Processor fan was producing lot of noise and nothing was displaying in monitor

hi
recently my call manager was not working.
while it was switching on the processor was continiously producing lot of noise
and t was not displaying nothing on monitor.
no changes was made after sucessfull running from last 5 mnths.
can any one clarify what is the problem.
thanks
regards
praveen kumar gvk

hi
thanks for rply
i am having ibm server, model is 7825, the server was noot booting, nothing was displaying in monitor.
1. serever power on but it was not load into the os.
2. pci riser was installed. there is no saparate video slot.
3. monitor was connected to standard vga.
4. in the server bmc heart beat led blinking, standby power led, sas/sata controller power led is glowing.
5. hard disk drive activity led is glowing continuously.
the problem is server is not booting. nothing was displaying in monotor. all the fans are working fine. i had tried each fan they are all working. i also try to boot with single ram. but the server was not booting.

Similar Messages

TS1367 My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!

My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!

Here's the Apple support article on beeps https://support.apple.com/kb/HT1547

HT4623 I found an update ios6 in my iphone settings and then I tapped on install ,but it is going on and nothing is displaying .Only apple logo is displaying frequently.It has been happening for 13 hours.my question is how much time it will take to upd

Can anybody help in my concern below
I found an update ios6 in my iphone settings and then I tapped on install ,but it is going on and nothing is displaying .Only apple logo is displaying frequently.It has been happening for 13 hours.my question is how much time it will take to update ios

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

A few months ago my fan started making a lot of noise and is getting really hot. I've taken steps to prevent overheating, but nothing has changed. Is it a battery issue?

I've had the computer for 2 1/2 years and it started getting really noisy about 4 months ago. I'm using rulers to elevate the computer above the surface of the table to prevent overheating, but its still getting really hot and the fan is still making a lot of noise on and off. Could this be a battery issue?

Intel-based Macs: Resetting the System Management Controller (SMC)

Why is my iMac's CPU fan making a lot of noise?

Hello!
My 27" iMac (late 2009) is making a lot of noise for the last few months. The noise doesnt occur when you start up, but after you do something what is not really intensive for the computer suddenly the CPU fan is going up to about 4000 rpm. I have tried resseting the PRAM and the SMC but it won't help. I have inserted an image so you can take a look for yourself!
Kind regards,
Emiel

Try resetting the iMac SMC and PRAM reset again, this time do each reset 2x. On occasion the first time does not work, but if it continues to be noisy then you probably have a mechanical problem and the fan may need replacing.

Macbook fan makes a lot of noise, in particular on safari with flash

Hi,
Whenever I turn on Safari, my macbook starts to make a lot of noise, in particular on sites with flash. I guess this is not normal. I have the latest flash installed and my mac software is up to date. I have a mac with 2G memory attached to a 23" cinema-display. Any suggestions?

Have same problem with mac mini g4. sample site is http://www.wakfu.com/ stay a bit longer and fan noise starts up.
Also, playing flash game makes the fan starts spinning (this never happened some time ago, 2 years and a couple of months before)

IMac 24 line-ine a lot of noise and no audio...

Hi guys!
I've a problem...i've tryed LineIn..and other utility but no luck. If i plug my xbox360 outpu or a mp3 output into the iMac linein's i obtain a terrible noise and a really really low sound....but for 2 times the audio worked fine...and at a certain point when i've streached the wires the noise was gone...but no is totally only noise...HELP

Hello Eidan
Welcome to Discussions
To prevent damage to your iMac's or xbox's audio system that cord should no longer be used if you find it has a short or the wrong end???
The Mac needs to have a Mini Stereo plug for input to it's jack, look at the one in the link below to compare the plug end with the one you have.
http://www.maplin.co.uk/module.aspx?TabID=1&criteria=usb&ModuleNo=11425&doy=sear ch&C=SEO&U=Strat15
Note: Mini Stereo plug is segmented into three parts "Right/Left/common"
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

HT3235 MacBook Air is connected to an external monitor via Apple Mini DisplayPort to VGA Adapter. At one time it worked just fine, now when I plug the monitor into the Mac, the mac screen goes blue and nothing appears on the monitor.

This monitor works, on a PC. Could the connector be bad or the port on the Mac Air? Any ideas?

You have the display set in Extended Desktop mode with the MacBook as the main screen. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to use the MacBook’s keyboard and trackpad to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
If you can’t see your MacBook screen because it’s broken or the backlight is off use the F7 key to switch between Extended Desktop and Mirror Display.
(From the MacBook User Guide: F7 (video mode toggle key) Switch between dual-display mode (extending the desktop across the built-in display and an external display) and video-mirroring mode (presenting the same information on both displays).

Mac Pro will not boot, constant loud fan noise and nothing else

hello,
earlier tonight,i put my mac pro on sleep, then later on, when i wanted to take it off sleep and use it, it made the loud fan noise, which it always does but goes away, but this time it the fan wount slow down and the loud noise stays and i dont see anything on the screen. im guessing the fan noise is the ATI x1900 card...
any help please..i just bought it 2 months ago...

Hi, here are the steps I would go through. I would unplug the Mac Pro completely from everything and look at the video card's fan intake to make sure it isn't plugged and just make sure everything "looks" correct. I would then plug the machine back into one monitor/keyboard/mouse (leave all the other peripherals disconnected. Once that is done push the power button. Does anything happen? If not then if you have another mac and an external hard drive, make a copy of the OS on the drive and see if you can get the Mac Pro to boot off that drive. If the video card doesn't work then it will not show anything when booting off an external drive. If the external boot does work then I would suspect that you have a bad hard drive (or it crashed). At that point I hope you have a back up of all your data and such.
Mind you these are steps I would go through. What a nightmare. One other thing to check, make sure your monitor didn't die.
Message was edited by: jlseattle74

My CD drive is making lots of noise and ejecting CDs

Help! My CD drive is rejecting every disc I try to insert. I'm hoping this doesn't mean my drive is failing... any suggestions? Thanks!

Well, since it is acting up, it could be failing. Not sure what kinds of home tests
one could to do tell for sure; nor do I know if any system logs would be generated
that could tell a user or a tech if there is a related hardware problem behind this.
But it may need to go into a shop for a inspection and estimate on replacement.
That may cost you a minimum shop rate, and hopefully they can tell you. Since
the iBook series is not easy for a user to gain access to or upgrade internal parts
a competent repair company would likely be the answer to fixing a failed part; or
if you have some skills and can understand detailed instructions, there are online
guides on how to replace an optical drive as well as hard disk drives in iBooks.
The tedium and time, plus worries of having a small wire break, keep people out.
A simple problem involving a little time and a new part, installed professionally, is
often best done where they know the product well, and guarantee their work.
Good luck & happy computing!

I have installed firefox and it works well on everything except that I cannot access my gmail and twitter accounts. Tried lots of things and nothing works.

I have made sure the sites are allowed in privacy settings. Every time I try to load either of them I get nothing for gmail and a non-member page for twitter and cannot login on either

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
If the above does not help;
'''[https://support.mozilla.org/kb/Clear+Recent+History#w_how-do-i-remove-a-single-website-from-my-history Remove History For One Site]'''
Open the History Manager '''<Control><Shift> H.'''
In the search bar, enter the name of the site.
Right click on one of the listings and select '''Forget About This Site.'''
This should remove all information, including any passwords / settings.

Printer cartridges constantly realigning - a lot of noise

OFFICEJET 7000 wide format: almost every time i print the printer realigns the cartridges (or at least that's what i think it's doing). it makes a lot of noise, and to be honest, is starting to really irritate me. i use HP cartridges, and while i am not constantly printing, i do print a lot throughout the day. any way to fix this?
also curious to see how i can get an alarm when my ink is running low. i run on windows7, 64-bit.
any help?
thanks~

Hi @FZR
I would like to help you with the noise you are hearing from your Deskjet 1510.Please post back with the answers to the following questions;
Is the printer on a flat surface?
How long has the printer been noisy for?
Did anything change around the time the noise started? (ie. paper jam, error message, printer was dropped/bumped, power surge)
Are there any blinking lights, or error messages on the printer?
When was the last time that the cartridges were changed?
If you make a blank copy, when do you hear the grinding noise?
If you open up the printer do you see any broken parts?
When opening up where the cartridges go, do they move freely?
Are the cartridges installed correctly? (ie. cartridges are level and not popping up).
Perform a hard reset. With the power on remove the power cord from the back of the unit, and then the wall outlet. Press and hold the power button for 30 seconds (drains the excess power from the printer). Plug the power back into the wall outlet, and then the printer.
Are you still getting the clicking noise after this?
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HT1338 Problem: My Mac Pro is heating and the fan produce a lot of noise, what shall I do? I got the new Montain Lion

Dear best Users,
What shall I do? My Mac Pro 2.53 GHz Intel Core 2 Duo/OS X 10.8 13-inch 2009= Is heating and producing a lot of noise with the internal Fan.
Best,
Dario van der Lündin

If you can, open Activity Monitor and see what's using up all the %CPU.
If its kernel_task, shutdown immediately and do a PRAM reset, like this:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
‘command’ – ‘option’ – ‘P’ – ‘R’
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should and with the kernel_task process back to normal.
If that's not it, try quitting whatever the process is by selecting it in the Activity monitor window, then 'Quit' in the task bar. If the process refuses to quit, post back with the name of the process.

Macbook Pro is getting extremely hot and fan seems to be making a lot of noise when running windows 7

I recentely installed windows 7 on my Macbook Pro 15' late 2008 maybe 10-15 minutes into browsing the internet or watching a youtube video it gets really hot and the computer fans seem to be making a lot of noise. Is there any way to resolve this issue?

Intel-based Macs: Resetting the System Management Controller (SMC)

T430s fan noise and fan speed monitor not working?

Hi, I just bought this T430s from the outlet store. I noticed a rather loud fan noise and found out s lot of compalints about the T430 model. I guess the problem I have is not as severe as those T430 users (e.g. the noise may not be as loud), but I still want to monitor the fan speed. Here's my problem:
1. none of the third party software can show fan speed, they can only show the cpu temperature, such as speedfan and aida64.
2. I tried to download the fanspeedcontrol driver from lenovo, but after installing it, the task manager does not show that the fanspeedcontrol exe. is working.
I do not want to change the fan speed, but just want to monitor the speed so that I can have a better understanding of whats going on. Does anyone have the similar problem?
Thanks.

Hi Alan, (I know this conversation was from several months back),
I don't know the answer to your questions. It seems that your fan is operational, as far as its most basic functional requirement.
I don't have experience with any particular software programs or widgets that indicate fan speed, sorry.
Do you have any view, through software, of the CPU (and GPU?) sensed temperature? Those would be very good data to observe.
If it were either disconnected or non-functional, I assume that your computer would report a POST error right after power-on (and self test).
But I just wanted to suggest here that in an unfortunate possible scenario, consider if the thermal grease on the heat sink(s) was inadequate (or was missing), then the fan would be running higher than normal (probably always spinning at a high rate), and it won't be taking enough heat away from the processor(s), i.e. inadequate cooling.
Which could be corrected by a technician (or DIY). This is pure speculation, it is not a definite, at all.
Larry

Processor fan was producing lot of noise and nothing was displaying in monitor

Similar Messages

Maybe you are looking for