Processor performance on Automatic - any problems using FCP?

I'm asking this because since upgrading to 10.4.6 from 10.3.9 my G5 power supply has started chirping. I've read that setting processor to Automatic (it's on Highest at the moment) is a possible solution but I wondered whether anyone has had issues with FCP when it's set to Automatic?
Comments appreciated.

Currently the HD1200a is hooked up as a firewire device. It is seeing the device, but the capture window does not open with the video and instead says video preview disabled.
The drive needs to be faster, but I am first trying to figure out why Final Cut isn't even opening it in the capture window.

Similar Messages

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Hi .
Apple no longer supports Safari for Windows if that's what you are asking > Apple apparently kills Windows PC support in Safari 6.0
Microsoft has not written IE for Safari for many years.

Are there any problems using a back cover.

I want to protect the back of my iPad from scratches. Are there any problems using a skin or cover on the back?

Is it ok to cover the back of iPad 2? Won't it affect the cooling system? Coz I don't see any ventilation point and it may be the back metal plate itself which brings out the heat. I purchased a "Targus" back cover from apple store and it fits perfectly and beautifully also very comfortable to handle but I removed it thinking that it might harm., also Apple hasn't introduced any sort of back cover either, only the smart cover for the screen they have, may be coz the back is designed to be open to the air.

I have just installed Digital Editions 4.3 but am having poblems downloading digital books as I get an error message stating 'Error! Check Activation'. I have Windows 7 and didn't have any problems using the previous version of Digital Editions. Can anyon

I have just installed Digital Editions 4.3 but am having poblems downloading digital books as I get an error message stating 'Error! Check Activation'. I have Windows 7 and didn't have any problems using the previous version of Digital Editions. Can anyone advise?

Hi Siobhan ,
Please refer to the following link and see if that helps.
https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
I would also like to know ,does that error message has any specific number ?
Regards
Sukrit Dhingra

Any problems using 6' usb to micro usb cable for programming Apple TV

Tried using configurator to program Apple TV with 6' USB to Micro USB and it would not connect. Will connect with 3' cable. Any info?

Welcome to the Apple Community.
If you are having problems using the 6' cable, it is because there is an issue with the cable rather than it being 6', USB should be fine up to 15'.

Are there any problems using an ipad imported to the UK from korea?

Are there any problems buying an Ipad in South Korea to use in the UK?

Me too - its a possible gift and (like most things) iPhones are cheaper in the states than in Canada.
I'm assuiming these phones are universal. But i'd rather know before buying.
Thanks

Any problem using bseg and bkpf tables

For fico details i using bseg and bkpf tables.
I noted that programming is very difficult because of these tables are cluster table.
plz give me other tables
if i using these tables any problem will come?

>
mysvijai197715 wrote:
> Hi Aniesh,
>
> BSEG and BKPF are cluster tables. It contains transperant tables like BSIS, BSIK etc. For example to take vendor details usr the BSIK.If you use BSEG and BKPF it will take long time search. suppose your concern having lot of data means may be your server will get shutdown. So use only trasnperant tables like BSIS, BSIK etc.
>
>
> Regards
> R.Vijai
Incorrect. BKPF is a transparent table and not a cluster table and you can use it just like any other transparent table. BSEG is a cluster table but there is no problem selecting from it so long as you use the key of BUKRS, BELNR, GJAHR - unless you are selecting a very large amount of data, but then this can cause problems when selecting from any type of table.
The advantage of using BSEG over the other FI line item tables such as BSIS and BSIK is that it holds all the lines of an FI document while the others will hold only a subset eg BSIK will only hold lines that contain a vendor reference and BSAS holds only cleared GL account lines. Though you can only use it when you have the key. If you need to search on vendor, you can use BSIK as a starting point, but since I usually need to get hold of all the lines on an FI document, I then have to select from BSEG anyway.

Any problems using CSS3PIE?

I am modifying a template using CSS3PIE and am quite impressed. Just using it for gradients and rounded corners is a huge improvement over large image files. Have any of you had any problems implementing it in you websites?
The URL is: http://css3pie.com/

I've not used this one specifically, but I have used .htc workarounds for IE with mixed results.
http://alt-web.com/DEMOS/CSS-Rounded-Corners.shtml
http://alt-web.com/DEMOS/CSS-Shadows.shtml
Providing your layout is basic and you don't apply different values to each corner of your rounded boxes, it usually works OK. But there are many situations where .htc workarounds produce unwanted side effects -- the cure sometimes worse than the disease.
http://css3pie.com/documentation/known-issues/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Is there any problems using LabView 5.1.1 on Win2K?

I am currently upgrading the company's system from Win NT 4.0 to Win2K and I am wondering if there is any problems in upgrading LabView to Windows 2000?

No infact i'm running LV5.1.1 and LabVIEW 6.0.2 on the Win2k system.
A Rafiq
National Instruments
http://www.ni.com/support

HT201442 my iphone 5 is saying 'Activation Required' and ive had ios7 since it came out and never had any problems using it. how can i fix this ?

someone help me fix my phone i have had ios7 since it came out and it has randomly come up with 'Activation Required' never had any problems with the iphone so how do i fix this ?

Were you, by chance, running a beta version of iOS 7 on your phone?
If so, this will be the problem. You will need to log Into the private developers forum at https://developer.apple.com/support/ios/
If you are not a developer, you will need to seek help by way of your favourite search engine.

Are there any problems using the Ipad while is is plugged into the wall and charging?

Are there any contraindications using the Ipad while it is plugged into the wall and charging???

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
 Cheers, Tom

MobileMe in system preferences and Airport extreme don't recognize my password. The password and username are correct. I don't have any problem using ICloud and my Apple ID and account

When I try to connect to MobileMe in system preferences, it keeps saying that my password or username is incorrect. The same problem occurs on idisk.mac.com and when I try to connect to the hard disk connected to my AirPort Extreme. I don't have any problem to access my Apple ID account or ICloud. My password and username are corrected (I have one principal e-mail and two alternatives e-mails in my Apple ID). I don't how to solve it. The biggest problem is that I can't connect to the hard disk on the AirPort Extreme USB entrance and share files and backup.

Place the iOS device in Recovery Mode and then connect to your computer and restore to factory settings/new iPod via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Capture problem using FCP 6.0.1 on Imac 1.9 GHz

---I have come across a problem capturing DV on a sony dv deck into FCP 6.0.1. The Logging window remains black, but by using the screen on the deck I have tried to log footage anyway. When I go to capture the video all I get is slug. I have checked the settings to make certain that it is not set for audio only, I have trashed the pref's, and I have tried to do this on several of the Imacs, but cannot get the footage captured.
---I have posted this same issue on the lafcpug site but was moved from the bug catagory and hidden down on the listings. So I am not getting any help at all with this issue. I am hoping by posting here on the Apple FCP forum maybe someone will be able to tell me what the issue is.
---Thank you,
----Donovon

Well it appears as though I ran into a few bad decks in a row, go figure huh? I knew the issue did not make sense, but what are the odds of so many bad decks in a row?
---This definately goes into the oops catagory!
-----Donovon

Any problems using one Apple ID to span across 6+ devices?

Hi everyone (or at least one person with a kind heart),
I am looking for any guidance for my wife and myself. Quick background, we are both long time users of the following devices:
A) Her 4s 32 GB iPhone
B) My 4s 32 GB iPhone
C) Her old iPod
D) My Mini 64 GB iPad
E) Her 64GB iPad
F) Our 256GB Macbook Air
F is the newest member of the family. I originally had a PC Dell which I synced all of the devices to two distinct Windows accounts.
My wife's Windows account & my Windows account. We have two distinct Apple I.D(s).
Everything synced swimmingly on the old Dell. Well, the swimming got rough when my old Dell went kablooey!
Fast-forwad a few days and I swallowed my PC pride and jumped ship to a Macbook. After getting the dreaded "This computer is already associated with an Apple ID" my hunt was on for a solution as I loved my new MacBook. I did not want to revisit the PC world, again. Shortly after, I discovered and joined this-thread-already-in-progress . With no input from Apple, I thought about abandoning the idea and thought - could we (my wife and I) simply merge to one Apple ID, thus resolving the above mentioned warning that "This computer is...blah...blah...blah"?
Our storage consumption is not that large as we have always tended to have very similar libraries. We started the Apple ID's so long ago, we just got lazy and always kept it that way.
Am I not seeing some pitfall that will sour this idea? Meaning, let's say I pitch my wife's Apple ID? And we begin to use only my Apple ID?
1) My immediate concern is that I think both of our Apple I.D.'s are at the maximum of the "5 out of 5" number of device warnings due to all of the various Dell, Thinkpads and now Macbook computers I have owned over the years combined with all of the various iPhone, iPod, iPad models we have owned during the same time.
2) Besides simply picking and choosing the various new purchases under our newly merged Apple ID, is there any other sort of problem that I may not be seeing?
3) Is Apple likely to reset the "5 out of 5" ticker due to all of the above?
4) Oh yeah, I have two Apple TVs. Does that even matter?
Thanks in advance for reading this.

Razor, thank you taking the time to help out! I really mean that. In digesting your scenario and advice, I think I do have at least one question. Am I not remembering the "5 out of 5" warning correctly? You are saying 10 devices but I guess I either read it wrong (very likely) but I thought there was some limit to the number of times you transfer a library of music to a new computer (i.e. not devices)? I easily could be confused here. In reading what you wrote again, Apple wants to limit not the computer housing the library but the devices that are sharing the library? Thus, since I am only at 5 - I am good to go?
In regards to iTunes Match - we both have it (i.e. my wife and myself). So, I am covered there? All I need to do is pick one Apple ID as the "Master ID" (probably my ID), then plug my wife's devices into the MacBook, sync it and then iTunes Match should push-down-from-the-cloud all of her purchases?
That's interesting about iMessage. Not sure if I have my mind wrapped around that entirely, but I will re-read your post again. And in regards to testing my marriage with Apple ID - that rang truer than you could possibly appreciate. Or maybe not?
I probably have more questions just percolating under the surface - so I will likely holler out to you again until you get bored or annoyed with me. Something my wife says is a skill I've perfected.
Thanks again!
Glen

Processor performance on Automatic - any problems using FCP?

Similar Messages

Maybe you are looking for