Processor performance for AU

Hi ,
i need to know the system requirements to work with Au correctly , i need to know if the memory of the processeur is important 2mo , 4 mo , 6 mo ?
( I need a processeur 3 ghz because i use VSL instruments ... i have 4 go DDR mémory , 5oo Go hard drive 7200/min )
I have another question about VSL instruments ... Au doesn't reconize it with midi sequencer ... is that normal ? Cubase can reconize it why ?
Au reconize all yhe midi instruments of my computer expept VSL . Do i have to catch them in the directory manualy ?
Thanks

Glad to hear you found the resolution and thanks for sharing.
Niki Han
TechNet Community Support

Similar Messages

Infamous WHINE & lack of Processor Performance settings?

I have owned all of the Al books from the 1ghz 17" to the 1.67 17". I noticed the whine first on the 15" 1.25 AlBook 2 yrs ago. During that time we were able to throttle the Processor settings ourselves via the Energy Saver setting in System Preferences. As of the release of the 1.67 AlBooks that option is no longer available. When the Processor Setting was set to Automatic, the AlBooks ALAWYS had the WHINE & HISS from under the keyboard in the same spot the MacBook Pro's demonstrate today.
I called Apple Tech support this afternoon and spoke to a tier 2 "guy". I asked about Speedstep / Processor throttling and that option being taken away from us - his reply was that the new processors control that now and are able to go from reduced settings to highest in a fraction of a second never noticed by the user. WRONG ANSWER. What he's telling me is the Processor is ALWAYS set to AUTOMATIC and we can't do anything about that. While his answer may be true, these units have the same whine & hiss as the previous AlBooks when set to Automatic. THIS IS A PROBLEM.
I do want that option BACK on my portable!!! It was nice knowing that if I was only wanting to watch a DVD on battery power that I could ensure low power consumption by going to the Energy Saver and setting the processor performance to "Reduced" or to always have it set to Highest if so desired. I have never been able to set the processor performance to Automatic and NOT hear the whine & hiss.
I have the 2.0ghz MacBook Pro w/ 2g RAM. I do not hear the whine whie the unit is plugged in - but on batter power it's very very loud. I could be wrong, but past experiences have proven that the automatic setting which WE ALL HAVE BY DEFAULT on our MacBook Pro's will produce this unwanted noise. This is an amazing laptop. But I am feeling a bit gimped having those settings taken away.
PJ
MacBook Pro & Dual 2.7 G5 Mac OS X (10.4.5)

Since when does people saying something is so make it so? I'm curious; exactly how many people does it take to repeat some random statement before it automatically becomes fact?
And no, what I said was not meant as a flame. I just wanted to explain why it is hard to take the post seriously. Apparently you took what I said in the opposite way I'd intended. That being said, I did not mean it that way, so sorry for any offense.
Of course a support forum is going to be filled with posts about problems. What would you say is more likely to compel you to make a thread in a support forum, a problem (of any sort), or no real reason at all, just for kicks? Granted , when a product first comes out, there will be a few "I love my MBP!" type threads, but those go away after awhile. The complaints remain, because, let's face it, life is full of problems, and computers have more than their share as a whole.
The reason it's important that this is your first post is that is isn't very hard to imagine people registering to stir up controversy, goof around, or incite even more inflammatory responses (read: troll), when ANY new product is released. My post wasn't accusing you of any of this, merely trying to explain (beforehand) some responses you may get later on.
My only advice is that if you are unsatisfied with your machine, exchange it for a new one. If a noisy screen/processor/speaker is enough to make you reconsider your purchase entirely, then perhaps it would be wiser to wait until this particular issue has been ironed out on Apple's end (certainly not a terrible idea).
I do understand where you are coming from with the processor settings, by the way, and I do miss those settings at times, mostly because I'm a control freak. However, I am assuming that the MBP uses Intel's speed-step technology, and I don't know of a way to manipulate that, so it looks like that little feature is gone. It very well could be at the root of the noise issues, but at this point, that is only speculation.
MBP Mac OS X (10.4.5) 2GHz, 2GB RAM, 256MB ATi, 100GB/7200rpm HDD

No Automatic Processor Performance Setting

I am the new owner of a refurbished 17" Powerbook G4, 1.67GHZ, Dual Layer Superdrive. On my previous Powerbooks, in the energy saver control panel there always was the option for Automatic Processor Performance Setting, where one could set the processor to reduced, automatic or highest. On this new machine, there is no Automatic Processor Performance Setting! Any explanation?
Powerbook G4 17" 1.67GHZ Mac OS X (10.4.8) 2GB RAM, 160GB 128MB VRAM DL SuperDrive

Thanks again, I found the answer in the Developer notes here: http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G4/17inchPowerBookG4/1Overview/chapter_2_section_6.html#//a ppleref/doc/uid/TP40003166-CH205-TPXREF115.
Powerbook G4 17" 1.67GHZ Mac OS X (10.4.8) 2GB RAM, 160GB 128MB VRAM

How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
ranki

Hi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com

Can anyone suggest how to fix batch processor performance?

The DBA's examined the OPA batch process while it was running. Oracle was sitting idle most the time waiting on the batch processor (according to the DBA staff.) Locks were not an issue and the DB was not under any load.
The performance is absolutely dismal and we are going to open an OPA support ticket, but would like a quick answer if anyone on this forum has a quick answer.
(Also, if you try to kill the batch job with <ctrl-c> because it is taking too long, then it leaves the sessions and cursors open. Is there a way to gracefully shut down the batch processor?)
We have a single simple table where the first 5 columns are conditions and the last column is a conclusion.
I filled the table with 1,000,000 rows of conditional data. I ran with a configuration like below:
<configuration>
<options>
<rulebase>../output/MyRules.zip</rulebase>
<database>
<url>jdbc:oracle:thin:myusername/mypassword@mydatabase:1521:mySID</url>
<driver>oracle.jdbc.OracleDriver</driver>
<driversrc>\myjdbcdriverpath\ojdbc6.jar</driversrc>
</database>
<output type="db" />
<mappings>
<boolean-format true-value="TRUE" false-value="FALSE" />
<mapping entity="global" table="SSPNA_IN" primary-key="ID">
<attribute name="bHasNoCountableIncome" field="BHASNOCOUNTABLEINCOME" />
<attribute name="bIsResidentOfNY" field="BISRESIDENTOFNY" />
<attribute name="cSSIBenefitAmt" field="CSSIBENEFITAMT" />
<attribute name="tFedLivingArrangementCD" field="TFEDLIVINGARRANGEMENTCD" />
<attribute name="tManualHMOInd" field="TMANUALHMOIND" />
<attribute name="tPaymentStatusCD" field="TPAYMENTSTATUSCD" />
<attribute name="tPrincipleProviderCD" field="TPRINCIPLEPROVIDERCD" />
<attribute name="cSSPNAPayment" field="CSSPNAPAYMENT" output="true" />
</mapping>
</mappings>
</options>
</configuration>

This is definitely not something we've seen in the testing environment.
Can you please raise a SR via Oracle Support and provide the following information?
1. Product version. Version 10.4.1 added multi-processor support for Java database connection in case you were using 10.4.0
2. Oracle database version
3. Is the database installed on a physical server or a VM? What's the machine specification, i.e. CPU and memory size?
4. Is the SSPNA_IN table indexed?
5. What is the logging level? Does it help if you change the logging level to ERROR?
6. Please provide the rulebase project and DDL/DML to create tables and insert sample data.

Processor Performance??

I read a discussion on mac gaming (http://discussions.info.apple.com/webx?128@@.68adc78a) It says that for certain games, an idea is to change something called processor performance. I am currently on my dads G4 Power mac as my imac has not arrived yet but in system preferences i cannot find anything about the processor (i even did the search using spotlight in system pref.) is this something that is only accessable on the G5 imac or do i find it somewhere else?
Thanks in advance
Adi

This option was added to the operating system for laptops. Setting the performace to lowest results in increased battery life and less heat. It only shows up for G5s and it's usually only changed once on a desktop system.
I'm waiting for "ultra-fastest" and "frackin-fastest" to be added to the drop down menu in 10.5

[help] can't find "processor performance" option in the energy saver

hello....i've just bought my new macbook white 2.0 Ghz. the Mac OS version is 10.5.6
*i can't find any option to change my processor performance* on the "energy saver preferences"....here is the screenshot
it's odd when compared to the screenshot from apple support page
http://km.support.apple.com/library/APPLE/APPLECAREALLGEOS/HT3092/HT30923b.jpg
please help me on this, i can't perform image editing well when the battery get low....thanks a lot

On PowerPC machines, there is an option specifically for Processor Performance, while on Intel machines, the only option is for the entire computer - Better Energy Savings, Normal, Better Performance, or Custom. These can be selected for both on power adapter and battery and affect not only the processor, but also the display, sleep, and hard drive.
On 10.5.6, part of the update removed the option to change power settings from the menu bar drop-down menu - perhaps that is what you are looking at.

Does the AMD A8-6410 meet the processors specifications for Premiere Elements?

I Am looking at this machine, will it work with elements?
Lenovo G50 – 80E3016AUS is a value for money laptop with an AMD quad-core processor inside. The processor type is A8-6410, clocked at 2.0 GHz and supports AMD Turbo Core technology up to 2.4 GHz. The processor has 2 MB of L2 cache and integrated AMD Radeon R5 graphics card. Like other G50 models, it has a 15.6-inch widescreen with 16:9 aspect ratio and 1366 x 768 pixels resolution. It’s very impressive that this affordable laptop is equipped with 8 GB SDRAM. That gives you great multitasking performance. A 500 GB HDD is included inside.

Thanks Sandeep,
I looked at the specs but am not technical enough to know if the A8 processor meets the specs.
2GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCH
Thanks for checking and letting me know.
Craig Crismon
479 957 2861
We Create Memories!
Sent from a mobile office. Please forgive any miss-spellings, Siri is still in beta.

"Processor performance" preference change not taking?

I'm used to keeping my "processor performance" at "reduced" most of the time, unless I'm doing something cpu-intensive like encoding. Lately I've noticed that changing from "reduced" to "highest" (in preferences / energy saver / options) has no affect. (I can tell because my fans don't ramp up as they do when the processor is being taxed.)
Anyone else experience this?

NO, but I can speculate why. The power is more evenly distributed, like the PRAM, NVRAM. It really makes sense spreading the power around like OSx does by default.I think your new method is better for your system over the long hall.'''
Peace,
Ray

Processor Performance with Battery

Hi All,
When using the battery, is your processor speed / performance capped at all?
I was playing with iDVD the other day on battery and when the app was rendering the menus in real-time I noticed a significant stuttering... I havent tried with main power yet, but would of thought my spec machine could handle it...
Any thoughts?

When using the battery, is your processor speed / performance capped at all?
Check in System Preferences -> Energy Saver. Next to "Settings for" choose "Battery" in the drop-down menu. Then click on the Options tab. Towards the bottom there should be a Processor Performance setting, which by default is (at least for other notebooks) set to "Reduced."
Changing that to "Highest" is a good option if you're doing work that requires the best possible processor performance.
And there are other options in the Energy Saver preferences that you might want to take a look at while you're there. Just keep in mind that anything you change in the Battery sections will also affect battery life.
You can also choose some basic Energy Saver settings from a menu when you click on the battery icon in your menubar.
Note that I'm still using a PowerBook and can't check this on a MacBook Pro... yet. (Tomorrow I'll be able to. ;-))

Increase processor priority for Logic 8

I saw an interesting thread on the Final Cut Pro forum - where the users were concerned that rendering did not fully use all of their cores.
This might be of use to heavy Logic users?
http://discussions.apple.com/thread.jspa?threadID=819587&tstart=0
Is your Processor Performance set to "Highest" in your Energy Saver preferences?
To increase the priority of a process in Mac OS X, open the Activity Monitor in the /Applications/Utilities/ folder and get the process's pid. From here, open the Terminal, which is also in the Utilities folder, and enter the following:
sudo renice -20 pid
where pid is the number you found earlier. Press Enter and type in your password; nothing will appear in the window while it is being typed. The process in question will now run as fast as the computer can make it go. The effect of this command ends when the program quits.
-20 refers to the "nice" level of the process. UNIX operating systems have what is called a scheduler, a part of the kernel that decides when tasks run and for how long before CPU time is allocated to another task.
Processes with higher "nice" levels are nicer -- meaning that they get a smaller share of the processor time. Processes with a lower nice value are less "nice". Nice values range from -20 to +19. Basically, it's a hint to the kernel's scheduler that schedules processes to run about how aggressive it should allow a process be in using up processor time. It's conceptually distinct from the concept of "priority" which enters into the process scheduling a little differently.
You can do this automatically by opening the Script Editor in the /Applications/AppleScript/ folder and pasting in the following:
tell application "Final Cut Pro"
run
end tell
set the_lines to paragraphs of (do shell script "ps -U $USER")
set the_app to "Final Cut Pro"
set the_line to ""
repeat with this_line in the_lines
if this_line contains the_app then
set the_line to this_line
end if
end repeat
if the_line is "" then return
set the_pid to word 1 of the_line
do shell script "renice -20 " & the_pid password "yourpass" with administrator privileges
Provide your administrator password in the last line, and save the script as an application in a location easy to access. Open it whenever you want to open Final Cut Pro. More information about the command, including the purpose of the -20, is available in this article.
http://developer.apple.com/documentation/Darwin/Reference/ManPages/man8/renice.8 .html

Here is an application which allows just that:
NICER
http://www.versiontracker.com/dyn/moreinfo/macosx/9473
Nicer 2.1b ©2001 Ryan Stevens
This is a beta (preview) release. Use at your own risk. If you have comments, questions or feature requests drop me a line (see the Contact section).
Know bugs:
1) Application names get clipped at 16 characters. Until I figure out a sensible way to get the full names (without mass amounts of guesswork/workaround code) this will have to do, sorry! If you have a fix you'll let me know, right!?
2) Choosing "Quit [appName]" from the context menu doesn't let you save changes (if any) in the quitting app. (This may change in next release)
3) Choosing "Kill [appName]" or "Quit [appName]" from the context menu doesn't show an alert with the option to cancel. Select one and the app will quit -- unless the process doesn't belong to you, in which case you will have a chance to cancel.
4) Although not exactly a bug, Nicer doesn't gather much meaningful info on the process. I like the simple look so if/when we gather more info it may get put into an Inspector window.
5) [insert quirk/bug/missing feature here.]
Installation:
Drag n Drop install/uninstall. I recommend putting Nicer in /Applications/Utilities/ but it's really up to you.
License:
Nicer is freeware. Bam! Simple as that.

Processor Upgrade for iMac G3

Hello, I didn't see any particular posts specifically pertaining to the slot loading iMac (Graphite)..I hope someone can help me out.
I have a G3 Graphite iMac, upgraded RAM currently running Tiger. I used to use it but wiped it clean, re-installied the OS and created a separate account for my 8y/o son, so essentially there aren't many apps on there. For some reason it's running slower than it should, even with just Safari open. Is there a fix or possibly a processor upgrade for this model (I keep seeing that there isn't, but I want to be sure).
It's either that or constantly hearing my son complain of the lagtime and ask for our laptops instead...

According to Mactracker at one point there was a 700 MHz model available in Graphite & Snow. If you could find a 700 MHz G3 CRT iMac logic board on eBay it might be possible to upgrade the processor speed. You could also install a Matshita SR-8184 or SR-8186 DVD-ROM drive.
There's firmware available for both drives that allow them to be flashed to RPC1 or region free meaning they can play DVDs from any region in the world. Normally the drive is restricted to being able to only play Region 3 DVDs from the US. If you order a Matshita SR-8184CD optical drive from www.welovemacs.com call their 800 number listed on their website & be sure to ask for Jessica or Faith since some of the optical drives they sell don't have RPC1 firmware available for them.

Performance for table BKFP

Hi,
I would like to enquire is there anyway that i can improve the performance for table BKPF from the ABAP code point of view.
Because we have customise one program to generate report for the asset master listing.
one of the select statement are show as below:
      SELECT SINGLE * FROM BKPF WHERE BUKRS = ANEP-BUKRS
                                  AND GJAHR = ANEP-GJAHR
                                  AND AWKEY = AWKEYUS.
I would like to know how it different from the select statemene below:
SELECT SINGLE * FROM BKPF INTO CORRESPONDING FIELDS OF T_BKPF
      WHERE
      BUKRS = ANEP-BUKRS
AND GJAHR = ANEP-GJAHR
AND AWKEY = AWKEY.
Which of the select statements above can enhance report,because currently we have face quite bad issue on this report.
Can i post the ABAP code on this forum.
Hope someone can help me on this. thank you.

Hi,
As much as possible use the primary keys of BKPF which is BUKRS, BELNR and GJAHR. Also, select only the records which are needed so to increase performance. Please look at the code below:
DATA: lv_age_of_rec TYPE p.
FIELD-SYMBOLS: <fs_final> LIKE LINE OF it_final.
LOOP AT it_final ASSIGNING <fs_final>.
get records from BKPF
    SELECT SINGLE bukrs belnr gjahr budat bldat xblnr bktxt FROM bkpf
    INTO (bkpf-bukrs, bkpf-belnr, bkpf-gjahr, <fs_final>-budat,
          <fs_final>-bldat, <fs_final>-xblnr, <fs_final>-bktxt)
    WHERE bukrs = <fs_final>-bukrs
      AND belnr = <fs_final>-belnr
      AND gjahr = <fs_final>-gjahr.
if <fs_final>-shkzg = 'H', multiply dmbtr(amount in local currency)
by negative 1
    IF <fs_final>-shkzg = 'H'.
      <fs_final>-dmbtr = <fs_final>-dmbtr * -1.
    ENDIF.
combine company code(bukrs), accounting document number(belnr),
fiscal year(gjahr) and line item(buzei) to get long text.
    CONCATENATE: <fs_final>-bukrs <fs_final>-belnr
                 <fs_final>-gjahr <fs_final>-buzei
                 INTO it_thead-tdname.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        client                        = sy-mandt
        id                            = '0001'
        language                      = sy-langu
        name                          = it_thead-tdname
        object                        = 'DOC_ITEM'
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
      TABLES
        lines                         = it_lines
     EXCEPTIONS
       id                            = 1
       language                      = 2
       name                          = 3
       not_found                     = 4
       object                        = 5
       reference_check               = 6
       wrong_access_to_archive       = 7
       OTHERS                        = 8.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
if successful, split long text into start and end date
    IF sy-subrc = 0.
      READ TABLE it_lines TRANSPORTING tdline.
      IF sy-subrc = 0.
        SPLIT it_lines-tdline AT '-' INTO
              <fs_final>-s_dat <fs_final>-e_dat.
      ENDIF.
    ENDIF.
get vendor name from LFA1
    SELECT SINGLE name1 FROM lfa1
    INTO <fs_final>-name1
    WHERE lifnr = <fs_final>-lifnr.
    lv_age_of_rec = p_budat - <fs_final>-budat.
condition for age of deposits
    IF lv_age_of_rec <= 30.
      <fs_final>-amount1 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 30 AND lv_age_of_rec <= 60.
      <fs_final>-amount2 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 60 AND lv_age_of_rec <= 90.
      <fs_final>-amount3 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 90 AND lv_age_of_rec <= 120.
      <fs_final>-amount4 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 120 AND lv_age_of_rec <= 180.
      <fs_final>-amount5 = <fs_final>-dmbtr.
    ELSEIF lv_age_of_rec > 180.
      <fs_final>-amount6 = <fs_final>-dmbtr.
    ENDIF.
    CLEAR: bkpf, it_lines-tdline, lv_age_of_rec.
ENDLOOP.
Hope this helps...
P.S. Please award points for useful answers.

HOW TO USE A SINGLE PERFORM FOR VARIOUS TABLES ?

perform test TABLES t_header.
select
       KONH~KNUMH
       konh~datab
       konh~datbi
       konp~kbetr
       konp~konwa
       konp~kpein
       konp~kmein
       KONP~KRECH
       FROM konh INNER JOIN konp
              ON konpknumh = konhknumh
       into table iTABXXX
        "ANY TEMPERARY INTERNAL TABLE.
       for all entries in t_header
       where
             konh~kschl = t_header-kschl
         AND konh~knumh = t_header-knumh.
endform.
how can I use above perform for various internal tables of DIFFERENT LINE TYPES but having the fields KSCHL & KNUMH.

u can use single perform....
just see this example......hope this is what u r expecting....
tables : pa0001.
parameters : p_pernr like pa0001-pernr.
data : itab1 like pa0001 occurs 0 with header line.
data : itab2 like pa0002 occurs 0 with header line.
perform get_data tables itab1 itab2.
if not itab1[] is initial.
loop at itab1.
write :/ itab1-pernr.
endloop.
endif.
if not itab2[] is initial.
loop at itab2.
write :/ itab2-pernr.
endloop.
endif.
*&      Form get_data
      text
     -->P_ITAB1 text
     -->P_ITAB2 text
form get_data tables   itab1 structure pa0001
                        itab2 structure pa0002.
select * from pa0001 into table itab1 where pernr = p_pernr and begda le sy-datum and endda ge sy-datum.
select * from pa0002 into table itab2 where pernr = p_pernr and begda le sy-datum and endda ge sy-datum.
endform.                    " get_data
Regards
vasu

SCSI card for a G5 or processor upgrade for a G4?

Hi all
Actually, this is a question that concerns the G5 and the G4 forum, but I decided to post it here first.
So, I have this old G4/400 PCI with an Adaptec 2930 SCSI card that I use for scanning slides with an Artix 4000t sclide scanner; this works fine, but the G4 is rather slow when it comes to using some features of the scanning software, such as removing scratches.
I've been thinking about buying a SCSI card for my G5 (Dual 1.8) for some time now, but I'm not sure what card I should go for; I'm not even sure if there are still cards for such an "old" device as the slide scanner (about 3 to 4 years old, no Ultrawide or something like that). And then there's the problem of the drivers for the card - how long will they be available, especially now that Apple is switching to Intel...?
The other possibility would be to buy a processor upgrade for the G4. I've seen some at OWC, and they seem to be less expensive than a SCSI card. The drawback of this solution is of course that I'll have to keep the G4 standing on my desk... on the other hand, I do know that the scanner will work perfectly with the G4.
The G5, on the other hand... it will be faster and easier, since I won't have to transfer the files for storage and editing, I could free some space on my desk,... but will it work? The G5 is running 10.4, I'm not sure if my current scanner driver is compatible... and what when 10.5 comes out...?
So I'm looking for a second, third, fourth... opinion:
What would you do? Get a SCSI card for the G5 or a processor upgrade for the G4? What SCSI card would you recommend?
TIA,
Tina

I've done some research on G5 and SCSI and scanners, and obviously, what I remembered was correct... making it work seems at least tricky, and maybe expensive too (if you've got to buy new scanning software and and..).
So I guess that's decided: No SCSI on the G5. Leaves the question, should I buy a processor upgrade card for the G4? Getting some dual G4 on eBay might be an option, but then, that would be another computer in my already crammed office, and I just can't throw the G4 away, it's one of the very first models...
I came by the idea of a processor upgrade because I just played around with an old Mac SE, which has an 68030 accelerator card installed, and this seems to work fine. Anyone has any experience with G3 /G4 upgrades (good or bad)?
Smokerz: Why would you not recommend an upgrade? Any bad experiences?
Tina

Processor performance for AU

Similar Messages

Maybe you are looking for