Processor Name disappears during Confirmation Approval
Hi All,
We are facing an issue with the Confirmation Approval process. When the confirmation is being created, in the Approval tab, we are able to see the approvers picked up as per the logic written. The approvers are getting determined correctly.
Once the confirmation is created, the processor name (or the approver name) disappears.
The work item does not have any agents assigned to it.
This was working in the development system, but in quality we seem to face this problem.
Pls let me know if anyone has faced this issue/ or if there is any sap note to fix this.
Thanks in advance for your help!
MS
Hi Masa,
I got "no authorization" at the very last step - "attribute". I am applying for it now. Will update when I get it. Thanks!!
--- update ---
I worked around the authorization.
After clicking on "attribute" following your instruction, I see a pop up window where the radio button "General forwarding allowed" is checked; classification = "not classified". Two checkboxes for lock are not checked.
Is it the correct setting?
Edited by: Jay Yang on Mar 3, 2011 3:49 PM
Similar Messages
-
Hi, can you advise me, which SSD i can instal to my iMac
Thanks.
Model Name: iMac
Model Identifier: iMac12,2
Processor Name: Intel Core i5
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GBHi HarmitClaire,
Welcome to the Apple Support Communities!
I understand that your MacBook Air is not charging as expected. In this situation there are troubleshooting steps that I would recommend. Please use the attached article as a resource for steps to help you resolve this situation.
Mac notebooks: All about batteries - Apple Support
My battery is not charging
Confirm the correct wattage AC adapter for the computer. A power adapter rated for a lower wattage than is required for the system may not reliably charge the computer. For assistance identifying the proper adapter, review Intel Based Mac notebooks: Identifying the right power adapter and power cord--US. Additional adapter troubleshooting is available in Troubleshooting MagSafe adapters. If issues persist please reset the SMC.
Best regards,
Joe -
My MacBook Air is not charging...any help?
Model Name: MacBook Air
Model Identifier: MacBookAir4,2
Processor Name: Intel Core i5
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MBA41.0077.B11
Model Name: MacBook Air
Model Name: MacBook Air
Model Identifi
Total Number of Cores: 2
L2
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM VerHi HarmitClaire,
Welcome to the Apple Support Communities!
I understand that your MacBook Air is not charging as expected. In this situation there are troubleshooting steps that I would recommend. Please use the attached article as a resource for steps to help you resolve this situation.
Mac notebooks: All about batteries - Apple Support
My battery is not charging
Confirm the correct wattage AC adapter for the computer. A power adapter rated for a lower wattage than is required for the system may not reliably charge the computer. For assistance identifying the proper adapter, review Intel Based Mac notebooks: Identifying the right power adapter and power cord--US. Additional adapter troubleshooting is available in Troubleshooting MagSafe adapters. If issues persist please reset the SMC.
Best regards,
Joe -
When I switched to LV 8.6 (it's also in 8.6.1) I started getting a file name collision warning when building an installer that included the Report Generation toolkit. The executable works, but I don't like to leave warnings uninvestigated. I don't understand 1) why it's happening now and 2) what it's recommending for the fix. Here's part of the actual warning it gives.
LabVIEW prevented a file name collision during the
build. Duplicate file names cannot be copied to the same destination. You can
rename files as part of the build process to avoid name conflicts.
The following files were moved to a unique
location:
C:\Program Files\National Instruments\LabVIEW
8.6\vi.lib\Utility\NIReport.llb\Append Control Image to Report.vi
C:\Program
Files\National Instruments\LabVIEW 8.6\vi.lib\Utility\NIReport.llb\HTML\Append
Control Image to Report.vi
C:\Program Files\National Instruments\LabVIEW
8.6\vi.lib\Utility\NIReport.llb\Append File to Report.vi
C:\Program
Files\National Instruments\LabVIEW 8.6\vi.lib\Utility\NIReport.llb\HTML\Append
File to Report.vi
C:\Program Files\National Instruments\LabVIEW
8.6\vi.lib\Utility\NIReport.llb\Append Horizontal Line to Report.vi...........Hi GS,
The architecture of the Report Generation Toolkit was changed in LabVIEW 8.6 to utilize LabVIEW Classes. As such, there are some warnings during an EXE build because the class VIs have identical names. Classes were not used in the toolkit in LabVIEW 8.5 and previous...that's why you didn't see any warnings during the build until now.
Your EXE should still function properly, and you shouldn't have to change anything about your build. The purpose of the warnings is to let you know that the duplicate-named VIs needed to be handled differently during the build.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:
iMac Model Identifier:
iMac7,1 Processor Name:
Intel Core 2 Duo Processor Speed:
2 GHz Number Of Processors:
1 TotalOpen Console in Utilities & see if there are any clues or repeating messages when this happens.
-
Creative cloud installer just disappears during install
I had creative cloud and on last update most of the applications are gone along with the desktop icon.
I have tried to install creative cloud again - but it just stops halfway and disappears during install.
I've tried safe mode install
Ive renamed OOBE folders in both librarys
I've tried the adobe application manager and that crashes on install
I've tried the Adobe clean up tool
Nothing is working to get creative cloud to reinstall on the computer - I've lost about 4 applications in creative cloud
Working on a Mac - Yosemite OSHi! The cleaner failed - simply could not detect any creative cloud products. ( It did find a previous CS6 installation, long since uninstalled, actually).
Didn't get a chance to try ROOT, as an Adobe tech (Loveneesh) remoted in and did some 'known fixes'... basically he cleaned up the failed CC desktop installation ( deleted a couple of folders) - and then gave "wide open" permissions to a couple of sets of library folders ( One for machine, and one for user). I believe they were
/library/application support/
/library/application support/Adobe/
/users/[username]/library/application support/
/users/[username]/library/application support/Adobe/
Still couldn't install CC desktop, (failed twice!) BUT that at least allowed the installation of "Adobe App Manager" - which was subsequently UPGRADED to CC Desktop. Something of a clever workaround, if you ask me!
And now its all working OK again.
I'm a bit bothered by the somewhat cavalier ""Everybody" permissions applied to library folders, but as I understand this is the quick fix when nobody quite knows what the heck is going on with permissions... (I suppose ROOT access gives much the same effect for installations) -
No GR on Confirmation Approval in Extended Classic Scenario
Hi all gurus out there,
We are trying to implement confirmation approval workflow in our SRM system. Our SRM version is SRM 3.0 or EBP 4.0 and we are operating in extended classic scenario.
We implement the approval workflow WS10400002 (1-step approval) and WS10400010 (no approval). WS10400002 is used in situation when an administrator does the confirmation and will go to the requestor for approval. Here, when the requestor approves the confirmation, the status is updated correctly to 'Approved' but no goods receipt is triggered by the system. We looked at the workflow and found that there is no task/activity to do the post goods receipt in the backend system.
Can someone please confirm whether these are the correct workflows that I should be using and that it is not a bug? I just want to make sure it is not as a result of a standard limitation before going back to SAP.
Cheers!
Siow FongHi Guys,
I checked with SAP on this and found out that the standard codes would have created the goods receipt. This creation is no longer coded in the workflow itself (like the old workflow used to be). The reason why it was not working for us was a piece of code being added that prevented the creation of the goods receipt.
Regards
Siow Fong -
To get supplier name based on latest approved date
hi
in PO SUPER USER -Purchase Order Summary ,when we enter the item number in Item,rev field a new form Purchase Order Lines opens
in this form there are many lines of PO numbers ,suppliers(vendors),approved date ,can we get the supplier name for which the approved date is most recent
kindly guide
thanking in advancehi
in my system i can see the latest approved date wise but i have to add an inline query on the most recent vendor based on approved date to an already existing query
meaning just the first row data(most recent supplier) should be captured in the query
when i do the following query , i am taking an eg of the item_no 1020101001
select msib.segment1,max(pha.approved_date) from
po_headers_all pha,
po_lines_all pla,
po_vendors pv,
mtl_system_items_b msib
where
pha.po_header_id = pla.po_header_id
and pla.item_id = msib.inventory_item_id
and pv.vendor_id=pha.vendor_id
and msib.segment1='1020101001'
--and pha.approved_date=max(pha.approved_date)
group by
--item_id.
msib.segment1
this is the output i get
segment1 MAX(PHA.APPROVED_DATE)
1020101001 1/9/2011 3:16:48 PMwhen i do the following query
select msib.segment1,max(pha.approved_date) ,pv.vendor_name from
po_headers_all pha,
po_lines_all pla,
po_vendors pv,
mtl_system_items_b msib
where
pha.po_header_id = pla.po_header_id
and pla.item_id = msib.inventory_item_id
and pv.vendor_id=pha.vendor_id
and msib.segment1='1020101001'
--and pha.approved_date=max(pha.approved_date)
group by
--item_id.
msib.segment1
,pv.vendor_name
segment1 MAX(PHA.APPROVED_DATE) VENDOR_NAME
1020101001 7/21/2008 9:09:20 AM TRIZAC ABU DHABI
1020101001 1/9/2011 3:16:48 PM SAUDI CEMENT COMPANY
1020101001 2/14/2010 4:03:46 PM UNION CEMENT NORCEM CO.
1020101001 5/19/2010 3:08:32 PM AS CIMENTO SANAYI VE TICARET A.S.i require the most recent vendor_name for a particular item ( i require the output as below)
segment1 MAX(PHA.APPROVED_DATE) VENDOR_NAME
1020101001 1/9/2011 3:16:48 PM SAUDI CEMENT COMPANY
kindly guide me
thanking in advance -
Automatic change of Work Center during Confirmation.
Happy New Year to all!
Just want to ask if anyone of you encountered the scenario during confirmation in which the backflushed work center was changed. The user claims that they did not do any changes during confirmation nor did they change manually the order itself. The confirmation happened last December and they only noticed it this month when they were checking the reports.
I did not configure their system so that they can change the Work Center during confirmation. By default, the work center is grayed out during confirmation.
Hope to hear from some of you soon!
Thanks and regards,
jLmendoza
Edited by: John Luis Mendoza on Jan 4, 2011 3:15 AMDear
If your production order operations are re-scheuled and dispatched after Capacity Avalaiblity check in cm21/cm22/cm31 etc , then during the dispatch of operation , you have option to change Work Cnetre , time , date based on the selection option in Startgy profile (CM31/CM21-Enter the WORK CENTRE /Order ) and check wether work centre is changed.
One more option may be in Order Change in CO02-Operation Overview -Operation -Work centre -Here user may change the Work Centre .
If you have Order Change management active then you can trace the same .
Refer : Production order change history
Otherwise , there is not such confirguration in SPRO where work centre can be changed automatrically during confirmaiton because it will grade out based on the ste of confirmaiton default screen in OP00.
Hope it clarifies
Regards
JH -
Exchange rate type for version - error message GP541 during confirmation
Hi FICO Experts,
I bumped into a problem during confirmation in CO15. (I would like to get the SFG by mvt 101 and consume the raw material by 261).
The error messase I get is:
Maintain the exchange rate type for version 000 in 2009
Message no. GP541
Diagnosis
You want to use plan version 000 with controlling area 1000 in fiscal year 2009.
You have not specified an exchange rate type for this plan version for fiscal year 2009. Since the update of all currencies in 2009 is active in the control indicators of the controlling area, currency conversions are possible and sometimes also needed.
It is therefore necessary to specify an exchange rate type for plan version 000 in year 2009.
System Response
The system will not accept your entry.
Procedure
1. Please maintain plan version 000 first using the function 'Change Plan Version', or
2. correct your typing error.
I'd like to ask you to please help to resolve this issue.
Thanks,
Csabago to Maintain Version at SPRO-Controlling-General Controlling-Organization->Maintan Version and do what ever it says. Provide Exchange rate type P or M would resolve your issue
-
Error During Confirmation Reversal of production Order
Dear experts
In production client during confirmation reversal for ,we are getting below error message
Enter only true account assignment.
Regards
sandeep PatilHi Sandeep,
If it's just a warning, press the enter key and it should post.
or then you will have to debug the reversal process to locate from where the error message gets triggered..
Regards,
R.Brahmankar -
HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)
What calendar were you syning to? Outlook? Google? Something else? The directions on how to resync vary a bit.
-
HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calender disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)
HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calendar disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)
The Apple techs are looking. But they can't find it. Nor can they find a back up on my laptop, Evidently when I backed up my Iphone to computer the calendar wasn't syncing. Since I only use the calander on my phone - I never noticed.
The Apple store rep that sold me the I-Phone 5 on Monday, was transferring my contacts and calendar thru I-Cloud (I never used I-Cloud before that moment - and always had it turned off). He successfully transferred the contacts - which are still on my phone), but the Calendar weirdly split into 6 calendars (2 of which were linked to my G-Mail which only had a few entries) (4 were linked to my MSN / Hotmail email and contained all the major events/data). I never created calendars that were separate or liked them to 2 different emails. I just typed entries into the I-Phone calendar. However, the calendar did exist on the new I-Phone for 24 hours. Something happened during transfer. When the Apple Genius Bar tech was attempting to back up my Calendar & merge the 6 calendars, everything disappeared in his hand while he was looking at it.
I am hoping that some really good data recovery expert exists that can restore the calendar that was in both I-Phones yesterday. It is completely devastating if I can't recover it.
Any help, or referrals, is great appreciated!!!!
Thanks! -
I have a MackBook A1181 that I bought off Ebay :/ it came with pirate discs and no info....I need to upgrade my Safari so Outlook will work and would like to
get some kind of word/writing tool on it... the info is:
Model Name: MacBook
Model Identifier: MacBook1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB11.0061.B03
SMC Version: 1.4f12
Serial Number: 4H631CVDU9B
Sudden Motion Sensor:
State: Enabled
Can anybody help?!First correct the pirate disc issue. Buy OS X 10.6 Snow Leopard from Apple for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Snow Leopard is the latest version your macbook 1,1 will run. Oitlook is part of the Microsoft Office suite, if you want outlook you'll need to also purchase Office. If you can get by with Apple's mail program there are free alternatives to Office like Libre Office or Open Office. -
iOS 7 ugrade failed " Error:Device disappeared during timed transition". Phone will not now turn on or sync with itunes, any ideas please?
if a Mac OSX Computer is in near - try iBackup Viewer.
This is free of charge and can read your backup.
and thats the main difference. Those tools are reading the saved Data in the backup
but itunes attempts to restore the data from the backup on your iphone. if there are any corrupted data in the backup - the backup restore goes wrong. this can happen during security software or wrong corrupt data already stored on the iphone.
if itunes messed up to restore from backup try this one :
- restore your iphone to factory settings using HT1808 or reset all settings and content direct from iphone
- rename your iPhone (e.g. iPhone Test)
- setup your iPhone as new device -> attempt to make a new backup - if successful -
- click in itunes on restore from backup... and choose your desired backup
or go to:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(Username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista - Windows 7: \Users\(Username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Pull your complete BackupFolder and try a different PC - copy the BackupFolder on this different PC in the same Path above - start iTunes and see if your Backup is there - attempt to restore from Backup again
Maybe you are looking for
-
How can I display the first and last name using a paramater as employee ID?
Hi SAP, I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula
-
Why does a black warning triangle appear where my photos should be?
trying to move photos into files to place on a zip drive. All "events" have moved successfully except for 2 events that will not allow me to move them into a file. When I click on the event in iPhoto gallery, the photos appear at the bottom of my s
-
Custom sapscript to PDF and email
Hi all, I have a requirement to create a new sapscript that can be converted to PDF and emailed. I have done this for regular reports but have no idea about doing it for sapscript. Does anybody know how I can do this? I've search the forums here but
-
Hello, I use Premiere Pro CC 2014 on my Mac Computer. I am unable to change the settings in the preference of Premiere Pro. When I change a setting and click "OK" Premiere doesn't respond. I can click cancel and the window closes, but when I click ok
-
Hi, i want to write a function or a pipelined function which will process data from a given table. the structure of the table is as below : clasec_menu_m MENU_LEVEL IS_MENU_A_LEAF MENU_ID MENU_NAME MENU_TITLE MENU_DESCRIPTION MENU_PARENT_ID MENU_SCRE