Processor compatibility between two notebooks?

Hi,
I'm looking to upgrade the processor in my computer (an HP Pavilion dv6700). My dad has an HP-G60, which has a dualcore processor (that's all the upgrading I really need). We were wondering if our computers were compatible to the degree that it would be an easy swap to switch our processors into each other's computers.
My processor is an AMD Turion 64 X2. His is a Pentium Dual Core T4200.
Any help would be much appreciated. Thank you!

You're welcome.
You probably cannot switch the hard drives either without reformatting them and reloading the operating system.
That you can try though, if you are willing to lose all the data on each hard drive if they don't boot up in the swapped notebooks. It might work and it might not.
You may not be able to swap them back if the boot sectors become corrupted, which is why I say that.
It's up to you.
Paul

Similar Messages

I want to create serial communicatios between two notebooks via Bluetooth

Hi,
I'm trying to accomplish serial communications between two laptops via a Bluetooth connection.
The two laptops are NOT Toshiba notebook, but they are both running the Toshiba Bluetooth Stack For Windows. They are also both using the default Bluetooth Manager program that is supplied by Toshiba and Dell (just rebadged?).
Basically I can set up a connection no problems, but then I send serial data from one computer and watch the receiving serial port on the other computer but nothing ever arrives.
Are there any good tutorials for this? It would be nice to have something for the Toshiba Bluetooth Manager in particular as the windows and buttons will have the names as explained in the tutorial.
Thanks in advance.
Adam

I tried it for tests purpose via a hyperterminal connection and it worked.
Maybe the description contains also some helpful information for you.
Here is it:
PC1:
Start "Bluetooth Settings->Custom Mode->Select Remote PC->Select 'Serial Port'->Accept proposed COM port (in my case COM40)->Confirm wizard windows
until setup is finished".
PC2:
Start "HyperTerminal->Select COM7"
PC1:
Start "HyperTerminal->Select COM40 (in my case. See step 1 above)"
PC1, PC2:
Enter the same Passkey if security is turned on e.g. "0000"
PC1:
Everything what you type into HyperTerminal should be visible in HyperTerminal of PC2 and vice versa.

Bonjour between two notebooks

I have two notebooks. PB15 1.25 and MBP 17". I have read with interest how EASY it is to share files between two computers with Bonjour but despite my best efforts niether computer can see the other. I am led to believe that all one has to do is search for the other computer using Safari. Can anyone lead me thru this EASY process ?
Both are running 10.4.6

Thanks BDAqua,
That is my current method. I moved to Mac for the simplicity and always like to show that off to the Windose mugs. The Apple site would have us believe that Bonjour is simply connecting effortsly thru our browser and two guys in a hotel hallway are now connected. Well I'd like to see it.
"The computers and devices take over from there, automatically broadcasting and discovering what services each is offering for the use of others. The network could be as simple as two AirPort Extreme-equipped PowerBook users sitting in a hotel meeting room miles from the nearest AirPort Extreme Base Station with some large files they need to share. Before Bonjour, frustration. With Bonjour, your computer will discover others, making file sharing completely simple."
Oh really!
Any takers?
G5 DP 2.0 Mac OS X (10.4.6) G4 PB15 MBP 17' 2GB Nikon D2X

Compatibility between CRM 4.0 and IS-U 4.64

Hi,
My company is using SAP IS-U 4.64 and is studying the use of SAP CRM. Does there is any problem of processus compatibility between these two versions ?
I don't find any document on the market place or in sdn. Does there is a document that shows the optimization for cross application use of SAP ?
Thanks
Thomas

Hi Gaurav,
I've dealt with both realities (specially in IC Webclient) and from the configuration point of view and in my opinion, it is basically the same.
For me the main change is that, in IC webclient scenario, instead of you do some customizing in a XML code, in CRM5 you'll do it by configuring tables.
In CRM5, you'll have some nice functionalities that CRM4 doesn't have (e.g.: You can choose with channels your transactions are allowed, Email Workbench, ERMS categorization is time dependent, and so on...), but the big jump is given when you compare CRM5 to CRM6 (or CRM 2007).
Kind regards,
Bruno

Compatibility between Exchange 2007 service packs

Hi all, I have 5 servers Exchange:
- 3 Servers CAS and HUB
- 2 Servers Mailbox server in Microsoft Failover Cluster (MSCS)
Domain Controllers are all
Windows Server 2003 SP2
The versions of Exchange 2007 SP1 servers are all:
8.1 Build 240.6
I have thought about installing SP3 and RU13 in all 5 servers for Exchange, but I'm going to install SP3 and RU13 on 2 servers CAS / HUB and the following week at the other CAS / HUB server.
Finally, the following week in the two Mailbox Servers.
Is there any problem if I miss 2 servers CAS / HUB with SP3 RU13 and the other CAS / HUB in SP1, this will only be for a few days?
Is there any problem if I leave the servidors Mailbox Servers in SP1 while CAS / HUB are in SP3 RU13, this will only be for a few days?
regards
Microsoft Certified IT Professional Server Administrator

Hi Yupikaiey.
Only thing you should be concerned is if you have CAS-CAS proxy or the Mailbox Cluster part.
Your current plan looks good. Just stay alert for any uncommon issues popping up, which would normally mean due to the difference.
If you upgrade your servers in this order, you may avoid potential service interruptions.
Details below:
Version Constrains are more of between roles of 2007-2010-2013 and not between same version SPs or RUs.
Exchange 2013 Server Role Architecture
The Past: Exchange 2007 and Exchange 2010
Our goal was to make these server roles autonomous units. Unfortunately, that goal did not materialize in either Exchange 2007 or Exchange 2010. The server roles were tightly coupled along four key dimensions:
2.This also necessitated a tight versioning alignment – a down-level Hub Transport or Client Access shouldn’t communicate with a higher version Mailbox server; in some cases this was enforced (e.g., Exchange 2007 Hub Transport servers cannot deliver messages
to Exchange 2010 Mailbox servers), but in other cases they were not (e.g., an Exchange 2010 SP1 Client Access server can render data from an Exchange 2010 SP2 Mailbox server).
The versioning restriction also meant that you could not simply upgrade a single server role to take advantage of new functionality – you had to upgrade all of them.
The Present: Exchange Server 2013
If I upgrade the Mailbox server with a service pack or cumulative update, then for a given mailbox hosted on that server, all data rendering and content conversions for that mailbox will be local, thus removing version constraints and functionality issues
that arose in previous releases.
Exchange 2007 Servicing
http://technet.microsoft.com/en-in/library/dd421853(v=exchg.80).aspx
Deployment Order
Our test infrastructure guarantees that Exchange hotfixes work across multiple server roles. The order in which you apply the update rollup to the servers is not important except if you are deploying CAS-CAS proxying. Because the update rollups are not segmented
for different Exchange server roles or for specific file configurations, apply each update rollup package to all Exchange 2007 servers in your environment.
If you have multiple Active Directory sites, and if you deploy a Client Access server in the proxy sites that do not face the Internet, you must
apply the update rollup to the Internet-facing Client Access servers
and to the non-Internet-facing Client Access servers in the proxy site simultaneously. For other Exchange 2007 configurations, we recommend that you
apply the update rollup package to the Client Access servers before
you apply it to servers that are running other Exchange 2007 server roles, such as the Mailbox server role, the Hub Transport server role, and the Edge Transport server role.
Note:
Applying service packs and update rollups to clustered Mailbox servers requires specific planning and application steps. For more information about how to apply service packs to Exchange 2007 clustered Mailbox servers, see
Upgrading Clustered Mailbox Servers to Exchange 2007 SP1 or later. For more information about how to apply update rollups to Exchange 2007 clustered Mailbox servers, see
Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers.
For Patching and compatibility between versions:
Determine the service pack level of Exchange.
Update rollups are service pack dependent. For example, an Update Rollup 5 package is available for Exchange 2007 and for Exchange 2007 Service Pack 1. To determine the service pack level of Exchange, examine the
ExchangeVersion property. For more information about how to view the
ExchangeVersion property and about the build number that is associated with each Exchange version, see
Exchange Server 2007: Platforms, Editions, and Versions.
References:
How to Install the Latest Service Pack or Update Rollup for Exchange 2007
Exchange Server Updates: build numbers and release dates
We are looking at doing the roll-up to SP3
Coexistence of Exchange2007 SP1 and Exchange 2007 SP3
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

HT204053 Is it possible to sync calendars between two different users?

Is it possible to sync calendars between two different users?

Hi
Installing the drive into the older machine may work, you WILL get a lot of driver errors and the unit may even fail to boot. The other problem is that the drives may not be compatable, the drive in the broken PC is a SATA drive, older PCs had IDE drives with very different connectors.
Your best option is to do as you suggest and obtain a USB caddy and extract the data that way.
Make sure that the caddy you get will support SATA drives (all new ones will).
Although I am an HP Employee, all views expressed are my own and are not on behalf of HP
Regards
Ty
**Click Accept as Solution on a Reply that solves your issue to help others who are searching**

Compatibility between MSI NX6600GT-VTD128 and motherboard

Hi guys, I want to know if there's compatibility between my motherboard "MSI 875P Neo-FIS2R AGP8X" and the "MSI NX6600GT-VTD128" because I want to buy this Video Card but my doubt is about the compatibility or maybe some errors, and I have a 400W Power Supply.. that's ok for this video card?... thnx !!!

hi, how are you.
wel there are no cmpatibility issue with this motherboard and the video card... or i am not notify about...
but do you have to give "us" (all posiblle reply) more info about your pc, anyway the only limitation about it's the slot used, that motherboard uses agp8x and you have to buy a 6600vtd agp 8x, because thera are one model pci express that's all
the power issue: not a issue realy 400w power source are just enough
th real monster are hte 6800 family that need 470w or something like that to work fine
ok i hope best to you and your newer card, and tellme how works this magnificent piece of technological art(in middle rank) and the capture feature with onchip video processor
byee!!

TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

See Pondini's Transferring files from one User Account to another, for starters

Using Lightroom Cloud to Sync Catalog Between Two Machines

I have use of so many cloud services including the 20gb that Adobe gives me. Is there a way i can sync my catalog on the cloud so that i can have all my metadata on both my laptop and desk top? I also have 300gb of cloud storage though Copy. I would just like some recomendations on how best to go about it. Thanks

Hi Pat,
Using Lightroom Cloud to Sync Catalog Between Two Machines
If you’re running Lightroom on a laptop during your location shoots, you might want to take all the edits, keywords, metadata, and of course the photos themselves, and add them to the Lightroom catalog on your studio computer. It’s easier than it sounds: basically, you choose which catalog to export from your laptop, then you take the folder it creates over to your studio computer and import it.
You need to decide whether you want to export a folder (all the imported photos from your shoot), or a collection (just your Picks from the shoot). In this case, we’ll go with a collection, so go to the Collections panel and click on the collection you want to merge with your main catalog back in your studio. (If you had chosen a folder, the only difference would be you’d go to the Folders panel and click on the folder from that shoot instead. Either way, all the metadata you added, and any edits you made in Lightroom, will still be transferred over to the other machine.)
Please refer to http://www.peachpit.com/articles/article.aspx?p=1930499 for more details.
Thanks!
Eshant Jindal

Working days between two date fields and Changing Factory Calendar

Hi,
I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
I have written the routine using factory calender and its working fine except for two problems now:
1. If any one of the date field is empty then teh rsult should be zero.
2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
I am new to ABAP. Please help me how i can achieve these for below code.
DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
      IS_HOLIDAYS TYPE ISCAL_DAY.
DATA: T_DATE TYPE SY-DATUM,
      P_DATE TYPE SY-DATUM.
DATA : X_DATE(4) TYPE C.
DATA: CNT TYPE I.
REFRESH : IT_HOLIDAYS.
CLEAR : IT_HOLIDAYS.
T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
CALL FUNCTION 'HOLIDAY_GET'
EXPORTING
HOLIDAY_CALENDAR = 'CH'
FACTORY_CALENDAR = 'CH'
DATE_FROM = P_DATE
DATE_TO   = T_DATE
TABLES
HOLIDAYS = IT_HOLIDAYS
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 1
HOLIDAY_CALENDAR_NOT_FOUND = 2
DATE_HAS_INVALID_FORMAT = 3
DATE_INCONSISTENCY = 4
OTHERS = 5.
DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
X_DATE = T_DATE - P_DATE - CNT.
RESULT = X_DATE.
Please help
Regards
Zabina
Edited by: Syed786 on Nov 2, 2011 9:15 AM

Hi Zabina,
Try this function module 'DURATION_DETERMINE'.
Give the factory calendar and unit as DAY
With regards,
Rajesh

Using A FireWire cable between two Macs and Migration Assistance to transfer all my desktop to my macbook laptop, will all my apps, bookmarks, contacts and files be transferred? I am trying to make a complete copy of my desktop to my laptop.

Using a FireWire cable between two Macs and the Migration Assistance feature, will al my apps, bookmarks, contacts and files be tranferred?

See Pondini's Setup New Mac guide

How to find particular date lies in between two given dates

hi,
i have a problem. i have to find if particular day lies in between two given dates.
example two dates are joindate and expirydate.
1.joindate is 1/03/2007
expdate is 1/03/2008
now i have to find if 29 feb is in between this joindate and expirydate.
if any1 has ny idea please reply asap.
thanks.

The Date class has a before() and after() method you can use to compare Date objects.

Change or delete the docflow link between two existing documents

Hi All,
Is there any FM or soulution to change the doc flow link between two documents .
For ex .. i have document A and document B , and created a doc flow link from A to B , Now i have to change the succeeding document to C
I have tried to modify the doc link ,but its not working using crm_order_maintain.I thought of deleting the link between A and B and then create a new link Between A and C , but deletion of link bewteen A and B is also not working.
I have checked with FMs CRM_DOC_FLOW_DELETE_CHECK_EC and CRM_DOC_FLOW_DELETE_EC, followed by CRM_ORDER_SAVE AND COMMIT . i could not find any exception from this FMs , but still the doc link is not deleted.
Pls share if you have any suggestions.
Regards,
Nithish

Hello
I wrote a report to delink items from document flow. I uploaded it [here|http://wiki.sdn.sap.com/wiki/display/CRM/Removelinksfromdocumentflow].
Please, use with caution and always perform careful tests before you run it in a production envinronment.
Hope it helps
Joaquin
Edited by: Joaquin Fornas on Nov 15, 2011 11:49 AM

Compatibility between Java crypto and open ssl

Hello
I have some question about compatibility between java crypto and openssl library.
This is my case:
1.I created DESede key and stored it to file:
SecretKey key = KeyGenerator.getInstance("TripleDES").generateKey();
File f = new File("c:\\key.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f));
dos.write(key.getEncoded());
dos3.close();2.I encrypt some file "c:\\normal.dat" through:
ecipher.init(Cipher.ENCRYPT_MODE, key2);
byte[] enc = ecipher.doFinal(normalData);
File f2 = new File("c:\\enc.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f2));
dos.write(enc);
dos.close();

You have carefully left out some critical java code, namely the Cipher.getInstance() method. You'll notice in the documentation for this method that there 3 components to the "transform" argument of this method, the algorithm, the mode, and the padding. All of these must match exactly with the what openssl is using. Furthermore, if you are using one of the modes which require an IV, like CBC mode, then this must match exactly too. If you don't explicitly specify some of these parameters, you might get default values supplied. It is up to you to find out what these are.

DES Encryption compatibility between Microsoft dot Net and Java

Hi,
I have a situation that a Secret key is shared between two components like Core and the Customer. The customer encrypts a particular data using DES algorithm using the shared secret key. The customer uses Microsoft dot Net framework to do this. The encrypted data comes to core part which has been developed in Java. I want to know whether it is possible to decrypt the data value using DES algorithm which is coming from Dot Net platform. By the way I am getting different values. I want to know whether the byte[] in Java and Dot Net are same. Please provide me relevent answers to this question. Is it possible to make interaction with the cryptography between two differnet environments like Java and Microsoft Dot Net. I mean only DES algorithm.

DebadattaMishra wrote:
Hi,
I have a situation that a Secret key is shared between two components like Core and the Customer. The customer encrypts a particular data using DES algorithm using the shared secret key.Yuk! That is what SSL is for.
The customer uses Microsoft dot Net framework to do this. The encrypted data comes to core part which has been developed in Java. I want to know whether it is possible to decrypt the data value using DES algorithm which is coming from Dot Net platform. Yes though there are many pitfalls. The devil is in the detail of the .NET code. I would not tackle this without access to the full .NET encryption code.
By the way I am getting different values.This is not surprising since, as I said above, there are many pitfalls. The.NET documentation is poor at best and in some cases is very very misleading. Some of the .NET methods involved in key generation have obscure semantics and only after a very careful reading of lots of MS documentation did I start to understand the semantics.
I want to know whether the byte[] in Java and Dot Net are same. You should compare the 'bits' of each byte and not the numeric values since Java uses signed bytes.
Please provide me relevent answers to this question.This is not your call. Anyone is free to post answers as long as they follow the forum code of conduct.
Is it possible to make interaction with the cryptography between two differnet environments like Java and Microsoft Dot Net. I mean only DES algorithm.Of course!

Processor compatibility between two notebooks?

Similar Messages

Maybe you are looking for