Processor upgrade lenovo G565

I recently purchased lenovo G565 and I love it, but the processors performance is really slow.
Can anyone direct me or tell me if its possible to upgrade to something faster?
thank you.

Hi. I recently bought a Lenovo G565 4385 for my wife and it had a dual-core Athlon II P. I upgraded it to Phenom II N660 3,0Ghz and it works like a charm. Also upgraded ram with a Corsair 8Gb kit (CMSO8GX3M2A1333C9). Ditched the HDD and replaced with Samsung 840 Pro 512Gb SSD with Windows 8.1 Pro.
I have ordered a Phenom II X640 also, just to try it out for fun. It is a 45W TDP, so it could work or not. Only thing i am worried aboyut is the POOR gpu+cpu heatsink that the G565 comes with. It is sufficient for the N660, but the X (black) - series could be overkill for it.
So the main problem with the G565 upgrades is the cooling solution, and some admin could kindly recommend something for that matter ? I have tried to search for a more powerful fan that fits to the original place and better heatsink. The original heatsink uses the same heatpipe for the gpu and the cpu, and that is a terrible solution.
So, the best fan for G565 (compatible with original seating holes) =
Possible CPU/GPU heatsink upgrade for G565 (Lenovo original/aftermarket) =

Similar Messages

Is this News about Free Processor Upgrades true? zz

Read this
"Free Processor Upgrades & Savings on T & R Series Notebooks, A Series Desktops & X Tablets" here:
http://www.fatwallet.com/cash-back-coupons/Lenovo
I bought my T61 in the last December.
I followed the link found in the webpage above, but don't know how to do the CPU upgrade?
Any tips?

Most likely means that if you buy laptop x with cpu y for $1000 they will give you an upgraded cpu for the same price.
Good luck

Lenovo G565 dont work with SATA II ?....BIOS limited ?

I bought the lenovo G565.
But that does not support SATA II?
My Hitachi SATA HD in SATA II works in SATA I !
The BIOS limits the use of SATA?
With SiSoft Sandra software is that the motherboard can work with SATA III !
chipset installed : AMD RS780/880
CPU Phenom II triple-core N830
Bios upgrade ?
Thank.

i don't think bios update will solve your issue. it's about hardware support and it seems your g565 doesn't support sata 2 interface.

Processor Upgrade for iMac G3

Hello, I didn't see any particular posts specifically pertaining to the slot loading iMac (Graphite)..I hope someone can help me out.
I have a G3 Graphite iMac, upgraded RAM currently running Tiger. I used to use it but wiped it clean, re-installied the OS and created a separate account for my 8y/o son, so essentially there aren't many apps on there. For some reason it's running slower than it should, even with just Safari open. Is there a fix or possibly a processor upgrade for this model (I keep seeing that there isn't, but I want to be sure).
It's either that or constantly hearing my son complain of the lagtime and ask for our laptops instead...

According to Mactracker at one point there was a 700 MHz model available in Graphite & Snow. If you could find a 700 MHz G3 CRT iMac logic board on eBay it might be possible to upgrade the processor speed. You could also install a Matshita SR-8184 or SR-8186 DVD-ROM drive.
There's firmware available for both drives that allow them to be flashed to RPC1 or region free meaning they can play DVDs from any region in the world. Normally the drive is restricted to being able to only play Region 3 DVDs from the US. If you order a Matshita SR-8184CD optical drive from www.welovemacs.com call their 800 number listed on their website & be sure to ask for Jessica or Faith since some of the optical drives they sell don't have RPC1 firmware available for them.

SCSI card for a G5 or processor upgrade for a G4?

Hi all
Actually, this is a question that concerns the G5 and the G4 forum, but I decided to post it here first.
So, I have this old G4/400 PCI with an Adaptec 2930 SCSI card that I use for scanning slides with an Artix 4000t sclide scanner; this works fine, but the G4 is rather slow when it comes to using some features of the scanning software, such as removing scratches.
I've been thinking about buying a SCSI card for my G5 (Dual 1.8) for some time now, but I'm not sure what card I should go for; I'm not even sure if there are still cards for such an "old" device as the slide scanner (about 3 to 4 years old, no Ultrawide or something like that). And then there's the problem of the drivers for the card - how long will they be available, especially now that Apple is switching to Intel...?
The other possibility would be to buy a processor upgrade for the G4. I've seen some at OWC, and they seem to be less expensive than a SCSI card. The drawback of this solution is of course that I'll have to keep the G4 standing on my desk... on the other hand, I do know that the scanner will work perfectly with the G4.
The G5, on the other hand... it will be faster and easier, since I won't have to transfer the files for storage and editing, I could free some space on my desk,... but will it work? The G5 is running 10.4, I'm not sure if my current scanner driver is compatible... and what when 10.5 comes out...?
So I'm looking for a second, third, fourth... opinion:
What would you do? Get a SCSI card for the G5 or a processor upgrade for the G4? What SCSI card would you recommend?
TIA,
Tina

I've done some research on G5 and SCSI and scanners, and obviously, what I remembered was correct... making it work seems at least tricky, and maybe expensive too (if you've got to buy new scanning software and and..).
So I guess that's decided: No SCSI on the G5. Leaves the question, should I buy a processor upgrade card for the G4? Getting some dual G4 on eBay might be an option, but then, that would be another computer in my already crammed office, and I just can't throw the G4 away, it's one of the very first models...
I came by the idea of a processor upgrade because I just played around with an old Mac SE, which has an 68030 accelerator card installed, and this seems to work fine. Anyone has any experience with G3 /G4 upgrades (good or bad)?
Smokerz: Why would you not recommend an upgrade? Any bad experiences?
Tina

2 2.66 Ghz Dual-Core Intel Xeon processor upgrade

I have a question about my Mac Pro.I don't know if you can answer it or point me in the right direction. I have a 2006 Mac Pro 2+2.66Ghz. Dual-Core Intel Xeon with 8 GB 667 Mhz DDR2 FB-DIMM Ram.What types of upgrades can I do to make this a faster machine? Processor upgrade? or should I just by a new Mac Pro?

Selling the old one and buying a new one is the easiest way.
Macs tend to keep a much higher value then PC.
Allan

Processor upgrade is this possible

I have a broken 1.8ghz G5 which according to the apple repair centre has a faulty processor, (not happy only 18 months old and only used about once a week).
They are wanting £340+vat to fix this, but i can get hold of a second hand 2.0ghz processor for about £160 would this processor work with my mac? and is it easy to install, i work as a pc engineer so i'm ok with the taking pc's to bits.

There is some discussion of this subject which you can read if you enter say, "processor upgrade" (without the quotes) in the search box at top right of this forum
http://discussions.apple.com/search.jspa?objID=c108&search=Go&q=processor+upgrad e

Why is it that the new macbook pro processor upgrade option only offers up to 2.8 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz Intel Dual Core i7 Macbook, is the new one tuned to go much faster anyway?

Why is it that the new Macbook Pro processor upgrade option only offers up to 2.8 Ghz boosting to 3.3 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz boosting to 3.6 Ghz Intel Dual Core i7 Macbook, is the new one tuned somehow to go much faster anyway, or will the new one be slower in fact? Or does the solid state drive compensate for the lack of increased processor capacity?

The CPU's come from different Intel 'families'. The older ones are 'Ivy Bridge' and the newer ones are 'Haswell'. Numbers alone will not determine the efficiency of CPU.
Ciao.

Need Original BIOS Rom for Lenovo g565 (Mod.4385)

Messed my BIOS up, with a 560 BIOS (i know my own fault!) and need a original rom for recovery.
where to download?

the official download page doesn't have any bios update but i found one above. but, due to it's not official bios update, it may void the warraty and can brick the mainboard, use it on your own risk.
http://www.bios-mods.com/forum/Thread-Removed-Lenovo-G565-BIOS-Insyde-H2O-edit-Whitelist-or-remove-i...

Memory vs. Processor upgrade? Processor upgrade requires OS 9?

I have a Power Mac G4 QS with a 733 MHz processor and 640 MB of RAM. I plan to use it mainly for video editing, and was thinking about upgrading the processor or RAM or perhaps both. My first question is, should I should upgrade just one (processor OR memory) or both?
My second question requires a bit of explaining. I've already installed all of the software I will be using before realizing that this computer didn't have a version of OS 9 installed (I'm running 10.3.8, I think; I'm actually not on that computer at the moment, so I can't check). I've read that in order to perform a processor upgrade, you have to run a firmware upgrade that only works in OS 9.2.2, so I was wondering, how add OS 9 on to the computer without messing up my OS and/or wiping out all of the software I've already installed?
(Yes, I'm a Mac newbie, at least as far as installation goes.)
Power Mac G4 Quicksilver 733 Mac OS X (10.3.8) 640 MB RAM, 40 GB HD

Hi,
CPU's:
This processor is available, it does NOT need a manufacturers Firmware installed. It is also a dual processor and will work very well for video processing. This is a bargain, very fast too.
http://www.yourmacstore.com/shop/shopexd.asp?id=548
This dual processor needs manufacturer's Firmware installed but does NOT need Mac OS 9.2 for the install. It starts the Mac from a Disk and installs the Firmware for it, simple - just follow directions.
http://eshop.macsales.com/item/Newer%20Technology/MAXG48D1700/
•••Only Sonnet upgrades still require you to boot into Mac OS 9.2.2 for the Firmware install.
Memory:
The prices are down right now, you can get a stick of 512MB RAM for $59, see this:
http://eshop.macsales.com/item/Other%20World%20Computing/133SD512328/
The above are some places to look at CPU's and memory. The first CPU and two sticks of 512MB RAM for a total of less than $600 will make your QS quite fast.
That seems a good deal to me, if you like the computer you currently have.
The new computer is always an option.
Regards,
Dave
no comp...

New Sonnet Encore /MDX G4 processor upgrade?

I looking at New Sonnet Encore /MDX G4 processor upgrade.
http://www.sonnettech.com/product/encoremdxduet.html
Do you think that would make my Power Mac G4 MDD (if I got Dual PowerPC G4 7447A CPUs running at 1.8 GHz) about as fast as my iMac G5 1.8 or my MacBook 1.83 ?

My Dual 1.25 is just as fast as the iMac G5 1.8 it replaced.
Your MacBook beats all of these machines, it is a Dual-Core processor, and it's a newer chip that beats any PPC except the Dual G5's.

Powermac 7300/166 processor upgrade

Thanks to help elsewhere on this forum my 7300/166, with all its limitations of speed and 128mb memory, is back in business, and I'd like to upgrade the processor if it could be done without spending too much money. Advice, as specific as possible and suitable for a novice, would be appreciated about what to look for, bearing in mind that I'd most likely be searching on e-bay.

You'd be looking for a G3 or G4 processor upgrade card for the "PCI Mac" (7300, 7500, 7600, 8500, 8600, 9500, and 9600) series. Sonnet, PowerLogix, and NewerTech are some of the manufacturers' names that you'll come across. The processor card plugs into the slot, just as the 7300/166 card does. Some of the cards are physically shorter and have a metal strip mounted along the top edge of the card, so that the card stabilizer on the underside of the hinged plastic panel contacts the card. I'd look for a Sonnet card, but that's just my preference. You can also buy what's called a ZIF carrier card, which resembles a processor card, but has a ZIF (Zero Insertion Force) socket for installation of a G3 or G4 "ZIF type" processor. ZIF processors are the same type used in the beige G3 series, B&W G3 series, and G4 PCI Graphics model. The carrier card provides the flexibility to install (and later change/upgrade) a ZIF processor/speed of your preference.
The one limiting factor when using a G3/G4 processor in an older PCI Mac is the 50 MHz (max) system bus speed. Some users have overclocked this a little, but stability issues can result if you push it too much. You'll definitely notice a speed/performance difference with a G3 or G4 processor, compared to a 604e/166 MHz processor. As I've written before, a G3/G4-upgraded Power Mac will never be the equal of a G3 or G4 Mac with the same processor. Even though the original purchasers paid a lot of $$ for these upgrade cards 3-5 years ago, they have depreciated quickly and often go for very little at eBay.

Equium P200-1ED and processor upgrade

Hi
I have installed an 64GB SSD and installed Windows 7 with user and program data folders on an SD card installed as USB drive through the Expresscard slot. I have also put in 4GB of RAM
It is still slow browsing the web even through wired Ethernet. So I am considering upgrading the processors as the bottle neck appears to be definitely on the processor which is an Intel Dual T2310 @1.46 GHz.
So the question is what is the next possible processor upgrade?
Thanks

On the question of processor upgrade:
I have already upgraded the BIOS and the Intel Chip set driver.
The problem is that this model is discontinued and I can't find much information on it.
I got this old Lap Top for free, I have got an 64GB SSD for 25, 64GB SD and express-card adaptor 30 and the 2X2GB RAM for 19.00. So if a new processor can make it fast enough then it will be worth another $20-$40 expense considering that I saw a used one advertised on Amazon for 245.00.
I know that it can support T3700 with L4 cache. Considering that a 2.GH can be bought for around $20.00. I though I might as well see if it can support something even faster how much that is.
How ever I get the the your point but I just don't know what is slowing this machine down.
When I change tab or reload a form it takes time before I can see the response to the keyboard input.
I have checked the page faults but I don't see anything there.
I wonder if I change to no paging, now that I have and SSD in there. So, any ideas would be welcome.
I doubt the network connection is a problem because I have fast broadband and I have tested it wired and wireless and as I said, I have a desktop running the same OS with 64BG SSD and 4GB RAM and it is a hell of a lot faster but that one has a quad Intel processor. The only other difference is that on the desktop the user folders are not moved to another drive but that is because I don't have and SD slot on the other one and surely SD is a lot faster than HHD.
So, what else could be holding it back? Feed backs would be appreciated.

Powermac G5 processor upgrade dual 1.8 to dual 2.0

I've got 2 G5 towers I bought cheap from eBay and CL. One is a dual 1.8 and the other a dual 2.0. It's a long story but essentially the dual 2.0 has been gutted. I'm wondering if I could simply remove the dual 1.8 processors and replace them with the dual 2.0 processors? I figure I might as well have 1 machine optimized. Would there be any issues with the logic board or power supply with the processor upgrade?

If one of the computers does run I'd leave it as is. There is nothing to gain going from 1.8 to 2.0 GHz cpu.

Processor upgrades

i have had a single 1ghz mdd firewire 800 for about a year. i had great plans for this machine but it is basically a print server for my g4 imac in the living room. recently i purchased a 400 mhz sawtooth to replace the mdd. Is downgrading from a mdd a good idea? i plan on selling one of the powermacs. if i decide to upgrade again which is easier/cheaper to upgrade? there are a lot more processor upgrades for g4 models earlier than the mdd and i am not sure why. i purchased the mdd for around $400. i purchased the sawtooth for $10.

eighth-1der wrote:
My LW 16/600 will work with the Wintels if hooked via parallel or via ethernet reversed pair cable (single cable with one reversed pair). But if I hook the LW to a hub or to the router the only units that can see it are the Macs. I just turn on sharing on the Mac and make a printer profile in the Windoze control panel that routes to my mac (\\xxx.xxx.x.xxx\<mac name>\<OSX printer profile>). I imagine it has something to do with the protocols back in 1995 when the HP4 was being made as a LW.
But if you say that your HP5 will show up when hooked to a hub but not a router I may try that, isolate the Wintels and the LW on the hub and then hook the hub to the router. Is that essentially what you are describing? A reversed pair cable is a two unit closed loop hub, so the same effect as I described before will apply, right? But current setting of letting OSX discover the LW and letting the Wintels use the Mac to print is no real drag, just a few watts of power for an otherwise unused computer.
My HP LJ5MP worked with the PhoneNet/EtherMac connection to its AppleTalk port back when I just used the old 10BaseT hub for my LAN and internet connection (before modern router and switches). However, the new switch technology doesn't recognize the EtherMac output, which is the AppleTalk input. I found that when I put the hub in between the EtherMac and the new switch, the switch recognized the hub, which recognized the EtherMac and everything worked on my LAN. With this setup, both my Mac and my PC notebook on my LAN could see and use the HP LJ5MP.
Alternatively, I later bought a D-Link parallel port print server for the HP LJ. It works quite well on my LAN and is a little bit faster than the AppleTalk/EtherMac/hub setup. I currently have both connections to the HP LJ 5MP hooked to my LAN. I do it for redundancy, as the two different connections function independently of each other, so if there is a problem with one, the other usually works. This is important to me as the HP LJ is my primary printer for all my computers.
Carl B.

Processor upgrade lenovo G565

Similar Messages

Maybe you are looking for