GB 1866MHz RAM
    Intel HD 4000 graphics (yes I know I should get CUDA)
    I made sure that CS5 was updated before posting this.

    >1600x900 and is a .avi file
    That size description makes me think this is a screen capture, not a camera file... if it is a screen capture, what codec/software did you use?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  • New Mac Pro (late 2013) crashes / freezes while rendering or editing in Premiere Pro CC

    We recently purchased a new Mac Pro desktop (Late 2013, 16GB memory, D700 Graphic Card, 2.7 GHz -12 Core, OSX 10.9.3) and we are running Adobe CC on it. When using Premiere Pro CC (7.2.2) I am having major issues while rendering and editing. About 50% of the time when I try to render it starts off real fast then just freezes. This happens in Premiere and Media Encoder. Sometimes I can just Force Quit Premiere or Media Encoder and other times I have to do a hard restart on the entire computer because the entire computer freezes. The computer will also occasionally freeze whenever doing simple editing or stacking layers. The  computer will also just decide to suddenly stop and restart when editing or doing simple tasks like browsing the web. Additionally there has been several times if the render does finish, the final video will have digital glitches throughout the video. I have to redo the render once or twice and it will finally be fine. This all is happening several times a day. This never happened on our previous Mac Pro, but we were not running Mavericks. I used Migration Assistant to transfer from old computer to new computer. So I don't know if this is an a problem with the actual Mac Pro, Mavericks, graphic card or Adobe? But right now I am very frustrated as you can imaging spending all this money for a computer that has been giving us more issues than our previous computer. Any help would be greatly appreciated!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for