Processor's - Programmer's help needed

Hi everyone, Since I didn't know where to add this message I decided to post it here because Mac Pro have the fastest processor's I've seen around computers.
Here is the thing, I would've gladly post this message in a Comments/Ideas Topic in hardware but I couldn't find any. (It would be great if Apple would make one so that they could look at people's ideas to make better PC's/processor's and maybe encourage a few who has great ideas by giving them a job in researching in Apple's greatest community).
Anyway here's my idea maybe it works maybe it doesn't, but it took me long enough to get to this conclusion:
What if processor's don't run like they should really do?
Ex.: Let's say I have an Intel Centrino Duo 2.0GHz, Hertz are Frequencies right?
If my processor has 2.0GHz than it has 2 billion Hertz frequencies in it right?
if the Hertz frequencies are all the same, then we can transfer information as like people do with the radio stations right?(Refreshment's Rate)
But 2 billions Hertz make a lot of frequencies, do you guys think it's possible that the computer doesn't know it really has 2 billions Hertz?
Let me explain where I want to go with what I've explained up there.
If it knew it, maybe we could run a program for each single Hertz/Frequency we have on the computer
Let's say: You have 2GB DDR2 Virtual Memory, and each single Byte in the 2GB DDR2 can be associated with a program that is running on the 2GHz processor's single Hertz, then we could have around 2 billions programs running at the same time right?
If the computer can only save the picture of the program on a specific frequency and keep it in mind in the 2GB DDR2 memory than it could run really fast and never lag right?
Like if 1 byte of the DDR2 Memory save a picture or a number for the picture of the program that is always streaming like it should on the Hertz frequency then it would require nearly nothing in the memory of the DDR2 Memory.
I've been looking for a lot of informations about Hertz and everything on computers, but I was wondering if it was possible to re-program a processor so it can know how many hertz it really has and everything I just said.
I have a lot of ideas for computer's technology, but I just don't know who to talk with to make my ideas come to life.
If you guys find my text interesting and think I could take computer's technology to the next step please leave me a comment or send me an e-mail.
I'd love to be in direct contact with Apple's big boss that would be great but I just don't know how.
Best Regards
Patrick Goupil
e-mail: [email protected]
Message was edited by: Goupil418

Thanks Bsic I'll try to explain it better.
Let's say computer is just an amount of pieces sending and receiving informations.
The space on that an information uses on the hard-drive/processor/video card/Virtual Memory, is at the base programmed by the constructor of the processor etc. in question.
One of my old friend told me there's some kind of memory that is going to be released in a few months, he told me it was like normal memory but with oil inside it.
He said researchers found a way to associate oil with virtual memory. But at the base, everything in computers is virtual.
So if we tell the processor that he has a part of his hertz that are used for radio frequencies who can continuously stream a program than we're already on something.
Would it be possible?
Time was invented by humans, processor's too and virtual memory also, we can modify what we create as we want, we just need to find the way to get there.

Similar Messages

  • HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

    Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

    Hello:
    I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue).  There is no sense in you wasting your time trying to troubleshoot things on a new computer.
    Barry

  • HELP NEEDED PLEASE

    Hi everyone
    Programming help needed here. Any advice would be greatly appreciated!!!
    I have been assigned some work for a program called Processing 1.0 availale at http://processing.org/download
    I was give the 9 individual programs I needed to make however they were converted to Java files from .pde files. The program is based on Java but only runs .pde files and NOTHING else!
    I decompiled the files and got the source code, but it is a slight variation of the original someone made in processing, and needs some tidying to get it to run.
    I think the programs are very simple for a programmer, although I AM NOT.
    CODE is BELOW
    // Decompiled by DJ v3.10.10.93 Copyright 2007 Atanas Neshkov Date: 02/05/2009 13:15:00
    // Home Page: http://members.fortunecity.com/neshkov/dj.html http://www.neshkov.com/dj.html - Check often for new version!
    // Decompiler options: packimports(3)
    // Source File Name: Assign2_1.java
    import processing.core.PApplet;
    public class Assign2_1 extends PApplet
    public Assign2_1()
    SquareSide = 20;
    Rank = Nums.length;
    Side = SquareSide * Rank;
    Green = color(0, 255, 0);
    Yellow = color(255, 255, 0);
    BG = Yellow;
    public void setup()
    size(Side, Side);
    background(BG);
    fill(Green);
    for(int i = 0; i < Rank; i++)
    rect(i * SquareSide, 0.0F, SquareSide, SquareSide * Nums);
    public static void main(String args[])
    PApplet.main(new String[] {
    "--bgcolor=#ece9d8", "Assign2_1"
    int Nums[] = {
    6, 14, 8, 9, 2, 3, 4, 2, 8, 3,
    9, 2, 0, 5
    int SquareSide;
    int Rank;
    int Side;
    int Green;
    int Yellow;
    int BG;
    Edited by: chevy1 on May 2, 2009 7:32 AM

    HELP NEEDED PLEASEShouting is a good way ensure you don't get help. Also you should give a meaningful subject.
    Any advice would be greatly appreciated!!!I suggest you ask a question after providing enough information to be able to answer it.
    Also use CODE tags when posting code as it make the code more readable.
    We are more likely to help people who are trying to learn Java rather than someone who might be looking for an easy way out of doing an assignment.

  • My hard drive is DEAD.I have to reinstall all my Adobe programms and I need to know exactly the correct process to do ( Indesign CS6-Photoshop CS6 - Photoshop CS5 -Illustrator CS6 - Ligntroom 4 )....

    My hard drive is DEAD.I have to reinstall all my Adobe programms and I need to know exactly the correct process to do ( Indesign CS6-Photoshop CS6 - Photoshop CS5 -Illustrator CS6 - Ligntroom 4 )....
    is any friendly tutorial available ?
    Thank you
    Albert

    If you didn't have the opportunity to deactivate the installations then you should contact Adobe Support thru chat and ask them to reset your activations for all the serial numbers involved.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache.  If it continues to fail try using a different browser.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Then you just reinstall the programs and activate using the same serial numbers.  If you need to download you can find download available thru the following links...
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
    You might also find the following helpful...
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • How can i get a photoshop file that is compatible with my mac help needed....... imac G5 power mac 8,2

    photoshop file that is compatible with my imac g5 help needed much..............

    If you go to the Apple menu and then click on About This Mac, that should tell the Mac OS X Version
    and type of Processor
    Chances are for a PowerPc processor, photoshop cs4 is the newest version you can use
    What about your laptop?
    Is it a mac as well?

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

    Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
    But not sure that my lenses will work.
    I have a 170mm/ 500mm APO Sigma.
    A 10/20 ex  Sigma   HSM  IF.
    And a 180 APO Sigma Macro or do I have to scrap them and buy others.
    ALL Help will be greatly received. Yours  BRODIE

    In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
    I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
    Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Help needed! Raid degraded again!

    Hi!
    Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
    What am I doing wrong!
    T: Ekku
    K8N Neo4 Ultra
    AMD 64 4200+
    2 Gb RAM
    2 x 250 Gb HDD (Maxtor)
    nVidia RAID (in mb)
    P.S. I wery SORRY with my poor language!

    I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
    Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
    LPB

  • HELP NEEDED WITH ADDAPTER-DVI TO VGA.

    PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
    ......THIS ENSURES NO SMOKE!!!                                                                                           
    THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
    ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

    Quote from: BOBHIGH on 17-December-05, 09:21:31
    Get over it mate !
    I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
    And why bother to reply...some people have nothing better to do.
    Yes there chep and easy to come by...Ive already got a new one.
    All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
    NO NEED TO A WANKA !!
    I feel a bann comming up.
    Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
    Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
    You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
    Google = your friend.
    Quote from: BOBHIGH on 17-December-05, 09:21:31
    it was a simple question and required a simple answer
    Simple for who ? you (buying a new one) ? me ? we ?   .really...........
    Quote from: Dynamike on 16-December-05, 04:11:48
    1: There are allot of diffrent types of those adapters.
    If any of the mods have a problem about my reply.. please pm me.

  • Help needed for grouping.

    Hi,
        Help needed .
    I have an internal table having 6 .
    Ex :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  10    10
    a     aa    12    p1  20    20
    b     aa    11    p2  30    30
    b     aa    12    p2  40    30
    Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
    To Display :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  30    30.
    b     aa    11    p2  70    60.
    can anyone help me.How to do this..?
    Thanks

    Here you go
    DATA:
      BEGIN OF cur_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(2)     TYPE c,
        f6(2)     TYPE n,
      END OF cur_tab.
    DATA:
      BEGIN OF sum_tab OCCURS 0,
        f1        TYPE c,
        f4(2)     TYPE c,
        f5        TYPE p,
        f6        TYPE p,
      END OF sum_tab.
    DATA:
      BEGIN OF final_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(5)     TYPE c,
        f6(5)     TYPE c,
      END OF final_tab.
    START-OF-SELECTION.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '10'.
      cur_tab-f6 = '10'.
      APPEND cur_tab.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '20'.
      cur_tab-f6 = '20'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '30'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '40'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      LOOP AT cur_tab.
        MOVE-CORRESPONDING cur_tab TO sum_tab.
        COLLECT sum_tab.
      ENDLOOP.
      LOOP AT sum_tab.
        READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                    f4 = sum_tab-f4.
        IF sy-subrc NE 0.
          WRITE:/ 'Something went very wrong'.
          CONTINUE.
        ENDIF.
        MOVE-CORRESPONDING cur_tab TO final_tab.
        MOVE-CORRESPONDING sum_tab TO final_tab.
        APPEND final_tab.
      ENDLOOP.
      LOOP AT final_tab.
        WRITE:/1 final_tab-f1,
              AT 5 final_tab-f2,
              AT 10 final_tab-f3,
              AT 15 final_tab-f4,
              AT 20 final_tab-f5,
              AT 25 final_tab-f6.
      ENDLOOP.
    and the output
    a   aa   11   p1     30   30  
    b   aa   11   p2     70   60  

  • Help needed on installation of Oracle 9i on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed on installation of Oracle 9i EE on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed in Finding Download location for Sun One Portal 7

    Hi,
    help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
    http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
    Please share the link for download location.
    I am totally new in Sun ONE Portal.
    Thanks,
    Edited by: 945439 on Oct 5, 2012 3:41 AM

    try edelivery.oracle.com under sun products.

  • Help needed in constructing a tree

    Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
    I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
    Please suggest me how to add the arrays to second column for parent and child nodes.
    Solved!
    Go to Solution.
    Attachments:
    Tree_fix.vi ‏15 KB

    The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

Maybe you are looking for