Processor Core Cache Hierarchy Error in event viewer and BSOD

Hello everyone. Lately I have had some problems with random freezing, and I can't figure out what's causing it, hoping to get some help here.
I have a MSI X79A GD65 (8D) motherboard and 4930K cpu, currently running @ 4.4ghz, 1,33V, disabled all the power saver features.
The PC have been stable for almost a year without issue, and just recently the PC have started randomly freezing. It can be up and running for a whole week without problems and then suddenty freeze, or sometimes just few hours and then freeze. It seems like it always freezes when surfing the web, and it tend to happen during scrolling a website. It is never happening during gaming with heavy load.
The error message is following:
WHEA Logger A fatal hardware error has occurred.
Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Cache Hierarchy Error
Processor APIC ID: 8
Things I have tried: Reverted back to stock speeds in bios, updated to latest bios, tried a other power supply and formated windows with newest drivers, no difference. Memtest does not show any errors, and the pc passes prime/intel burn test. Cpu temps are fine.
What more can I do ? Is there a chance that the CPU have taken damage from my "little" overclock ?

Hi,
Can you tell what were temps of the CPU while overclocked and under full load (Intel Burn Test)?
Also, did you try different RAM? And are you currently running RAM at frequency of....? (Reduce to 1600MHz).

Similar Messages

K9N2 SLI Platinum - S3 Resume From Suspend - Cache Hierarchy Error

With my system I am running into a strange error when returning from S3 suspend. The underlying error seems to be "Cache Hierarchy Error". It occurs (only sometimes) within a minute or so after resuming from S3 suspend.
I goggled around and did not find out much. I also posted on the AMD user forum. No response. So I RMA'ed it. In the 2 weeks it took to receive a replacement I used my old AMD 5400+ processor. I had no problems with that processor in the entire 2 weeks.
I received a brand new (boxed and sealed) 9850. Ran for a day OK. Now I am receiving the "Cache Hierarchy Error" again.
From the forgoing facts I am positive this is NOT a AMD processor problem.
I am guessing that this error is showing up because the MB is not supplying enough power to the processor during S3 suspend??
Anyone have any thoughts on this please?
Note - this is NOT and end of the world problem (it does not occur during S1 suspend for instance so I can always do that).
Thanks:

Well, so far I have tried every driver I could find. I Started with the version on the CD, then downloaded from MSI, then tried M$ update, then nvidia. So, I really doubt it is a driver. I found a similar issue here: https://forum-en.msi.com/index.php?topic=120233.0
same processor and mobo. Thanx BOSSKILLER for the link. Filled out my info, I hope they get back to me soon.
I filled out a support request earlier and got this as a reply
Quote from: MSI Tech.
Please refer to Microsoft for possible fixes on this issue: http://support.microsoft.com/search/default.aspx?mode=r&query=does+not+resume+from+s3&spid=11732&catalog=LCID%3D1033&1033comm=1&res=20
none of those have anything to do with my problem and of course my first thought was that it was a M$ problem but had to rule that out after installing XP too... way to pass the blame
EDIT: After contacting MSI using BOSSKILLER's link, I got the real solution! A new BIOS just as he said Very quick response too
Thanx All

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Windows is Scanning and repairing drive... (- Errors in Event Viewer)

Long post, please be patient... :)
I have a fairly new (purchased 8/2013) Lenovo ThinkPad T431s with Windows 8.1 Pro 64-bit (updated from 8.0 -> 8.1). It has a very tricky error coming basically 8 / 10 boots:
Windows is Scanning and repairing drive...
Error details from Windows Event Viewer (a new similar error appears on every boot to event viewer):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference
number of the file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
What has been done 1st trying to fix that:
SSD disk has been changed (image from previous SSD copied back) ->
no solution, error remains
chkdsk /F /R -> no solution, error remains
SFC /scannow -> no solution, error remains
dism /online /cleanup-image /restorehealth -> no solution, error remains after a few boots
TRIED using Windows 8.1 "Update & Recovery -> Refresh Your PC without affecting your files" -> Inserted the Lenovo "Operating System Recovery Disk Windows 8 Pro (OEM Activation 3.0 Required)" BUT Windows did not accept
that DVD claiming "The media inserted is not valid"... ???
Ended up calling Lenovo Support and they instructed me to order the Recovery DVD from
Lenovorecovery.com -> Unfortunatelly Windows does not recognice the DVD(s)...
mountvol returns:
\\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3}\
(This is my C:\ drive where Windows installation resides)
\\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7}\
*** NO MOUNT POINTS ***
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\
*** NO MOUNT POINTS ***
\\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897}\
*** NO MOUNT POINTS ***
Then running fsutil dirty query on each returns:
Volume - \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3} is NOT Dirty
Volume - \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7} is NOT Dirty
Volume - \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} is Dirty
Volume - \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897} is NOT Dirty
The chkdsk on the dirty volume
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\ returned:
The type of the file system is NTFS.
Insufficient storage available to create either the shadow copy storage file or
other shadow copy data.
A snapshot error occured while scanning this drive. Run an offline scan and fix.
Diskpart output on the same volume:
DISKPART> lis par
Partition ### Type Size Offset
Partition 1 Reserved 128 MB 17 KB
Partition 2 Recovery 1000 MB 129 MB
Partition 3 System 260 MB 1129 MB
Partition 4 Primary 146 GB 1389 MB
Partition 5 Recovery 350 MB 147 GB
Partition 6 Recovery 19 GB 148 GB
Questions:
1) Are my Partitions OK, haven't "touched" anything?
2) Excluded the dirty volume from boot checking with chkntfs /x
-> still the Error appears in Event viewer log (but Scanning is skipped/not shown anymore during the boot).
What is causing the error?
3) Why do I have three (3) recovery partitions?

What has happened in the past days:
A) Lenovo on-site-Support changed the motherboard -> had no impact on the error (which I expected).
B) I found
instructions how to manually create USB Flash stick with a booting Custom (OEM) Recovery Image.
C) Booted with USB and performed "Refresh your PC without affecting your files."
D) Windows was refreshed but...
-->>
Still the error remains (Windows scanning and repairing drive \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} on each and every boot.
1) Related Error in Event viewer (NTFS):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference number of the
file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
2) Related Error in Event viewer (NTFS - Microsoft Windows NTFS):
Volume \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5) needs to be taken offline to perform a Full Chkdsk. Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via
PowerShell.
-->>
Now Lenovo support is proposing a full re-install (to be performed by myself) of Windows as this is SW issue.
Summary:
- Refreshing my T431s with OEM Image does not help
- The error remains on \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5; Lenovo Recovery partition) OR at least Windows thinks so...

Windows update error in event viewer

Wanna ask, recently some of our clients are experiencing slowness on their laptop. When I check, the patch update is successfully installed on the user machine. Then I check the event viewer and is saw a lot of below error. I cant seem to find the error
code 80240438 that relates to the WindowsUpdateFailure2 event name.
Just wondering if below error has anything to do with my current patch deployment update being deployed from SCCM?
Fault bucket 90717074036, type 5
Event Name: WindowsUpdateFailure2
Response: Not available
Cab Id: 0
Problem signature:
P1: 7.9.9600.17404
P2: 80240438
P3: 00000000-0000-0000-0000-000000000000
P4: Scan
P5: 101
P6: Managed {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
P7: 0
P8:
P9:
P10:

Can you provide some information like event ID, Operating System on which this issue is coming, service pack level, which patch cycle you deploying, etc.

Kereros error in event viewer logs.

Hi All,
We have configure Vintella SSO on XI3.1 previously and for some reasons now we have changed to NTLM SSO but still we are observing kerberos error in event viewer logs.
Error1 : Kerberos error was received on log on session , client time and server time etc.
Error 2: Kerberos client received KRB_AP_Error_Modified server host/fully qualified name .THis indicate that password encrypts the kerberos service ticket different than that on target server commonly this is due to identically named machine account in the target realm and the client releams.Please contact your adimistrator.
Please help.
THanks....

That's a Microsoft Error coming from a Microsoft log, I can't be sure what's causing it, you need to consult Microsoft.
Usually in their errors the service account that generated it (if by a service account) is one of the details or in the error message. You may need to stop running something with a service account...
Regards,
Tim

Rapidboot Error in Event Viewer

Folks - I am getting the following persistent error in Event Viewer on my brand new x220:
Faulting application name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Faulting module name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Exception code: 0xc0000005
Fault offset: 0x000000000000d248
Faulting process id: 0x35c
Faulting application start time: 0x01cc1678fdbedc11
Faulting application path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
Faulting module path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
Report Id: 41b6ea8b-826c-11e0-af33-f0def15ccf15
Would appreciate any thoughts. Thanks.
Solved!
Go to Solution.

I was able to resolve this issue and the PHCORE (Rapidboot driver) error no longer appears upon boot in Event Viewer.
I noticed that when Rapidboot's executable file (HYPERW764) BSOD'ed, both Superfetch and VSS became disabled in the Services - a big no-no. After re-enabling Superfetch and VSS, I was able to successfully uninstall and reinstall Rapidboot.
I believe the root cause may have been one of my antivirus programs (MSE or Malwarebytes), and since uninstalling them and installing ESET, I have had no issues with Rapidboot.

Application error in Event viewer Event ID :6398 The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition

Hi Friends,
On SharePoint 2010 application server I can see this error on event viewer for every one hour it is repeating. Please look at the screenshot below. I restarted the SharePoint search service 14 and SharePoint foundation search v4. but it is not solved
the issue.
Please look at the error below and help me to fix this issue .
Thanks
valmeekeshwar

Try this
https://sharemypoint.wordpress.com/2007/12/18/error-event-id-6398-and-6482-about-security-rights-of-osearch-service/
Stacy www.sharepointpapa.com

UCCX 7.0 Errors on Event Viewer

Hi Team.
The customer was alerting us about errors that are showing in the Event Viewer UCCX 7.0 server (on Windows).
The errors in Event Viewer are:
Event Type: Error
Event Source: CSAgent
Event Category: Kernel Rule
Event ID: 256
Date: 3/13/2013
Time: 1:22:12 PM
User: N/A
Computer: UCCX02-SS-CRT1
Description:
The process 'C:\Program Files\Java\jre6\bin\jusched.exe' (as user UCCX02-SS-CRT1\Administrator) attempted to initiate a connection as a client on TCP port 80 to 137.254.16.112 using interface Wired\HP NC7782 Gigabit Server Adapter. The operation was denied.
===================================================================================
Event Type: Warning
Event Source: Storage Agents
Event Category: Events
Event ID: 1210
Date: 3/13/2013
Time: 1:17:32 PM
User: N/A
Computer: UCCX02-SS-CRT1
Description:
Drive Array Tape Drive Cleaning Required. The tape drive in Slot 0, SCSI bus 2, SCSI target 5 requires cleaning.
[SNMP TRAP: 3044 in CPQIDA.MIB]
===================================================================================
===================================================================================
Event Type:    Error
Event Source:    CTIStorageServer
Event Category:    None
Event ID:    4
Date:        3/21/2013
Time:        3:20:58 PM
User:        N/A
Computer:    UCCX01-SS-CRT1
Description:
FCCC2005 Network communication error (TRANSIENT).
===================================================================================
Event Type:    Error
Event Source:    CTIStorageServer
Event Category:    None
Event ID:    4
Date:        3/21/2013
Time:        3:20:58 PM
User:        N/A
Computer:    UCCX01-SS-CRT1
Description:
FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
===================================================================================
Event Type:    Error
Event Source:    CTIStorageServer
Event Category:    None
Event ID:    4
Date:        3/21/2013
Time:        3:21:08 PM
User:        N/A
Computer:    UCCX01-SS-CRT1
Description:
FCCC2005 Network communication error (TRANSIENT).
===================================================================================
Event Type:    Error
Event Source:    CTIStorageServer
Event Category:    None
Event ID:    4
Date:        3/21/2013
Time:        3:21:08 PM
User:        N/A
Computer:    UCCX01-SS-CRT1
Description:
FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
===================================================================================
These last four errors were shown and generated intermittent communication between the telephony server (CallManager) and the IPCC because all active calls were interrupted.
I searched online documentation but can not get anything to tell me the meaning of these errors, their causes and some plan of action.
I appreciate your support to understand why these errors and explain to the customer the cause of these.
Thanks.
Best Regards.
Ernesto Gonzalez

Hi,
1. CSA denying the Java periodical update process from contacting its server. This can be safely ignored (Java is the platform of UCCX but is updated with a UCCX update, updating Java separately is not necessary, and in fact, not recommended. However, Java contains this periodic update check and - as far as I know - it cannot be turned off programmatically).
2. Tape cleaning required - is there a tape drive attached to the server?
3-7. Temporary network communication issue.
G.

TP Twist - Storage Errors in Event Viewer

------- UPDATE: Found out the first error was most likely caused by a USB drive since there are only two drives in the system. Still worried about the second error however..
Hey guys,
I checked my event viewer today and noticed two different errors that have occured numerous times within the last few days in what appears to be at fairly random intervals.
(1) - System Error: The Driver Detected a Controller Error on \Device\Harddisk2\DR2.
(2) - A Timeout (3000 Milliseconds) Was Reached While Waiting For A Transaction Response From The ExpressCache Service.
I am moving to reinstall the express cache software now and wait to see if the error presents itself again. Anyone else seen this before?

25/10/2008
No answers - never mind, I've found the solution. The Nokia PC Studio requires specific files from the Visual Studio C++ 2005 library. It doesn't however ensure that they are installed, and in this case it results in the "side by side" errors shown in my previous post.
It can be fixed by installing vcredist_x86.exe version 6.0.2900.2180 (Visual Studio 2005 library file). Having the later 2008 files installed doesn't overcome the problem.
That's more than a little slack Nokia!

Webhost failed to process a request-sharepoint 2013 found error in event viewer

I am getting following error everyday in event viewer,
My server has 4GB ram, 64bit, 2.26ghz processors.
error:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/64221192
Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/client.svc' cannot be activated due to an exception during compilation. The exception message is: Memory gates checking failed because the free memory (186724352 bytes)
is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment
config element.. ---> System.InsufficientMemoryException: Memory gates checking failed because the free memory (186724352 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve
this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element.
at System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
--- End of inner exception stack trace ---
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Process Name: w3wp
Process ID: 11320
Thanks,
Deepak patel

Add more memory to the host. 4GB is 4GB less than the minimum system requirements for SharePoint.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.

Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Receiving bitlocker error in Event Viewer whenever i attach an external HD to my desktop (non are encrypted with bitlocker)

Hello All,
Seem to be having a problem recently. Whenever I attach any external drive to my Desktop I receive the following error in Even Viewer. I never encrypted any of the drives in question with bitlocker.
Encrypted volume check: Volume information on \\?\Volume{7cc70383-5d6b-11e0-855c-001c25a5a540} cannot be read.
Event ID: 24620
And I cannot access my drive information. At first i thought it may be an issue with one of the drives I have partially encrypted with TrueCrypt but I tried several other unencrypted drives and I receive the same error and I cannot access the
data on my drives.
I tried to access the Bit Locker Recovery tool program (downloaded the VISTA Version since there was no Windows 7 Version that I could find), but it did not allow me to install the recovery tool to attempt some kind of fixing.
The strange thing is that I do not have Windows 7 Ultimate installed (which from what I understand is the only way to have Bitlocker). I have windows 7 professional and I never encrypted my drives with bitlocker, 1 out of the 3 drives is partially
encrypted with TrueCrypt, the other 2 are not encrypted with anything.
The stranger thing is that I can plug the external drives to another laptop and I can access the data fine with no problem or errors. I searched the forum for simliar problems, but did not see any responses with fixes to this issue.
The only thing I can think of is that my Desktop downloaded and installed a bunch of Windows Updates within the last 4-5 days.
heres is the update list
http://farm6.static.flickr.com/5304/5890096650_431b0f3627_b.jpg
Any assistance in attempting to figure this out would be appreciated.

Hi,
According to the error message, it should use
BitLocker Repair Tool to fix it, refer:
http://technet.microsoft.com/en-us/library/cc734057(WS.10).aspx
What error message did you receive when you use BitLocker repair Tool?
I notice one drive is encrypted with TrueCrypt, please use that program to unencrypt the drive for test.
If it doesn’t work, since the issue didn’t appear before, you can try to perform a system restore to see the result.
Hope that helps.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

BI 4.1 Multiple Errors on Event Viewer

Hi
My client uses BI Platform 4.1 Support Pack 1 Patch 1. During the past 2 days, there have been several errors logged on the Event Viewer on the BO server. Now, the infoview platform is unresponsive and just hangs for all the users. On having a look at the Services in CMC, the WebI Processing Server status was "STARTING" though nobody had manually tried to stop/start it. So, when I checked the event viewer fr any further errors, there were several repetitive errors which were logged:
1) Log Name:      Application
Source:        Server Intelligence Agent
Date:          22/07/2014 20:04:44
Task Category: Error
Level:         Error
Description:
Server Intelligence Agent: server BO.WebIntelligenceProcessingServer is being recycled.
2) Log Name: Application
Source: BusinessObjects_cms
Date: 23/07/2014 06:29:57
Task Category: Database
Level:         Warning
Description:
Database access error. Reason [Microsoft][SQL Server Native Client 10.0][SQL Server]Transaction (Process ID 60) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.. (FWB 00090)
(This warning is recorded multiple times)
3) Log Name: Application
Source: BusinessObjects_cms
Date: 23/07/2014 09:47:38
Task Category: OSCA_Services
Level: Error
Description:
CMS Server Watcher: server named 'W2K8R2_BO.WebIntelligenceProcessingServer' is being marked as down because it is unresponsive
(This error is recorded multiple times within 20 minutes). IT restarted the server and BO is now working fine.
I could not locate any other errors which would give me some more insight to the root cause of these errors. Could someone share some useful posts/links about similar kinds of errors? I tried to search on the forum, and i see suggestions stating that it could be related to network or connectivity. I'm not quite sure though.
Many Thanks
DE

Thanks Sebastian
We had to restart the SIA and the deadlock issues stopped appearing. For a couple of hours everything was running fine, until we noticed the following errors.
Log Name: Application
Source: Application Error
Date: 23/07/2014 13:04:16
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
Faulting application name: WIReportServer.exe, version: 14.1.1.1072, time stamp: 0x52310a77
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1b68
Faulting application start time: 0x01cfa65efeb52f5b
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\WIReportServer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d95bdba2-1269-11e4-x3x3ds-6c3be5befa0c
Log Name: Application
Source: Server Intelligence Agent
Date: 23/07/2014 13:04:22
Event ID:      4096
Task Category: Error
Level:         Error
Keywords: Classic
User:          N/A
Description:
[Node Name:BO]
[User Name: BO$]
Server Intelligence Agent: server BO.WebIntelligenceProcessingServer stopped unexpectedly.
The WIPS restarted itself. Is there a definite root cause for this issue?
Many thanks
DE

Error in Event viewer - COM Server application security Issue

Dear All,
I am installing one software on windows cluster environment. But while installing I am getting continuous error in System in Event Viewer as 'The application-specific permission settings do not grant Local Activation permission for the COM Server application
with CLSID {xxxxxxxxxxxxx} and APPID {xxxxxxxxxxxxx} to the user NT SERVICE\SQL Server Distributed Replay Client SID (S-1-5-80-3249811479-4343554-65656-65665) from address LocalHost (Using LRPC). The security permission can be modified using the Component
Services administrative tool.'
I have seen in component services, that app ID I am getting for DReplayController service. On security tab if I want to give permission to that particular user then to which user I want to add in 'Launch and Activate permissions'. I am not getting 'SQL Server
Distributed Replay Controller' user in list.
So, please help me.
Thanks in advance.

Hi,
Please try to add this account: NT AUTHORITY\SYSTEM.
More information for you:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 2012
https://social.technet.microsoft.com/forums/systemcenter/en-US/cd8a2c95-70db-4df6-b7f5-eedcc5d898c7/the-applicationspecific-permission-settings-do-not-grant-local-activation-permission-for-the-com
Event ID 10016 issue in SQL Cluster Server
https://social.technet.microsoft.com/Forums/sqlserver/en-US/c5a27692-05c0-4ee4-b97f-1ea438b4e5f7/event-id-10016-issue-in-sql-cluster-server?forum=sqldisasterrecovery
In addition, if there are any further requirements regarding SQL, here are some SQL forums below for you:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Processor Core Cache Hierarchy Error in event viewer and BSOD

Similar Messages

Maybe you are looking for