Procob32 oracle component is not installed
Hi All,
procob32 oracle component is not installed in my VM . i checked in oracle_home/bin directory. it is not there . o/s version is linux and my oracle version is 11.1.0.7.0 . so can anyone help me how to install this particular procob32 component?.
Hi, Jasmine!
I had the same problem today and contacted Apple. They suggested deleting the SC Info directory but, it had no effect. The other suggestion they provided me was to completely remove iTunes, reinstall it, and reauthorize the computer. I followed the directions EXACTLY as indicated in the article listed below, and now everything is fine again.
Since you are unable to authorize your purchases just like I was, I would recommend uninstalling/reinstalling iTunes.
To uninstall iTunes, please follow the steps in this article:
Removing iTunes for Mac OS X
http://support.apple.com/kb/HT1224
After you've uninstalled iTunes and removed the related files, you will need to reinstall it. You can download the latest version (which is 9.1) free of charge from the iTunes website:
http://www.itunes.com/download
After you've reinstalled iTunes, please ensure you have the latest version
of QuickTime installed. iTunes 9.1 requires QuickTime 7.6 or later. You can find the latest version here:
http://www.apple.com/quicktime/download
I hope this works for you. It did for me.
Similar Messages
-
I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.
Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0 -
When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M. -
Him
Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)." I have researched this on Google and I have not read of any solution. Please advise.Here you go: http://support.apple.com/kb/HT1923
There are three steps so make sure you follow all of them. They are:
remove iTunes and everthing related to it
verify everything is really removed
reinstall iTunes. -
TS1717 a required itunes component is not installed.(-42404)
Hi There..I updated my itunes (running on Windows 7) to the latest version(11.0.3) then whenever i open it it gives me an error message saying that a required itunes component is not installed(-42404). Also can't sync my iphone anymore. I've tryed repairing but still the same problem exists..HELP PLEASE
Sometimes this one indicates that your FairPlay is broken, but other components might be dodgy.
Let's try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does that help with your 42404? -
Required Itunes component is not installed -42404
My system is Windows 7 64bit. After the iTunes update to 10.3, iTunes is now unusable, will not reconize my iphone.
Get the following messages
Required iTunes component is not installed -42404
Could not purchase required iTunes compoenet is not installed.
I got a message that my IPhone was not reconnized also and that I needed to re-set to factory default which I did, but now I lost all the apps on the iphone and I can not reinstall iTunes without receiving these error messages. No problems with Itunes until this new update.
I have followed the suggestions to completeley uninstall iTunes and all the components including QuickTIme and MobileME. I have done this 3 times now. The last error message was regarding iTunes Helper.
Really frustrating as I can not install Itunes so that I can reinstall my apps and music on my iPhone. Any help would be greatly apprecaited.Hi, I've had exactly the same issue as the chap who first posted. Don't really want to have to re-install iTunes and lose all the stuff/iPhone backups I've got on there. I've rune the diagnostics as mentioned; please see below:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
INTELR AWRDACPI
iTunes 10.4.0.80
QuickTime 7.6.9
Apple Application Support 1.5.2
iPod Updater Library [Error:0000000D]
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0012ACB80A0DBBB8
Current user is an administrator.
The current local date and time is 2011-08-16 21:28:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 6800
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d5b1c7246190ab8289f67d3e590bcbb3
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {711D230C-2B09-4DF9-B298-0F8A66D46DD0}
Description: NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter - Packet Scheduler Miniport
IP Address: 192.168.1.66
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Tue Aug 16 21:22:10 2011
Lease Expires: Wed Aug 17 21:22:10 2011
DNS Servers: 192.168.1.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-08-16 21:24:16.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0), Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp CD/DVDW TS-H552U, Rev US06
Audio CD in drive.
Found 12 songs on CD, playing time 51:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:44:68
Track 3, start time 07:07:08
Track 4, start time 11:12:72
Track 5, start time 15:30:35
Track 6, start time 20:39:22
Track 7, start time 25:50:40
Track 8, start time 28:54:65
Track 9, start time 33:01:69
Track 10, start time 38:22:40
Track 11, start time 41:58:62
Track 12, start time 45:58:43
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 40.
The drive CDRW speeds are: 40.
The drive DVDR speeds are: 40.
The drive DVDRW speeds are: 40.
**** Device Connectivity Tests ****
iPodService 10.4.0.80 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 4.3.3
Serial Number: 86*********
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
Any help much appreciated! -
A required iTunes component is not installed 42404 with iTunes 10 after update
Hi,
So I updated last night to the latest iTunes and now whenever I start the program I get this error:
A required iTunes component is not installed... - 42404...
I've tried uninstalling and deleting the iTunes preferences but it keeps on popping up. I can't sync my iPhone with it like this. Should I reinstall the Mobile Device stuff?
ThanksSometimes this one indicates that your FairPlay is broken, but other components might be dodgy.
Let's try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does that help with your 42404? -
Itunes 8 - won't run - a required i Tunes component is not installed
I upgraded to iTunes 8 last night and following the install when trying to open open i receive the following error.
*"The itunes application could not be opened. a required iTunes component is not installed. Please repair or reenstall Quicktime (-42404)"*
I have re-installed both applications, uninstalled and re-installed, attempted to repair quick time still not working.
quicktime works ok, click on the icon and it oipens up and plays fine.
Please help. I just purchase my iphone yesterday also, an i am unable to activate it as i can't get i tunes to work.
thanks in advanceTo begin with, i tunes just quit working one day. it wouldn't open anything read any cds and ever time i tired to open it, it just popped up and error that it needed to be debugged or such. I had someone come look at it and they kinda sorta fixed it. i can now open it and listen to music. but i have to convert everything myself and add all my album work and it still wont rip cds or connect to my ipods. it says i need to have a 7.6 version or later. i went to download the new 8.0 verison and when it got to the end of installtion a box popped up that acess was denied and that it encoutered a error i always went and tired to reinstall quicktime and i tunes and deleting everything from it, and then when i tired to reinstall everything it still wouldn't install, its begginning to become very annoying and no one else knnows what to do.and i really need someones help... pLZ!!!!!!!!!!
-
When I open iTunes, this window pops up. "A required component is not installed. Please reinstall iTunes. (-42076)" I have not been able to sync my iPhone after restoring it. Can anyone help?
Download iTunes 11 from the Apple site and reinstall. The error message was quite plain in telling you what to do to resolve the error.
-
When I started up itunes on my PC I get this error: a required itunes component is not installed. please repair or reinstall ituens (-42404). How can I fixed this? I uninstalled it at least 6 times. Not exactly sure what I'm suppose to repair either. It also says it is syncing my ipod but when I go to disconnect/eject my ipod it says that it is unable to disconnect because files are being used in a program. When it finally disconnects there is no music on my ipod. The gym just ***** with out my ipod. Makes it eiser to not go! Someone please help me!
Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
http://support.apple.com/kb/HT1923
B-rock -
Flash builder 4.7 iOS Debug Binary (IDB) component is not installed.
I get the error below consistantly. Is the IDB supposed to be part of the flex 4.6 sdk or part of an air sdk? (I've not seen it in either)
Some components required to launch the application were not found. Please reinstall the AIR SDK and try again.
The iOS Debug Binary (IDB) component is not installed.Hi ,
Flex SDK 4.6 has AIR 3.1 which doesn't have the support of IDB. So, if you wanted to use USB debugging for iOS, please create an ActionScript Mobile Project which has AIR 3.4 that supports IDB, else download the AIR SDK 3.4 and overlay it on Flex 4.6 SDk.
AIR SDK download link: http://www.adobe.com/devnet/air/air-sdk-download.html
Overlay help document link : http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk. html
Hope this helps.
Thanks,
Hari -
TS2830 OW TO SOLVE: REQUIRED ITUNES COMPONENT IS NOT INSTALLED (-42404)
At time of starting my computer i found no icon for itunes on the desktop (although it was installed). reactivated from the search program it gave me the following message: a rquired itunes component is not installed (-42404). I've re installed itunes but message never been removed. When I've connected my iphone 4s I've got another message that itunes could not connect with my iphone and need to restore it to factory setting.????!!!!!!!!!!! help is highly appreciated.
If you're using Windows you may have to uninstall iTunes first:
Overview
In some rare instances, it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Follow the instructions here: http://support.apple.com/kb/HT1923 -
Dear Sir,
Oracle 8i is not installing in my system. The setup comes within a fraction of seconds without raising any error . I have PIV 1.5 GHZ with 128 MB RAM. I tried with Win NT,Win 2000,
Win 2000 Advanced Server, Win XP but i faced the same problem in all the versions. There is also problem with JRE and java.There are problems with Pentium IV
Known Software Issue(s)
CPUID detection for Intel. Pentium. 4 processor system:
Intel has identified that applications which use the Symantec Just in Time Compiler library file ("symcjit.dll" for Microsoft Windows* operating system and "symc_jlt.nlm" for Novell Netware* 5.1) may not run properly on Pentium. 4 processor systems because the library does not properly identify the processor. The failure typically is that the affected application such as Oracle 8i, simply terminates. Under Microsoft Windows*, the properties of the DLL are: "Symantec Java! JustInTime Compiler Version 3.10.107 for JDK 1.2 Copyright (C) 1996-99 Symantec Corporation Dynamic Link Library file". DLLs older than this will also not work. To confirm the version you are using, select the DLL, right click on the selected DLL and select Properties, and then the Version tab. Intel encourages all Software developers to do the following immediately:
Check if your application(s) uses the Symantec Just in Time Library file
Request an updated library file from your provider
Test your application with the new library file on Pentium. 4 processor system
Ensure you have plans in place to provide application updates and address customer concerns
*Other brands and names are property of their respective owners
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the post-install
configuration tools will also be affected. Running these tools with "-nojit"
specified will avoid the hang, but it is not simple to specify "-nojit" for
some of the products.
The following workaround works for the Windows operating system:
a. Copy only the install directory from the CD to the hard disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications (Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard drive (i.e.
e:\temp\install\win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the absolute
locations are specified.
Choose a Custom install and choose not to create a database during the
install. This way, the Database Configuration Assistant will not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and there is no way
to suppress it. You will need to kill the Net8 Configuration Assistant if it
hangs due to the bug. The installation still will have been successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8 Configuration
Assistant" and click "Stop". If that does not work, look for the most recent
JRE process using the Task Manager, and kill it manually. NOTE: the OUI
itself will also have a jre process. Be sure to kill the one with the most
recent date, which should be the jre process being used for Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through the installation
to the "End of Installation" screen, you should modify the configuration tools
to use "-nojit", then call the appropriate tools from the Start Menu.
Once installation is complete, each of the following files in the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit -classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4 (IV) PROCESSORS
INSTALLER FAILS WHEN RUNNING ON NEW INTEL PENTIUM 4 (IV) PROCESSORS -
After installing Final cut server client on OSX 10.6.8 error: Apple QuickTime or the QuickTime Java component is not installed.
I know this error on windows machines but cannot get a solution for OSX.I have fixed this by installing the latest combo update
Maybe you are looking for
-
Any Apps for HP Deskjet 3520 e-all-in-one
are there any apps on the eprint center that will work on my HP Deskjet 3520 e-all-in-one This question was solved. View Solution.
-
Mapping shares based on ADS Group membership
Hello, I am a pc person and do not know much about Macs. I have been charged to find a way to attach all of our new macs to our Active Directory. I have been able to bind a test machine to the directory and get the home share. Now the "higher ups" wa
-
Date search help in module pool programming in 4.6C version
Hi Experts, How can i have input help in my module pool screen, I gave the searh help EXT_DATE in the search help parameter of that screen's field parameter. But its not showing the input help. I m facing this issue in 4.6C. Please advise Thanks Yoge
-
I want a 'date', on front page, to be reflected on all my headers automatically.
I have a document which has a date which is changed manually with every revision. Now I want that date to be reflected on headers automatically without manually editing header every time.
-
Webcenter Post Installation Error 404 when trying validate /Webcenter
I am new to the Oracle stack, I have been trying to install Oracle Webcenter Portal in a test single node vmware instance. OS/ Oracle Linux 5.x 64bit DB/ Oracle 11gR2 Ent Schema/ RCU 11.1.1.7.0_64 OFM WC/ 11.1.1.7.0 OFM WL/ wls1036 JDK-JRE/ jrockit-j