Processor glitch
Is a simple question.
I have a KT3 Ultra2 series mb with a via kt333 chip series.
I am running an Athlon xp2400 cpu on Windows XP.
The infoview reports the processor to be only an xp1800+.
How and where do i fix this???????
(I am bios friendly)
thanx.
Hi
That sounds correct, this is Via 64 bit forum, and my AMD64 3200+ runs at 2000 MHz , while the second machine on the KVM is a K7 board with Athlon 2500( or is it 2400) but it shows 1500 MHz, The Chip Name does not refer th MHz, but to an intel inspired protocol.
cheers
jocko
Similar Messages
-
Info about a glitch in AMD CPU
Hmm I hope that MSI got this fix in their bioses..
http://news.com.com/AMD+offers+fix+for+processor+glitch/2110-1006_3-5245501.html?tag=nefd.hedHopefully we'll see something from MSI, as far as a new BIOS is concerned, sooner than later.
-
Has itunes 10.5.1 cured the audio glitch that blighted 10.5 with people running an amd processor
has itunes 10.5.1 cured the audio glitch that blighted 10.5 with people running an amd processor ?
iTunes 10.5.2 fixes this issue.
-
Upgrade G3 B&W and G4 Single Processor from OS 9.2.1 to 10.4 Tiger?
I Purchased a G4 Installation / restore disk OS 10.4......Used an external DVD drive and disk opens fine on both machines, but when I click on install, both machines give me the following error message (even if I use the "C" key on startup..."startup disk was unable to select the install CD as the startup disk (-2)....There is no support for OS 9 or it's related browsers on the internet, and I use both my G3 (home) and G4 (business)....I need to have access to the internet in both locations. Would someone kindly give me some advice on how to upgrade to OS 10.4.......drivers?.......use external Hard drive? Many thanks in advance......
Hi Limnos......Many thanks for the info...good stuff. As it turns out, my G3 B&W is a server version and was given to me by a company that I worked for until they moved to northern (brrr) Wisconsin. It has two SCSI cards, one of them the LVD -2 ADPT card. Thanks to you I have already installed the firmware on the card. Some of the info on trhe G3 suggests that I need to be running O.S. 8.6 to upgrade to O.S. X???? I have been running O.S.9.2.1 for years but Comcast, E- Bay and half the rest of the world out there no longer supports Browsers, etc. for O.S. 9....Why would I need 8 when I have 9.2.1.that doesn't make much sense. This computer IMHO was way ahead of it's time and cost the company that gave it to me something in the neighborhood of $2700.00 when they bought it new! It has two firewire ports along with USB and the SCSI
cards and SCSI hard drive.....It is a great computer, and the only reason that I never tried to upgrade to O.S.10
sooner is the fact that it has been rock solid reliable running 9.2.1, and I kept hearing about "glitches going on with the early versions of O.S.10." You know how that one goes..."If it ain't broke, don't try to fix it". I had Adelphia Cable Internet for quite a few years, and they supported O.S.9, but their tech people for the most part were clueless about the macs. I really need to get X on this machine!
One final question...My G4 is a single processor 733 machine, and believe it or not was given to my son when it was only a year old! We didn't get an O.S. install disk with it, but the (gray) disk I just purchased IS
a G4 (specific) install/ restore disk that according to many threads I've seen should work on my G4. I haven't been able to determine from the info you so kindly gave me if it needs a firmware update or not? There seem to be so many versions of the G4 that I'm not sure what category it fits into as far as firmware requirements are concerned........It has plenty of RAM and two firewire ports, but beyond that I'm puzzled. Thanks again! -
How do I fix PARKED cpu's in Windows 7 with i7920 processor?
First, let me say if it weren't for you guys in this forum I would have quit Premiere Elements 7 a long time ago. Keep up the good work. I don't know how you find the time to keep up with everything. I don't usually write to forums as I don't know what I'm doing. I try to wade through all the posts to find some kind of answers.
I was using a 1.73ghz core 2 duo Vista 32bit laptop to do movies. I take a lot of home video that nobody is going to watch. I didn't want to burn it up so I got a desktop i7920 2.66 w 12 gb memory (overkill) 2 1TB raid 1 drives Nvidia EN8400GS graphics Windows 7 Home premium 64 bit. (Iwould have preferred 64 bit Vista as Windows 7 has a lot of glitches but 7 came with computer). I looked around the forums for anything on unbalanced cpu usage but didn't see what I was looking for. Maybe I missed and you can point me in the right direction.
The problem with my laptop was one core was always doing 50 to 100% and the other was loafing according to performance monitor. Affinity says both cores used. So I get the new machine and only two cores doing 50 to 100% of the work, 4 are parked most of the time and others are loafing @ 5-10%. The only way to get them all working is realtime. That kicks them all into gear, but defeats the reason for having the i7 processor.
Lo and behold I find that this PARKING is designed into Windows 7 and possibly Vista. I was looking forward to have a somewhat balanced cpu usage. I am pretty sure you guys have figured out how to shut off the parking business so there is a fairly balanced use of cpu's. I looked around on the internet and guys are doing all kinds of stuff. I don't want to screw up my desktop. My nephew is fairly computer literate and trys to help me. But windows 7 is a new ball game. I have never screwed around in the bios but if that is necessary we can get it figured out.
I was originally goiing to ask some PE7 questions but this Parking irritates me more than not knowing stuff about PE7. Forgive me for the way I have written this stuff but I am not familiar with forum etiquette. Thanks for your help.
P.S. I found this goofy thing on another post when you changed to this new forum about the mouse movement and cpu usage going up. True. If I spin my mouse around in an Adobe window the cpu usage goes up to 10-15% sometimes.Nealeh,
Thanks for your suggestion. I read the other post you suggested and it seems Steve had the same frustration watching only 2 of the processors doing all the work. I dont think this is unique. Curious if XP has the same problem as Vista and Win 7.
I did play around with some video. Not as intense as you guys I am sure but I am doing basic video. Get it in and out the other end as a DVD. But I tried something that maybe you could try with your Quad and see what happens. I deal mostly with SD mpeg (.mpg) from my Sony camcorder. I opened up a new project in PE7 and imported 20+ files and then inserted each one to the timelline as quick as I could so they would get backed up waiting to get on the timeline. I got all of the cores to kick in but the total cpu usage was only 50%.
Also I have been converting old Disney movies from VHS through a Pyro AV Link 557. I like simple so I take the AVI and stuff it into Windows DVD Maker, one long 16 GB file or more. I select some text and push burn. Gives about 12 little motion memu buttons automatically. Process to start of DVD burn is 12-14 minutes. I burn them slow so I didn't count that time. I didn't do realtime but tried normal and high options. Didn't kick in all of the cores but the ones that did were parking in and out like crazy. I was not impressed with that. I would think once they kicked in they would stay in but not. Total CPU usage was still only 30-40%
I guess I will have to keep checking on the gamer sites. They seem to be working on the problem. World of Warcraft (WOW) has something built into the program if I read correctly where they can change the Processor Affinity Mask (CONFIG.wtf) but I have trouble following what they are talking about. I don't know if this can be found in Vista or Win7.
Thanks for your response. My graphics card is a GF8400GS. It was supposed to come with EN8400. This one is better? -
All sorts of glitches with VW Palm Pixi Plus
Hello,
I am curious if there is something inherently wrong with my phone, or if these are glitches within WebOS itself.
I have had all sorts of glitches happen over the past month or so and some are quite an issue, especially when I really need the phone.
Some of the glitches I can remember are as follow:
1. Music player cause the phone to freeze when I clicked on a song. Had to reset
2. I attempted to open google maps many times last night, when it would say I don't have an internet connection, even though the 3G logo was in the upper right corner. I had to do a reset. This was a major issue since I really needed directions at the time.
3. All the settings and SSID name info and passphrase in the Mobile Hotspot app disappeared last night and I had to reinput it all.
4. Sometimes I notice the phone is automatically restarting. This happened manny times when I first received the phone, but VW gave me a new battery, which fixed it. This feels more like a software issue now because it does it when it is just sitting on my desk.
5. One day, I could make phone calls but I could not hear anything coming out of the speaker and later, the recipient informed me they could not hear me, even though the call connected. I tried, at the time to do a restart, which did not fix the issue. I then did a **bleep** down and removed the battery, which did not work. I did a battery swap (put the battery back in) a second time and finally the phone began working again.
6. This has happened two times now, which is actually pretty creepy. One day the phone received a called and I heard this weird mid-pitch woo sound come out of the speaker. I did not know what was making the noise when I realized what it was, my phone was trying to ring. I picked up the call and was able to talk. This also happened yesterday in one of my classes where the phone was on vibrate (the vibrate switch was on), and I was connected to the Mobile Hotspot app. Out of nowhere, I began receiving a phone call and this same eery noise came out of it. I was under the impression when using the mobile hotspot, I would not be able to receive calls. The noise was piercing and odd, and I had to hit ignore, where the caller left a voicemail. Now, when in a situation where I cannot have my phone ring, this concerns me because the phone has a mind of its own. Additionally, I do not want to turn my phone off all the time to avoid ringtones, because it takes WebOS almost 3-4 minutes to boot up on the pixi, probably because it has a slow processor.
7. There has been numerous issues with using my bluetooth headphones (A2DP). Sometimes when I connect the headphones and turn on the bluetooth on the phone, they connect fine, but I cannot hear any sound from the headphones nor the speaker on the phone. Sometimes after I have been on a call using the headphones as a bluetooth headset, when I go back to the music, I cannot play music at all on the headphones.
Overall, I feel these glitches are worth it because I think WebOS is far superiour to Android, and I think it is a great product, but these issues are starting to become an inconviense and I am not sure how to proceed. I know the phone may be under warranty, so I may need to call Palm, but I figured I would reach out here first and get a concensus of the issues to see if it is something I can resolve on my side first.
I am running the latest OS, which I think is 1.4.5, which I updated a few weeks ago. Some of the issues above happened before the update and some after.
Thank you for all your help,
Tim
Post relates to: Pixi Plus p121vzw (Verizon)I appreciate the help.
Another issue I forgot to mention was with the email client. With my gmail account, it only shows 5-10 emails but I can keep scrolling like there is more emails. Additionally, I can actually click on the empty spaces and emails will show up. It is like the title and email info are not being shown in the preview (inbox) window. The irony is I also have a school account, which is hosted by gmail with a different domain, but all the emails show up fine. I even deleted the gmail account and re-imported it and the contacts, and the problem persists.
Regardless though, last night a new issue began. My vibrate ringer switch is malfunctioning. What is happening is when I turn on the ringer (put the switch in the off position), the switch does not fully close, where the ringer turns on for a second and then the vibrate goes back on. Even though the switch is in the up position, the switch is not closing all the way to close the circuit.
I took the case off and you can clearly see it is not catching in the lock position, or the spring is not pushing it up far enough to hold it in.
I admit, webOS is far superior than Android (I used a Droid for 6 months) but the build quality and glitches are quite a concern. I really hope they come out with some new hardware soon, because I am not sure how long I can go before I give up this pixi. I would not mind the pre, but I have read more horror stories regarding hardware. With HP now owning Palm, I am sure the hardware quality will increase and the palm universe will expand, minimizing software glitches because more users means more revenue, and more revenue means more staff programmers working on issues.
I can sort of get by webOS's shortcoming, but the hardware has to be there for me. This sucks because I am left with little options at this point (I do not want to go back to Android and who knows if the iPhone will ever come to VW, also, I am not in the mood to take on another platform as windows is in the midst of working on).
Thank you again! -
Recently my MacBook Pro has been freezing and showing bad graphical glitches. Multiple restarts eventually fix it and a couple of times the three tones break, three tones break warning has occurred on start up. From what I can find this is usually a RAM error but after doing a hardware check I get the response all is OK. This still happens after the check and I am unsure what the problem could be. Can anyone help? Could it be a memory issue, a hard drive issue, Graphics card issue (drivers are up to date) or is something up with the software. I also have a Bootcamp partition running Windows 7 too and this is a problem that presents itself there too.
Most likely to be RAM:
Beeps on startup:
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images.
5 beeps = processor is not usable
http://support.apple.com/kb/HT2538
I would suggest you take it to an Apple Store for a free diagnostic. -
Macbook pro early 2011 - overheat and crash with blue screen and glitches
Hi
since last wednesday my MBP has started to freeze and then crash with bluescreen, glitches and so on...
Most of the time doesnt not restart with any command as is overheating as well.
I did a clean installation on friday night and i am now running mavericks and then again on sunday it start with all the above issue. At the moment i am able to restart only if i reset NVRAM each time, which i do not think is really safe to do it everytime.
i also tried
Macs Fan Control
gfxCardStatus
to fix but they doesn't help.
I read many customers are now experiencing similar problems with this mac as the GPU Amd is faulty.
APPLE SHOULD RECALL AND REPLACE IT or will lose many custumers
I am now waiting to be seen at Genius bar on sunday, however i read about etrecheck in this related post
http:/https://discussions.apple.com/thread/5081857?start=0&tstart=0
and meanwhile i want to hear your opinion...
Looking forward
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:13:20
Disk Information:
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 499,25 GB (455,18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Microsoft Microsoft Notebook Receiver v2.0
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.genieoinnovation.macextension.client.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.torch.update.agent.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.genieoinnovation.macextension.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
User Login Items:
iTunesHelper
Macs Fan Control
gfxCardStatus
BetterSnapTool
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
None
Bad Fonts:
None
Old Applications:
None
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 41.04 GB
Destinations:
Backup di Time Machine [Local] (Last used)
Total size: 297.77 GB
Total number of backups: 3
Oldest backup: 2014-02-04 20:47:26 +0000
Last backup: 2014-02-08 20:21:58 +0000
Size of backup disk: Adequate
Backup size 297.77 GB > (Disk used 41.04 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
16% mds
3% WindowServer
1% EtreCheck
0% MacsFanControl
0% SystemUIServer
Top Processes by Memory:
508 MB firefox
106 MB com.apple.IconServicesAgent
66 MB mds_stores
57 MB Finder
57 MB WindowServer
Virtual Memory Information:
5.25 GB Free RAM
1.25 GB Active RAM
395 MB Inactive RAM
1.11 GB Wired RAM
257 MB Page-ins
0 B Page-outsHi, sorry but my mac is early 2011 not 2010...
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM
i don't have the disable graphic switching options in the energy saving preferences...
i am using mavericks now.
about this VST how can i check or who can check it?
And this last kernel:
Anonymous UUID:
3068FDF2-8835-F87B-3AC0-A00C76A699D9
Sun Feb 9 14:53:24 2014
panic(cpu 2 caller 0xffffff80280dc19e): Kernel trap at 0xffffff7fa9efefc1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8148564428, CR3: 0x000000002ac24000, CR4: 0x00000000000606e0
RAX: 0x0000000080000000, RBX: 0x000000000000150a, RCX: 0xffffff815c72bcc0, RDX: 0x000000000000150a
RSP: 0xffffff815c72bc10, RBP: 0xffffff815c72bc30, RSI: 0xffffff814855f000, RDI: 0xffffff803c4b5c00
R8: 0xffffff815c72bcc0, R9: 0xffffff810aa84ce8, R10: 0xffffff815c72b900, R11: 0x0000000000000000
R12: 0x000000000000000f, R13: 0xffffff803b447e00, R14: 0xffffff814855f000, R15: 0xffffff803c4b5c00
RFL: 0x0000000000010206, RIP: 0xffffff7fa9efefc1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8148564428, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff815c72b8a0 : 0xffffff8028022f69
0xffffff815c72b920 : 0xffffff80280dc19e
0xffffff815c72baf0 : 0xffffff80280f3606
0xffffff815c72bb10 : 0xffffff7fa9efefc1
0xffffff815c72bc30 : 0xffffff7fa9ef835e
0xffffff815c72bc90 : 0xffffff7fa9f0bab6
0xffffff815c72bcb0 : 0xffffff7fa9ebc148
0xffffff815c72bd10 : 0xffffff7fa9ebc189
0xffffff815c72bd30 : 0xffffff7fa9e5b4b1
0xffffff815c72bd60 : 0xffffff7fa9e62a57
0xffffff815c72bd80 : 0xffffff7fa9e6730d
0xffffff815c72bdf0 : 0xffffff7fa9e5f094
0xffffff815c72be10 : 0xffffff7fa9e5d62c
0xffffff815c72be50 : 0xffffff7fa9e5d4b4
0xffffff815c72be90 : 0xffffff7fa9e5c67c
0xffffff815c72beb0 : 0xffffff7fa9e7af5a
0xffffff815c72bef0 : 0xffffff80284ada80
0xffffff815c72bf30 : 0xffffff80284ac522
0xffffff815c72bf80 : 0xffffff80284ac5f7
0xffffff815c72bfb0 : 0xffffff80280d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C5 ]@0xffffff7fa9e53000->0xffffff7fa9eabfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7fa86ba000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7fa8ed7000
com.apple.AMDRadeonX3000(1.1.4)[4333F950-8969-31AB-93E2-DF7D2DE76A9F]@0xffffff7f a9eb8000->0xffffff7faa258fff
dependency: com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C 5]@0xffffff7fa9e53000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7fa86ba000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7fa8ed7000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x0000000027e00000
Kernel text base: 0xffffff8028000000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 19122777411521
last loaded kext at 7525516373620: com.apple.filesystems.smbfs
2.0.0 (addr 0xffffff7faa5db000, size 335872)
last unloaded kext at 4160298711302: com.apple.driver.AppleUSBCDC
4.2.1b2 (addr 0xffffff7faa5c9000, size 16384)
loaded kexts:
com.apple.filesystems.smbfs
2.0.0
com.apple.filesystems.msdosfs
1.9
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AGPM
100.14.11
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager
4.2.0f6
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.driver.AppleIntelHD3000Graphics
8.1.8
com.apple.driver.AppleMikeyDriver
2.5.3fc1
com.apple.kext.AMDFramebuffer
1.1.4
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleSMCPDRC
1.0.0
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleIntelSNBGraphicsFB
8.1.8
com.apple.driver.AppleMuxControl
3.4.12
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleLPC
1.7.0
com.apple.AMDRadeonX3000
1.1.4
com.apple.kext.AMD6000Controller
1.1.4
com.apple.driver.AppleThunderboltIP
1.0.10
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleIRController
325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.iokit.SCSITaskUserClient
3.6.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.4.0
com.apple.driver.AppleUSBHub
650.4.4
com.apple.driver.AppleSDXC
1.4.0
com.apple.iokit.AppleBCM5701Ethernet
3.6.9b9
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AppleAHCIPort
2.9.5
com.apple.driver.AppleUSBEHCI
650.4.1
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.0
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.5.3fc1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.4fc11
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOSurface
91
com.apple.iokit.IOBluetoothFamily
4.2.0f6
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleHDAController
2.5.3fc1
com.apple.iokit.IOHDAFamily
2.5.3fc1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.iokit.IONDRVSupport
2.3.6
com.apple.driver.AppleGraphicsControl
3.4.12
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOFireWireIP
2.2.5
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.5.1d27
com.apple.driver.AppleSMC
3.1.6d1
com.apple.iokit.IOAcceleratorFamily
98.7.1
com.apple.kext.AMDSupport
1.1.4
com.apple.AppleGraphicsDeviceControl
3.4.12
com.apple.iokit.IOGraphicsFamily
2.3.6
com.apple.driver.AppleThunderboltDPInAdapter
2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily
2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter
1.4.0
com.apple.driver.AppleUSBMultitouch
240.6
com.apple.iokit.IOUSBHIDDriver
650.4.4
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.0
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.0
com.apple.driver.AppleThunderboltNHI
1.9.2
com.apple.iokit.IOThunderboltFamily
2.8.5
com.apple.iokit.IOUSBUserClient
650.4.4
com.apple.iokit.IOEthernetAVBController
1.0.3b3
com.apple.driver.mDNSOffloadUserClient
1.0.1b4
com.apple.iokit.IO80211Family
600.34
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOAHCIFamily
2.6.0
com.apple.iokit.IOUSBFamily
650.4.4
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.10
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
21
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.8
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
System Profile:
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034302E4130314C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034302E4130314C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9A302, 500,11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Microsoft Notebook Receiver v2.0
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Cruzer Blade
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1 -
Hi,
I've got an a64400 + discrete graphic, i have got some glitches with my setup and i didn't find a way to stop this.
A video of the glitches:
http://youtu.be/ykNpmVOvNv0
Things maybe related: i've got a 0 size iommu aperture (cfr dmesg), dunno how to change thanks to the damn insyde bios.
my setup:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013
[ 0.000000] Command line: ro root=/dev/sda5 radeon.dpm=1 initrd=initramfs-linux.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af2befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af2bf000-0x00000000afabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afabf000-0x00000000afbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afbbf000-0x00000000afbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afbff000-0x00000000afbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001aeffffff] usable
[ 0.000000] e820: update [mem 0xa5c73018-0xa5c82a57] usable ==> usable
[ 0.000000] e820: update [mem 0xa5c63018-0xa5c72857] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a5c63017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a5c63018-0x00000000a5c72857] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a5c72858-0x00000000a5c73017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a5c73018-0x00000000a5c82a57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a5c82a58-0x00000000af2befff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000af2bf000-0x00000000afabefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000afabf000-0x00000000afbbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000afbbf000-0x00000000afbfefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000afbff000-0x00000000afbfffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000afc00000-0x00000000cfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001aeffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xafbfe000 ACPI 2.0=0xafbfe014 SMBIOS=0xafabef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000008000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem06: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[ 0.000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006e000) (0MB)
[ 0.000000] efi: mem08: type=10, attr=0xf, range=[0x000000000006e000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem09: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem10: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
[ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f4f000) (15MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000001f4f000-0x000000007fdd2000) (2014MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000007fdd2000-0x0000000080000000) (2MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000080000000-0x00000000a38c0000) (568MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000a38c0000-0x00000000a38e0000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000a38e0000-0x00000000a5c63000) (35MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x00000000a5c63000-0x00000000a5c83000) (0MB)
[ 0.000000] efi: mem20: type=1, attr=0xf, range=[0x00000000a5c83000-0x00000000a602f000) (3MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000a602f000-0x00000000a68bc000) (8MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000a68bc000-0x00000000a68be000) (0MB)
[ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x00000000a68be000-0x00000000a68bf000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000a68bf000-0x00000000a6a98000) (1MB)
[ 0.000000] efi: mem25: type=1, attr=0xf, range=[0x00000000a6a98000-0x00000000a6abf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000a6abf000-0x00000000ab6fa000) (76MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000ab6fa000-0x00000000ac39d000) (12MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000ac39d000-0x00000000ac3bd000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000ac3bd000-0x00000000ac7be000) (4MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000ac7be000-0x00000000acabf000) (3MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000acabf000-0x00000000acac2000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000acac2000-0x00000000acac6000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000acac6000-0x00000000acaca000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000acaca000-0x00000000acc73000) (1MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000acc73000-0x00000000acc7e000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000acc7e000-0x00000000acc97000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000acc97000-0x00000000accee000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000accee000-0x00000000accf2000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000accf2000-0x00000000acdcb000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x00000000acdcb000-0x00000000acdcd000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000acdcd000-0x00000000acefd000) (1MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x00000000acefd000-0x00000000aceff000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000aceff000-0x00000000acf10000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x00000000acf10000-0x00000000acf12000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000acf12000-0x00000000ad0cf000) (1MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x00000000ad0cf000-0x00000000ad0d1000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000ad0d1000-0x00000000ad0d4000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x00000000ad0d4000-0x00000000ad0d6000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000ad0d6000-0x00000000aeabf000) (25MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x00000000aeabf000-0x00000000aeef6000) (4MB)
[ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x00000000aeef6000-0x00000000af2bf000) (3MB)
[ 0.000000] efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000af2bf000-0x00000000af5dd000) (3MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000af5dd000-0x00000000af6bf000) (0MB)
[ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000af6bf000-0x00000000af765000) (0MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x00000000af765000-0x00000000af8bf000) (1MB)
[ 0.000000] efi: mem56: type=0, attr=0xf, range=[0x00000000af8bf000-0x00000000afa65000) (1MB)
[ 0.000000] efi: mem57: type=0, attr=0xf, range=[0x00000000afa65000-0x00000000afabf000) (0MB)
[ 0.000000] efi: mem58: type=10, attr=0xf, range=[0x00000000afabf000-0x00000000afb54000) (0MB)
[ 0.000000] efi: mem59: type=10, attr=0xf, range=[0x00000000afb54000-0x00000000afbbf000) (0MB)
[ 0.000000] efi: mem60: type=9, attr=0xf, range=[0x00000000afbbf000-0x00000000afbdb000) (0MB)
[ 0.000000] efi: mem61: type=9, attr=0xf, range=[0x00000000afbdb000-0x00000000afbff000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x00000000afbff000-0x00000000afc00000) (0MB)
[ 0.000000] efi: mem63: type=7, attr=0xf, range=[0x0000000100000000-0x00000001af000000) (2800MB)
[ 0.000000] efi: mem64: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem65: type=0, attr=0x0, range=[0x00000000afc00000-0x00000000d0000000) (516MB)
[ 0.000000] efi: mem66: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem67: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem68: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem70: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem71: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc31000) (0MB)
[ 0.000000] efi: mem72: type=11, attr=0x8000000000000000, range=[0x00000000ffc31000-0x00000000ffc61000) (0MB)
[ 0.000000] efi: mem73: type=11, attr=0x8000000000000000, range=[0x00000000ffc61000-0x0000000100000000) (3MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/184A, BIOS F.27 04/12/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000AFBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 4 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001af000000 aka 6896M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xafc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000028000] 28000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b2d000, 0x02b2dfff] PGTABLE
[ 0.000000] BRK [0x02b2e000, 0x02b2efff] PGTABLE
[ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1aee00000-0x1aeffffff]
[ 0.000000] [mem 0x1aee00000-0x1aeffffff] page 2M
[ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ac000000-0x1aedfffff]
[ 0.000000] [mem 0x1ac000000-0x1aedfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
[ 0.000000] [mem 0x180000000-0x1abffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xaf2befff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xaf1fffff] page 2M
[ 0.000000] [mem 0xaf200000-0xaf2befff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xafbff000-0xafbfffff]
[ 0.000000] [mem 0xafbff000-0xafbfffff] page 4k
[ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fdd2000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000afbfe014 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000afbfe120 00094 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 00000000afbfc000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 00000000afbe5000 1235D (v01 HPQOEM 184A F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000afb7a000 00040
[ 0.000000] ACPI: UEFI 00000000afbfd000 00236 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 00000000afbfb000 00038 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 00000000afbfa000 00084 (v03 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 00000000afbf9000 0003C (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 00000000afbf8000 000A5 (v32 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: BOOT 00000000afbe4000 00028 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: WDRT 00000000afbe3000 00047 (v01 HPQOEM 184A 00000000 HP 00040000)
[ 0.000000] ACPI: WDAT 00000000afbe2000 001AC (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 00000000afbe0000 00044 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 00000000afbdf000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 00000000afbde000 005E0 (v01 HPQOEM 184A 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000afbdc000 01ECC (v02 HPQOEM 184A 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 00000000afbdb000 00038 (v01 HPQOEM 184A 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001aeffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1aeffffff]
[ 0.000000] NODE_DATA [mem 0x1aeff9000-0x1aeffdfff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8e00000-ffff8801ae5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1aeffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006dfff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0xaf2befff]
[ 0.000000] node 0: [mem 0xafbff000-0xafbfffff]
[ 0.000000] node 0: [mem 0x100000000-0x1aeffffff]
[ 0.000000] On node 0 totalpages: 1434181
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1133 pages reserved
[ 0.000000] DMA zone: 3973 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11147 pages used for memmap
[ 0.000000] DMA32 zone: 713408 pages, LIFO batch:31
[ 0.000000] Normal zone: 11200 pages used for memmap
[ 0.000000] Normal zone: 716800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa5c63000-0xa5c63fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa5c72000-0xa5c72fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa5c73000-0xa5c73fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa5c82000-0xa5c82fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf2bf000-0xafabefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafabf000-0xafbbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafbbf000-0xafbfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafc00000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801aec00000 s86528 r8192 d24064 u524288
[ 0.000000] pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1410637
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=/dev/sda5 radeon.dpm=1 initrd=initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 9c000000
[ 0.000000] PM: Registered nosave memory: [mem 0x9c000000-0x9fffffff]
[ 0.000000] Memory: 5435220K/5736724K available (5045K kernel code, 795K rwdata, 1696K rodata, 1140K init, 1284K bss, 301504K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 23068672 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2694.759 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5391.08 BogoMIPS (lpj=8982530)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000029] init_memory_mapping: [mem 0xaf2bf000-0xaf6befff]
[ 0.000031] [mem 0xaf2bf000-0xaf3fffff] page 4k
[ 0.000032] [mem 0xaf400000-0xaf5fffff] page 2M
[ 0.000034] [mem 0xaf600000-0xaf6befff] page 4k
[ 0.000057] init_memory_mapping: [mem 0xaf6bf000-0xaf8befff]
[ 0.000059] [mem 0xaf6bf000-0xaf8befff] page 4k
[ 0.010898] Security Framework initialized
[ 0.010914] AppArmor: AppArmor disabled by boot time parameter
[ 0.010915] Yama: becoming mindful.
[ 0.011491] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014227] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015453] Mount-cache hash table entries: 256
[ 0.015652] Initializing cgroup subsys memory
[ 0.015665] Initializing cgroup subsys devices
[ 0.015667] Initializing cgroup subsys freezer
[ 0.015669] Initializing cgroup subsys net_cls
[ 0.015670] Initializing cgroup subsys blkio
[ 0.015688] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[ 0.015692] tseg: 00afc00000
[ 0.015695] CPU: Physical Processor ID: 0
[ 0.015696] CPU: Processor Core ID: 0
[ 0.015697] mce: CPU supports 7 MCE banks
[ 0.015708] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
[ 0.015810] Freeing SMP alternatives memory: 20K (ffffffff819e5000 - ffffffff819ea000)
[ 0.016617] ACPI: Core revision 20130517
[ 0.022966] ACPI: All ACPI Tables successfully acquired
[ 0.031591] ftrace: allocating 20088 entries in 79 pages
[ 0.039156] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072163] smpboot: CPU0: AMD A6-4400M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.176194] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.176200] ... version: 0
[ 0.176201] ... bit width: 48
[ 0.176202] ... generic registers: 6
[ 0.176203] ... value mask: 0000ffffffffffff
[ 0.176204] ... max period: 00007fffffffffff
[ 0.176205] ... fixed-purpose events: 0
[ 0.176206] ... event mask: 000000000000003f
[ 0.193005] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.210790] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[ 0.199705] smpboot: Booting Node 0, Processors #1
[ 0.212936] Brought up 2 CPUs
[ 0.212942] smpboot: Total of 2 processors activated (10783.16 BogoMIPS)
[ 0.213450] devtmpfs: initialized
[ 0.214867] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[ 0.214869] PM: Registering ACPI NVS region [mem 0xafabf000-0xafbbefff] (1048576 bytes)
[ 0.215837] RTC time: 22:10:16, date: 09/21/13
[ 0.215891] NET: Registered protocol family 16
[ 0.216086] ACPI: bus type PCI registered
[ 0.216089] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.216186] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.216189] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.221803] PCI: Using configuration type 1 for base access
[ 0.222541] bio: create slab <bio-0> at 0
[ 0.222663] ACPI: Added _OSI(Module Device)
[ 0.222665] ACPI: Added _OSI(Processor Device)
[ 0.222666] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.222668] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.224936] ACPI: EC: Look up EC in DSDT
[ 0.227440] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.232085] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.318235] ACPI: Interpreter enabled
[ 0.318250] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.318255] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.318277] ACPI: (supports S0 S3 S4 S5)
[ 0.318279] ACPI: Using IOAPIC for interrupt routing
[ 0.318529] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.318690] ACPI: No dock devices found.
[ 2.271354] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.271634] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf9ff])
[ 2.271639] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 2.271800] PCI host bridge to bus 0000:00
[ 2.271802] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.271804] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.271806] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.271808] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.271810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 2.271811] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 2.271813] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 2.271815] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 2.271816] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 2.271818] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 2.271820] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 2.271821] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 2.271823] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 2.271824] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 2.271826] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 2.271828] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 2.271829] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 2.271831] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 2.271839] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 2.272014] pci 0000:00:01.0: [1002:9990] type 00 class 0x030000
[ 2.272023] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 2.272028] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 2.272033] pci 0000:00:01.0: reg 0x18: [mem 0xf0400000-0xf043ffff]
[ 2.272069] pci 0000:00:01.0: supports D1 D2
[ 2.272162] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 2.272169] pci 0000:00:01.1: reg 0x10: [mem 0xf0444000-0xf0447fff]
[ 2.272210] pci 0000:00:01.1: supports D1 D2
[ 2.272297] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 2.272339] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 2.272473] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 2.272516] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 2.272662] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 2.272682] pci 0000:00:10.0: reg 0x10: [mem 0xf0448000-0xf0449fff 64bit]
[ 2.272774] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 2.272848] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 2.272935] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 2.272954] pci 0000:00:10.1: reg 0x10: [mem 0xf044a000-0xf044bfff 64bit]
[ 2.273046] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 2.273120] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 2.273185] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 2.273201] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 2.273210] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 2.273219] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 2.273227] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 2.273235] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 2.273244] pci 0000:00:11.0: reg 0x24: [mem 0xf0450000-0xf04507ff]
[ 2.273395] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 2.273407] pci 0000:00:12.0: reg 0x10: [mem 0xf044f000-0xf044ffff]
[ 2.273511] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 2.273578] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 2.273897] pci 0000:00:12.2: reg 0x10: [mem 0xf044e000-0xf044e0ff]
[ 2.275768] pci 0000:00:12.2: supports D1 D2
[ 2.275770] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 2.275835] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 2.275885] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 2.275897] pci 0000:00:13.0: reg 0x10: [mem 0xf044d000-0xf044dfff]
[ 2.276003] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 2.276043] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 2.276366] pci 0000:00:13.2: reg 0x10: [mem 0xf044c000-0xf044c0ff]
[ 2.278239] pci 0000:00:13.2: supports D1 D2
[ 2.278241] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 2.278306] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 2.278346] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 2.278511] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 2.278529] pci 0000:00:14.2: reg 0x10: [mem 0xf0440000-0xf0443fff 64bit]
[ 2.278586] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 2.278702] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 2.278867] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 2.279010] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 2.279074] pci 0000:00:15.0: supports D1 D2
[ 2.279179] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 2.279242] pci 0000:00:15.1: supports D1 D2
[ 2.279311] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 2.279378] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 2.279469] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 2.279560] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 2.279652] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 2.279745] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 2.279834] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 2.280058] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 2.280073] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.280085] pci 0000:01:00.0: reg 0x18: [mem 0xf0300000-0xf031ffff 64bit]
[ 2.280093] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 2.280107] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 2.280142] pci 0000:01:00.0: supports D1 D2
[ 2.286312] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 2.286321] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 2.286324] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 2.286329] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.286464] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[ 2.286516] pci 0000:02:00.0: reg 0x10: [mem 0xf0200000-0xf027ffff 64bit]
[ 2.286555] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 2.286600] pci 0000:02:00.0: supports D1 D2
[ 2.286602] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.293006] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 2.293016] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 2.293134] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 2.293143] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 2.293145] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 2.293147] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 2.293149] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 2.293151] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 2.293152] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 2.293154] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 2.293156] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 2.293158] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 2.293159] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 2.293161] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 2.293162] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 2.293164] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 2.293166] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 2.293168] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 2.293169] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 2.293171] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 2.293262] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
[ 2.293282] pci 0000:04:00.0: reg 0x10: [mem 0xf0100000-0xf0100fff]
[ 2.293405] pci 0000:04:00.0: supports D1 D2
[ 2.293407] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 2.299708] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 2.299720] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 2.299869] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 2.299889] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 2.299918] pci 0000:05:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 2.299936] pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 2.300013] pci 0000:05:00.0: supports D1 D2
[ 2.300015] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.300916] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 2.306373] pci 0000:00:15.1: PCI bridge to [bus 05]
[ 2.306383] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 2.306388] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 2.306546] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 2.306818] acpi PNP0A08:00: ACPI _OSC control (0x19) granted
[ 2.307993] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.308074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.308166] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.308257] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.308334] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.308389] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.308443] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.308498] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 2.507062] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 2.507073] ACPI: \_SB_.PCI0: notify handler is installed
[ 2.507152] Found 1 acpi root devices
[ 2.507212] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 2.507306] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.507316] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.507319] vgaarb: loaded
[ 2.507320] vgaarb: bridge control possible 0000:01:00.0
[ 2.507321] vgaarb: no bridge control possible 0000:00:01.0
[ 2.507370] PCI: Using ACPI for IRQ routing
[ 2.509091] PCI: pci_cache_line_size set to 64 bytes
[ 2.509191] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[ 2.509195] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 2.509196] e820: reserve RAM buffer [mem 0xa5c63018-0xa7ffffff]
[ 2.509198] e820: reserve RAM buffer [mem 0xa5c73018-0xa7ffffff]
[ 2.509199] e820: reserve RAM buffer [mem 0xaf2bf000-0xafffffff]
[ 2.509201] e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
[ 2.509202] e820: reserve RAM buffer [mem 0x1af000000-0x1afffffff]
[ 2.509310] NetLabel: Initializing
[ 2.509311] NetLabel: domain hash size = 128
[ 2.509312] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.509325] NetLabel: unlabeled traffic allowed by default
[ 2.509369] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 2.509373] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 2.511417] Switched to clocksource hpet
[ 2.517619] pnp: PnP ACPI init
[ 2.517641] ACPI: bus type PNP registered
[ 2.517828] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.517831] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.517833] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.517835] system 00:00: [mem 0xfec10000-0xfec10fff] has been reserved
[ 2.517838] system 00:00: [mem 0xfed80000-0xfed81fff] could not be reserved
[ 2.517842] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.518141] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.518192] pnp 00:02: [dma 4]
[ 2.518216] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.518271] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.518332] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.518359] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.518427] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 2.518467] pnp 00:07: Plug and Play ACPI device, IDs SYN1e64 SYN1e00 SYN0002 PNP0f13 (active)
[ 2.518522] system 00:08: [io 0x0400-0x04cf] could not be reserved
[ 2.518524] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 2.518526] system 00:08: [io 0x04d6] has been reserved
[ 2.518528] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 2.518530] system 00:08: [io 0x077a] has been reserved
[ 2.518532] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 2.518534] system 00:08: [io 0x0c14] has been reserved
[ 2.518536] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 2.518538] system 00:08: [io 0x0c6c] has been reserved
[ 2.518540] system 00:08: [io 0x0c6f] has been reserved
[ 2.518541] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 2.518543] system 00:08: [io 0x0840-0x0847] has been reserved
[ 2.518545] system 00:08: [io 0x0380-0x0387] has been reserved
[ 2.518548] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.518634] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 2.518636] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
[ 2.518639] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.519013] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 2.719024] pnp: PnP ACPI: found 11 devices
[ 2.719029] ACPI: bus type PNP unregistered
[ 2.726270] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 2.726274] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 2.726321] pci 0000:00:04.0: BAR 15: assigned [mem 0xf0500000-0xf05fffff pref]
[ 2.726325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0320000-0xf033ffff pref]
[ 2.726328] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 2.726331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 2.726334] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 2.726337] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.726341] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0500000-0xf050ffff pref]
[ 2.726343] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 2.726346] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 2.726349] pci 0000:00:04.0: bridge window [mem 0xf0500000-0xf05fffff pref]
[ 2.726352] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 2.726387] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 2.726392] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 2.726398] pci 0000:00:15.1: PCI bridge to [bus 05]
[ 2.726401] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 2.726405] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 2.726798] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.726800] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.726802] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.726804] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 2.726805] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 2.726807] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 2.726809] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 2.726810] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 2.726812] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 2.726814] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 2.726815] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 2.726817] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 2.726818] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 2.726820] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 2.726822] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 2.726823] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 2.726825] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 2.726827] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 2.726829] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[ 2.726830] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.726832] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 2.726834] pci_bus 0000:02: resource 2 [mem 0xf0500000-0xf05fffff pref]
[ 2.726836] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 2.726837] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 2.726839] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.726841] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff]
[ 2.726842] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff]
[ 2.726844] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff]
[ 2.726845] pci_bus 0000:03: resource 10 [mem 0x000d0000-0x000d3fff]
[ 2.726847] pci_bus 0000:03: resource 11 [mem 0x000d4000-0x000d7fff]
[ 2.726849] pci_bus 0000:03: resource 12 [mem 0x000d8000-0x000dbfff]
[ 2.726850] pci_bus 0000:03: resource 13 [mem 0x000dc000-0x000dffff]
[ 2.726852] pci_bus 0000:03: resource 14 [mem 0x000e0000-0x000e3fff]
[ 2.726853] pci_bus 0000:03: resource 15 [mem 0x000e4000-0x000e7fff]
[ 2.726855] pci_bus 0000:03: resource 16 [mem 0x000e8000-0x000ebfff]
[ 2.726857] pci_bus 0000:03: resource 17 [mem 0x000ec000-0x000effff]
[ 2.726858] pci_bus 0000:03: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 2.726860] pci_bus 0000:03: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 2.726861] pci_bus 0000:03: resource 20 [mem 0xfed45000-0xffffffff]
[ 2.726863] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 2.726865] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 2.726867] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf00fffff]
[ 2.726900] NET: Registered protocol family 2
[ 2.727143] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.727497] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.727798] TCP: Hash tables configured (established 65536 bind 65536)
[ 2.727850] TCP: reno registered
[ 2.727868] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.727919] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.728041] NET: Registered protocol family 1
[ 2.728057] pci 0000:00:01.0: Boot video device
[ 2.901828] PCI: CLS 64 bytes, default 64
[ 2.901886] Unpacking initramfs...
[ 3.243466] Freeing initrd memory: 2232K (ffff88007fdd2000 - ffff880080000000)
[ 3.243857] PCI-DMA: Disabling AGP.
[ 3.243859] PCI-DMA: More than 4GB of RAM and no IOMMU
falling back to iommu=soft.
[ 3.243861] More than 4GB of memory but GART IOMMU not available.
[ 3.243862] falling back to iommu=soft.
[ 3.243863] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.243866] software IO TLB [mem 0xa76fa000-0xab6fa000] (64MB) mapped at [ffff8800a76fa000-ffff8800ab6f9fff]
[ 3.243892] Simple Boot Flag at 0x44 set to 0x1
[ 3.243976] perf: AMD NB counters detected
[ 3.243987] LVT offset 0 assigned for vector 0x400
[ 3.244008] perf: AMD IBS detected (0x000000ff)
[ 3.244031] Scanning for low memory corruption every 60 seconds
[ 3.244346] audit: initializing netlink socket (disabled)
[ 3.244359] type=2000 audit(1379801418.136:1): initialized
[ 3.255574] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.257204] zbud: loaded
[ 3.257379] VFS: Disk quotas dquot_6.5.2
[ 3.257424] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.257670] msgmni has been set to 10747
[ 3.257910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.257945] io scheduler noop registered
[ 3.257947] io scheduler deadline registered
[ 3.257975] io scheduler cfq registered (default)
[ 3.258083] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 3.258318] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.258371] pciehp 0000:00:02.0:pcie04: HPC vendor_id 1022 device_id 1412 ss_vid 1022 ss_did 1234
[ 3.258419] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 3.258424] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.258532] efifb: probing for efifb
[ 3.258917] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90009400000, using 4224k, total 4224k
[ 3.258919] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 3.258920] efifb: scrolling: redraw
[ 3.258922] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.261417] Console: switching to colour frame buffer device 170x48
[ 3.263800] fb0: EFI VGA frame buffer device
[ 3.263837] GHES: HEST is not enabled!
[ 3.263949] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.264473] Linux agpgart interface v0.103
[ 3.264546] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.271506] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.271544] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.271671] mousedev: PS/2 mouse device common for all mice
[ 3.271727] rtc_cmos 00:04: RTC can wake from S4
[ 3.271846] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.271868] rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs
[ 3.271876] cpuidle: using governor ladder
[ 3.271878] cpuidle: using governor menu
[ 3.271942] drop_monitor: Initializing network drop monitor service
[ 3.272001] TCP: cubic registered
[ 3.272099] NET: Registered protocol family 10
[ 3.272264] NET: Registered protocol family 17
[ 3.272275] Key type dns_resolver registered
[ 3.272574] PM: Hibernation image not present or could not be loaded.
[ 3.272590] registered taskstats version 1
[ 3.273511] Magic number: 13:547:199
[ 3.273577] rtc_cmos 00:04: setting system clock to 2013-09-21 22:10:19 UTC (1379801419)
[ 3.274633] Freeing unused kernel memory: 1140K (ffffffff818c8000 - ffffffff819e5000)
[ 3.274636] Write protecting the kernel read-only data: 8192k
[ 3.277811] Freeing unused kernel memory: 1088K (ffff8800024f0000 - ffff880002600000)
[ 3.278957] Freeing unused kernel memory: 352K (ffff8800027a8000 - ffff880002800000)
[ 3.287463] systemd-udevd[44]: starting version 204
[ 3.290274] SCSI subsystem initialized
[ 3.291735] ACPI: bus type ATA registered
[ 3.292172] libata version 3.00 loaded.
[ 3.292954] ahci 0000:00:11.0: version 3.0
[ 3.293195] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[ 3.293261] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.293265] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 3.294052] scsi0 : ahci
[ 3.294500] scsi1 : ahci
[ 3.294670] ata1: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450100 irq 41
[ 3.294674] ata2: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450180 irq 41
[ 3.345800] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.778364] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.779159] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[ 3.779163] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.779589] ata1.00: configured for UDMA/133
[ 3.779737] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
[ 3.780734] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.780823] sd 0:0:0:0: [sda] Write Protect is off
[ 3.780826] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.780852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.781582] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.782740] sda: sda1 sda2 sda3 sda4 sda5
[ 3.783296] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.896346] ata2.00: ATA-8: TOSHIBA MQ01ABD050, AX001C, max UDMA/100
[ 3.896350] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.898249] ata2.00: configured for UDMA/100
[ 3.898410] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 AX00 PQ: 0 ANSI: 5
[ 3.898654] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.898658] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.898725] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.898728] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.898753] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.944387] sdb: sdb1 sdb3 sdb4 sdb5
[ 3.944925] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.993597] ACPI: bus type USB registered
[ 3.993635] usbcore: registered new interface driver usbfs
[ 3.993647] usbcore: registered new interface driver hub
[ 3.994768] rtsx_pci 0000:04:00.0: irq 42 for MSI/MSI-X
[ 3.994786] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 3.995459] usbcore: registered new device driver usb
[ 3.996028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.996220] ehci-pci: EHCI PCI platform driver
[ 3.996395] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.996403] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.996418] QUIRK: Enable AMD PLL fix
[ 3.996420] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.996430] ehci-pci 0000:00:12.2: debug port 1
[ 3.996469] ehci-pci 0000:00:12.2: irq 17, io mem 0xf044e000
[ 3.997220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.997692] ohci-pci: OHCI PCI platform driver
[ 4.009615] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.010131] hub 1-0:1.0: USB hub found
[ 4.010139] hub 1-0:1.0: 5 ports detected
[ 4.010715] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.010725] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.010732] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.010744] ehci-pci 0000:00:13.2: debug port 1
[ 4.010778] ehci-pci 0000:00:13.2: irq 17, io mem 0xf044c000
[ 4.018234] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.018410] hub 2-0:1.0: USB hub found
[ 4.018418] hub 2-0:1.0: 5 ports detected
[ 4.020537] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.020548] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 4.020791] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 4.020798] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 4.020805] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 4.021039] xHCI xhci_add_endpoint called for root hub
[ 4.021041] xHCI xhci_check_bandwidth called for root hub
[ 4.021078] hub 3-0:1.0: USB hub found
[ 4.021142] hub 3-0:1.0: 2 ports detected
[ 4.021311] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.021317] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 4.024418] xHCI xhci_add_endpoint called for root hub
[ 4.024421] xHCI xhci_check_bandwidth called for root hub
[ 4.024457] hub 4-0:1.0: USB hub found
[ 4.024465] hub 4-0:1.0: 2 ports detected
[ 4.035271] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 4.035286] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[ 4.035499] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
[ 4.035505] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 4.035509] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 4.035716] xHCI xhci_add_endpoint called for root hub
[ 4.035718] xHCI xhci_check_bandwidth called for root hub
[ 4.035745] hub 5-0:1.0: USB hub found
[ 4.035752] hub 5-0:1.0: 2 ports detected
[ 4.035860] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 4.035864] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[ 4.039011] xHCI xhci_add_endpoint called for root hub
[ 4.039014] xHCI xhci_check_bandwidth called for root hub
[ 4.039045] hub 6-0:1.0: USB hub found
[ 4.039053] hub 6-0:1.0: 2 ports detected
[ 4.051908] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 4.051918] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
[ 4.051953] ohci-pci 0000:00:12.0: irq 18, io mem 0xf044f000
[ 4.109256] hub 7-0:1.0: USB hub found
[ 4.109265] hub 7-0:1.0: 5 ports detected
[ 4.109560] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 4.109567] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 4.109583] ohci-pci 0000:00:13.0: irq 18, io mem 0xf044d000
[ 4.165952] hub 8-0:1.0: USB hub found
[ 4.165961] hub 8-0:1.0: 5 ports detected
[ 4.245059] tsc: Refined TSC clocksource calibration: 2694.963 MHz
[ 4.315074] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 5.245193] Switched to clocksource tsc
[ 5.437707] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: (null)
[ 5.518299] systemd[1]: systemd 207 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.519172] systemd[1]: Set hostname to <ariel>.
[ 5.606864] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.606918] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.606930] systemd[1]: Starting Remote File Systems.
[ 5.607030] systemd[1]: Reached target Remote File Systems.
[ 5.607039] systemd[1]: Expecting device sys-subsystem-net-devices-interface.device...
[ 5.607107] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.607190] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.607198] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.607280] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.607288] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.607369] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.607377] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.607456] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.607466] systemd[1]: Starting Encrypted Volumes.
[ 5.607526] systemd[1]: Reached target Encrypted Volumes.
[ 5.607557] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.607727] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.607741] systemd[1]: Starting udev Kernel Socket.
[ 5.607812] systemd[1]: Listening on udev Kernel Socket.
[ 5.607822] systemd[1]: Starting udev Control Socket.
[ 5.607893] systemd[1]: Listening on udev Control Socket.
[ 5.607905] systemd[1]: Starting Journal Socket.
[ 5.607996] systemd[1]: Listening on Journal Socket.
[ 5.608016] systemd[1]: Mounting Huge Pages File System...
[ 5.608721] systemd[1]: Starting udev Coldplug all Devices...
[ 5.609369] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.610459] systemd[1]: Starting Setup Virtual Console...
[ 5.613252] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.613285] systemd[1]: Mounting Debug File System...
[ 5.617698] systemd[1]: Starting Apply Kernel Variables...
[ 5.619881] systemd[1]: Starting Load Kernel Modules...
[ 5.620592] systemd[1]: Starting Journal Service...
[ 5.621394] systemd[1]: Started Journal Service.
[ 5.635858] systemd-journald[107]: Vacuuming done, freed 0 bytes
[ 5.643226] FS-Cache: Loaded
[ 5.651505] RPC: Registered named UNIX socket transport module.
[ 5.651510] RPC: Registered udp transport module.
[ 5.651512] RPC: Registered tcp transport module.
[ 5.651514] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.661201] FS-Cache: Netfs 'nfs' registered for caching
[ 5.706956] EXT4-fs (sda5): re-mounted. Opts: data=writeback,discard
[ 5.721576] systemd-udevd[133]: starting version 207
[ 5.764852] ACPI: acpi_idle registered with cpuidle
[ 5.767238] acpi-cpufreq: overriding BIOS provided _PSD data
[ 5.769784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.778422] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.778432] ACPI: Power Button [PWRB]
[ 5.786903] acpi device:01: registered as cooling_device2
[ 5.786959] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.787016] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 5.788018] hp_accel: laptop model unknown, using default axes configuration
[ 5.795206] acpi device:07: registered as cooling_device3
[ 5.795261] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 5.795316] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input3
[ 5.796421] [drm] Initialized drm 1.1.0 20060810
[ 5.799494] lis3lv02d: 8 bits 3DC sensor found
[ 5.838505] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input4
[ 5.855346] hda-intel 0000:00:01.1: Force to non-snoop mode
[ 5.855411] snd_hda_intel 0000:00:01.1: irq 49 for MSI/MSI-X
[ 5.872448] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 5.876045] [drm] radeon kernel modesetting enabled.
[ 5.878467] VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[ 5.881991] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.881995] ACPI: Thermal Zone [THRM] (34 C)
[ 5.903724] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 5.940000] cfg80211: Calling CRDA to update world regulatory domain
[ 5.942929] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 5.942992] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 5.946099] checking generic (d0000000 420000) vs hw (d0000000 10000000)
[ 5.946104] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
[ 5.946123] Console: switching to colour dummy device 80x25
[ 5.962389] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9990 0x103C:0x184A).
[ 5.962434] [drm] register mmio base: 0xF0400000
[ 5.962436] [drm] register mmio size: 262144
[ 5.963441] ATOM BIOS: HP
[ 5.963540] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 5.963544] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 5.963546] [drm] Detected VRAM RAM=512M, BAR=256M
[ 5.963548] [drm] RAM width 64bits DDR
[ 5.966336] [TTM] Zone kernel: Available graphics memory: 2752604 kiB
[ 5.966340] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 5.966342] [TTM] Initializing pool allocator
[ 5.966348] [TTM] Initializing DMA pool allocator
[ 5.966372] [drm] radeon: 512M of VRAM memory ready
[ 5.966374] [drm] radeon: 512M of GTT memory ready.
[ 5.968580] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.979866] [drm] Loading ARUBA Microcode
[ 5.991838] ACPI: AC Adapter [ACAD] (on-line)
[ 6.015785] [drm] PCIE GART of 512M enabled (table at 0x0000000000276000).
[ 6.015945] radeon 0000:00:01.0: WB enabled
[ 6.015949] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a1855c00
[ 6.016679] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc9000ac35a18
[ 6.016682] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801a1855c04
[ 6.016685] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801a1855c08
[ 6.016687] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a1855c0c
[ 6.016689] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8801a1855c10
[ 6.016692] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.016693] [drm] Driver supports precise vblank timestamp query.
[ 6.016719] radeon 0000:00:01.0: irq 50 for MSI/MSI-X
[ 6.016735] radeon 0000:00:01.0: radeon: using MSI.
[ 6.017014] [drm] radeon: irq initialized.
[ 6.025812] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20130517/dsfield-211)
[ 6.025823] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a66a1938), AE_ALREADY_EXISTS (20130517/psparse-536)
[ 6.025835] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20130517/ac-126)
[ 6.042518] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20130517/dsfield-211)
[ 6.042531] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff8801a66a1938), AE_ALREADY_EXISTS (20130517/psparse-536)
[ 6.042541] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 6.042547] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20130517/ac-126)
[ 6.099426] ath: phy0: ASPM enabled: 0x43
[ 6.099431] ath: EEPROM regdomain: 0x60
[ 6.099433] ath: EEPROM indicates we should expect a direct regpair map
[ 6.099437] ath: Country alpha2 being used: 00
[ 6.099438] ath: Regpair used: 0x60
[ 6.126376] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.126650] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc9000b300000, irq=16
[ 6.191164] [drm] ring test on 0 sucOk, let's try in a different way.
do you know which group is better suited for this problem: mesa or dri ? -
Screen Flicker and Glitch on 24" iMac, Early 2009
For a while now, my iMac has been having somewhat random display glitches, flickers, freezes, and kernel panics that can only be fixed by shutting down the computer.
Most of these screen glitches go like this: The display flickers black quickly, letting me know that an issue is going to arise. The issues that could happen are as follows:
A blue line glitch (very common)
a random artifact glitch (somewhat uncommon)
a freeze-up (very common)
a kernel panic
Let me describe these:
There are several types of "display glitches" I've been experiencing. Some of them involve random artifacts that are randomly displayed and seem to be hovering over whatever is going on on the screen–for example, once I was browsing Facebook and the glitch occurred, so a square of my browser screen was sort of cut out and stuck on the screen above everything else going on. The issue wasn't fixed until I restarted the computer. This glitch, however, wouldn't show up in screenshots. These are somewhat less common because it seems if this one happens then it either gets worse very fast and there are random pieces of my active windows all over the screen or it freezes the computer up entirely, or even results in a kernel panic.
Another "display glitch" that is far more common is a sort of line glitch. It's very strange: blue lines will outline random shapes and things all over the screen. Pictures on my browser appear distorted and videos look VERY weird. The dock has the lines and random blue pixels as well. The desktop background appears distorted. This glitch often starts with the screen flickering black and the various blue lines appearing. The lines change shape as the objects on the screen move around.The issue doesn't appear in screenshots but I documented it by taking crude videos and pictures on my phone that give examples.
Here's a link to my video of a video about a nonrelated screen glitch. I was actually searching Google for a solution but it turned out to be unhelpful, but since the screen glitch happened to be going on I decided to record it as an example. Notice how the blue lines move with the video...
Here are some pictures:
This next screenshot looks a little creepy with the armored polar bear–it's a LoL build on Mobafire. CLICK HERE TO SEE WHAT IT'S SUPPOSED TO LOOK LIKE:
---NOTE: My computer actually JUST screen glitched and froze up completely, at which point I had to shut it down and reboot. Luckily the post was saved! Just in case you were wondering how often these things occur.
This issue is getting worse and worse. I'm not sure what triggers it, but it seems like graphics-intensive programs like 3D games can trigger it–especially, it seems, when I toggle on and off fullscreen. It looks like it could be a graphics card issue, because if it was a software problem it would seem like it should show up in the screenshots. It's sort of an underwhelming graphics card, but meh. My mom is having a panic attack and backing up everything on the computer and we're thinking about just reinstalling OS X altogether.
Here's some general info about the computer:
General info:
Model Name: iMac
Model Identifier: iMac9,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.93 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Graphics and Displays:
Chipset Model: NVIDIA GeForce GT 120
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0655
Revision ID: 0x00a1
ROM Revision: 3370
Displays:
iMac:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Any help would be appreciated. I've looked for solutions for quite some time, but none of the problems people seem to be experiencing match my issue. Thanks!Lion causes your system to use more resources so it will run hotter. If you haven't cleaned you iMac's dust out:
As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
You are now in a perfect position to do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
Here is a Widget to monitor your temps and other operations:
http://islayer.com/apps/istatpro/ -
Please help with glitch in AA3.01 on 64bit Win 7 Pro/ M audio 192?
This is very frustrating and it happens irregularly but repeatedly. When recording, I sometimes get a very quick click or snap which is invisible on the waveform but can be seen in spectral view as a thin line running from top to bottom. It can be edited out, but really slows down a production!
This sound is not caused by me. It is far different from a mic 'pop.' Yes, I use a blast shield, and am about a foot from the mic. I might record 10 minutes and never hear it, or I might record ten minutes and hear it multiple times (maybe 6 to 10 times?) Interestingly, I have never seen or heard it when recording silence,
I have a new PC with WIn 7 Pro 64 bit I have 9GB ram, 2 x 1TB drives. Gigabyte GA-X-58A-UD 3R motherboard.
My card is an M audio audiophile 192. There don't appear to be new drivers beyond what I have loaded. In fact, when I load the latest driver, although it apparently loads, it does not show as such in the M Audio driver window. 5 10 0 5074 is shown, even though the driver 'says' it loaded the new one successfully.
Any and all advice is welcome. This is driving me crazy and maybe away from Audition but I love the program and don't want to replace it! Thanks!Thank you for your advice!
I use twin soundcards - one for professional audio - the other for Skype. I
have tried moving the buffer to 4096, if I recall, but it didn't help.
Latency doesn't matter to me as I record sans headphones.
I can't really shut down everything on the computer since I must have access
to email and antivirus for email while I am recording. My processor is an
i7 and I don't think there's any overclocking going on. I can't remember
what the dialog was on the M Audio driver, but I seem to recall something
about several items being updated...
Would I be better off trying to emulate a 32 bit computer within the 64 bit
environment, or does that only turn everything down to 32 bit, not just AA3?
Another odd thing is I sometimes hear this glitch on playback where it IS
NOT recorded... which I determine by playing back the audio in question
several times. If not recorded, it'll glitch at a point, then on replay,
not. When recorded, it's there in the spectral view, and each must be
edited out. It's very annoying and time consuming.
Any other ideas are welcome. I am uncomfortable with messing with the Bios
since I am not THAT technical. -
Photoshop problems with displaying white text (and glitching in general)
Hi there,
My Photoshop seems to be having some serious issues with displaying certain things, namely white text (which shows up as black), and a mix of other random elements. I've tried searching for symptoms that I've been having, but I can't seem to find anything relevant. Here is what is going on:
White text shows up as black. However, sometimes if I use blending options to give it a white Color Overlay, it will become white. Sometimes it doesn't matter, it will show up as black regardless. Other colors are not affected. I have tried changing colors back and forth. the moment I switch the color back to white, it shows up as black.
Smart objects are broken. I can still find a smart object in the Layers window, but it will just display as one of two things: nothing/transparent (but the layer inside still contains everything it used to), or the way it is supposed to look but with a huge black bar over it (or a glitch tv-error fuzz bar). I've tried taking all of the elements in the Smart Object and bringing it into the original file, but then the image looks super fuzzy-glitchy.
I've attached a screenshot of what I mean by this fuzz-glitch thing below. This example is black and white, but it can be literally any color and/or any rainbow of colors. This is what happened when I created a new 1000px x 1000px document with a white background. Notice how it isn't ENTIRELY glitchy fuzz. Only certain parts of it are covered.
Please help! Does anyone know how to solve this? I've tried restarting Photoshop, restarting my computer, changing the Advanced Graphics Processor Settings Drawing Mode from Normal to Basic, changing the amount of memory usage that I let Photoshop use (down AND up), and nothing gets fixed. The problem occurs in the middle of working on Photoshop
My computer information is as follows:
MacBook Pro (Retina, 13-inch, Early 2013) running OSX Yosemite
3 GHz Intel Core i7
8 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB
Thanks!Have you tried resetting the Type tool by right clicking here:
Have you tried resetting Preferences?
A logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created. -
ATI Radeon HD 6520G / 7600M troubles. Glitches, crashing and such.
I've been am having issues with getting my graphics card to work properly.
EDIT: tl;dr Running cinnamon with xf86-video-ati is no bueno https://dl.dropbox.com/u/7122698/bbs_ar … adface.png (other stuff happen as well, but this is the most annoying)
I was using catalyst until recently. When I deemed the glitches and the occasional crashing (which I assumed were caused by the driver) to be too much,
I decided to switch over to xf86-video-ati.
While the open source drivers seem to work, they manage to somehow corrupt pixmaps/textures and they manage to hang my computer even more often than the catalyst did.
I'm running aur/linux-lqx 3.6.4-1-lqx (as well as core/linux 3.6.5-1), extra/xf86-video-ati 1:6.14.6-2, extra/xorg-server 1.13.0-3, extra/gdm 3.6.1-2 and aur/cinnamon 1.6.4-4 . I've
also moved the damn thing to core/systemd 195-2 with sysvcompat.
I doubt that the problems are caused by gnome 3.6 having troubles with systemd or ati drivers, as I'm also having texture corruptions in opengl applications (using SDL for init stuff.)
I'm sure that there is nothing wrong with my cards, as they work fine under windows.
Right now I'm running using late kms start.
/etc/X11/ contains configs for twm, xinit and input drivers (all installed by their respective pkgs), as well as the config that I'm using right now:
/etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "UghImSoAngryNow"
Driver "radeon"
Option "NoAccel" "on"
EndSection
This is, of course, not preferable. However, it fixes nearly all the pixmap corruption problems and I haven't gotten it to die on me yet. Occasionally, my desktop background becomes
black with lines of varying (read: 50) shades of grey (aka. white noise), before it reloads itself, but haven't crashed yet.
The wiki page on ATI tells me to try and disable KMS by booting with radeon.modeset=0 or nomodeset. However, this causes Xorg to fall back to xf86-video-vesa, which
is itself quite glitchy (cursor flickers, all ttys are corrupted (unusable) except for the one I'm on, etc.)
Any help fixing this would be greatly appreciated.
(I'll see if I can post screens with the artifacts.)
Stuff nobody needs:
$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices [AMD] Hudson USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13)
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices [AMD] Hudson SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
$ cat /var/log/Xorg.0.log # With accel enabled
[ 10381.855]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10381.855] X Protocol Version 11, Revision 0
[ 10381.855] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 10381.855] Current Operating System: Linux dotfloat-asus 3.6.4-1-lqx #1 ZEN SMP PREEMPT Sun Nov 4 19:35:58 CET 2012 x86_64
[ 10381.855] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lqx root=UUID=bfd9d0cd-2be7-4539-9dc4-d273dbecbb5d ro resume=/dev/sda6 mem=4G
[ 10381.855] Build Date: 19 October 2012 03:54:56PM
[ 10381.855]
[ 10381.855] Current version of pixman: 0.26.2
[ 10381.855] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10381.855] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10381.855] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 5 22:08:35 2012
[ 10381.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10381.855] (==) No Layout section. Using the first Screen section.
[ 10381.855] (==) No screen section available. Using defaults.
[ 10381.855] (**) |-->Screen "Default Screen Section" (0)
[ 10381.855] (**) | |-->Monitor "<default monitor>"
[ 10381.855] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 10381.855] (**) | |-->Device "UghImSoAngryNow"
[ 10381.855] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10381.855] (==) Automatically adding devices
[ 10381.855] (==) Automatically enabling devices
[ 10381.856] (==) Automatically adding GPU devices
[ 10381.856] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10381.856] Entry deleted from font path.
[ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10381.856] Entry deleted from font path.
[ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10381.856] Entry deleted from font path.
[ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10381.856] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10381.856] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10381.856] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10381.856] (II) Loader magic: 0x7fcc20
[ 10381.856] (II) Module ABI versions:
[ 10381.856] X.Org ANSI C Emulation: 0.4
[ 10381.856] X.Org Video Driver: 13.0
[ 10381.856] X.Org XInput driver : 18.0
[ 10381.856] X.Org Server Extension : 7.0
[ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10381.858] (--) PCI:*(0:0:1:0) 1002:9647:1043:2122 rev 0, Mem @ 0xb0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 10381.858] (--) PCI: (0:1:0:0) 1002:6840:1043:2122 rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 10381.858] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10381.858] Initializing built-in extension Generic Event Extension
[ 10381.858] Initializing built-in extension SHAPE
[ 10381.858] Initializing built-in extension MIT-SHM
[ 10381.858] Initializing built-in extension XInputExtension
[ 10381.858] Initializing built-in extension XTEST
[ 10381.858] Initializing built-in extension BIG-REQUESTS
[ 10381.858] Initializing built-in extension SYNC
[ 10381.858] Initializing built-in extension XKEYBOARD
[ 10381.858] Initializing built-in extension XC-MISC
[ 10381.858] Initializing built-in extension SECURITY
[ 10381.858] Initializing built-in extension XINERAMA
[ 10381.858] Initializing built-in extension XFIXES
[ 10381.858] Initializing built-in extension RENDER
[ 10381.858] Initializing built-in extension RANDR
[ 10381.858] Initializing built-in extension COMPOSITE
[ 10381.858] Initializing built-in extension DAMAGE
[ 10381.858] Initializing built-in extension MIT-SCREEN-SAVER
[ 10381.858] Initializing built-in extension DOUBLE-BUFFER
[ 10381.858] Initializing built-in extension RECORD
[ 10381.858] Initializing built-in extension DPMS
[ 10381.858] Initializing built-in extension X-Resource
[ 10381.858] Initializing built-in extension XVideo
[ 10381.858] Initializing built-in extension XVideo-MotionCompensation
[ 10381.858] Initializing built-in extension XFree86-VidModeExtension
[ 10381.858] Initializing built-in extension XFree86-DGA
[ 10381.858] Initializing built-in extension XFree86-DRI
[ 10381.858] Initializing built-in extension DRI2
[ 10381.858] (II) LoadModule: "glx"
[ 10381.859] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10381.859] (II) Module glx: vendor="X.Org Foundation"
[ 10381.859] compiled for 1.13.0, module version = 1.0.0
[ 10381.859] ABI class: X.Org Server Extension, version 7.0
[ 10381.859] (==) AIGLX enabled
[ 10381.859] Loading extension GLX
[ 10381.859] (II) LoadModule: "radeon"
[ 10381.859] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 10381.859] (II) Module radeon: vendor="X.Org Foundation"
[ 10381.859] compiled for 1.13.0, module version = 6.14.6
[ 10381.859] Module class: X.Org Video Driver
[ 10381.859] ABI class: X.Org Video Driver, version 13.0
[ 10381.859] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA
[ 10381.866] (++) using VT number 1
[ 10381.867] (II) [KMS] Kernel modesetting enabled.
[ 10381.867] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10381.867] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 10381.867] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 10381.867] (==) RADEON(0): Default visual is TrueColor
[ 10381.867] (==) RADEON(0): RGB weight 888
[ 10381.867] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 10381.867] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9647)
[ 10381.867] (II) RADEON(0): PCIE card detected
[ 10381.867] (II) Loading sub module "exa"
[ 10381.867] (II) LoadModule: "exa"
[ 10381.867] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 10381.906] (II) Module exa: vendor="X.Org Foundation"
[ 10381.906] compiled for 1.13.0, module version = 2.6.0
[ 10381.906] ABI class: X.Org Video Driver, version 13.0
[ 10381.906] (II) RADEON(0): KMS Color Tiling: enabled
[ 10381.906] (II) RADEON(0): KMS Pageflipping: enabled
[ 10381.906] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 10382.004] (II) RADEON(0): Output VGA-0 has no monitor section
[ 10382.044] (II) RADEON(0): Output LVDS has no monitor section
[ 10382.108] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 10382.205] (II) RADEON(0): EDID for output VGA-0
[ 10382.245] (II) RADEON(0): EDID for output LVDS
[ 10382.245] (II) RADEON(0): Manufacturer: CMO Model: 15a7 Serial#: 0
[ 10382.245] (II) RADEON(0): Year: 2010 Week: 31
[ 10382.245] (II) RADEON(0): EDID Version: 1.3
[ 10382.245] (II) RADEON(0): Digital Display Input
[ 10382.245] (II) RADEON(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 10382.245] (II) RADEON(0): Gamma: 2.20
[ 10382.245] (II) RADEON(0): No DPMS capabilities specified
[ 10382.245] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10382.245] (II) RADEON(0): First detailed timing is preferred mode
[ 10382.245] (II) RADEON(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 10382.245] (II) RADEON(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 10382.245] (II) RADEON(0): Manufacturer's mask: 0
[ 10382.245] (II) RADEON(0): Supported detailed timing:
[ 10382.245] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 10382.245] (II) RADEON(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 10382.245] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 10382.245] (II) RADEON(0): N156BGE-L21
[ 10382.245] (II) RADEON(0): CMO
[ 10382.245] (II) RADEON(0): N156BGE-L21
[ 10382.245] (II) RADEON(0): EDID (in hex):
[ 10382.245] (II) RADEON(0): 00ffffffffffff000dafa71500000000
[ 10382.245] (II) RADEON(0): 1f140103802313780a00259e57529929
[ 10382.245] (II) RADEON(0): 15505400000001010101010101010101
[ 10382.245] (II) RADEON(0): 010101010101121b5664500014301022
[ 10382.245] (II) RADEON(0): 260058c110000018000000fe004e3135
[ 10382.245] (II) RADEON(0): 364247452d4c32310a20000000fe0043
[ 10382.245] (II) RADEON(0): 4d4f0a202020202020202020000000fe
[ 10382.245] (II) RADEON(0): 004e3135364247452d4c32310a200095
[ 10382.245] (II) RADEON(0): Printing probed modes for output LVDS
[ 10382.245] (II) RADEON(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10382.245] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 10382.245] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 10382.245] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 10382.245] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 10382.309] (II) RADEON(0): EDID for output HDMI-0
[ 10382.309] (II) RADEON(0): Output VGA-0 disconnected
[ 10382.309] (II) RADEON(0): Output LVDS connected
[ 10382.309] (II) RADEON(0): Output HDMI-0 disconnected
[ 10382.309] (II) RADEON(0): Using exact sizes for initial modes
[ 10382.309] (II) RADEON(0): Output LVDS using initial mode 1366x768
[ 10382.309] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10382.309] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 10382.309] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 10382.309] (==) RADEON(0): DPI set to (96, 96)
[ 10382.309] (II) Loading sub module "fb"
[ 10382.309] (II) LoadModule: "fb"
[ 10382.309] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10382.309] (II) Module fb: vendor="X.Org Foundation"
[ 10382.309] compiled for 1.13.0, module version = 1.0.0
[ 10382.309] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10382.309] (II) Loading sub module "ramdac"
[ 10382.309] (II) LoadModule: "ramdac"
[ 10382.309] (II) Module "ramdac" already built-in
[ 10382.309] (--) Depth 24 pixmap format is 32 bpp
[ 10382.309] (II) RADEON(0): [DRI2] Setup complete
[ 10382.309] (II) RADEON(0): [DRI2] DRI driver: r600
[ 10382.309] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 10382.309] (II) RADEON(0): Front buffer size: 4128K
[ 10382.309] (II) RADEON(0): VRAM usage limit set to 228182K
[ 10382.309] (==) RADEON(0): Backing store disabled
[ 10382.309] (II) RADEON(0): Direct rendering enabled
[ 10382.379] (II) RADEON(0): Setting EXA maxPitchBytes
[ 10382.379] (II) EXA(0): Driver allocated offscreen pixmaps
[ 10382.379] (II) EXA(0): Driver registered support for the following operations:
[ 10382.379] (II) Solid
[ 10382.379] (II) Copy
[ 10382.379] (II) Composite (RENDER acceleration)
[ 10382.379] (II) UploadToScreen
[ 10382.379] (II) DownloadFromScreen
[ 10382.379] (II) RADEON(0): Acceleration enabled
[ 10382.379] (==) RADEON(0): DPMS enabled
[ 10382.379] (==) RADEON(0): Silken mouse enabled
[ 10382.379] (II) RADEON(0): Set up textured video
[ 10382.379] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 10382.379] (II) RADEON(0): [XvMC] Extension initialized.
[ 10382.379] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10382.379] (--) RandR disabled
[ 10382.749] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 10382.749] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context
[ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 10382.749] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 10382.749] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 10382.749] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 10382.750] (II) AIGLX: Loaded and initialized r600
[ 10382.750] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10382.775] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 10382.828] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10382.828] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10382.828] (II) LoadModule: "evdev"
[ 10382.828] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10382.829] (II) Module evdev: vendor="X.Org Foundation"
[ 10382.829] compiled for 1.13.0, module version = 2.7.3
[ 10382.829] Module class: X.Org XInput Driver
[ 10382.829] ABI class: X.Org XInput driver, version 18.0
[ 10382.829] (II) Using input driver 'evdev' for 'Power Button'
[ 10382.829] (**) Power Button: always reports core events
[ 10382.829] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10382.829] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10382.829] (--) evdev: Power Button: Found keys
[ 10382.829] (II) evdev: Power Button: Configuring as keyboard
[ 10382.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10382.829] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10382.829] (**) Option "xkb_rules" "evdev"
[ 10382.829] (**) Option "xkb_model" "evdev"
[ 10382.829] (**) Option "xkb_layout" "us"
[ 10382.864] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 10382.864] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10382.864] (II) Using input driver 'evdev' for 'Video Bus'
[ 10382.864] (**) Video Bus: always reports core events
[ 10382.864] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 10382.864] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10382.864] (--) evdev: Video Bus: Found keys
[ 10382.864] (II) evdev: Video Bus: Configuring as keyboard
[ 10382.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input6/event6"
[ 10382.864] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10382.864] (**) Option "xkb_rules" "evdev"
[ 10382.864] (**) Option "xkb_model" "evdev"
[ 10382.864] (**) Option "xkb_layout" "us"
[ 10382.865] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 10382.865] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10382.865] (II) Using input driver 'evdev' for 'Video Bus'
[ 10382.865] (**) Video Bus: always reports core events
[ 10382.865] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 10382.865] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10382.865] (--) evdev: Video Bus: Found keys
[ 10382.865] (II) evdev: Video Bus: Configuring as keyboard
[ 10382.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:01/input/input7/event7"
[ 10382.865] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 10382.865] (**) Option "xkb_rules" "evdev"
[ 10382.865] (**) Option "xkb_model" "evdev"
[ 10382.865] (**) Option "xkb_layout" "us"
[ 10382.866] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10382.866] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10382.866] (II) Using input driver 'evdev' for 'Power Button'
[ 10382.866] (**) Power Button: always reports core events
[ 10382.866] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10382.866] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10382.866] (--) evdev: Power Button: Found keys
[ 10382.866] (II) evdev: Power Button: Configuring as keyboard
[ 10382.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 10382.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 10382.866] (**) Option "xkb_rules" "evdev"
[ 10382.866] (**) Option "xkb_model" "evdev"
[ 10382.866] (**) Option "xkb_layout" "us"
[ 10382.866] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 10382.866] (II) No input driver specified, ignoring this device.
[ 10382.866] (II) This device may have been added with another device file.
[ 10382.866] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 10382.866] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 10382.866] (II) Using input driver 'evdev' for 'Sleep Button'
[ 10382.866] (**) Sleep Button: always reports core events
[ 10382.866] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 10382.867] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 10382.867] (--) evdev: Sleep Button: Found keys
[ 10382.867] (II) evdev: Sleep Button: Configuring as keyboard
[ 10382.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 10382.867] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 10382.867] (**) Option "xkb_rules" "evdev"
[ 10382.867] (**) Option "xkb_model" "evdev"
[ 10382.867] (**) Option "xkb_layout" "us"
[ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10382.867] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[ 10382.867] (II) No input driver specified, ignoring this device.
[ 10382.867] (II) This device may have been added with another device file.
[ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10382.868] (II) config/udev: Adding input device Chicony CNFA078 (/dev/input/event9)
[ 10382.868] (**) Chicony CNFA078: Applying InputClass "evdev keyboard catchall"
[ 10382.868] (II) Using input driver 'evdev' for 'Chicony CNFA078'
[ 10382.868] (**) Chicony CNFA078: always reports core events
[ 10382.868] (**) evdev: Chicony CNFA078: Device: "/dev/input/event9"
[ 10382.868] (--) evdev: Chicony CNFA078: Vendor 0x4f2 Product 0xb23b
[ 10382.868] (--) evdev: Chicony CNFA078: Found keys
[ 10382.868] (II) evdev: Chicony CNFA078: Configuring as keyboard
[ 10382.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9/event9"
[ 10382.868] (II) XINPUT: Adding extended input device "Chicony CNFA078" (type: KEYBOARD, id 11)
[ 10382.868] (**) Option "xkb_rules" "evdev"
[ 10382.868] (**) Option "xkb_model" "evdev"
[ 10382.868] (**) Option "xkb_layout" "us"
[ 10382.868] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event12)
[ 10382.868] (II) No input driver specified, ignoring this device.
[ 10382.868] (II) This device may have been added with another device file.
[ 10382.869] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
[ 10382.869] (II) No input driver specified, ignoring this device.
[ 10382.869] (II) This device may have been added with another device file.
[ 10382.869] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 10382.869] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10382.869] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 10382.869] (**) Asus WMI hotkeys: always reports core events
[ 10382.869] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 10382.869] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 10382.869] (--) evdev: Asus WMI hotkeys: Found keys
[ 10382.869] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 10382.869] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
[ 10382.869] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 10382.869] (**) Option "xkb_rules" "evdev"
[ 10382.869] (**) Option "xkb_model" "evdev"
[ 10382.869] (**) Option "xkb_layout" "us"
[ 10382.869] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10382.869] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10382.869] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10382.870] (**) AT Translated Set 2 keyboard: always reports core events
[ 10382.870] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10382.870] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10382.870] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10382.870] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 10382.870] (**) Option "xkb_rules" "evdev"
[ 10382.870] (**) Option "xkb_model" "evdev"
[ 10382.870] (**) Option "xkb_layout" "us"
[ 10382.870] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 10382.870] (II) LoadModule: "synaptics"
[ 10382.870] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10382.870] (II) Module synaptics: vendor="X.Org Foundation"
[ 10382.870] compiled for 1.13.0, module version = 1.6.2
[ 10382.870] Module class: X.Org XInput Driver
[ 10382.870] ABI class: X.Org XInput driver, version 18.0
[ 10382.870] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 10382.870] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 10382.871] (**) Option "Device" "/dev/input/event10"
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 10382.894] (**) Option "TapButton1" "1"
[ 10382.894] (**) Option "TapButton2" "2"
[ 10382.894] (**) Option "TapButton3" "3"
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 10382.894] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 10382.904] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 10382.904] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.075
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 10382.904] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 10382.904] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 10382.904] (II) No input driver specified, ignoring this device.
[ 10382.904] (II) This device may have been added with another device file.
[ 10382.904] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 10382.904] (II) No input driver specified, ignoring this device.
[ 10382.904] (II) This device may have been added with another device file.
[ 10383.047] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10383.047] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10383.047] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10383.591] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10383.592] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10383.592] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10397.163] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10397.163] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10397.163] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10397.460] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10397.460] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10397.460] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10565.020] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10565.020] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10565.020] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10567.301] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10567.301] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10567.301] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10624.571] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10624.571] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10624.571] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10656.759] (II) UnloadModule: "synaptics"
[ 10656.759] (II) evdev: AT Translated Set 2 keyboard: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Asus WMI hotkeys: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Chicony CNFA078: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Sleep Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Power Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Video Bus: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Video Bus: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Power Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.779] Server terminated successfully (0). Closing log file.
Last edited by dotfloat (2012-11-06 22:21:05)Nope. Minecraft seems to run fine, albeit quite slowly:
https://dl.dropbox.com/u/7122698/bbs_ar … pyface.png
Cinnamon screenshot: https://dl.dropbox.com/u/7122698/bbs_ar … adface.png
The rendering errors at the bottom border of the "Cinnamon Settings" window and the white boxes between the chromium tabs. These are more or less permanent, they stay there until the window is destroyed, and reappear quickly after the window is first rendered. The white noise looking things on the chromium window stay there until the window repaints itself. Moving the chromium window causes the white noise to start flickering.
The screen froze when I opened a nautilus window and tried to resize it. Xorg.0.log doesn't mention any errors.
This doesn't happen in Cinnamon 2D, so I assume it has something to do with the OpenGL implementation.
Forcing 7600M by adding
BusID "PCI:1:0:0"
to
/etc/X11/xorg.conf.d/20-radeon.cfg
causes Xorg to not even start.
I'm thinking that I've managed to improperly configure the drivers, although I don't see how.
Screenshot from aur/doomsday running doom shareware: https://dl.dropbox.com/u/7122698/bbs_ar … s_good.png
The .wad (data file containing all the game's assets) isn't corrupted. The engine itself might be, as the sprites are always corrupted in the same way. Note the barrel on the right side that has parts of a lower resolution version of itself (mipmapping) and blue armour, the light thingy in the middle that contains a lower resolution of itself and a shotgun ammo, and the pillar in the other room that is just not nice to look at. Moving away or towards the sprite (which effectively changes the mipmap level rendered) might make the sprite look as it is supposed to be. -
When I look at itunes, sometimes the items have a graphical glitch. Sort of doubling themselves, and just straight out looking wrong. When I take a screenshot, the screenshot has no glitches, but the actual screen does. Heres a picture I took of the screen with my iphone.
I'm not sure if theres anything else I should include, so I'll include this.
Itunes Version 12.1.0.50
MacBook Pro (Retina, 15-inch, Late 2013)
OS X Yosemite Version 10.10.2
Processor 2.6 GHz Intel Core i7
Graphics: Intel Iris Pro and NVIDIA GeForce GT 750MSee.
-
Nokia N8 CPU Problem? Bug? Glitch? Please read!!
Hi there, I just discovered a... problem? or a bug? a glitch? whatever. I discovered a problem on my Nokia N8 about it's CPU speed.. I accidentally saw on the application X-plore that my N8's CPU is set to just only 192 MHz! I was schocked when I saw that since the CPU of Nokia N8 is said to be at 680 MHz. I rebooted my N8 to refresh it. After I rebooted my N8, I did not run any app and started X-plore right away and check it again. To my surprise, it's still set at 192 MHz. So I posted about this thing on a forum and asked if it's the same as their N8's. So someone replied and said his N8 was also set at that speed. So I started to worry.
Other Nokia N8 users please also check yours. All you have to do is install X-plore, just find it over Google.
Attachments:
Scr000022.jpg 40 KBshakivrizvi wrote:
Battery definitely comes first. But it doesn't mean it has to be 2 days standby time when processor speed is not enough to process mail or starting cam. Think how superior Nokia will be if battery life is a bit below this with a better processor speed.
If you asks to anroid lover or iphone lover what will come first in their are processor speed & phone material quality, where Nokia both falls behind. Though all other options are still great than iphone or anroids.
hmmmm.
My Sister had the HTC Desire when it can out. And though she loved the phone, she couldn't stand the fact that when she went out with it, not only did she have to think about where she could charge it, but also had to carry a micro USB cable to work just for that purpose too.
She's since upgraded to the Galaxy S, and though the phone is much snappier and brighter, her main wow factor was............." at least I don't have to carry the USB lead anymore!!"
So in my estimation, I can live my so called "mediocre" Symbian^3 N8 speed phone, than the worlds fastest dual, triple or quad core phone which will no doubt have only half the life anyway.
Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
N8-00 Tesco UK 059C951, Lumia 920
Maybe you are looking for
-
Como generar una factura de clientes con lotes
Como Generar Una factura de Clientes con lotes, es Decir buscas? Busca otros Una Lista de Materiales Con Todos SUS Hijos, Tener pecado Una generada Orden de venta. Mi codigo es el siguiente, en solitario ingreso CUANDO Que El artículo De Una Lista de
-
Saving Gallery and iWeb from MobileMe before June 30
How do I save my iWeb and Gallery from Mobile Me before June 30 ???
-
HP Pavilion dv7 Note Windows 7 Home edition
-
Just a quick question. Am currently using Photoshop 7, and don't recall if it's possible to change the color of the healing brush outline. When I use the healing brush, the outline of the brush size is a light blue color. I'd be able to see it muc
-
How to receive a gif file using a custom ABAP FM
Hi Experts, Here is my requirement. I have to provide an interface which should receive a GIF file. I have created a FM but what data type should I define in the import parameter or the table parameter to receive the GIF