ProcessTrain with maxPathKey result in strange behavior

Hello,
I have a process train with 5 nodes that works as expected in Plus-one mode. However I would like to use the Max visited model, so I added the maxPathKey property to my faces config with a value of 1. The behavior i'm getting is as follow:
When I complete the fist page and click on "next" the second page is displayed but the next button is not displayed, so I cannot continue with the process. However if I click on the "previous" button to go back to the first page and click "next" again to go to page two, then the "next" button on page two will display.
Is this a bug in the process train ?

While a trailing period may be acceptable to a Mac, it is not acceptable to the Windows OS. If you were to connect to your server via AFP (Apple Filing Protocol) then you would be able to preserve the period at the end of the filename because File Services for Macintosh would make the translation from the illegal character to something that could reside on the server.
However, since you're using SMB, you're not using File Services for Macintosh.
Your options are to either use AFP and File Services for Macintosh on your Windows server or use SMB and remove the trailing periods.
Have a look at this page on Microsoft's site for more information http://support.microsoft.com/kb/q117258/.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.4)

Similar Messages

Adding custom navigation rules results in strange behavior

Hello,
We'd like to add navigation rules to our application. To avoid post-JHeadstart-generation-steps we created an extra faces-config-custom.xml file which contains the navigation rules. When adding this file to the web.xml and run the aplication we encounter strange behavior
- Errors are shown in duplicate
- 'Transaction completed' messages are not shown
Try adding the underneath faces-config-custom.xml to a standard HR demo project and you will get the same behavior.
(1) What is the reason of this strange behavior?
(2) How can we add custom navigation rules, without having to do post creation steps?
Regards Leon
[faces-config-custom.xml]
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>BezwaarVerzoeken</from-outcome>
<to-view-id>/pages/inboeken/BezwaarVerzoeken.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>LosseOpdrachten</from-outcome>
<to-view-id>/pages/inboeken/LosseOpdrachten.jspx</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
[Add faces-config-custom.xml to web.xml]
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config-custom.xml,...

Leon,
When you perform a drag and drop operation, JDeveloper adds the following lines to the faces-config.xml:
<lifecycle>
<phase-listener>
Oracle.adf.controller.faces.lifecycle.ADFPhaselistener
</phase-listener>
</lifecycle>
However, JHeadstart uses its own subclass of ADFPhaselistener, and defines the lifecycle element in JhsCommon-beans.xml. Due to a bug in ADF, ADF does not look for the lifecycle element in other files than faces-config, and adds its own element in faces-config.xml If you remove these lines, everything works fine again.
To prevent this from happening again, you can move the following entry from JhsCommon-beans.xml to faces-config.xml:
<lifecycle> <phase-listener>oracle.jheadstart.controller.jsf.lifecycle.JhsADFPhaseListener</phase-listener>
</lifecycle>
And then make a custom template for JhsCommon-beans.vm where you remove this entry.
Steven Davelaar,
JHeadstart team.

Trackpad Bug in 10.9 (click is delayed, results in strange behavior)

Hi everybody,
Since updating my Macbook (5,1 late 2008, SSD, 8GB-RAM) to 10.9 Mavericks my trackpad behaves buggy in the following way:
When I press down the trackpad with one finger the corresponding "reaction" seems to be delayed (not every but most of the time).
This results in real annoying behavior when you try to select some text with the cursor, or try to move a tab or file etc.
Sometimes, also "tracking" is lost while selecting or drag&drop operation thus resulting in unselected lines of text, or files or tabs lost on drag.
I updated from 10.6.8 (Snow Leopard) and the described bug has never occurred before the update.
Is this a known bug? Does Apple work on it for 10.9.1? Any suggestions?
Thanks.

Thanks four your reply.
I already looked at the metalink doc. It lists 4 bugs introduced in 10.2.0.5, but none of them seems related to my problem. Did I overlook something?
Regards,
Henk

Spry Image Slideshow with Filmstrip (1.0) - strange behavior

I am developing a fairly simple website based on Adobe's fixed two-column, header & footer template. The left column is now 180 px wide, with the right column being 630 px. When I place the Lightbox Gallery Widget into the editable region of the main content area, it works fine. When I place the Wanderlust theme Spry Content Slideshow, it works fine. When I place the Spry Image Slideshow Basic, it works fine. But when I place the Spry Image Slideshow with Filmstrip, it works sorta... The navigation buttons work but are displaced toward the top of the image area and the photos are significantly below them. It works, but it look terrible. (see below) When I place the same widget into a blank HTML page it works fine, there is no displacement. I have tried resizing just about everything including the main content area width, the view port, etc. It does not matter if I use the default or an edited version of the widget. What am I doing wrong? Or what do I need to change? I really like the way the widget looks, but cannot get it to work.
I am doing all of this in CS5 on a Mac (10.6.4).

vw2ureg,
Thanks for your help. I, too, was able to get it to work with a page with the default two-column, fixed template. I must have made an error in resizing the template and/or am resizing the widget incorrectly. I think my dimensions for the template are as follows: left column (180 content, 20 left padding, 10 right padding, 210 total) and main content (210 left margin, because the left column is floated; 630 content, 20 left, 20 right padding, 670 total). Which both fit into a container of 880px. Correct? Yet even when the widget view port is sized to 600, I still get the effect shown in my original post. FYI, in order to reduce sources of error I have stuck with the demo images rather than inserting my own at this point.
Once again, I do appreciate your help. Although I'm very much the newbie at this, I'm finding it very interesting.

Strange behavior with Collections

Hello!
I have a - from my point of view - strange behavior with a List (same also applies to Vector, LinkedList, and others):
List<String> myList = new myList<String>;
myList.add("One");
while (true) {
try {
System.out.println(myList.size());
throw new Exception();
} catch (Exception e) {
e.printStackTrace();
}And the result is 1, 2, 2, 2, ...although I added only one element. The two elements in the List point to the same object.
What could case this issue?
Regards,

len00x wrote:
List<String> myList = new myList<String>;This doesn't even look like it will compile for at least one reason, easily two.

Strange behavior of system with enabled FileVault2, Roaming profile

Hello,
I have encountered strange behavor of my Macbook Air after some testing.
Macbook Air 2012 was newly installed with 10.8.4 and joined network account server on 10.8.4 server with Roaming profile (synced with server home directory). After installing some basic apps like iWork I turned on FileVault.
Then I start to have the strange behavior - iWorks are not displaying content of document - it seams blank - just white screen without any borders where should be at least lines in numbers or empty cells.
Another display problem is in Safari. On same pages (even default Top SItes) it`s flashing and especially when scrolling.
Did you encountered something similar? I`m not able to get rid of it.
Computers was used for some time before turining on FIle Vault and problem started to occur after this action. Disabling of FileVault didn`t helped (properly restarted between steps).
I didn`t found anything strange in Console or elsewhere..

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Strange behavior with csv flat file integration

Hi,
i've a real strange behavior with csv flat file integration.
I've defined the file inbound with | as separator
Here is the sender payload result, extra columns appears !
<row>
<VAL1>D</VAL1>
<VAL2 />
<VAL3>01</VAL3>
<VAL4 />
<VAL5 />
<VAL6>003160000</VAL6>
<VAL7 />
<col>003160001</col>
<col />
<col>2</col>
<col />
<col>91200604212</col>
<col />
<col>VIRTUAL DJ HOME EDITION</col>
<col />
<col>2</col>
<col />
<col>2</col>
<col />
<col />
<col>2</col>
<col />
</row>
When i changed the separator to ; in my file and in the file inbound it gives the following.
Everything is ok.
<row>
<VAL1>D</VAL1>
<VAL2>01</VAL2>
<VAL3 />
<VAL4>003160000</VAL4>
<VAL5>003160001</VAL5>
<VAL6>7</VAL6>
<VAL7>91200604212</VAL7>
<col>VIRTUAL DJ HOME EDITION</col>
<col>10</col>
<col>10</col>
<col />
<col>10</col>
</row>
Why using a different separator would change the payload ?
It will be a good thing for me if I could use the pipe separator.
Thanks

Can you give the steps you're using to get this error? I'm not seeing any problem here.
1) Create a new audio project (44.1 KHz).
2) Arm the record head in track 1 by pressing the "R" button in that track. Verify audio levels.
3) Record by pressing the record button in the audio controls.
4) Stop recording by pressing the stop button.
5) Play back the resulting audio. Sounds fine.
6) Select File > Export.
7) Change the file format to WAVE file. Change the bit depth to 16 bit, change the sample rate to 44.1 KHz.
8) Type the name SAVETEST.wav and click on the Export button.
9) Play back the resulting WAV file in QuickTime Player, Apple Loops Utility, etc. and it seems just fine.
What am I missing that you're doing?

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange behavior in a table with dropTarget and delete action

I am having a strange behavior in a table with drag and drop and action component to delete row.
Steps:
Drag the first row to the table and appears in the destination table (works well)
Select and change the value by 156, appears an error (works fine)
delete the row, the row disappears (works well)
Add the first row again and the value is 156 instead of 158 (why ????)
I guess the error is the deletion that is not correct, but do not know how?
Can anyone help?
I add the source code if you see where I'm wrong
Java class:
+public class BeanExample {+
private ArrayList<RowExample> starttValues;
private ArrayList<RowExample> endValues;
+public BeanExample() {+
super();
+}+
+public void setStarttValues(ArrayList<BeanExample.RowExample> starttValues) {+
this.starttValues = starttValues;
+}+
+public ArrayList<BeanExample.RowExample> getStarttValues() {+
+if (starttValues == null) {+
starttValues = new ArrayList<BeanExample.RowExample>();
starttValues.add(new RowExample("1", new Number(158)));
starttValues.add(new RowExample("21", new Number(12565464)));
+}+
return starttValues;
+}+
+public void setEndValues(ArrayList<BeanExample.RowExample> endValues) {+
this.endValues = endValues;
+}+
+public ArrayList<BeanExample.RowExample> getEndValues() {+
+if (endValues == null) {+
endValues = new ArrayList<BeanExample.RowExample>();
+}+
return endValues;
+}+
+public void validatorExample(FacesContext facesContext, UIComponent uIComponent, Object object) {+
Number number = (Number)object;
+if ((number.longValue() % 2) == 0) {+
FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR, "ES PAR", "ES PAR");
throw new ValidatorException(message);
+}+
+}+
+public DnDAction handleDrop(DropEvent dropEvent) {+
Transferable transferable = dropEvent.getTransferable();
DataFlavor<RowKeySet> rowKeySetFlavor = DataFlavor.getDataFlavor(RowKeySet.class, "loteDrag");
RowKeySet rowKeySet = transferable.getData(rowKeySetFlavor);
+if (rowKeySet != null) {+
CollectionModel dragModel = transferable.getData(CollectionModel.class);
+if (dragModel != null) {+
Object currKey = rowKeySet.iterator().next();
dragModel.setRowKey(currKey);
RowExample table = (RowExample)dragModel.getRowData();
getEndValues().add(new RowExample(table.getId(), table.getValue()));
return dropEvent.getProposedAction();
+}+
+}+
return DnDAction.NONE;
+}+
+public void borrarFila(ActionEvent actionEvent) {+
endValues.remove(0); RequestContext.getCurrentInstance().addPartialTarget(FacesContext.getCurrentInstance().getViewRoot().findComponent("pc1:t2"));
+}+
+public static class RowExample {+
private String id;
private Number value;
+public RowExample(String id, Number value) {+
super();
this.id = id;
this.value = value;
+}+
+public void setId(String id) {+
this.id = id;
+}+
+public String getId() {+
return id;
+}+
+public void setValue(Number value) {+
this.value = value;
+}+
+public Number getValue() {+
return value;
+}+
+}+
+}+JSF
+<?xml version='1.0' encoding='windows-1252'?>+
+<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"+
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
+<jsp:directive.page contentType="text/html;charset=windows-1252"/>+
+<f:view>+
+<af:document id="d1">+
+<af:form id="f1">+
+<af:panelGroupLayout id="pgl1">+
+<af:table value="#{beanExample.starttValues}" var="row"+
rowBandingInterval="0" id="t1" rowSelection="single"
displayRow="selected" contentDelivery="immediate">
+<af:column sortable="false" headerText="Id" align="start" id="c2">+
+<af:outputText value="#{row.id}" id="ot1"/>+
+</af:column>+
+<af:column sortable="false" headerText="Value" align="start" id="c1">+
+<af:outputText value="#{row.value}" id="ot2"/>+
+</af:column>+
+<af:collectionDragSource actions="COPY" modelName="loteDrag"/>+
+</af:table>+
+<af:panelCollection id="pc1">+
+<f:facet name="toolbar" >+
+<af:toolbar id="dc_t2" >+
+<af:commandToolbarButton shortDesc="Delete"+
icon="/imagesDemo/delete_ena.png"
id="dc_ctb3" immediate="true"
+actionListener="#{beanExample.borrarFila}"/>+
+</af:toolbar>+
+</f:facet>+
+<af:table value="#{beanExample.endValues}" var="row"+
+rowBandingInterval="0" id="t2">+
+<af:column sortable="false" headerText="Id" align="start" id="c3">+
+<af:outputText value="#{row.id}" id="ot3"/>+
+</af:column>+
+<af:column sortable="false" headerText="Value" align="start" id="c4" >+
+<af:inputText value="#{row.value}" autoSubmit="true" id="it1" validator="#{beanExample.validatorExample}"/>+
+</af:column>+
+<af:collectionDropTarget actions="COPY" modelName="loteDrag"+
+dropListener="#{beanExample.handleDrop}"/>+
+</af:table>+
+</af:panelCollection>+
+</af:panelGroupLayout>+
+</af:form>+
+</af:document>+
+</f:view>+
+</jsp:root>+

I think the problem is the validator
I changed the practical case, I added an InputText to enter new values in the first row.
+<af:inputText immediate="true" label="new value" id="it2"+
+valueChangeListener="#{beanExample.newvalue}" autoSubmit="true"/>+
+public void newvalue (ValueChangeEvent valueChangeEvent) {+
+String valor = (String)valueChangeEvent.getNewValue();+
+Number valorNumber=null;+
+try {+
+valorNumber = new Number (valor);+
+} catch (SQLException e) {+
+}+
+RowExample example = (RowExample) endValues.get(0);+
+example.setValue(valorNumber);+
+example.setId(valorNumber.toString());+
+RichTable table = (RichTable)FacesContext.getCurrentInstance().getViewRoot().findComponent(id);+
+RequestContext.getCurrentInstance().addPartialTarget(table);+
+}+
Case 1
I drag the first row to the target table (ok)
The new row appears (ok)
Enter the value 77 in the InputText (ok)
id content and value change (ok)
Case2
I drag the first row to the destination table
The new row appears (ok)
Change the value of the first row by 80 (ok)
errors appears (by validator) (ok)
Enter the value 77 in the InputText (ok)
the id is changed but the value NO (*KO*)
I do not understand the behavior
Edited by: josefuente on 27-oct-2010 16:03

Strange behavior with System.out.println

I was working with the following code:
1. public class DemoChar {
2. public static void main(String args[]) {
3.
4. char buf[] = new char[50];
5. buf[0] = 'a';
6. buf[1] = 'b';
7. buf[2] = 'c';
8. buf[3] = 'd';
9. buf[4] = 'e';
10. System.out.println( buf);
11. }
12. }
if you print "buf", it really works; however if you change line 10 by :
System.out.println("--->" + buf );
The method "println()" doesn't write "--->abcde". The functionality doesn't the same. It will appear "----> [C@3e25a5"
Could you help me?
I don't understand that behavior. I am using "java version 1.6.0_07"

buf's an array and thus is an object. object's don't inherently know how to represent themselves as Strings, so you have to do other things to make sure that they print out ok. To get a char array to print well, you could use the String method valueOf(...):
public class DemoChar
public static void main(String args[])
    char buf[] = {'a', 'b', 'c', 'd', 'e'};
    System.out.println(buf); // this seems to call implicitly String.valueOf(buf)
    System.out.println("--->" + buf); // this however seems to call buf.toString() with different results
    System.out.println("--->" + String.valueOf(buf));
}Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, you can will need to paste already formatted code into the forum, highlight this code, and then press the "code" button at the top of the forum Message editor prior to posting the message. You may want to click on the Preview tab to make sure that your code is formatted correctly. Another way is to place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}Edited by: Encephalopathic on Aug 21, 2008 9:40 AM

Strange behavior with Firefox

Hi Team,
I am using HTMLDB V2.0 and Firefox V1.5.0.1. I used wizard to create a report/form application. However, when I press a button to update the form all the buttons line up in a vertical row and I then have to press the same button again.
My application is 30412 at htmldb.oracle.com. The problem is occurring at page 4. Go to page 3 (2nd tab) and select any record. You will be directed to page 4. Then when you press any button (cancel, create, delete, apply changes) on page 4, page 4 is refreshed and the buttons strangely line up in a vertical column. I then have to press the same button again before the update occurs.
I have the same report/form setup on pages 1 and 2 and it is working fine on those pages.
This strange behavior is not occurring in IE. I also notice that the font size is bigger in IE .
I would appreciate any help you might offer.
I really enjoy working with HTMLDB.
Thanks, Andy

Sorry about that. I removed all the authorization schemes from the application. I also changed the authentication scheme to HTMLDB. Let me know if I need to do something more for you to get access.
Thanks for looking at it.
I think it may have something to do with the "button, alternative 3" template from theme 3 that I am using. When I switch to the "button" template from theme 3 then the strange behavior goes away in Firefox.
Andy

Strange behavior with obssocookie on different browser

Hi,
I am trying to integrate OAM with our application deployed on WLS. I have set up an IIS proxy server and installed a web gate on it. I have seen a couple of strange behavior
1) If I try to access some static image file, SSO keeps asking for authentication. It happens for both firefox and IE, but it doesn't happen for chrome though. Looks like for image file request, the obssocookie is not passed correctly. Anyone sees that before?
2) If I use firefox on the machine where WLS app server is installed to connect to proxy server, if I use hostname in the URL, I don't see the obssocookie. If I use IP address in the URL, I can see obssocookie. If I use IE or any browser from any other machine, obssocookie is always available
thanks.
-Wei

I found it in the document
B.1 How Logout Works
The WebGate logs a user out when it receives a URL containing "logout." (including the "."), with the exceptions of logout.gif and logout.jpg, for example, logout.html or logout.pl. When the WebGate receives a URL with this string, the value of the ObSSOCookie is set to "logout."
The Access System sets an obSSOCookie for each user or application that accesses a resource protected by a WebGate. The obSSOCookie enables users to access resources that are protected by the Access System that have the same or a lower authentication level. Removing the ObSSOcookie causes the WebGate to log the user out and requires the user to re-authenticate the next time he or she requests a resource that is protected by the Access System.
Well, I havn't got that far in the document:)
Thanks a lot for your help.
-Wei

ProcessTrain with maxPathKey result in strange behavior

Similar Messages

Maybe you are looking for